This document provides technical specifications for Meba miniature circuit breakers. It lists specifications for pole configuration, rated voltage, current, frequency, breaking capacity, energy limiting class, tripping characteristics, standards compliance, dimensions, and operation principles. The breakers are suitable for protection in AC circuits up to 415V and 50Hz and comply with IEC standards. Dimensions and diagrams of 1, 2, 3 and 4 pole configurations are provided.
350kV 8000KVA series resonant cable test systemJohnny Chan
This document provides the technical specifications for an AC resonant test system for testing cables up to 220kV. The system has a rated power of 8,000 kVA at 350 kV and can test large cable reels up to 600 meters long. It includes components such as an LV switchgear, voltage regulator, exciter transformer, HV reactor, and HV filter to form a resonant test loop that meets standards for voltage withstand and partial discharge testing of high voltage cables.
This document provides specifications for Sharp's PC814X series AC input photocouplers.
It includes key details such as:
1. The PC814X series features 4-pin DIP and SMT packages, with AC input and high isolation voltage up to 5kV.
2. Electrical characteristics are specified, including typical current transfer ratio of 20% at ±1mA input, collector-emitter saturation voltage of 0.1V max, and response times under 20us.
3. Maximum ratings and model line-up are listed, along with manufacturing guidelines for reflow soldering with temperature profile shown.
The document discusses electrical measurement safety and standards. It aims to raise awareness of hazards, understand safety specifications, and minimize risks. Key points covered include:
1. Common electrical measurement hazards and how to avoid them through safety inspections of meters and test leads.
2. International safety standards IEC 61010 which defines overvoltage categories and improved protection against transients.
3. Choosing meters rated for the correct overvoltage category, such as CAT III for distribution-level circuits, to withstand higher transient voltages.
This document provides information about electrical test equipment from Seaward Group, including:
- Low voltage and high voltage test tools for electrical installations from distribution cables to plug sockets.
- Multi-function and single-function installation testers, high voltage indicators, proving units, and accessories.
- Details on specific products like the PowerTest 1557 multi-function installation tester, IRT 1557 insulation and continuity tester, ERT 1557 earth resistance tester, and PowerCheck 1557 verification unit.
- Seaward offers over 70 years of experience in electrical test instrumentation and provides a complete testing and measurement solution with service, calibration, and support.
Catalog Kansai ALN AMP SL series, Beeteco.com
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
The portable VLF Test System 20 kV of Seba KMT can be used to test the cables in conjunction with the according local regulations for operating voltage levels up to 11 kV for new cables and 16 kV for aged cables at 3 μF cable capacity.
By using the patented Seba KMT 0.1 Hz Cosine Square Wave Voltage, weak and for further operation critical spots in PE, XLPE but also in paper cables are brought to a controlled breakdown very fast without causing additional damage or ageing to the cable insulation.
The SEBA KMT VLF Test System consists of a DC source, which charges the test object up to the required test voltage level and the commutator unit, which performs the regular 5 second interval polarity change.
350kV 8000KVA series resonant cable test systemJohnny Chan
This document provides the technical specifications for an AC resonant test system for testing cables up to 220kV. The system has a rated power of 8,000 kVA at 350 kV and can test large cable reels up to 600 meters long. It includes components such as an LV switchgear, voltage regulator, exciter transformer, HV reactor, and HV filter to form a resonant test loop that meets standards for voltage withstand and partial discharge testing of high voltage cables.
This document provides specifications for Sharp's PC814X series AC input photocouplers.
It includes key details such as:
1. The PC814X series features 4-pin DIP and SMT packages, with AC input and high isolation voltage up to 5kV.
2. Electrical characteristics are specified, including typical current transfer ratio of 20% at ±1mA input, collector-emitter saturation voltage of 0.1V max, and response times under 20us.
3. Maximum ratings and model line-up are listed, along with manufacturing guidelines for reflow soldering with temperature profile shown.
The document discusses electrical measurement safety and standards. It aims to raise awareness of hazards, understand safety specifications, and minimize risks. Key points covered include:
1. Common electrical measurement hazards and how to avoid them through safety inspections of meters and test leads.
2. International safety standards IEC 61010 which defines overvoltage categories and improved protection against transients.
3. Choosing meters rated for the correct overvoltage category, such as CAT III for distribution-level circuits, to withstand higher transient voltages.
This document provides information about electrical test equipment from Seaward Group, including:
- Low voltage and high voltage test tools for electrical installations from distribution cables to plug sockets.
- Multi-function and single-function installation testers, high voltage indicators, proving units, and accessories.
- Details on specific products like the PowerTest 1557 multi-function installation tester, IRT 1557 insulation and continuity tester, ERT 1557 earth resistance tester, and PowerCheck 1557 verification unit.
- Seaward offers over 70 years of experience in electrical test instrumentation and provides a complete testing and measurement solution with service, calibration, and support.
Catalog Kansai ALN AMP SL series, Beeteco.com
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
The portable VLF Test System 20 kV of Seba KMT can be used to test the cables in conjunction with the according local regulations for operating voltage levels up to 11 kV for new cables and 16 kV for aged cables at 3 μF cable capacity.
By using the patented Seba KMT 0.1 Hz Cosine Square Wave Voltage, weak and for further operation critical spots in PE, XLPE but also in paper cables are brought to a controlled breakdown very fast without causing additional damage or ageing to the cable insulation.
The SEBA KMT VLF Test System consists of a DC source, which charges the test object up to the required test voltage level and the commutator unit, which performs the regular 5 second interval polarity change.
This document describes low ohm battery shunt resistors of the HEB series. It provides details on:
- Open frame electron beam welded construction available from 6W to 50W and resistances from R00005 to R001
- Applications for current sensing in vehicles and equipment
- Electrical and environmental characteristics including temperature range of -40°C to +170°C and tolerance of ±1%
- Dimensional drawings and specifications for different part numbers
This document summarizes specifications for low ohm battery shunt resistors of the HEB series. It describes the open frame electron beam welded construction, power ratings from 6W to 50W, and resistance values from R00005 to R001. Key features include power dissipation up to 15W, current loads up to 350A, high pulse power ratings, and tinned or untinned terminal options. Electrical characteristics, packaging, ordering information, and derating curves are provided.
This document discusses advances in ceramic capacitor technology that are enabling next generation technologies. It describes how Class 1 and Class 2 ceramic capacitor designs are improving, focusing on multilayer ceramic capacitors (MLCC). Key trends like 48V automotive systems, efficient data center power conversion, high temperature downhole applications, and wide bandgap semiconductors are driving the need for capacitors with capabilities like higher voltages, tighter tolerances, smaller sizes, higher temperatures, and lower losses. The document examines how KEMET is developing new ceramic capacitor products and technologies to address these trends.
The XD010-42S-D4F 10W power module passed all reliability qualification testing including high temperature operational life testing at 175°C for 1000 hours with 15 devices and high temperature storage testing at 100°C for 1000 hours with 10 devices. Testing was also performed on the XeMOS II 0.8um fabrication process used to manufacture the device. The device is qualified for reliable operation.
This document discusses KEMET's T540 and T541 polymer capacitor series. It announces new features for these COTS products, including improved humidity capability up to 85°C and 85% relative humidity. It also describes new case size extensions and KEMET's lifetime estimation model for these capacitor solutions. The document provides information on product specifications, applications such as in military and aerospace equipment, and questions from attendees.
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
Surge wave generators (SWG) are used with reflectometers for cable fault location. They generate surges that create arcs at faults, allowing transient waves to be recorded and fault distances to be determined. SWGs are available for voltages up to 3500kV and energies up to 3500J. They use switchable capacitors and surge stages to optimize energy for prelocation and pinpointing faults. A Digiphone receiver uses the difference in arrival time between electromagnetic and acoustic signals to precisely locate faults.
Technical specification for 3.ph 4 wire stw 12 02-11laxman prasad
The document provides a technical specification for a 3-phase, 4-wire solid state whole current lag only energy meter with an LCD display. Key details include:
- It is to be used for balanced/unbalanced loads in shallow tube well pump sets with an accuracy class of 1.0 and a current rating of 10-60 amps.
