2014 ieee project plc based title
•Download as DOC, PDF•
0 likes•955 views
This document lists 15 titles related to programmable logic controllers (PLCs), industrial automation systems, networked control systems, and FPGA implementations. The titles cover topics such as PLC-based implementation of industrial automation, modeling and control of DC/DC converters using PSoC, Bayesian reliability analysis of PLC systems, remote laboratory control using PLCs and EJS applets, predictive consumption models for electro-pneumatic production systems, arc fault detection in switchgear, and precision control of modular robot manipulators using FPGA-based control.
Report
Share
Report
Share
![PLC BASED TITLE 2013-14
1. On the Implementation of Industrial Automation Systems Based on PLC
2. Performance of HTTP Protocol in Networked Control Systems
3. Small-Signal Modeling of Active-Clamped ZVS Current-Fed Full-Bridge Isolated DC/DC Converter
and Control System Implementation Using PSoC
4. Remote Control Laboratory Using EJS Applets and Twin CAT Programmable Logic Controllers
5. Bayesian-Network-Based Reliability Analysis of PLC Systems
6. Performance of HTTP Protocol in Networked Control Systems
7. Automata-Based Railway Signaling and Interlocking System Design [Testing Ourselves]
8. Predictive Consumption Models for Electro pneumatic Production Systems
9. Preemptive Arc Fault Detection Techniques in Switchgear and Control gear
10. Development of PLC-Based Software for Increasing the Dependability of Production Automation
Systems
11. Automatic Generation of the Supervisor Code for Industrial Switched-Mode Systems
12. A Switching Control Strategy for the Reduction of Torque Ripple for PMSM
13. PMSM sliding mode FPGA-based control for torque ripple reduction
14. Precision Control of Modular Robot Manipulators: The VDC Approach with Embedded FPGA
15. A Programmable Controller IC for DC/DC Converter and Power Factor Correction Applications
16. FPGA Implementation of Sliding-Mode-Control Algorithm for Scaled Bilateral Tele-operation](https://image.slidesharecdn.com/2014ieeeprojectplcbasedtitle-140110101641-phpapp01/85/2014-ieee-project-plc-based-title-1-320.jpg)
Recommended
The design and implementation of power earth line monitoring system
The document describes a proposed power earth-line monitoring system that uses GSM communications to collect, record, and display physical parameters of earth lines during power line construction and maintenance. The existing manual earth line inspection system is time-consuming and difficult for fault identification. The proposed system addresses this by using an intelligent earth monitor connected to a GSM modem to transmit earth line state data via short messages. When installed, it can detect if the earth line is connected or disconnected and display this information at a remote monitoring center. The system has hardware components like a microcontroller, sensors, and GSM modem and requires software like Embedded C and a VB program for monitoring.
Intelligence monitoring system based on arm and information fusion
This document proposes an intelligent monitoring system based on an ARM microcontroller and information fusion. It uses an ARM7 microcontroller to interface with sensors that measure temperature, humidity, and gas levels. The sensor values are transmitted to a PC via serial communication and uploaded to the internet, allowing for remote monitoring. This provides faster and more real-time monitoring compared to existing low-speed processor-based systems. The system aims to address monitoring needs for electrical equipment through an affordable design using ARM embedded technology and information fusion.
Research on alarm system of railway crossing based on gps and gprs
for mtech,btech, ece, eee, embedded, matlab,vlsi projects contact@ srcembedded solutions, hyderabad
web: www.srcembedded.com
mail: srcembedded@gmail.com
ph. 8297 313 858
Understanding the Electronics
This document provides an overview of the components included in Roby's Electronics kit, which contains boards and parts to assemble a robot named Roby. The kit includes a mainboard, Bluetooth board, servo driver board, gyroscope board, two stepper motor driver boards, battery holder, cables, two servos, and two stepper motors. The mainboard connects the various peripheral boards and controls the robot. Additional boards interface with the Bluetooth, servos, gyroscope, and stepper motors to provide functionality. Instructions provide details on connecting and using the components to assemble and operate Roby.
Speed checker for highways
This document describes a speed checker device for highways that monitors vehicle speed and alerts traffic authorities of speed limit violations. The speed checker uses infrared sensors spaced 1 meter apart to measure the time it takes a vehicle to pass between the sensors. It then calculates the vehicle's speed and sounds an alarm if the speed exceeds the highway limit. This allows traffic authorities to be notified of speeding vehicles and helps reduce accidents. The speed checker provides a simple alternative to more complex radar and laser-based speed guns by measuring time of flight between two infrared beams to calculate a vehicle's speed as it passes.
Automatic Crack Detecting system for Railway security
This document presents a project for a monitoring and detection system for railway security. The system aims to address issues like train collisions, derailments, and accidents by using sensors like ultrasonic sensors and vibration sensors to detect obstacles on the track. It also uses components like microcontrollers, ZigBee for wireless communication, and servo motors for automated railway gate control. The system is able to sense trains from long distances, warn other trains of potential collisions, and prevent accidents through automated brake control and railway gate closure. Simulation results show that the system can help reduce railway collisions and save lives.
ADVANCED AUTOMATIC RAILWAY GATE CONTROLLING
This document describes a project to automatically control a railway gate using a microcontroller. The system uses a vibration sensor to detect when a train is approaching, which triggers an alarm and closes the gate using a stepper motor. An AT89C52 microcontroller is used to manage the control system and avoid accidents at unmanned railway crossings. The hardware components include the microcontroller, vibration sensor, stepper motor, motor driver, and buzzer. The software used includes Keil IDE and Proteus for circuit simulation. The project aims to provide accurate train detection and automatic gate operation for human safety without requiring human control of the gates.
Applications of power electronic device to power system
This presentation summarizes power electronic devices used in power systems, including the SCR and TRIAC. It describes the introduction, structure, operating modes, characteristics and applications of the SCR. The SCR's applications include motor starters and regulators. It also discusses the TRIAC's structure, operating quadrants, VI characteristics and applications such as LED drivers for street lighting. The presentation concludes with noting that power systems are networks for supplying, transferring and using electrical power to homes and industry.
