The document summarizes two omnidirectional antenna models for 5 GHz wireless applications. The 029401 model provides 6dBi gain and the 029402 provides 9dBi gain. Both are designed to withstand harsh environments. They include mounting hardware and terminate with N connectors. Key specifications include frequency range, gain, bandwidth, power handling, beamwidth, size, and weight. Mounting options include poles, ceilings, or surfaces.
RG58 and LMR400 all coax cables. This article is going to talk about the detailed information about RG58 and LMR400, and interpret the differences between them.
If you want to learn more, try to follow the below link to see the article.
https://www.utmel.com/components/rg58-vs-lmr400-which-one-is-better?id=1492
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
RG58 and LMR400 all coax cables. This article is going to talk about the detailed information about RG58 and LMR400, and interpret the differences between them.
If you want to learn more, try to follow the below link to see the article.
https://www.utmel.com/components/rg58-vs-lmr400-which-one-is-better?id=1492
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
Direct Connection Cellular/PCS Dual-Band Amplifier (811201) (quantum-wireless...Ari Zoldan
• Improves voice and data signal quality
• Improves data communication rates needed for 3G technologies
• Power control logic ensures maximum output power is within cellular network standards
• Automatic gain control
• Automatic shutdown on overload.
• Advanced electronics receive and transmit better than a cell phone or cellular data card
• Connects directly to a cell phone or cellular data card with a Wilson antenna adapter
• Mobile, marine and in-building use
• DC power supply included - AC power supply sold separately
• Greatly reduces disconnects, drop outs, and noise
• Transmits signal energy to the outside antenna
• FCC and IC type accepted
Introducing Siemon’s new Field-Terminated Plug for custom-length direct connections to wireless access points, security cameras, LED lights, distributed antenna systems (DAS), building automation devices and any other IP-based and PoE-enabled devices deployed in today’s converged networks.
Direct Connection Cellular/PCS Dual-Band Amplifier (811201) (quantum-wireless...Ari Zoldan
• Improves voice and data signal quality
• Improves data communication rates needed for 3G technologies
• Power control logic ensures maximum output power is within cellular network standards
• Automatic gain control
• Automatic shutdown on overload.
• Advanced electronics receive and transmit better than a cell phone or cellular data card
• Connects directly to a cell phone or cellular data card with a Wilson antenna adapter
• Mobile, marine and in-building use
• DC power supply included - AC power supply sold separately
• Greatly reduces disconnects, drop outs, and noise
• Transmits signal energy to the outside antenna
• FCC and IC type accepted
Introducing Siemon’s new Field-Terminated Plug for custom-length direct connections to wireless access points, security cameras, LED lights, distributed antenna systems (DAS), building automation devices and any other IP-based and PoE-enabled devices deployed in today’s converged networks.
I4U, Mezclando los mundos Telco e Internet para llegar al usuarioLuis Angel Galindo
Esta es la presentación de la iniciativa I4U hecha para alumnos de doctorado de la UPM. I4U pretende mezclar los mundos del Web 2.0 e IMS para coger lo mejor de cada mundo y ser capaces de ofrecer servicios ágiles, servicios para la gente y por la gente
2008 IEEE AP-S-Internal Wideband Monopole Antenna For MIMO Access-Point Appli...Saou-Wen Su
A three-antenna MIMO system capable of generating a wide operating bandwidth of 2400-5850 MHz for access-point applications is introduced. The proposed design is based on a bent metal-plate monopole antenna with a compact size of 20 × 20 × 14 mm3. The three antennas are equally spaced along the perimeter of a circular ground and all generate a wide bandwidth of larger than 4 GHz. With the antenna short-circuiting facing the center of the ground, not only the overall antenna size is reduced but also good isolation of less than -20 dB can easily be obtained. Calculated envelope correlation is also less than 0.002 across the operating band.
The antennas in the cellular broadcasting sites are the bases producing radio wave radiation that is transferred during the course of the region of each cellular cell served. These antennas are planned to deliver broadcast and reception to and from cellular phones. we are offer rf celluar antenna in delhi, mumbai, chennai and bangalore.
A cellular antenna, also known as a cell tower or base station, is a structure that facilitates wireless communication between mobile devices (such as smartphones) and the cellular network. These antennas play a crucial role in enabling voice calls, text messaging, and data transmission for mobile phone users.
Cellular antennas are typically installed on tall towers or buildings to maximize coverage and signal strength. They are strategically placed throughout an area to create a network of overlapping coverage areas, forming a cellular infrastructure.
Dockon Compound PxM Loop (CPL) Antenna Joe Keipert
Dockon, Inc. has introduced the first commercially available Compound PxM Loop (CPL™) antenna for embedded product designs. The Dockon reference design CPL™ antenna increases radiation efficiency, intensity, directivity (gain) and radiated power for a given input in a small package.