- The meter must comply with various Indian and international standards for electricity meters.
- It must be able to operate under tropical climatic conditions with high temperatures, humidity, and rainfall.
- Electrical specifications include a class 1.0 accuracy, 240V supply voltage, 50Hz frequency, and power factor range of zero lag to unity to zero lead.
This document describes low ohm battery shunt resistors of the HEB series. It provides specifications for open frame electron beam welded punched out resistors ranging from 6W to 50W and resistance values from R00005 to R001. Details include physical configuration, applications in current sensing, electrical/environmental characteristics, packaging, ordering information, and typical performance curves.
This document provides specifications for the SAR07030 series of ultra-high current SMT power inductors. It includes dimensions, electrical ratings, ordering information, test data, reliability test requirements, and packaging details for the inductors. The inductors feature shielded construction, frequencies up to 3MHz, low DCR/uH, high saturation current, and flame retardant encapsulation. Inductance ranges from 0.15uH to 33uH with currents from 52A to 2.5A.
The Bond Rite Clamp is the only Static Grounding Clamp that provides Operators with a VISUAL Reference that potentially charged equipment is connected to a verified static grounding point.
The document provides information on LV Capacitor CLMD, including:
1) The CLMD capacitor consists of wound elements with a metallized polypropylene film dielectric and sequential disconnector to reliably disconnect failed elements. Each element is vacuum treated, placed in a plastic case, and encapsulated in resin.
2) The document provides specifications for the CLMD capacitor such as voltage range, frequency, terminals, protection class, losses, tolerances, and testing levels.
3) Dimension diagrams and specifications are given for the CLMD13, 33S, 43, 53, 63, and 83 capacitor models.
Uniohm resistors datasheet for car -anti-sulfurized thick film chip resistors...Felix Law
This Uniohm resistors datasheet for car 1%-5%, anti-sulfurized thick film chip resistors, ns02~ns12 series. Allchips is the authorized distributor of Uniohm.
UNIOHM recommend the storage condition temperature: 15℃~35℃, humidity :25%~75%.
(Put condition for individual product).
Even under UNIOHM recommended storage condition, solderability of products over 1 year old.
(Put condition for each product) may be degraded.
Store / transport cartons in the correct direction, which is indicated on a carton as a symbol.
Otherwise bent leads may occur due to excessive stress applied when dropping of a carton.
Product performance and soldered connections may deteriorate if the products are stored in the following places:
a. Storage in high Electrostatic.
b. Storage in direct sunshine、rain and snow or condensation.
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
MCCB Fuji - Molded Case Circuit Breakers Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
Catalog thiết bị đóng cắt Fuji Electric - 06 - MCCB & ACB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Fuji thiet bi dien-cataloguemccbfuji-160413042900Dien Ha The
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji, Catalog,
Catalog Thiết Bị Điện Fuji, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp Fuji, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-cataloguemccbfuji-160413042900 dienhathe.orgDien Ha The
This document provides an overview and specifications for Fuji Electric's molded case circuit breakers (MCCBs). It includes:
1) An introduction to Fuji Electric's G-TWIN MCCB series, which conforms to international standards and offers compact, high-performance breakers.
2) A catalog of MCCB products organized by type, including line protection, motor protection, UL489 listed, and distribution breaker models. Specifications like current ratings and breaking capacities are provided.
3) Sections with additional technical details on MCCBs like type number nomenclature, mounting modifications, terminal connections, wire sizes, dimensions, and characteristic curves.
4) Contact information for Fuji Electric
This document describes low ohm battery shunt resistors of the HEB series. It provides details on:
- Open frame electron beam welded construction available from 6W to 50W and resistances from R00005 to R001
- Applications for current sensing in vehicles and equipment
- Electrical and environmental characteristics including temperature range of -40°C to +170°C and tolerance of ±1%
- Dimensional drawings and specifications for different part numbers
This document summarizes specifications for low ohm battery shunt resistors of the HEB series. It describes the open frame electron beam welded construction, power ratings from 6W to 50W, and resistance values from R00005 to R001. Key features include power dissipation up to 15W, current loads up to 350A, high pulse power ratings, and tinned or untinned terminal options. Electrical characteristics, packaging, ordering information, and derating curves are provided.
This document discusses advances in ceramic capacitor technology that are enabling next generation technologies. It describes how Class 1 and Class 2 ceramic capacitor designs are improving, focusing on multilayer ceramic capacitors (MLCC). Key trends like 48V automotive systems, efficient data center power conversion, high temperature downhole applications, and wide bandgap semiconductors are driving the need for capacitors with capabilities like higher voltages, tighter tolerances, smaller sizes, higher temperatures, and lower losses. The document examines how KEMET is developing new ceramic capacitor products and technologies to address these trends.
The XD010-42S-D4F 10W power module passed all reliability qualification testing including high temperature operational life testing at 175°C for 1000 hours with 15 devices and high temperature storage testing at 100°C for 1000 hours with 10 devices. Testing was also performed on the XeMOS II 0.8um fabrication process used to manufacture the device. The device is qualified for reliable operation.
This document discusses KEMET's T540 and T541 polymer capacitor series. It announces new features for these COTS products, including improved humidity capability up to 85°C and 85% relative humidity. It also describes new case size extensions and KEMET's lifetime estimation model for these capacitor solutions. The document provides information on product specifications, applications such as in military and aerospace equipment, and questions from attendees.
The document provides information on HTR's HIA series of silicone coated wire wound resistors. Key details include:
- Resistors range from 0.5W to 20W and have tolerances as close as 0.25%. Resistance values range from R01 to 120K.
- Ceramic cores provide high thermal conductivity. Housings have flame retardant thermocoat and all welded caps and leads.
- Non-inductive winding and pulse capability versions are available. Resistors can withstand temperatures up to 275°C.
Surge wave generators (SWG) are used with reflectometers for cable fault location. They generate surges that create arcs at faults, allowing transient waves to be recorded and fault distances to be determined. SWGs are available for voltages up to 3500kV and energies up to 3500J. They use switchable capacitors and surge stages to optimize energy for prelocation and pinpointing faults. A Digiphone receiver uses the difference in arrival time between electromagnetic and acoustic signals to precisely locate faults.
Technical specification for 3.ph 4 wire stw 12 02-11laxman prasad
The document provides a technical specification for a 3-phase, 4-wire solid state whole current lag only energy meter with an LCD display. Key details include:
- It is to be used for balanced/unbalanced loads in shallow tube well pump sets with an accuracy class of 1.0 and a current rating of 10-60 amps.
- The meter must comply with various Indian and international standards for electricity meters.
- It must be able to operate under tropical climatic conditions with high temperatures, humidity, and rainfall.
- Electrical specifications include a class 1.0 accuracy, 240V supply voltage, 50Hz frequency, and power factor range of zero lag to unity to zero lead.
This document describes low ohm battery shunt resistors of the HEB series. It provides specifications for open frame electron beam welded punched out resistors ranging from 6W to 50W and resistance values from R00005 to R001. Details include physical configuration, applications in current sensing, electrical/environmental characteristics, packaging, ordering information, and typical performance curves.
This document provides specifications for the SAR07030 series of ultra-high current SMT power inductors. It includes dimensions, electrical ratings, ordering information, test data, reliability test requirements, and packaging details for the inductors. The inductors feature shielded construction, frequencies up to 3MHz, low DCR/uH, high saturation current, and flame retardant encapsulation. Inductance ranges from 0.15uH to 33uH with currents from 52A to 2.5A.
The Bond Rite Clamp is the only Static Grounding Clamp that provides Operators with a VISUAL Reference that potentially charged equipment is connected to a verified static grounding point.
The document provides information on LV Capacitor CLMD, including:
1) The CLMD capacitor consists of wound elements with a metallized polypropylene film dielectric and sequential disconnector to reliably disconnect failed elements. Each element is vacuum treated, placed in a plastic case, and encapsulated in resin.
2) The document provides specifications for the CLMD capacitor such as voltage range, frequency, terminals, protection class, losses, tolerances, and testing levels.
