WHAT IS ASME? WHO IS ASME? WHAT ASME SECTION IX MEANS? WHAT ARE WELDING DOCUM...DixitJoshi5
PDF file for ASME SECTION IX and what is ASME. It will also give you information about WPS, PQR and WPQ. here you will get all that you want to know about WELDING DOCUMENTS.
These bypass indicators form an integral part of an industrial process tank. A pipe is mounted on the side of the tank by means of two process connections. This ensures that the level in the tank corresponds exactly to the level in the pipe. A magnetized float within the pipe activates red/white magnetic rollers, providing a visual indication of fluid level within the tank. Level sensors mounted on the unit will give a 4-20mA output or 0 to 100% output. Magnetic switches will give a high or low alarm.
Manufacturers and Suppliers of Over Head Transmission Line Material like Gang Operated Air Break Switch, AB Switches, Electrical Bushing, Electrical Fuses, Dropout Fuse, Horn Gap Fuse such as Solid Core DO Fuse, AB Switch Tilting Type, AB Switch Rotating Type, AB Switch Double Tilting Type, AB Switch 2 Post Type, DO Double Stack Fuse, DO Solidcore Fuse, DO Fuse, Double Stack Rotating Isolators, Solid Core Rotating Isolator, 66 KV Isolators, Stay Set With, Stay Wire and ACSR.
WHAT IS ASME? WHO IS ASME? WHAT ASME SECTION IX MEANS? WHAT ARE WELDING DOCUM...DixitJoshi5
PDF file for ASME SECTION IX and what is ASME. It will also give you information about WPS, PQR and WPQ. here you will get all that you want to know about WELDING DOCUMENTS.
These bypass indicators form an integral part of an industrial process tank. A pipe is mounted on the side of the tank by means of two process connections. This ensures that the level in the tank corresponds exactly to the level in the pipe. A magnetized float within the pipe activates red/white magnetic rollers, providing a visual indication of fluid level within the tank. Level sensors mounted on the unit will give a 4-20mA output or 0 to 100% output. Magnetic switches will give a high or low alarm.
Manufacturers and Suppliers of Over Head Transmission Line Material like Gang Operated Air Break Switch, AB Switches, Electrical Bushing, Electrical Fuses, Dropout Fuse, Horn Gap Fuse such as Solid Core DO Fuse, AB Switch Tilting Type, AB Switch Rotating Type, AB Switch Double Tilting Type, AB Switch 2 Post Type, DO Double Stack Fuse, DO Solidcore Fuse, DO Fuse, Double Stack Rotating Isolators, Solid Core Rotating Isolator, 66 KV Isolators, Stay Set With, Stay Wire and ACSR.
Discover the secret to a lower coefficient of friction while premitting translational motion or movement with the supporting element. Learn about the different types of slide plates and pipe rollers used for various applications. View the design, load capabilities, and installation and maintenance guidelines for both slide plates and pipe rollers.
Discover the secret to a lower coefficient of friction while permitting translational motion or movement with the supporting element. Learn about the different types of slide plates and pipe rollers used for various applications. View the design, load capabilities, and installation and maintenance guidelines for both slide plates and pipe rollers. See numerous photos featuring combinations with other critical pipe supports in order to allow for movement or a low coefficient of friction.
Discover the secret to a lower coefficient of friction while permitting translational motion or movement with the supporting element. Learn about the different types of slide plates and pipe rollers used for various applications. View the design, load capabilities, and installation and maintenance guidelines for both slide plates and pipe rollers. See numerous photos featuring combinations with other critical pipe supports in order to allow for movement or a low coefficient of friction.
With the largest chrome inventory in the world, Sunny Steel carries a wide range of ASTM A335 / ASME SA335 chrome moly alloy pipe in a variety of lengths, ODs, IDs and wall thicknesses to meet your project’s needs—including pipe in hard-to-find sizes.