Recommended
The design and implementation of power earth line monitoring system
The document describes a proposed power earth-line monitoring system that uses GSM communications to collect, record, and display physical parameters of earth lines during power line construction and maintenance. The existing manual earth line inspection system is time-consuming and difficult for fault identification. The proposed system addresses this by using an intelligent earth monitor connected to a GSM modem to transmit earth line state data via short messages. When installed, it can detect if the earth line is connected or disconnected and display this information at a remote monitoring center. The system has hardware components like a microcontroller, sensors, and GSM modem and requires software like Embedded C and a VB program for monitoring.
Intelligence monitoring system based on arm and information fusion
This document proposes an intelligent monitoring system based on an ARM microcontroller and information fusion. It uses an ARM7 microcontroller to interface with sensors that measure temperature, humidity, and gas levels. The sensor values are transmitted to a PC via serial communication and uploaded to the internet, allowing for remote monitoring. This provides faster and more real-time monitoring compared to existing low-speed processor-based systems. The system aims to address monitoring needs for electrical equipment through an affordable design using ARM embedded technology and information fusion.
Research on alarm system of railway crossing based on gps and gprs
for mtech,btech, ece, eee, embedded, matlab,vlsi projects contact@ srcembedded solutions, hyderabad
web: www.srcembedded.com
mail: srcembedded@gmail.com
ph. 8297 313 858
Understanding the Electronics
This document provides an overview of the components included in Roby's Electronics kit, which contains boards and parts to assemble a robot named Roby. The kit includes a mainboard, Bluetooth board, servo driver board, gyroscope board, two stepper motor driver boards, battery holder, cables, two servos, and two stepper motors. The mainboard connects the various peripheral boards and controls the robot. Additional boards interface with the Bluetooth, servos, gyroscope, and stepper motors to provide functionality. Instructions provide details on connecting and using the components to assemble and operate Roby.
Speed checker for highways
This document describes a speed checker device for highways that monitors vehicle speed and alerts traffic authorities of speed limit violations. The speed checker uses infrared sensors spaced 1 meter apart to measure the time it takes a vehicle to pass between the sensors. It then calculates the vehicle's speed and sounds an alarm if the speed exceeds the highway limit. This allows traffic authorities to be notified of speeding vehicles and helps reduce accidents. The speed checker provides a simple alternative to more complex radar and laser-based speed guns by measuring time of flight between two infrared beams to calculate a vehicle's speed as it passes.
Automatic Crack Detecting system for Railway security
This document presents a project for a monitoring and detection system for railway security. The system aims to address issues like train collisions, derailments, and accidents by using sensors like ultrasonic sensors and vibration sensors to detect obstacles on the track. It also uses components like microcontrollers, ZigBee for wireless communication, and servo motors for automated railway gate control. The system is able to sense trains from long distances, warn other trains of potential collisions, and prevent accidents through automated brake control and railway gate closure. Simulation results show that the system can help reduce railway collisions and save lives.
ADVANCED AUTOMATIC RAILWAY GATE CONTROLLING
This document describes a project to automatically control a railway gate using a microcontroller. The system uses a vibration sensor to detect when a train is approaching, which triggers an alarm and closes the gate using a stepper motor. An AT89C52 microcontroller is used to manage the control system and avoid accidents at unmanned railway crossings. The hardware components include the microcontroller, vibration sensor, stepper motor, motor driver, and buzzer. The software used includes Keil IDE and Proteus for circuit simulation. The project aims to provide accurate train detection and automatic gate operation for human safety without requiring human control of the gates.
Applications of power electronic device to power system
This presentation summarizes power electronic devices used in power systems, including the SCR and TRIAC. It describes the introduction, structure, operating modes, characteristics and applications of the SCR. The SCR's applications include motor starters and regulators. It also discusses the TRIAC's structure, operating quadrants, VI characteristics and applications such as LED drivers for street lighting. The presentation concludes with noting that power systems are networks for supplying, transferring and using electrical power to homes and industry.
Password based circuit breaker control to ensure electric
This document describes a password-based circuit breaker control system to ensure the safety of electric line workers. The system uses a PIC16F877A microcontroller and requires a line worker to enter a password to turn the circuit breaker on or off. This allows the line worker to safely repair power lines by turning off the supply, completing repairs, and then returning to the substation to turn the power back on by entering the correct password. The system indicators and password entry is controlled by the microcontroller.
A review paper on closed loop control of bldc motor using fuzzy logic
This document reviews a closed loop control method for a brushless DC motor (BLDC) using a fuzzy logic controller. It describes using a single current sensor on the DC link to estimate phase currents and avoid the cost of multiple sensors. The proposed system was simulated in MATLAB/Simulink using PI and fuzzy logic speed controllers. The simulation results showed that the fuzzy logic controller provided better motor speed control performance compared to the PI controller.
Nabil slide fyp1 new
This document describes a student's final year project to develop an electric train system using a microcontroller. The project aims to learn about train traction systems, gate control systems, passenger loading processes, and obstacle avoidance operations. The train will move along the track and stop at stations for loading. It will detect obstacles using ultrasonic sensors and gates using IR sensors. When developed, the system will help address Malaysia's lack of expertise in locomotive industries.
Gsm based automatic & manual device switch
This project allows remote control of equipment via SMS text messages sent to a microcontroller connected to a GSM modem. The microcontroller can control up to 8 external devices based on plain text commands like "pump on". It also enables setting automatic schedules to turn devices on and off. The hardware includes an 8-bit microcontroller, GSM modem, relays, RS232 converter, driver IC, and power supply. The software tools are Keil Cross Compiler, Top-View Simulator, and a flash programmer for the microcontroller.
Remote Control of Power Thefting Using Power Line Communication Systems
This document proposes a system to detect illegal electricity usage using automatic meter reading (AMR) and power line communication (PLC). The system involves installing two meters - one for AMR and another energy meter connected to a PLC modem. If the readings from the two meters do not match, it indicates illegal usage and the user can be disconnected remotely. The system aims to reduce distribution losses and increase profits for electricity departments by preventing various methods people use to avoid paying for electricity.