3) Dimension diagrams and specifications are given for the CLMD13, 33S, 43, 53, 63, and 83 capacitor models.
Uniohm resistors datasheet for car -anti-sulfurized thick film chip resistors...Felix Law
This Uniohm resistors datasheet for car 1%-5%, anti-sulfurized thick film chip resistors, ns02~ns12 series. Allchips is the authorized distributor of Uniohm.
UNIOHM recommend the storage condition temperature: 15℃~35℃, humidity :25%~75%.
(Put condition for individual product).
Even under UNIOHM recommended storage condition, solderability of products over 1 year old.
(Put condition for each product) may be degraded.
Store / transport cartons in the correct direction, which is indicated on a carton as a symbol.
Otherwise bent leads may occur due to excessive stress applied when dropping of a carton.
Product performance and soldered connections may deteriorate if the products are stored in the following places:
a. Storage in high Electrostatic.
b. Storage in direct sunshine、rain and snow or condensation.
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
MCCB Fuji - Molded Case Circuit Breakers Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
Catalog thiết bị đóng cắt Fuji Electric - 06 - MCCB & ACB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Fuji thiet bi dien-cataloguemccbfuji-160413042900Dien Ha The
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji, Catalog,
Catalog Thiết Bị Điện Fuji, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp Fuji, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-cataloguemccbfuji-160413042900 dienhathe.orgDien Ha The
This document provides an overview and specifications for Fuji Electric's molded case circuit breakers (MCCBs). It includes:
1) An introduction to Fuji Electric's G-TWIN MCCB series, which conforms to international standards and offers compact, high-performance breakers.
2) A catalog of MCCB products organized by type, including line protection, motor protection, UL489 listed, and distribution breaker models. Specifications like current ratings and breaking capacities are provided.
3) Sections with additional technical details on MCCBs like type number nomenclature, mounting modifications, terminal connections, wire sizes, dimensions, and characteristic curves.
4) Contact information for Fuji Electric
Fuji thiet bi dien-catalogue-mccb-fuji
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-catalogue-mccb-fuji dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Fuji thiet bi dien-cataloguemccbfuji-160413042900Thuan Kieu
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog cs fdp
Catalog CS,
Catalog Thiết Bị Điện CS,
Catalog Điện Công Nghiệp CS,
http://dienhathe.com,
Xem thêm các sản phẩm khác của CS tại https://dienhathe.com
Để nhận báo giá sản phẩm CS vui lòng gọi: 0907.764.966
Catalog cs mcb rccb
Catalog CS,
Catalog Thiết Bị Điện CS,
Catalog Điện Công Nghiệp CS,
http://dienhathe.com,
Xem thêm các sản phẩm khác của CS tại https://dienhathe.com
Để nhận báo giá sản phẩm CS vui lòng gọi: 0907.764.966
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog cs mcb rccb
C&S,
Catalog C&S,
Catalog Thiết Bị Điện C&S,
Catalog Điện Công Nghiệp C&S,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Autonics tại https://dienhathe.com
Để nhận báo giá sản phẩm vui lòng gọi: 0907.764.966
Catalog cs fdp
C&S,
Catalog C&S,
Catalog Thiết Bị Điện C&S,
Catalog Điện Công Nghiệp C&S,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Autonics tại https://dienhathe.com
Để nhận báo giá sản phẩm vui lòng gọi: 0907.764.966
Catalog thiết bị đóng cắt Fuji Electric - 07 - ELCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog MCCB & ACB Fuji Electric dòng G-TWIN Mới Nhất 2019CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến Quý khách hàng Catalog MCCB & ACB Fuji Electric Mới Nhất (2019) gồm
MCCB (Molded case circuit breakers ) dòng G-TWIN
ACB (Air circuit breakers) dòng DH
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
This document provides information on miniature circuit breakers and residual current devices, including:
- Miniature circuit breakers of types BKP, BKN, and BKH with ratings from 1A to 125A and characteristics curves of B, C, and D.
- Residual current circuit breakers with overcurrent protection of types RKP, RKS, RKS-b, 32KGR, and 32GRh with ratings from 3A to 50A.
- Residual current circuit breakers of types RKN and RKN-b with ratings from 25A to 100A.
- Isolators of type BKD with ratings from 40A to 125A.
It provides specifications
Dienhathe.com miniature circuit breakersDien Ha The
This document provides an overview of Siemens miniature circuit breakers, including their standard, high-capacity, universal current, high current, and power supply company product ranges. It describes the benefits of the circuit breakers, such as their high rated breaking capacity, excellent current limitation, and individually mountable additional components. Technical specifications are provided for the different product lines, including their tripping characteristics, voltages, terminals, and environmental resistance.
Fuji thiet bi dien-elcbfuji-160413044256Thuan Kieu
Fuji thiet bi dien-elcbfuji-160413044256
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-elcbfuji-160413044256 dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
The document provides an overview of Siemens' miniature circuit breaker product range, including standard, high-capacity, universal current, high current, and power supply company product lines. It lists the technical specifications for each product line, including rated currents and voltages, tripping characteristics, terminals, approvals, and more. The benefits of the circuit breakers include high rated breaking capacity, excellent current limitation, different tripping characteristics, safety-compliant terminals, uniform additional components, and fast installation. The circuit breakers are designed to protect electrical equipment from overheating and leakage currents.
This document provides information about Meba's AD22 indicator lamp series. It describes the key features and specifications of various indicator lamp models including voltage ratings, dimensions, colors available, and circuit diagrams. The document aims to introduce customers to Meba's diverse range of high quality indicator lamps that comply with international standards.
AC Contactors come in many forms with varying capacities and features. Unlike a circuit breaker, a contactor is not intended to interrupt a short circuit current. Contactors range from those having a breaking current of several amperes to thousands of amperes and 24 V DC to many kilovolts. The physical size of contactors ranges from a device small enough to pick up with one hand, to large devices approximately a meter (yard) on a side.
A distribution board (also known as panelboard or breaker panel) is a component of an electricity supply system which divides an electrical power feed into subsidiary circuits, while providing a protective fuse or circuit breaker for each circuit in a common enclosure. Normally, a main switch, and in recent boards, one or more residual-current devices (RCD) or residual current breakers with overcurrent protection (RCBO), are also incorporated.
Industrial and multiphase plugs and sockets provide a connection to the electrical mains rated at higher voltages and currents than household plugs and sockets .All from www.meba.net
Rated Current: 6-63A, 1-4Pole, pillar terminal with clamp easy mounting onto 35mm Din rail,thermal or thermal-magnetic operation. , professional circuit breaker manufacture since 1997.(www.meba.net)
MPFIM4, Residual Current Devices for earth leakage detection. It is to be used in association with miniature circuit breakers, its function is to detect earth leakage current and open the connected circuit to protect people and equipment, major used in industrial application. These devices are designed to meet the Earth Leakage Protection Standards of the IEC: IEC/EN 61008.
Meba is an Asian supplier of low voltage electrical components since 1993. They produce the MB-2 series of low-voltage distribution cabinets and the MBXL series of indoor/outdoor low-voltage power distribution boxes. The MB-2 cabinets use a bus bar system and modular components for compact distribution. The MBXL boxes are made of durable materials and use fuse-switch-disconnectors for protection and selective coordination up to 80kA. Both product lines meet international standards and provide high quality, reliable power distribution solutions.
This document provides information about Meba's AD22 indicator lamp series. It describes the key features and specifications of various indicator lamp models including voltage ratings, dimensions, colors available, and circuit diagrams. The document aims to introduce customers to Meba's diverse range of high quality indicator lamps that comply with international standards.