1. Larry Sanchez
24615 Colonial Maple Dr.
Katy, TX 77493
Cell: (281) 650 3802
E-mail: larry7268@Gmail.com
Current Employer Hoover Containers Solutions 9/15- 5/16
Hoover Containers Solutions
2135 Highway 6 South
Houston, TX 77077
(281) 870-8402
Supervisor: John Weiser
Spencer Ogden Energy Temp. Service
General Welder
Specialty Custom Weld Department,drum cover,steam coils,
Sub-Assembly,order puller,Air test,cut,grind,bevel,fit up pipe,niples,flanges
Welding Process
GTAW, GMAW, Spray Auto Weld, 308 S/S, 316 S/S, Certified 3G
Previous Employment Gaumer Process 7/15 - 9/15
Gaumer Process
13616 Hempstead Rd.
Houston, TX 7770
(713)460-5200
Manager: Tony
Aeroteck Temp. Service
General Welder
Process Flange Heaters
GTAW (certified)
Exotic metals
NO-8800 Incoloy
Monel/Hastoloy/Ernicrmo-3/ 316SS/ CS
Wire assembly,Hydro Test,cut, grind,modfy internel component for electrical box
Drill and tap holes,paint if required
Norriseal –Wellmark 02/06 - 05/15
A Dover Resource Division
11122 W. Little York
PO Box: 40525
Houston, TX 77240-0525
(713) 466-3552
Manager: Pablo Solorzano
Lead Man: John Paulk
2. General Welder
Certified Welder ASME Sect. IX 2010
Fitter welder, Fabrication
Pipe,tubeing, Flanges, most jobs are done on Turn table,roll out
All other internal components- Carbon /316 SS
Experance in all Shop tools,Assembly,Departments
Welding Process (certified)
GTAW ,GMAW,PULSE,SILVER SODER
XRAY
Spray Arc-Auto welding ,Torch,Plasma
304,308,316-S/S ER70S6 CS
Behl Precision Fabricating 08/05 - 12/05
Sheet Metal (Temp service)
Suntron (Previously K-Tec Electronics) 01/02 - 07/05
1111 Gillingham Ln.
Sugarland, TX 77478
(281) 243-5000
General Welder and Processing
Lead Man 1st
shift
Precision sheet metal, square tubeing, structural, fitter, and fabrication welding.
Cut, grind,fitup for modify,First article parts welder,production time study
Experienced in Tube Laser
Certified Operator
All sit down and standing forklifts
Crane operator and Safety training
GMAW (certified)
GTAW (certified)
ALLOYS
Carbon steel, 316S/S, 5052 Alum
Norriseal Controls 07/01 – 01/02
A Dover Resource Division
11122 W. Little York
Houston, TX 77240-0525
(713) 466-3552
General Welder
Certified Welder (ASME Sect. IX QW-301)
Fitter and Fabrication
Weld butterfly valves
Level control
Pipe and Flanges
Welding Process
GMAW (certified)
GTAW (certified)
3. Automatic Spray Arc Welder
Soldering
X-Ray Experience
K-Tec Electronics 11/99 – 07/01
1111 Gillingham Ln.
Sugarland, TX 77478
(281) 243-5000
General Welder and Processing
Sheet metal and tubing precision, structural, and fabrication welding
GTAW (certified)
GMAW(certified)
Experience in Tube laser
Certified Operator
All sit down and standing forklifts
Crane operator and Safety training
S&S Technology 04/99 – 10/99
10625 Telge Rd.
Houston, TX 77095
(281) 815-1300
General Welder and Processing
Fabrications sheet metal and square tubing
GMAW
GTAW
Carbon, 316 SS, Alum
Norriseal Controls 09/97– 03/99
A Dover Resource Division
11122 W. Little York
Houston, TX 77240-0525
(713) 466-3552
General Welder
Certified Welder (ASME Sect. IX QW-301)
Weld butterfly valves
Level control
Fitter and Fabrication
Pipe and Flanges
Welding Process
GMAW (certified)
GTAW (certified)
Automatic Spray Arc Welder
Soldering
4. X-Ray Experienced
Adams Valves Inc. 09/94 – 09/97
10649 Haddington Dr. #160
Houston, TX 77043
(713) 937-2490
Personal Summary and Strengths
I am hard working, well organized and dependable. I take the initiative to help
solve shop problems such as recommending efficient and cost saving ideas. I
take pride in my workmanship and have a strong work ethic.
References Professional and personal references provided upon request.