Development of on line monitoring system of substation power equipment based ...
The document proposes developing an online monitoring system for substation power equipment based on the IEEE1588 standard. This system would use a PIC microcontroller to sense temperature, current and voltage from sensors, store the data in EEPROM, and upload it to the internet via Ethernet. By implementing precise time synchronization between master and slave clocks over Ethernet using IEEE1588, the system allows real-time remote monitoring of substation status from anywhere.
Automatized railway gate controller
This document describes an automated railway gate controller project that uses infrared transmitters and receivers to automatically open and close railway gates based on the presence of an approaching train. When the train approaches the first reference point, the gate closes, and when the train passes the second reference point, the gate opens. The system utilizes amplitude shift keying modulation at 434MHz and a baud rate of 4800bps. An AT89S8253 microcontroller controls an IR transmitter LED and receiver to open and close the gate motor as trains pass through. The system aims to eliminate human error at unmanned railway crossings and reduce accidents.
Automatic railway gate control
Automatic Railway Gate Control
Project Objective :
Provide an automatic railway gate at a Level crossing replacing the gates operated by the gatekeeper to provide safety to the road users by reducing the accidents.
video URL :
http://www.youtube.com/watch?v=c0Z61bOQp8w
PRESENTATION THESIS
This document analyzes the automation system of a substation based on IEC 61850 standards using TOPCAL software. It discusses the architecture, components, and functions of the substation automation system (SAS), including monitoring, control, protection, and communication. The document also covers commissioning of the SAS human-machine interface, functional configuration, redundancy implementation, and availability calculations considering different component failure rates and numbers of integrated electronic device features. The results show the SAS availability is highest when using fewer IED features and lowest when using more features.
Simple Railway gate automation
Simplest possible way to get through unwanted presentations in easiest way.. Technically concept is made clear but not the controller and embedded coding part...
JVL MacTalk
MacTalk is setup and diagnosis software that allows users to easily configure and monitor MACxxx integrated servo motors. It allows adjustment of motor parameters, saving and loading of parameter files, and real-time monitoring of motor values and status. MacTalk also features online communication and firmware updates for motors and expansion modules. It has an automatic update function to check for and download new versions when connected to the internet.
Alcohol interlock
A PROJECT PPT ON ALCOHOL INTERLOCK
TO REDUCE DRUNK & DRIVE HAZARDS WE NEED A DEVICE WHICH CAN HELP US TO PREVENT SUCH DRIVERS THEY HAVE DRUNK .BY USING THIS DEVICE WE CAN REDUCE THE PROBABILITY OF DRUNK AND DRIVE ACCIDENTS.
THIS DEVICE IS BASED ON ARDIUNO ATMEGA328 MICRO CONTROLLER .
Micro controller based two wheeler theft controllers
This project presents a vehicle tracking system using GPS and GSM technology. The system tracks a vehicle's location via GPS and sends the coordinates as an SMS to the owner on request. It can also be connected to a car alarm to alert the owner by SMS if the alarm is triggered. The low-cost system consists of a GPS receiver, microcontroller, and GSM modem to process location data from satellites and send it via text message. It provides an affordable solution for monitoring vehicles and detecting theft.
A current controller design for current source inverter fed ac machine drive ...
This paper presents a design for a closed-loop current controller for a current source inverter-fed AC machine drive system. It employs a multiloop current controller with pole/zero cancellation and a transfer function matrix to decouple cross-coupling terms between the d- and q-axes reference frames. Two controller types are proposed using different decoupling methods. Additionally, active damping methods are included to improve stability. Simulations and experiments were conducted to evaluate the proposed current controller.
Idees emploi : synthèse des travaux sur l'emploi des seniors
Synthèse des travaux du Think Tank Idées Emploi sur l'emploi des seniors.
L'objectif était de proposer des pistes de réflexion pour faciliter l'accès à l'emploi des personnes de plus de 45 ans.
Ces travaux ont été réalisés online par un groupe de 81 personnes entre le 11 et le 14 janvier 2016) selon les méthodes de travail de co-construction du cabiner de conseil Caffe Dolce.
A generalized flow based method for analysis of implicit relationships on wik...
The document proposes a new method for analyzing implicit relationships between objects on Wikipedia pages. The method uses a generalized maximum flow approach that considers distance, connectivity, and cocitation, addressing limitations of prior methods. Experiments show the new method more appropriately measures relationship strength. Additionally, the method can identify elucidatory objects that help explain relationships.
Photography Tips
“Use your computer, laptop or smart phone to get expert advice with easy-to-follow instructions whenever you need it!”
So many new photographers and hobbyists get stuck on buying equipment. And they spend months hunting for ways to improve their skills.
Yet, after all that, your photos are average. Or worse.
Here’s the truth: it’s really NOT your fault!
I’m telling you, I’ve spent hundreds of hours digging through blogs and forums, reading books and manuals, watching YouTube and DVDs.
Guess what. After going through ALL of the training material out there, I’ve found NONE that will turn you into a pro, step-by-step.
They always have missing pieces. Questions without answers. Nobody says exactly how the best images are made.
You’re just expected to “spend a lot of time practicing”!
People believe that’s a good thing, but it can actually be wasted time and energy. Doing something over and over again is exhausting. It takes years to figure stuff out and become a professional that way… if you get there at all!
Download it here http://arts-entertainment.yessdeal.com/makes-powerful-photograph/
A high performance spwm controller for three-phase ups systems operating unde...
This paper presents a new high-performance controller design for three-phase uninterruptible power supply (UPS) systems operating under highly nonlinear loads. The controller improves on the classical sinusoidal pulsewidth modulation (SPWM) method by adding inner control loops that enable it to better compensate for harmonics and distortion caused by rectifier loads. The controller is developed and analyzed using Simulink and implemented on a TMS320F2808 DSP chip. Experimental results from a 10kVA UPS system show the controller successfully regulates voltages and meets total harmonic distortion and dynamic response standards for UPS systems.