1. 08
Technical parameter:
Pole
Rated Voltage(Un)
Rated Current IN
Rated frequency fN
Rated breaking capacity
Energy limiting class
Tripping characteristic
1, 2, 3, 4
230(240)/400(415)V AC, max.60V DC
0.5-63A
50HZ
6KA
3
B,C,D
B
EN 50022
18mm/pole
IEC 60898, EN60898
2
1-25mm
Isolating class
Mounting on the rail
Build-in width
Standards
Cross-section of
connecting lead
77=0.8
45
35.6=0.3
44
65.7
5.5
80=0.8
18
Dimensions(mm):
Operation Principle Fig:
1Pole
1
2
2Pole
1
2
3
4
N
N
3Pole
1
2
3
4
5
6
4Pole
1
2
3
4
5
6 8
7 N
N
Technical parameter:
Pole
Rated Voltage(Un)
Rated Current IN
Rated frequency fN
Rated breaking capacity
Energy limiting class
Tripping characteristic
1, 2, 3, 4
230(240)/400(415)V AC, max.60V DC
0.5-63A
50HZ
6KA
3
B,C,D
B
EN 50022
18mm/pole
IEC 60898, EN60898
2
1-25mm
Isolating class
Mounting on the rail
Build-in width
Standards
Cross-section of
connecting lead
77=0.8
45
35.6=0.3
44
65.7
5.5
80=0.8
18
Dimensions(mm):
Operation Principle Fig:
1Pole
1
2
2Pole
1
2
3
4
N
N
3Pole
1
2
3
4
5
6
4Pole
1
2
3
4
5
6 8
7 N
N
OLB7-1P/2P
Miniature Circuit Breaker
OLB7-3P
Miniature Circuit Breaker
www.meba.net
Miniature
Circuit Breaker
OLB7-3POLB7-1P/2P
2. BH Miniature Circuit Breaker
Features and Applications:
BH seriesminiature circuit breakeris characteristicof smallsize,
light weight,novel structure and excellent performance. They
are mounted in the illuminating distribution board and used in
guest house s, block of flats, high buildings, squar es, airports,
railway stations, plants and enterprises etc. inACcircuits 240V
(single pole) up to 415V(3 pole) 50Hz for protection of overload
short circuit and forcircuit change-over in lighting sys tem. Breaking
capacity is 3KA. The items comply with IEC60898 standard.
Technical parameter:
Number of Poles
Rated Current (A)
Rated Voltage(V)
Breaking Capacity(A)
Electrical Life(Times)
Mechanical Life(Times)
1P,2P,3P
6, 10, 15, 20, 25, 30, 40, 50, 63, 70,80, 90, 100
110/220 (1P), 240/415 (2P), 415(3P)
3000
6000
16000
Dimension(mm):
75
50
25
95
3P
2P
1P
77
64
100
BH-P Miniature Circuit Breaker
Applications:
BH-P series miniature circuit breaker applies to industrial,
commerical, lighting and electric machine distrib ution system
with AC415V, 50/60Hz, ratedworking currentup to100Ato protect
against overload and short circuit.The itemis installed intoplug-in
type mounting base.
Technical parameter:
Number of Poles
Rated Current (A)
Rated Voltage(V)
Breaking Capacity(A)
Electrical Life(Times)
Mechanical Life(Times)
1P,2P,3P
6, 10, 15, 20, 25, 30, 40, 50, 63, 70,80, 90, 100
110/220 (1P), 240/415 (2P), 415(3P)
3000
6000
16000
Dimension(mm):
25
20.7
30
ON
SOFAB
57.4
75
89
77
64.2
61
75
57.4
www.meba.net
Miniature
Circuit Breaker
BH
09
BH-P
3. www.mebamfg.com
Miniature
Circuit Breaker
MBGLD4/MBGLD4A Miniature Circuit Breaker
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBGLD4/ MBGLD4A
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( Type C ), 3 to 5 times rated current ( Type B ), 10 to 14 times rated current ( TypeD )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000awarded bythecompetentcertification body, Mebais qualifiedinthemanufacturing ofthe object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is sure that withstand anyadverse conditions duringtransport and handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
A
Vac
Hz
kA
2
mm
A
93% RH at 25 50% RH at 40
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
-5 a 40
IP20
1/2/3/4
25
4000
8000
B/C/D
Type B: 3 a 5 In Type C: 5 a10 In Type D: 10 a 14 In
attach
10
MBGLD4AMBGLD4
4. MBBH Miniature Circuit Breaker
Applications:
MBBH series miniature circuit breaker, major export to South America, Middle East market, has light weight, smallsize, novel structure
and excellent performance. They are mounted in the metal distribution boar d and used in guesthouses. block of fiats, high buildings,
squares, airpo rts, railway stations, plants and enterprises etc, in AC circuits 240V(single pole) up to 415V(3poie) 50Hz for protectionof
overload short circuitand for circuitchangeover in lightingsystem. Breaking capacityis 3KA.The items complywith BS&NEMASTANDARD.
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century, Year, Month and Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBBH
IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
NEMA Type
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10 times
rated current (Type C), 10 to 14 times rated current ( Type D)
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectively dissipates the electric arcthat is generatedby the openingcontacts of thetrigger
mechanism in the presence of an overload or short circuit.
CE
ISO 9001-2000 awardedby the competent certification body, Meba is qualifiedin the manufacturingof the object
IEC 60947 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving thecircuit breakers (breakers),customers may performthe tests maybe necessary toensure
compliance with the technical specifications.
The packaging is sure that withstand any adverse conditions during transport and handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
93% RH at 25
10 a 60
6/10/15/20/30/40/50/60
120/240/415
50/60
3
-5 a +40
IP20
1, 2, 3, 4
25
4000
6000
B/C/D
Type B 3 a 5 In Type C 5 a 10 In Type D 10 a 14 In
attach
www.meba.net
Miniature
Circuit Breaker
11
MBBH
5. MABD Miniature Circuit Breaker
Specification needs:
Manufacturer: Meba Electric Enterprises
Country of Origin: china
Brand: meba
Model: MABD
IEC 60898 IEC60947-2
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230 V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
NEMA TYPE
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to
10 times rated current (Type C).
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of
the trigger mechanism in the presence of an overload or short circuit.
Semko CB
ISO9001-2000, awardedby the competentcertification body, Mebais qualifiedin the manufacturingof the object
IEC 60898 standards awarded by an international certifying body.
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receivingthe circuit breakers (breakers), customers may perform the tests may be necessary
to ensure compliance with the technical specifications.
The packaging is sure that withstand any adverse conditions during transport and handling to the
warehouse of cutomers.
In one of its sides the breaker is marked with the symbol permanent ink, year, month and batch.
Attach catalogs indicating the technical specifications
Submit sample of the product offered
2 YEARS
CNF & FOB
25 DAYS
A
Vac
Hz
kA
93% RH at 25
10 a 60
6110/6/20/25/32/40/50/63
120/240/415
50/60
6
40
IP20
1/2/3/4
25
4000
8000
B/C/D
5 a 10 In
attach
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month and Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
2
mm
A
www.meba.net
Miniature
Circuit Breaker
12
MABD
6. Applications:
GV series motor protection circuit breaker are mainly used for the overload and short circuit protection of motors in AC50/60Hz, up to
660V, 0.1-80A power circuit, as a full-voltage starter to start and cut off the motors, under the AC3 load or for the overload and short circuit
protection of the circuitand power equipment in the power in the power distribution network.