2007 IEEE AP-S-Internal UWB Metal-Plate Monopole Antenna for a Wireless USB D...Saou-Wen Su
A novel ultra-wideband (UWB) monopole antenna suitable to be mounted on the printed circuit board (PCB) of a wireless universal serial bus (USB) dongle as an internal antenna is presented. The proposed antenna in the study is a U-shaped metal plate monopole antenna easily fabricated from bending a simple metal plate onto a foam base of a compact size of 6 x 11 x 20 mm3. The antenna mainly comprises a pair of wide-ended radiating arms and a bevelled feeding transition. When the antenna is mounted at the top portion of the PCB, one end of the radiating arm is also short-circuited to the system ground plane. With the proposed antenna structure, which can provide a very wide operating bandwidth of larger than 7.6 GHz, the antenna’s impedance bandwidth can easily cover the 3.1–10.6 GHz UWB band.
One Testhead for Both Inline and Offline
No more investment waste
Field Upgradeable
Fully Agilent
Smallest ICT In the World
850mm in length
Largest bottom side clearance
ICT with full powered testing capabilities
2009 EuCAP-Hybrid of Monopole and Dipole Antennas for Concurrent WLAN APSaou-Wen Su
A novel hybrid of a 2.4-GHz monopole antenna and a 5-GHz dipole antenna is presented to provide concurrent 2.4 and 5 GHz band operation for access- point applications. The two antennas are arranged in a collinear structure and printed on a compact dielectric substrate with dimensions 12 mm × 60 mm. The monopole antenna has a meandered radiating strip and is short-circuited to a small ground plane through a shorting strip. The dipole antenna includes two sub-dipoles at the opposite side of a narrow ground plane and fed by a simple T-junction microstrip-line network. The two antennas are closely set with a distance of 1 mm only, yet good port isolation (S21) well below –20 dB can be obtained. With a low profile, the proposed design can easily fit into the casing of some standard access points and allow the 2.4 and 5 GHz band signals to be simultaneously received or transmitted with no external diplexer required. Good omnidirectional radiation has been observed too.
Panorama produces a wide range of high-performance Cellular / LTE & WiFi antennas, trusted by public safety providers, utilities and transportation companies all over the world.
With a focus on engineering innovative products that set the industry standard in functionality, many of our products are used as a standard kit by OEMs, network providers, emergency services and organisations with fleet vehicles.
The new Panorama Antennas Cellular & WiFi catalogue includes antennas featuring: 4G / 3G / 2G frequencies from 698 - 960MHz and 1710 - 3800MHz **** Global Positioning (GPS / GLONASS / Galileo / Beidou) from 1562 – 1612 MHz with 26dB gain LNA **** WiFi frequencies from 2.4/5.8GHz SiSo and MiMo (2x2, 3x3) **** VHF, UHF and 7/800MHz band supporting networks using this technology including ESN (UK), P25 (USA), FirstNet (USA), Airwave (UK), BDBOS (Germany), Astrid (Belgium), TETRA (global) and much more.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
1. Professional Wireless Products
5 GHz Omni Antennas
Model: 029401 & 029402
Omni-Directional Site/Access Point
6 and 9dBi Omni for multipoint
applications
Unique design allows economical
build out
Mounting kit includes all hardware
needed
Models available for 5.15 -5.83GHz
ODN Series
Benelec high frequency Omni Directional antennas are These antennas can withstand the harshest environments of
designed for the new microwave systems, including U-Nll snow, wind, rain and ice.
networking. These advanced designs accommodate high-
speed wideband performance. The antennas are supplied with hardware that allows pole,
ceiling or surface/offset mount. Supplied quot;uquot; Bolts allow
The Omni antennas use an array of uniquely phased vertical mounting to a pole up to 51 mm (2quot;) in diameter. The
elements. They provide a uniform pattern and excellent antennas terminate with a female N connector.
frequency response. The 0DN Series are free space
antennas; no ground plane is required. Model Description Frequency
029401 6dBi Omni Directional 5.72-5.83GHz
The array is enclosed in an extremely tough white fiberglass
029402 9dBi Omni Directional 5.72-5.83GHz
Radome. The Radome is only 25mm in diameter. Wind
loading on the antennas is negligible. The antenna feed
assembly is made of precision-machined aluminium. The Special configurations are available upon request. Please
exterior aluminium body is irridited for weather protection. consult factory for more information.
Specifications
Frequency/Gain: See above Max Wind Velocity: 160 kph all models
Bandwidth @2:1 SWR: See Above OD Series Material: White Fibreglass Radome,
Impedance: 50 ohms nominal machine aluminium body
Maximum Power: 100 watts Weight: <0.5 kg
ODN6 Beamwidth: 25 El, 360 Az Mounting: Pole or surface (offset) mount
ODN9 Beamwidth: 14 El, 360 Az hardware included
Lighting Protection: External recommended Mounting Dimension: Mounts up to 51mm mast,
ODN6 Antenna Size: 406mm L x 25mm Connector: N female
ODN9 Antenna Size: 508mm L x 25mm
BENELEC Pty Ltd (Inc. in NSW) A.C.N. 064 708 390 Telephone: +61-2-9364 7000 Mail: P.O. Box 21
581-587 Gardeners Road, Mascot N.S.W. 2020 Fax: +61-2-9364 7099 Mascot, N.S.W. 1460
Sydney, Australia Website: www.benelec.com.au Australia
Email: inquiries@benelec.com.au