2014 ieee project matlab titles
This document lists 20 IEEE projects from 2013 related to image processing, computer vision, and remote sensing. It provides contact information for ECWAY TECHNOLOGIES, an organization that offers software development and IEEE projects in various cities across India. The projects cover topics like stereo vision, change detection, image search, watermarking, face recognition, and vehicle detection using techniques such as reversible data hiding, wavelet transforms, and sparse representations.
Languagelab 8.4 - Complex Sentences
This document discusses complex sentences and their components. It provides examples of simple, compound, and complex sentences. Complex sentences use connectors like "because, if, since, although, when, after, in order that, til" to join an independent clause and dependent clause. The document ensures the reader understands what each connector means and identifies them in examples. It checks the reader's understanding of what makes a sentence complex and the differences between compound and complex sentences.
More Related Content
What's hot
Password based circuit breaker control to ensure electric
This document describes a password-based circuit breaker control system to ensure the safety of electric line workers. The system uses a PIC16F877A microcontroller and requires a line worker to enter a password to turn the circuit breaker on or off. This allows the line worker to safely repair power lines by turning off the supply, completing repairs, and then returning to the substation to turn the power back on by entering the correct password. The system indicators and password entry is controlled by the microcontroller.
A review paper on closed loop control of bldc motor using fuzzy logic
This document reviews a closed loop control method for a brushless DC motor (BLDC) using a fuzzy logic controller. It describes using a single current sensor on the DC link to estimate phase currents and avoid the cost of multiple sensors. The proposed system was simulated in MATLAB/Simulink using PI and fuzzy logic speed controllers. The simulation results showed that the fuzzy logic controller provided better motor speed control performance compared to the PI controller.
Nabil slide fyp1 new
This document describes a student's final year project to develop an electric train system using a microcontroller. The project aims to learn about train traction systems, gate control systems, passenger loading processes, and obstacle avoidance operations. The train will move along the track and stop at stations for loading. It will detect obstacles using ultrasonic sensors and gates using IR sensors. When developed, the system will help address Malaysia's lack of expertise in locomotive industries.
Gsm based automatic & manual device switch
This project allows remote control of equipment via SMS text messages sent to a microcontroller connected to a GSM modem. The microcontroller can control up to 8 external devices based on plain text commands like "pump on". It also enables setting automatic schedules to turn devices on and off. The hardware includes an 8-bit microcontroller, GSM modem, relays, RS232 converter, driver IC, and power supply. The software tools are Keil Cross Compiler, Top-View Simulator, and a flash programmer for the microcontroller.
Remote Control of Power Thefting Using Power Line Communication Systems
This document proposes a system to detect illegal electricity usage using automatic meter reading (AMR) and power line communication (PLC). The system involves installing two meters - one for AMR and another energy meter connected to a PLC modem. If the readings from the two meters do not match, it indicates illegal usage and the user can be disconnected remotely. The system aims to reduce distribution losses and increase profits for electricity departments by preventing various methods people use to avoid paying for electricity.
Development of on line monitoring system of substation power equipment based ...
The document proposes developing an online monitoring system for substation power equipment based on the IEEE1588 standard. This system would use a PIC microcontroller to sense temperature, current and voltage from sensors, store the data in EEPROM, and upload it to the internet via Ethernet. By implementing precise time synchronization between master and slave clocks over Ethernet using IEEE1588, the system allows real-time remote monitoring of substation status from anywhere.
Automatized railway gate controller
This document describes an automated railway gate controller project that uses infrared transmitters and receivers to automatically open and close railway gates based on the presence of an approaching train. When the train approaches the first reference point, the gate closes, and when the train passes the second reference point, the gate opens. The system utilizes amplitude shift keying modulation at 434MHz and a baud rate of 4800bps. An AT89S8253 microcontroller controls an IR transmitter LED and receiver to open and close the gate motor as trains pass through. The system aims to eliminate human error at unmanned railway crossings and reduce accidents.
Automatic railway gate control
Automatic Railway Gate Control
Project Objective :
Provide an automatic railway gate at a Level crossing replacing the gates operated by the gatekeeper to provide safety to the road users by reducing the accidents.
video URL :
http://www.youtube.com/watch?v=c0Z61bOQp8w
PRESENTATION THESIS
This document analyzes the automation system of a substation based on IEC 61850 standards using TOPCAL software. It discusses the architecture, components, and functions of the substation automation system (SAS), including monitoring, control, protection, and communication. The document also covers commissioning of the SAS human-machine interface, functional configuration, redundancy implementation, and availability calculations considering different component failure rates and numbers of integrated electronic device features. The results show the SAS availability is highest when using fewer IED features and lowest when using more features.
Simple Railway gate automation
Simplest possible way to get through unwanted presentations in easiest way.. Technically concept is made clear but not the controller and embedded coding part...
JVL MacTalk
MacTalk is setup and diagnosis software that allows users to easily configure and monitor MACxxx integrated servo motors. It allows adjustment of motor parameters, saving and loading of parameter files, and real-time monitoring of motor values and status. MacTalk also features online communication and firmware updates for motors and expansion modules. It has an automatic update function to check for and download new versions when connected to the internet.
Alcohol interlock
A PROJECT PPT ON ALCOHOL INTERLOCK
TO REDUCE DRUNK & DRIVE HAZARDS WE NEED A DEVICE WHICH CAN HELP US TO PREVENT SUCH DRIVERS THEY HAVE DRUNK .BY USING THIS DEVICE WE CAN REDUCE THE PROBABILITY OF DRUNK AND DRIVE ACCIDENTS.
THIS DEVICE IS BASED ON ARDIUNO ATMEGA328 MICRO CONTROLLER .