Technical parameter:
Standard power ratings of 3-phase motors
50/60Hz in category AC-3
Type Setting range
0.1-0.16
0.16-0.25
0.25-0.4
0.4-0.63
0.63-1
1-1.6
1.6-2.5
2.5-4
4-6
6-10
10-16
16-20
20-25
0.1-0.16
0.16-0.25
0.25-0.4
0.4-0.63
0.63-1
1-1.6
1.6-2.5
2.5-4
4-6.3
6-10
9-14
13-18
17-23
20-25
24-32
660V
KW
--
--
--
0.37
0.55
1.1
1.5
3
4
7.5
11
15
18.5
--
--
--
0.37
0.55
1.1
1.5
3
4
7.5
9
11
15
18.5
26
500V
KW
--
--
--
--
0.37
0.75
1.1
2.2
3.7
5.5
10
11
15
--
--
--
--
0.37
0.75
1.1
2.2
3.7
5.5
7.5
9
11
15
18.5
440V
KW
--
--
--
--
0.37
0.55
1.1
1.5
3
4
7.5
9
11
--
--
--
--
0.37
0.55
1.1
1.5
3
4
7.5
9
11
11
15
415V
KW
--
--
--
--
--
--
1.1
1.5
2.2
4
7.5
9
11
--
--
--
--
--
--
0.75
1.5
2.2
4
5.5
9
11
11
15
380V
KW
--
--
--
--
--
0.37
0.75
1.5
2.2
4
7.5
10
11
--
--
--
--
--
0.37
0.75
1.5
2.2
4
5.5
7.5
11
11
15
220V
KW
--
--
--
--
--
--
0.37
0.75
1.1
2.2
4
5.5
5.5
--
--
--
--
--
--
0.37
0.75
1.1
2.2
3
4
5.5
5.5
7.5
GV1-M01
GV1-M02
GV1-M03
GV1-M04
GV1-M05
GV1-M06
GV1-M07
GV1-M08
GV1-M10
GV1-M14
GV1-M20
GV1-M21
GV1-M22
GV2-M01/RS01
GV2-M02/RS02
GV2-M03/RS03
GV2-M04/RS04
GV2-M05/RS05
GV2-M06/RS06
GV2-M07/RS07
GV2-M08/RS08
GV2-M10/RS10
GV2-M14/RS14
GV2-M16/RS16
GV2-M20/RS20
GV2-M21/RS21
GV2-M22/RS22
GV2-M32/RS32
www.meba.net
Miniature
Circuit Breaker
GV2-M10/GV2ME Miniature Circuit Breaker
13
GV2-M10 GV2ME
7. 18
79
36
45
45
Features and Applications:
Dimension(mm):
C45D Indicator
Din Rail type LED Indicator, Neon Signal Lamp
The DIN Rail type Modular Signal Lamp is applicable to circuit
with rated voltage 230V AC, 50/60Hz for visual indication and
signaling.
Low service duration, minimum power consumption
Compact design in modular size, easy installation
Rated voltage: 230V AC, 50/60Hz
Colour: Red, green, yellow
Connection terminal: Pillar terminal with clamp
2
Connection capacity: Rigid conductor 10mm
Installation: - On symmetrical DIN rail
- Panel mounting
Illumination type:
A. Illumination: LED
- Max power: 0.6W
- Service duration: 30, 000 hours
B. Illumination: Neon bulb
- Max power: 1.2W
- Service duration: 15, 000 hours
CPKZM0-1.0 Miniature Circuit Breaker
CPKZ M0 Motor Protective Circuit Breaker isapplicable for the
circuit of AC50/60Hz, rated insulation voltage 750V, rated
operating voltage up to 660V, rated operating current from
0.1A to 25A. Itis used forprotecting the motoragainst overlo ad,
short-circuit and phase-failure. It can bealso used forstarting
and breaking the starter of motor and for the circuit protection
in the circuit of 25A.
Motor Protective Circuit Breakers (CPKZM)
Features and Applications:
Screw or DIN rail mounting
Thermal and electromagnetic trip
Rated operational current up to 25A
Switching capacity 150/50KA/415V
Short-circuit release, fixed setting to 14X Iu
Single-phasing sensitive
With screws or spring loaded terminals
Comply with IEC/EN6094
Technical parameter:
Standard
power ratings
of 3-phase
motors 50/60Hz
in category
AC-3(kW)
Setting range
of overload
tripping
current Ir(A)
Norminal
breaking
capacity(A)
Rated
operating
current 400V
Ie(A)
Reference
-
0.06
0.09
0.12
0.25
0.55
0.75
1.5
2.2
3
4
5.5
7.5
9
12.5
0.1-0.16
0.16-0.25
0.25-0.4
0.4-0.63
0.63-1
1-1.6
1.6-2.5
2.5-4
4-6.3
6.3-10
6.3-10
10-16
10-16
16-20
20-25
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
0.16
0.25
0.4
0.63
1
1.6
2.5
4
6.3
6.6
10
16
16
20
25
CPKZM0-01
CPKZM0-02
CPKZM0-03
CPKZM0-04
CPKZM0-05
CPKZM0-06
CPKZM0-07
CPKZM0-08
CPKZM0-10
CPKZM0-14
CPKZM0-16
CPKZM0-20
CPKZM0-21
CPKZM0-22
CPKZM0-32E
www.meba.net
Miniature
Circuit Breaker
14
C45DCPKZM0-1.0
8. C45N Miniature Circuit Breaker
Features and Applications:
C45N series miniature circuit breaker isused in lightingdistribution
system or motor distribution system for protection overload and
short-circuit in the system. The product is neoteric in structure,
light in weight, reliable and excellent in performance. It has high
breaking capacity, can trip quickly, and its case and items are
adoptedby highfire-resistant and shockproofplastics. The product,
with long life, is mainly used in AC 50Hz/60Hz single-pole 230V
or two, three,four pole 400Vcircuit for overloadand short-circuit
protection as well as forunfrequent on-and-off switching electric
equipment and lighting circuit innormal case. The products comply
with IEC 60898.
Technical parameter:
Number of Poles
Rated Current (A)
Breaking Capacity (A)
Rated Voltage (V)
Rated Frequency
Endurance
Circumstance Temperature
Electrical Life
Mechanical Life
1P,1P+N, 2P, 3P, 3P+N, 4P
1, 2, 3, 4, 6, 10, 16, 20, 25, 32,40, (50, 63)
6000, (4500)
230/400
50/60Hz
4000
-5+40
no less than 6000 operations
(O-C) no less than 20000 operations
Characteristic Curve:
10000
5000
1H
2000
1000
500
200
100
50
20
10
5
2
1
0.5
0.2
0.1
0.05
0.02
0.01
0.005
0.002
0.001
0.5 1 2 3 4 5 7 10 20 30 5 0 70 100 200 I /1K
t(s)
B type 3-5In
C type 5-10In
D type 10-14In
short circuit prospective short-circuit
current peak value
prospective
short-circuit energy
Current-limiting peak value
Current-limiting
short-circuit energy times
0 2ms 10ms
Dimension(mm):
4P
3P
2P
1P
72
54
36
18
70
40
77
45
35 27
75
L
www.meba.net
Miniature
Circuit Breaker
15
C45N
9. AEG E90 E91 E92 E93 S90 S91 S92 S93 Miniature circuit
breaker (MCB)
NEW AEG E90 E91 E92 MCB
Rated Current: 6-63A
Quality guarantee: 5 years
CE CB certificated
Applications:
The productis mainly used inAC50/60Hz single pole230V or two,
three, four pole400Vvoltage for overload and short-circuitprotection
as well asfor unfrequenton-and-off switching electric equipment
and lighting circuitunder nrmal conditionl, the productis suitabl e
for industry, business, building, ressidenc e, etc. It's conformity
with GB10963, IEC60898 standards.
C47-3P Miniature Circuit Breaker
Characteristic Curve:
10000
5000
1H
2000
1000
500
200
100
50
20
10
5
2
1
0.5
0.2
0.1
0.05
0.02
0.01
0.005
0.002
0.001
0.5 1 2 3 4 5 7 10 20 30 50 70 100 200 I/1K
t(s)
B type 3-5In
C type 5-10In
D type 10-14In
Technical parameter:
Rated current: 1, 2, 3, 4, 6, 10, 16, 20, 25, 32, 40, 50, 63A
Tripping characteristics: B(3-5)In, C(5-10)In, D(10-15)In
No. of pole: 1P, 2P, 3P, 4P
Breaking capacity: 4.5KA, 6KA
Standard
Number of poles
Rated current(In)
Rated voltage(Un)
Rated frequency
Tripping curve
Release action characteristics
Magnetic releases operate
Rated breaking capacit(Lcn)
Endurance
Circumstance temperature
Electrical life
Mechanical life
Tropical ration
Protection degree
IEC60898
1P,2P,3P,4P
6, 10, 16, 20, 25, 32, 40, 50, 63
AC240/415V
50/60Hz
B, C, D
1.13In>1h Non-trip
1.45In<1h trip
2.55In 1s-60S trip
5In>0.1s Non-trip
10In<0.1s trip
B curve:between 3 and 5In
C curve:between 5 and 10In
D curve:between 10 and 15In
3000A
>2500
-5 to +40
>6000times
20000 times
Treatmen 2(RH95%, at 55)
IP20
Time delay
Instantaneous(Curve C)
Miniature
Circuit Breaker
www.meba.net
16
C47-3P
10. 35 27
75
L
10000
5000
0.5 1 2 34 5 7 10 20 30 50 70 100 200 I/1K
B 3-5In type
C 5-10In type
D 10-14In type
2000
1000
500
200
100
50
20
10
5
2
1
0.5
0.2
0.1
0.05
0.02
0.01
0.005
0.002
0.001
Characteristic Curve:
18 0.9 36 1.25 54 1.5
72 1.5 49.5 1.25
73 1.5
81
35.51.25
45.51.25
Standard
IEC898
IEC847-2
Rated current (A)
1, 2, 3, 4, 5, 6, 10, 16, 20, 25, 32, 40, 50, 63A
1, 2, 3, 4, 5, 6, 10, 16, 20, 25, 32, 40, 50, 63A
Character Voltage (V)
230/240
380/415
130
230/240
400/415
230/240
400/415
Pole
1
2, 3, 4
1
Breaking Capacity (A)
6000
6000
20000
10000
3000
20000
10000
2, 3, 4
B
C
D
Features and Applications:
C65N Miniature Circuit Breaker
The products of C65N belong to the advanced level of nineties in
the international instead of the older generation of C45N. They
have protective function as shortage and overload, and are used
in lighting distributionsystem in industry, commerce and dwelling,
and protecting fractional electrical motors. And they also have
many merits of high protective grade (up to IP20), high breaking
capacity, reliable sensitive action, convenient , multipole
assembling long lifeetc. They are mainly adapted to the circuit of
AC 50Hz, 230V in single pole, 400V in double, three, four poles
for protecting overloadand shortcircuit. Meanwhile, theyare also
used in turningon or off the electrical apparatus and lighting circuit
under the normal conditions.
Technical parameter:
Dimension(mm):
www.meba.net
Miniature
Circuit Breaker
17
C65N
11. XYDB7-3P Miniature Circuit Breaker
Features and Applications:
XYDB7 have protective function as shortage as overload, and used in lighting distribution system, industry, commerce, and protect
fractional electric motors. And they also have many merits of high protective grade (upto IP20), high break capacity, reliable sensitive
action, convenient, multipol e assembling, long life etc. They are mainly adapted to the circuit of AC 50Hz,230V in single pole,400V in
double, three, fourpoles for protectingoverload and shortcircuit. Meanwhile, theyare also usedin turning on oroff the electric apparatus
and lighting circuit under the normal condition.
Technical parameter:
Electrical specification
Conforms to standard of electrical
EN60898 (IEC898 GB10963-99)
230V/400V; 50/60Hz
10KA IEC898 (0.5 63A)
15KA IEC947-2 (0.5 63A)
Max.48V (KL7..., 10KA) single pole
Max.250v (Kl7-DC, 6KA) single pole
C,D charaectisistic curve
100AgL ( 10KA)
3
-5 to + 40
P40 (Under mounting)
No less than 8000 times
No less than 20000 times
45mm
80mm
17.5mm per pole (single pole)
35mm: 1P+N (two pole)
Used for track of 35mm of IEC standard
Two-function terminal can connect with busbar and conducting wire
2
Wire 1-25mm
Conducting wire 0.8-2mm
Terminal block capacity
Enclosure width
The length of exposed plane
Enclosure height
Life: Electrical Mechnical
Perfermance
Max.fuse that can be connected to
Selective grade
Working ambient temperature
Enclosed protective class
Short circuit breaking capacity of DC
Rated current (Ue)
Mounting manner
Terminal manner
Miniature
Circuit Breaker
www.meba.net
18
XYDB7-3P
12. Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Operation Indicator Window
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB1-63
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230 V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve C
Characteristic Intervention
FOR RIEL DIN 35 mm
The circuit breaker have an operating window colordisplay that shows the state inwhich it is ( connected
or disconnected ).
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( TypeC ), 3 to 5 times rated current ( Type B), 10 to 14 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of
the trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000awarded bythe competentcert ifica tion body, Mebais qualifi ed in the manufacturing of the object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary
to ensure compliance with the technical specifications.
The packaging is sure that withstand any adverse conditions during transport and handling to the
warehouse of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
93% RH at 25
10 a 60
6/10/16/20/25/32/40/50/63
240/415
50/60
6
40
IP20
1/2/3/4
25
4000
10000
B/C/D
5 a 10 In
attach
MB1-63 Miniature Circuit Breaker
www.meba.net
Miniature
Circuit Breaker
19
MB1-63
14. Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Operation Indicator Window
A
Vac
Hz
kA
2
mm
A
93% RH at 25
10 a 60
6/10/16/20/25/32/40/50/63
240/415
50/60
10
40
IP20
1 1+N 2 3 3+N 4
25
4000
8000
B/C/D
Type B 3 a 5 In Type C 5 a 10 In Type D 10 a 14 In
attach
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB7
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230 V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
The circuit breaker have an operating window color display that shows the state in which it is ( connected
or disconnected ).
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following range s: 5 to 10
times rated current ( TypeC ), 3 to 5 times rated current ( Type B), 10 to 14 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000 awarded by thecompetent certification body, Mebais qualified in themanufacturing of theobject
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is surethat withstandany adverse conditions duringtransportand handling to thewarehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
MB7 Miniature Circuit Breaker
www.meba.net
Miniature
Circuit Breaker
21
MB7
16. MB040 Time Relay
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB040
IEC 60898
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( TypeC ).
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
ISO 9001-2000
IEC 60898 standards
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by us to ensure that the life of the goods offered by atleast 5 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
We are surethe packaging withstandany adverse conditionsduring transp ort and handling to the cellar s
of the Company. Carton or Pallet
In one of its sides the breaker is marked with the symbol permanent ink, year, month and batch.
Available
Submit sample of the product offered
2 YEARS
CIF CNF FOB
25 Days
93% RH at 25
10 a 60
6/16/20/25/32
120/240/415
50/60
3/4.5/6
40
IP20
1
25
4000
8000
C
5 a 10 In
attach
www.meba.net
Miniature
Circuit Breaker
23
MB040
17. MB043 Isolator
Specification needs:
Electrical Properties
Type of Assembly
Present Certificates
Testing For Acceptance
Packing
Dial Century, Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB043 Isolator
IEC 60947-3
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
ISO 9001-2000
IEC 60947-3 standards
Life, given by us to ensure that the life of the goods offered by atleast 5 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
We are surethe packaging withstandany adverse conditions during transport and handling to the cellars
of the Company. Carton or Pallet
In one of its sides the breaker is marked with the symbol permanent ink, year, month and batch.
Available
Submit sample of the product offered
2 YEARS
CIF CNF FOB
25 Days
93% RH at 25
10 a 60
6/16/20/25/32
120/240/415
50/60
0
40
IP20
1/2/3/4
25
4000
8000
/
/
attach
Miniature
Circuit Breaker
www.meba.net
24
MB043
18. MB32 DPN
Applications:
MB32 series is mainly for protecton of circuits with AC220V and 50Hz/60Hz, and for unfrequent conversion under normal conditions as
well. Its action can be up to two pole with its only one pole volume and be used as a leakage breaker by assembling with leakage. It is
produced perEN60.898,IEC947-2 standards.
Over-current tripping characteristic:
Tripping
Tripping rated
current(InA)
Beginning state Test current Norminative Time Test result Note
C
Cold state
Heat state
Cold state
Cold state
Cole state
1.13In
1.45In
2.55In
5In
10In
t 1h
t 1h
1s t 60s
t 0.1h
t 0.1s
No tripping
Tripping
Tripping
No tripping
Tripping
Close auxillzry switch
making the circuit
40
The current will rise to
norminative value in 5s
Main Technical Data:
Rated current A
6 10 16
20 25 32 40
Pole NO
1P+N
Rated
voltage(V)
240/415
Breaking
capacity(KA)
4.5
Instantaneous
Tripping type
C
Instantaneous
Protection current range
5In I 10In
Electric life
5000
Dimension(mm):
44.5
77
18
80
36
45
www.meba.net
Miniature
Circuit Breaker
25
MB32
19. Specification needs:
MB32 DPN
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB32
IEC 60898 IEC947-2
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230 V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( TypeC ).