Micro controller based two wheeler theft controllers
This project presents a vehicle tracking system using GPS and GSM technology. The system tracks a vehicle's location via GPS and sends the coordinates as an SMS to the owner on request. It can also be connected to a car alarm to alert the owner by SMS if the alarm is triggered. The low-cost system consists of a GPS receiver, microcontroller, and GSM modem to process location data from satellites and send it via text message. It provides an affordable solution for monitoring vehicles and detecting theft.
What's hot (13)
Password based circuit breaker control to ensure electric
Password based circuit breaker control to ensure electric
A review paper on closed loop control of bldc motor using fuzzy logic
A review paper on closed loop control of bldc motor using fuzzy logic
Remote Control of Power Thefting Using Power Line Communication Systems
Remote Control of Power Thefting Using Power Line Communication Systems
Development of on line monitoring system of substation power equipment based ...
Development of on line monitoring system of substation power equipment based ...
Micro controller based two wheeler theft controllers
Micro controller based two wheeler theft controllers
Viewers also liked
A current controller design for current source inverter fed ac machine drive ...
This paper presents a design for a closed-loop current controller for a current source inverter-fed AC machine drive system. It employs a multiloop current controller with pole/zero cancellation and a transfer function matrix to decouple cross-coupling terms between the d- and q-axes reference frames. Two controller types are proposed using different decoupling methods. Additionally, active damping methods are included to improve stability. Simulations and experiments were conducted to evaluate the proposed current controller.
Idees emploi : synthèse des travaux sur l'emploi des seniors
Synthèse des travaux du Think Tank Idées Emploi sur l'emploi des seniors.
L'objectif était de proposer des pistes de réflexion pour faciliter l'accès à l'emploi des personnes de plus de 45 ans.
Ces travaux ont été réalisés online par un groupe de 81 personnes entre le 11 et le 14 janvier 2016) selon les méthodes de travail de co-construction du cabiner de conseil Caffe Dolce.
A generalized flow based method for analysis of implicit relationships on wik...
The document proposes a new method for analyzing implicit relationships between objects on Wikipedia pages. The method uses a generalized maximum flow approach that considers distance, connectivity, and cocitation, addressing limitations of prior methods. Experiments show the new method more appropriately measures relationship strength. Additionally, the method can identify elucidatory objects that help explain relationships.
Photography Tips
“Use your computer, laptop or smart phone to get expert advice with easy-to-follow instructions whenever you need it!”
So many new photographers and hobbyists get stuck on buying equipment. And they spend months hunting for ways to improve their skills.
Yet, after all that, your photos are average. Or worse.
Here’s the truth: it’s really NOT your fault!
I’m telling you, I’ve spent hundreds of hours digging through blogs and forums, reading books and manuals, watching YouTube and DVDs.
Guess what. After going through ALL of the training material out there, I’ve found NONE that will turn you into a pro, step-by-step.
They always have missing pieces. Questions without answers. Nobody says exactly how the best images are made.
You’re just expected to “spend a lot of time practicing”!
People believe that’s a good thing, but it can actually be wasted time and energy. Doing something over and over again is exhausting. It takes years to figure stuff out and become a professional that way… if you get there at all!
Download it here http://arts-entertainment.yessdeal.com/makes-powerful-photograph/
A high performance spwm controller for three-phase ups systems operating unde...
This paper presents a new high-performance controller design for three-phase uninterruptible power supply (UPS) systems operating under highly nonlinear loads. The controller improves on the classical sinusoidal pulsewidth modulation (SPWM) method by adding inner control loops that enable it to better compensate for harmonics and distortion caused by rectifier loads. The controller is developed and analyzed using Simulink and implemented on a TMS320F2808 DSP chip. Experimental results from a 10kVA UPS system show the controller successfully regulates voltages and meets total harmonic distortion and dynamic response standards for UPS systems.
2014 ieee project matlab titles
This document lists 20 IEEE projects from 2013 related to image processing, computer vision, and remote sensing. It provides contact information for ECWAY TECHNOLOGIES, an organization that offers software development and IEEE projects in various cities across India. The projects cover topics like stereo vision, change detection, image search, watermarking, face recognition, and vehicle detection using techniques such as reversible data hiding, wavelet transforms, and sparse representations.
Languagelab 8.4 - Complex Sentences
This document discusses complex sentences and their components. It provides examples of simple, compound, and complex sentences. Complex sentences use connectors like "because, if, since, although, when, after, in order that, til" to join an independent clause and dependent clause. The document ensures the reader understands what each connector means and identifies them in examples. It checks the reader's understanding of what makes a sentence complex and the differences between compound and complex sentences.
A proxy based approach to continuous location-based spatial queries in mobile...
This document proposes a proxy-based approach to continuous location-based spatial queries in mobile environments. The proxy creates estimated valid regions (EVRs) for mobile clients to reduce the number of queries submitted and load on the servers. For nearest-neighbor queries, the proxy uses two new algorithms to accelerate the growth of EVRs, allowing it to build effective EVRs even with small cache sizes. For window queries, the proxy represents EVRs as estimated window vectors to achieve larger valid regions. Separate index structures (EVR-tree and grid index) are used for nearest-neighbor and window queries respectively, and results from one type of query help improve the other. Experiments show the proposed approach significantly outperforms existing
2013 2014 ieee vlsi titles
This document lists 28 titles of papers presented at the 2013-2014 IEEE VLSI Symposia. The papers cover a wide range of topics related to VLSI systems including low power camera designs, turbo decoder architectures, on-chip voltage regulators, comparator designs, built-in self-test techniques, reconfigurable hardware, switched capacitor converters, latch designs, error correction, asynchronous logic circuits, delay lines, job scheduling, signal processors, DAC testing, FFT processors, fault modeling, soft error mitigation, validation, memristor memory, self-repair, network-on-chip, SAR ADCs, frequency synthesizers, power gating, BIST, random number generators, and analog built-in self-
2014 ieee project ns2 titles
This document lists 25 IEEE project titles from 2013 related to wireless networks and sensor networks. The projects cover topics such as capacity and delay optimization in wireless mesh networks, detection of spoofing attacks in wireless networks, distance bounding and location verification techniques, energy harvesting and management in sensor networks, traffic classification in networks, quality of service provisioning in cognitive radio networks, video multicast, target tracking in sensor networks, resource allocation in WiMAX networks, channel allocation and routing in hybrid wireless mesh networks, cross-layer design of congestion control, neighbor discovery in mobile ad hoc networks, data collection for mobile users in sensor networks, in-network estimation with delay constraints, mobile relay configuration, model-based analysis of wireless system architectures, exploiting contact
A new dc anti islanding technique of electrolytic capacitor-less photovoltaic...
This paper proposes a new photovoltaic (PV) interface for direct current (DC) distribution systems that eliminates electrolytic capacitors. The proposed interface improves system reliability and efficiency by removing electrolytic capacitors, reducing costs. It also introduces a new anti-islanding technique using injected current perturbation for protection. Experimental results show the prototype converter achieves over 98% maximum efficiency and the anti-islanding technique detects islanding in under 0.2 seconds with 99.9% average maximum power point tracking efficiency under normal conditions.
2014 ieee powerelectronics
Ecway Technologies provides IEEE power electronics and software development projects from their offices in multiple cities in India. They list over 100 project titles from 2013 in categories such as boost converter, boost rectifier, buck converter, DC-DC converter, induction heating, inverter, LED drive, motor drives, multilevel inverter, power factor correction, renewable energy, resonant converter, SEPIC converter, STATCOM, uninterruptible power supply, wind energy, Z source inverter, and battery charger. Project areas include analysis, design, control, and implementation. Ecway can be contacted by phone or email for more information.
Bb Collaborate Web Conferencing Guide
Notes from the Assistant provide helpful information or
reminders.
Warning: Warnings alert you to potential problems that could occur if
you do not follow the instructions properly.
Important: Important notes call attention to information that is
especially significant.
Typographical Conventions
The following typographical conventions are used in this guide:
n
Bold text is used to represent text or options that must be selected or entered, such as
menu items, dialog box options, and buttons. For example: "Select File > Save As."
n
Italic text is used to represent place holders for information you must supply, such as
file names or paths. For example: "Enter the file name _
Présentation pour la Vespérale Cloud Computing
This document discusses Business Together as a Service (B2GaaS), a unified communications as a service (uCaaS) offering from Orange Business Services for international clients. It outlines the evolution from PCs to cloud computing. B2GaaS provides a web portal and services including telephony, messaging, mobility, and video conferencing. The document describes Orange's data center infrastructure across regions and interconnections, as well as their team of 100 people. It also outlines a B2GaaS project for client 3M, including timeline, testing, and deployments. Details are provided on equipment used in the cloud, including cabling, firewalls, servers, and the initial 180 VMs planned.
Harga headlamp yamaha m-slaz thailand xabre pertamax7.com
Harga headlamp yamaha m-slaz thailand xabre pertamax7.com
http://pertamax7.com
A low cost web based remote monitoring system with built in security feature ...
This document describes a low-cost, web-based remote monitoring system with built-in security features for vulnerable environments. The system provides 24/7 monitoring of environmental phenomena and security through an intelligent, automated design. It allows for adding more monitoring nodes and uses wired communication that can be upgraded to wireless. The system is intended to monitor places like gas stations and research labs that require full-time surveillance of their environment and security.
Contaminación ambiental
Este documento define la contaminación ambiental como la presencia de agentes físicos, químicos o biológicos en el ambiente que pueden ser dañinos para la salud humana, animal o vegetal. Explica los tipos de contaminación como del agua, suelo y aire, así como las causas principales como desechos industriales y domésticos. Finalmente, detalla algunos efectos de la contaminación como el cambio climático, destrucción de la capa de ozono y pérdida del equilibrio ecológico.
Viewers also liked (19)
A current controller design for current source inverter fed ac machine drive ...
A current controller design for current source inverter fed ac machine drive ...
Idees emploi : synthèse des travaux sur l'emploi des seniors
Idees emploi : synthèse des travaux sur l'emploi des seniors
A generalized flow based method for analysis of implicit relationships on wik...
A generalized flow based method for analysis of implicit relationships on wik...
A high performance spwm controller for three-phase ups systems operating unde...
A high performance spwm controller for three-phase ups systems operating unde...
A proxy based approach to continuous location-based spatial queries in mobile...
A proxy based approach to continuous location-based spatial queries in mobile...
A new dc anti islanding technique of electrolytic capacitor-less photovoltaic...
A new dc anti islanding technique of electrolytic capacitor-less photovoltaic...
Harga headlamp yamaha m-slaz thailand xabre pertamax7.com
Harga headlamp yamaha m-slaz thailand xabre pertamax7.com
A low cost web based remote monitoring system with built in security feature ...
A low cost web based remote monitoring system with built in security feature ...
Similar to 2014 ieee project plc based title
New ppt seminor.pptx
This document presents on automating a metro system using PLC and SCADA. It introduces PLCs as industrial computers that monitor inputs and control outputs based on a custom program. SCADA is described as a control system architecture that uses computers and networking to interface with machinery. The presentation discusses using PLCs and SCADA to automate metro operations like tracking train location to avoid collisions, and reducing speed at sensors. Automating with PLCs and SCADA could prevent accidents and save lives while enhancing security and reducing human errors on the metro system.
L010237985
The document describes a system that uses a PIC16F877A microcontroller to control the speed of a DC motor. The microcontroller is programmed using Flow Code to implement a closed-loop feedback control system. The microcontroller receives feedback on the motor's actual speed and compares it to the desired speed, making adjustments to maintain the motor at the target speed even with changes in load. An LCD display is used to show the motor's current speed. The system was able to control the motor's speed to within 500-600 rpm as desired. Programming the microcontroller with Flow Code made implementation easier compared to other programming methods.
Ieee Vlsi Titles
This document lists 94 titles of papers published in the IEEE Transactions on VLSI Systems in 2015. The papers cover a range of topics related to embedded systems and VLSI design including SAR ADCs, digital front-ends for ECG acquisition, placement-based nonlinearity reduction in DACs, carry select adders, hybrid adders, LTE synchronization, oscillators, encryption processors, networks-on-chip, error detection/correction techniques, and thermal management in multicore systems.