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE
ISO9001-2000 awardedby thecompetentcertification body,Mebais qualifiedin themanufacturing of the object
IEC 60898 standards in the manufacture of the goods awarded by an international certifying body.
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customer may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is sure that withstand any adverse conditionsduring transport andhandling to thewarehouse
of customer
In one of its sides the breaker should be marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specifications
Submit sample of the product offered
2 YEARS
FOB CIF
25 Days
93% RH at 25
10 a 60
6/10/16/20/25/32/40
240/415
50/60
4.5
40
IP20
1P+N
25
5000
10000
C
5 a 10 In
attach
Miniature
Circuit Breaker
www.meba.net
26
MB32
20. www.meba.net
Specification needs:
Miniature
Circuit Breaker
MBL10 Miniature Circuit Breaker
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Operation Indicator Window
93% RH at 25
10 a 60
6/10/16/20/25/32/40/50/63
240/415
50/60
6
40
IP20
1/2/3/4
25
4000
10000
B/C/D
5 a 10 In
attach
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBL10
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve C
Characteristic Intervention
FOR RIEL DIN 35mm
The circuit breaker have an operating window color display that shows the state in which it is (connected
or disconnected).
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current (Type C), 3 to 5 times rated current ( TypeB ), 10 to 14 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO 9001-2000awarded by thecompetent certification body, Meba isqualified in themanufactu ring of the object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging issure thatwithstandany adverse conditions during transportand handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
27
MBL10
21. MBL11 Miniature Circuit Breaker
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Operation Indicator Window
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBL11
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve C
Characteristic Intervention
FOR RIEL DIN 35mm
The circuit breaker have an operating window color display that shows the state in which it is (connected
or disconnected).
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current (Type C), 3 to 5 times rated current ( TypeB ), 10 to 14 times rated current ( TypeD )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000 awardedby the competentcertifica tion body, Mebais qualified inthe manufacturing of the object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging issure that withstandany adverse condition s during transport and handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
93% RH at 25
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
-5 a 40
IP20
1/2/3/4
25
6000
20000
B/C/D
5 a 10 In
attach
www.meba.net
Miniature
Circuit Breaker
28
MBL11
22. Applications:
Protection and control of circuit against overlo ad and short circ uit,
in building installation-suchas houses, office s, commercial complex,
motorsystem (D curve) and industrial installation-for switching,
control, protection and regulation of electrical circuits. Also in
switchgear panels, railway and marine application.
Overall and mounting dimensioned chart:
18
36
54
72
70
50
73
36
81
45
MB47-1P/2P
Miniature Circuit Breaker
18
36
54
72
80
36
50
66
76
45
www.meba.net
Miniature
Circuit Breaker
MBL11 Miniature Circuit Breaker
Overall & Installation Dimensions:
29
MBL11 MB47-1P
23. Miniature
Circuit Breaker
www.meba.net
MB47-1P/2P Miniature Circuit Breaker
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB47-1P/ 2P
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( TypeC ), 3 to 5 times rated current ( Type B), 10 to 14 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000awarded by thecompetent certification body, Meba is qualifiedinthemanufacturing of theobject
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is sure that withstand any adverse conditions during transport and handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
93% RH at 25 50% RH at 40
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
40
IP20
1/2/3/4
25
4000
8000
B/C/D
Type B: 3 a 5 In Type C: 5 a 10 In Type D: 10 a 14 In
attach
30
MB47-2PMB47-1P
24. www.meba.net
Miniature
Circuit Breaker
MB48/MB49 Miniature Circuit Breaker
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB48/ MB49
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( TypeC ), 3 to 5 times rated current ( Type B), 10 to 20 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO 9001-2000awarded by the competent certification body, Mebais qualified in themanufactu ring of theobject
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is sure that withstand any adverse conditio ns during transport and handling tothe warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
A
Vac
Hz
kA
2
mm
A
93% RH at 25
10 a 60
6/10/16/20/25/32/40/50/63
240/415
50/60
6
40
IP20
1/2/3/4
25
4000
10000
B/C/D
5 a 10 In
attach
31
MB48 MB49
25. Miniature
Circuit Breaker
www.meba.net
MB50/MB51 Miniature Circuit Breaker
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Tropicalization
2
mm
A
Manufacturing Standards
A
Vac
Hz
kA
93% RH at 25
10 a 60
6/10/16/20/25/32/40/50/63
240/415
50/60
6
40
IP20
1/2/3/4
25
4000
10000
B/C/D
5 a 10 In
attach
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB50/ MB51
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( TypeC ), 3 to 5 times rated current ( Type B), 10 to 20 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO 9001-2000 awarded by the competent certification body,Meba isqualified in the manufacturing of the obj ect
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is sure that withstand any adverse conditions during transport and handling to thewarehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
32
MB51MB50
26. www.meba.net
Miniature
Circuit Breaker
Specification needs:
MB52 Isolator
Electrical Properties
Type of Assembly
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB52 Isolator
IEC 60947-3
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
The breaker have an operating window color display that shows the state in which it is ( connected or
disconnected ).
CE
ISO 9001-2000
IEC 60947-3 standards
Life, given by us to ensure that the life of the goods offered by atleast 5 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
We are surethe packaging withstand any adverse conditions during transport and handling to the cellars
of the Company. Carton or Pallet
In one of its sides the breaker is marked with the symbol permanent ink, year, month and batch.
available
Submit sample of the product offered
2 YEARS
CIF CNF FOB
25 Days
93% RH at 25
10 a 60
6/16/20/25/32/40/50/63
240/415
50/60
0
40
IP20
1/2/3/4
25
4000
8000
/
/
attach
Operation Indicator Window
33
MB52
27. Miniature
Circuit Breaker
www.meba.net
MB52 Miniature Circuit Breaker
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB52 MCB
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
The circuit breaker have an operating window color display that shows the state in which it is ( connected
or disconnected ).
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( TypeC ), 3 to 5 times rated current ( Type B), 10 to 20 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO 9001-2000awarded by the competent certificat ion body, Mebais qualified in themanufacturing of the object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging issure that withstand any adverse conditions during trans port and handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
A
Vac
Hz
kA
2
mm
A
93% RH at 25
10 a 60
6/10/16/20/25/32/40/50/63
240/415
50/60
6
40
IP20
1/2/3/4
25
4000
10000
B/C/D
5 a 10 In
attach
Operation Indicator Window
34
MB52
29. www.meba.net
Miniature
Circuit Breaker
MBB8-63-1P/2P
Miniature Circuit Breaker
MBB8-63-1P/ 2P mini circuit breaker
Function: overload and short-circuit protection
Poles: 1P, 2P, 3P, 4P
Current rate: 1-63A
The prod uct is mainly used in AC50/60HZ single-pole 230V or
two, three, four-pole 400V circuit for overload and short-circuit
protection as well as for unfrequenton-and-off switching electric
equipment and lightingcircuit under normal condition. The product
is suitable for industry, business, building, residence, etc. It is
conformity with GB10963, IEC60898 standards.
Applications:
Features:
Much higher short circuit breaking capacity.
Dual-connection convenient for both standard busbar and
conductor connection.
Improved safetyof operatorsofferedby specialdesign ofterminals.
Much longer service life thanks to energy storage operating
mechanism.
A variety of modular auxiliaries allows for easy and quick
installation.
Enclosure and functional parts made of advanced plastics with
flame-retardant, heat-resistant and impulse-proofproperti es.
Higher current-limiting capacity ensuring a cost-effective
range of products.