Speed Control of Induction Motor Using PLC and SCADA System
This document discusses a speed control system for an induction motor using a programmable logic controller (PLC) and supervisory control and data acquisition (SCADA) system. The system uses a Siemens PLC and Micro Master 440 variable frequency drive to control the speed of a three-phase induction motor based on feedback from an incremental rotary encoder. The encoder measures motor speed, which is fed back to the PLC for closed-loop control. Motor parameters are monitored via a SCADA system for remote monitoring and control. The system aims to precisely control motor speed at low cost using available PLC and SCADA technologies.
Speed Control of Induction Motor Using PLC and SCADA System
Automation or automatic control is the use of various control systems for operating equipment such as
machinery, processes in factories, boilers and heat-treating ovens, switching in telephone networks, steering and
stabilization of ships, aircraft and other applications with minimal or reduced human intervention. Some
processes have been completely automated. The motor speed is controlled via the driver as an open loop control.
To make a more precise closed loop control of motor speed we will use a tachometer to measure the speed and
feed it back to the PLC, which compares to the desired value and take a control action, then the signal is
transferred to the motor – via driver – to increase / decrease the speed. We will measure the speed of the motor
using an incremental rotary encoder by adjusting parameters (PLC, driver) and also we need to reduce the
overall cost of the system. Our control system will be held using the available Siemens PLC. In addition, we will
monitor motor parameters via SCADA system.
Analysis of Induction Motor Speed Control Using SCADA Based Drive Operated Sy...
This document analyzes induction motor speed control using a variable frequency drive (VFD) system operated by a programmable logic controller (PLC) and supervisory control and data acquisition (SCADA) system. It describes how a VFD can be used to efficiently control the speed of a three-phase induction motor and provide energy savings compared to direct connection to the main supply. A PLC is used to control the VFD based on inputs from proximity sensors on a conveyor belt. A SCADA system allows for remote monitoring and control of the motor speed through the PLC and VFD from a computer interface. The system provides flexible and efficient control of induction motor speed for applications requiring variable speed operation like conveyor belts
Introduction of Programmable Logic Controller to Electric Overhead Travelling...
Abstract: In this paper, we are using PLC programmes to control the crane movement. The application of PLC could simplify circuits and make the design easier, safer and more reliable. Earlier in Industry, relays and contactors are adopted to control the crane motion in desired directions. Starting of the cranes and speed control of the crane is realized through convectional starters and resistance series. This kind of design has low reliability, complex operation, high electrical failure rate, power waste and low efficiency .These problems can be rectified by using programmable logic controller.
Electrical and electronics engineering projects list
This document lists 97 electrical engineering projects ranging from remote monitoring and control systems using technologies like GSM, Zigbee, and RF to energy metering systems, motor speed controllers, irrigation control systems, and more. Many projects involve integrating microcontrollers with technologies like touchscreens, sensors, and wireless communication to monitor and control electrical devices and systems. Common applications include monitoring transformers, meters, motors, temperature, and automating functions like irrigation and lighting control.
Batch 05.pptx
The document describes a closed loop speed control scheme for a BLDC motor using a Zeta converter. It aims to design a controller that allows the motor to rotate at a desired speed and direction. The proposed system uses a Zeta converter for DC bus voltage control and internal inverter control, eliminating the need for external components. It also enables closed loop speed control using a PI controller for error minimization between actual and desired speeds. The system was simulated in MATLAB Simulink and a hardware prototype was developed and tested demonstrating speed control capability.
2013 14-embedded-project-titles-pantech-me-m tech-project-titles
The document lists 82 topics related to embedded system design. The topics are organized under different fields including RTOS, PSoC, CAN, TCPIP, Power Consumption, Wireless Technologies, Robotics, and Bio-Medical/Image Processing. Each topic provides a brief description of a research project related to embedded systems and the listed field.
2013 14-embedded-project-titles-pantech-me-m tech-project-titles
We at Pantech ProEd provide assistance in academic projects based on IEEE standard journals and transactions. Our services cater to all the domains belonging to Circuit branches and Information and Communication engineering branches.
Our methodology of execution and delivery is state - of -art, in essence a professionally designed, intensively tested, work flow model is applied.
Our Project support services caters to the following courses,
1) B.E / B.Tech (EEE/ECE/CSE/IT)
2) M.E (Power Systems)
3) M.E (Power Electronics & Drives)
4) M.E (High Voltage Engineering)
5) M.E (Electrical Drives & Embedded Control)
6) M.E (Control & Instrumentation Engineering)
7) M.E (Embedded System Technologies)
8) M.E (Applied Electronics)
9) M.E (Communication Systems)
10) M.E (VLSI Design)
11) M.E (Medical Electronics)
12) M.E (CSE)
13) M.E (Software Engineering)
14) M.E (Multimedia Technology)
15) M.Tech (Information Technology)
16) M.C.A
17) M.E (Systems Engineering and Operations Research)
18) M.E (Communication and Networking)
19) M.E (Avionics)
20) M.E. (Mobile Pervasive and Computing)
21) M.E. (Network Engineering)
22) M.E (Computer & Communication)
Power electronics embedded power system titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, wireless remote monitoring systems using Zigbee, online control of robots using fuzzy logic and virtual instrumentation, image processing techniques like optical flow estimation and structural texture similarity, and hardware designs like an FFT processor for MIMO-OFDM systems and self-repairing digital systems inspired by endocrine cellular communication.
Et0117 power electronics embedded power system vlsi l abview titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, wireless remote monitoring systems using Zigbee, online control of robots using fuzzy logic and LabVIEW, image processing techniques like optical flow estimation and structural texture similarity, and hardware designs like an FFT processor for MIMO systems and a self-repairing digital system inspired by endocrine cellular communication.
Power electronics embedded power system titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, wireless remote monitoring systems using Zigbee, online control of robots using fuzzy logic and virtual instrumentation, image processing techniques like optical flow estimation and structural texture similarity, and hardware designs like an FFT processor for MIMO-OFDM systems and self-repairing digital systems inspired by endocrine cellular communication.
Power electronics embedded power system titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, wireless remote monitoring systems using Zigbee, online control of robots using fuzzy logic and virtual instrumentation, image processing techniques like optical flow estimation and structural texture similarity, and hardware designs like an FFT processor for MIMO-OFDM systems and self-repairing digital systems inspired by endocrine cellular communication.
Power electronics embedded power system titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, mobile assisted living systems, water quality monitoring using GSM, speed and torque monitoring of induction motors, oxygen level monitoring, defect detection of printed circuit boards, hardware-based job queue management for many-core architectures, and FFT processors for MIMO-OFDM systems.
Power electronics embedded power system titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, mobile assisted living systems, water quality monitoring using GSM, speed and torque monitoring of induction motors, oxygen level monitoring, defect detection of printed circuit boards, hardware-based job queue management for many-core architectures, and FFT processors for MIMO-OFDM systems.
Design and Construction of DC Motor Speed Controller Using Android.ppt
Rapid progress in microelectronics and microcontrollers in recent years has made it possible to apply modern control technology to control efficient and reliable operation of many applications such as the engine, anti-lock braking system (ABS), cruise, steering, and vehicle traction. Many of these operations including DC motor and therefore there is a need for implementing effective control strategies with digital control of these motors. The speed of DC motor is directly proportional to armature voltage and inversely proportional to field flux and adjustable speed drives can be operated over a wide range by controlling armature or field excitation. Development of various solid state switching devices such as diode, transistor and thyristor along with various analog/digital chips used in firing/controlling circuits, have made dc drives more handy for control in numerous areas of applications. For DC motor speed control, closed-loop PWM technique is widely used and well known . In this technique, the regulation of motor’s speed is realized by changing the voltage of motor which is adjusted by the duty ratio of PWM. In order to improve the performance of motor’s speed regulation and to reduce the steady-state error of the rotational speed of motor, a high- performance microcontroller can be used.In this work, an arduino microcontroller is used for implementation.
Power electronics embedded power system vlsi l abview titles
The document discusses several topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI circuits. Specifically, it provides summaries of recent projects related to voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, and improved DC-DC converters. It also lists project ideas involving power quality improvement, reactive power compensation, and automatic load shedding schemes. Additional sections outline embedded system projects involving wireless monitoring, water quality monitoring, and motor control. Application areas for LabVIEW include online control of robots and remote experimentation. Image processing projects involve tasks like video object extraction, tracking, and defect detection. The final section lists recent
SCADA PPT-21.08.2016 (Revised)
1. Madhya Pradesh Power Transmission Company Ltd. awarded a turnkey contract in September 2013 to establish a state-of-the-art transmission SCADA system to improve operational efficiency.
2. The project included establishing 3 control centers to monitor over 300 substations across the state, implementing the system for 2 years, and providing maintenance and support for 5 additional years.
3. Benefits of the SCADA system include automatic monitoring and reporting, improved control and operation of substations, reduced transmission losses and improved power supply quality.
Similar to 2014 ieee project plc based title (20)
Speed Control of Induction Motor Using PLC and SCADA System
Speed Control of Induction Motor Using PLC and SCADA System
Speed Control of Induction Motor Using PLC and SCADA System
Speed Control of Induction Motor Using PLC and SCADA System
Analysis of Induction Motor Speed Control Using SCADA Based Drive Operated Sy...
Analysis of Induction Motor Speed Control Using SCADA Based Drive Operated Sy...
Introduction of Programmable Logic Controller to Electric Overhead Travelling...
Introduction of Programmable Logic Controller to Electric Overhead Travelling...
Electrical and electronics engineering projects list
Electrical and electronics engineering projects list
2013 14-embedded-project-titles-pantech-me-m tech-project-titles
2013 14-embedded-project-titles-pantech-me-m tech-project-titles
2013 14-embedded-project-titles-pantech-me-m tech-project-titles
2013 14-embedded-project-titles-pantech-me-m tech-project-titles
Et0117 power electronics embedded power system vlsi l abview titles
Et0117 power electronics embedded power system vlsi l abview titles
Design and Construction of DC Motor Speed Controller Using Android.ppt
Design and Construction of DC Motor Speed Controller Using Android.ppt
Power electronics embedded power system vlsi l abview titles
Power electronics embedded power system vlsi l abview titles
2014 ieee project plc based title
- 1. PLC BASED TITLE 2013-14 1. On the Implementation of Industrial Automation Systems Based on PLC 2. Performance of HTTP Protocol in Networked Control Systems 3. Small-Signal Modeling of Active-Clamped ZVS Current-Fed Full-Bridge Isolated DC/DC Converter and Control System Implementation Using PSoC 4. Remote Control Laboratory Using EJS Applets and Twin CAT Programmable Logic Controllers 5. Bayesian-Network-Based Reliability Analysis of PLC Systems 6. Performance of HTTP Protocol in Networked Control Systems 7. Automata-Based Railway Signaling and Interlocking System Design [Testing Ourselves] 8. Predictive Consumption Models for Electro pneumatic Production Systems 9. Preemptive Arc Fault Detection Techniques in Switchgear and Control gear 10. Development of PLC-Based Software for Increasing the Dependability of Production Automation Systems 11. Automatic Generation of the Supervisor Code for Industrial Switched-Mode Systems 12. A Switching Control Strategy for the Reduction of Torque Ripple for PMSM 13. PMSM sliding mode FPGA-based control for torque ripple reduction 14. Precision Control of Modular Robot Manipulators: The VDC Approach with Embedded FPGA 15. A Programmable Controller IC for DC/DC Converter and Power Factor Correction Applications 16. FPGA Implementation of Sliding-Mode-Control Algorithm for Scaled Bilateral Tele-operation