Rated current: 1A, 2A, 3A, 4A, 6A, 10A, 16A, 20A, 25A, 32A,
40A, 50A, 63A.
Tripping characteristics: B(3-5)In; C(5-10)In; D(10-15)In.
No. of pole: 1p, 2p, 3p, 4p.
Breaking capacity (see table1).
Technical parameter:
Rated current
(A)
1~63
Pole
Rated Voltage
(V)
Rated short-circuit
breaking current (A)
1
2,3,4
230, 230/400
400
6000
6000
COS
0.7
0.7
MBB8-63-3P/4P
Miniature Circuit Breaker
MBB8-63-3P/4P mini circuit breaker
Function: overload and short-circuit protection
Poles: 1P, 2P, 3P, 4P
Current rate: 1-63A
The prod uct is mainly used in AC50/60HZ single-pole 230V or
two, three, four-pole 400V circuit for overload and short-circuit
protection as well as for unfrequenton-and-off switching electric
equipment and lightingcircuit under normal condition. The product
is suitable for industry, business, building, residence, etc. It is
conformity with GB10963, IEC60898 standards.
Applications:
Features:
Much higher short circuit breaking capacity.
Dual-connection convenient for both standard busbar and
conductor connection.
Improved safetyof operatorsoffered byspecial designof terminals.
Much longer service life thanks to energy storage operating
mechanism.
A variety of modular auxiliaries allows for easy and quick
installation.
Enclosure and functional parts made of advanced plastics with
flame-retardant, heat-resistant and impulse-proofproperti es.
Higher current-limiting capacity ensuring a cost-effective
range of products.
Rated current: 1A, 2A, 3A, 4A, 6A, 10A, 16A, 20A, 25A, 32A,
40A, 50A, 63A.
Tripping characteristics: B(3-5)In; C(5-10)In; D(10-15)In.
No. of pole: 1p, 2p, 3p, 4p.
Breaking capacity (see table1).
Technical parameter:
Rated current
(A)
1~63
Pole
Rated Voltage
(V)
Rated short-circuit
breaking current (A)
1
2,3,4
230, 230/400
400
6000
6000
COS
0.7
0.7
36
MBB8-63-3P/4PMBB8-63-1P/2P
30. MBB47 Miniature Circuit Breaker
Features and Applications:
The product ismainly used inAC50/60HZ single-pole230Vor two, three, four-poles 400Vcircuitfor overload and short-cir cuit protectio n
as well as for unfrequent on-and-off switching electric equipment and lighting circuit under normal condition. It can be used in lighting
and electric motor distribution system. It is characterized with novel structure, light weight, reli able and excellent performance, high
breaking capacity. It is conformity with GB10963, IEC 60898 standards.
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century, Year, Month and Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBB47
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( TypeC ), 3 to 5 times rated current ( TypeB ), 10 to 14 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO 9001-2000 awardedby the competentcertification body, Mebais qualifiedin themanufacturing of theobject
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is sure that withstand any adverse conditions duringtransport and handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
A
Vac
Hz
kA
2
mm
A
93% RH at 25 50% RH at 40
-5 a 40
1/2/3/4/5/6/10/16/20/25/32/40/50/63
240/415
50/60
6
40
IP20
1/2/3/4
25
4000
8000
B/C/D
Type B: 3 a 5 In Type C: 5 a 10 In Type D: 10 a 14 In
attach
www.meba.net
Miniature
Circuit Breaker
37
MBB47
31. MBB100 Miniature Circuit Breaker
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Operation Indicator Window
A
Vac
Hz
kA
2
mm
A
93% RH at 25
10 a 60
63/80/100
240/415
50/60
10
40
IP20
1,2,3,4
63A/16 80A/25 100A/35
4000
8000
C/D
Type C 5 a 1 0 In Type D 10 a 14 I n
attach
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBB100
IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230 V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
The circuit breaker have an operating window color display that shows the state in which it is (connected
or disconnected ).
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( TypeC ), 10 to 14 times rated current ( Type D)
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000 awardedby the competent certificationbody,Meba isqualifiedinthemanufacturing ofthe object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging issure that withstandany adverse conditions during transportand handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
Miniature
Circuit Breaker
www.meba.net
38
MBB100
32. Dimension(mm):
27
35
7.5
108
81
54
27
67
60
5
81
36
45
44
The over-current protection property:
Ambient
Temperature
40 2
-5~+40
Initial Status Test Current Expected Result Expected Result NOte
Cold position
Cold position
Cold position
Cold position
1.05In(In 63A)
1.05In (In 63A)
1.30In(In 63A)
1.30In (In>63A)
8.00In
12.00In
t 1h
t 2h
t < 1h
t < 2h
t 0.2s
t< 0.2s
Non-release
Non-release
Release
Release
Non-release
Non-release
-
-
-
-
Carried out immedi-ately
after previous test
Current smoothlyrises to
specified value within 5s
MBB100 Miniature Circuit Breaker
NC100H-1P Miniature Circuit Breaker
Features and Applications:
Character: high breaker capacity up to 10KA
40-100A current avaliable
Poles: 1P, 2P, 3P, 4P.
NC100H mini circuit breaker, mcb
NC100H high breakingcapacity circuit breaker is usedfor AC50Hz
or 60Hz, single pole 240V, 2, 3, 4 Poles 415, for protecting the
circuit that overload and short circuit may take place. It can be
used in lighting and electricmotor distribution system.Meanwhile
it is applicableto an unfrequentswitchover the electric apparatus
and lighting circuit under normal condition. Breaking capacity is
up to standard of IEC947-7 10KA.
Technical parameter:
Rated current
(A)
Pole number
(P)
Rated voltage
(V)
Breaking capacity
(A)
40, 50, 63, 80, 100
1
2, 3, 4
130
230/240
400/415
230/240
400/415
440
20000
10000
4000
20000
10000
6000
www.meba.net
Miniature
Circuit Breaker
39
MBB100 NC100H-1P
33. NC100H-2P Miniature Circuit Breaker
Features and Applications:
NC100H high breaking capaci ty circuit breaker is used for AC 50Hz or 60Hz, single pole 240V, 2, 3, 4 Poles 415, for protecting the
circuit that overload and short circuit may take place. It can be used in lighting and electric motor distribution system. Meanwhile it
is applicable to an unfrequent switchover the electric apparatus and lighting circuit under normal condition. Breaking capacity is up
to standard of IEC947-7 10KA.
Character: high breaker capacity up to 10KA
40-100A current avaliable
Poles: 1P, 2P, 3P, 4P.
NC100H mini circuit breaker, mcb
Technical parameter:
Rated current (A) Pole number (P) Rated voltage (V) Breaking capacity (A)
40, 50, 63, 80, 100
1
2, 3, 4
130
230/240
400/415
230/240
400/415
440
20000
10000
4000
20000
10000
6000
NC100H-3P Miniature Circuit Breaker
Features and Applications:
NC100H high breaking capaci ty circuit breaker is used for AC 50Hz or 60Hz, single pole 240V, 2, 3, 4 Poles 415, for protecting the
circuit that overload and short circuit may take place. It can be used in lighting and electric motor distribution system. Meanwhile it
is applicable to an unfrequent switchover the electric apparatus and lighting circuit under normal condition. Breaking capacity is up
to standard of IEC947-7 10KA.
Character: high breaker capacity up to 10KA
40-100A current avaliable
Poles: 1P, 2P, 3P, 4P.
NC100H mini circuit breaker, mcb
Technical parameter:
Rated current (A) Pole number (P) Rated voltage (V) Breaking capacity (A)
40, 50, 63, 80, 100
1
2, 3, 4
130
230/240
400/415
230/240
400/415
440
20000
10000
4000
20000
10000
6000
www.meba.net
Miniature
Circuit Breaker
40
NC100H-3PNC100H-2P
34. Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
A
Vac
Hz
kA
2
mm
A
MBGV4 Miniature Circuit Breaker
www.meba.net
Miniature
Circuit Breaker
93% RH at 25 50% RH at 40
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
-5 a 40
IP20
1/2/3/4
25
4000
8000
B/C/D
Type B: 3 a 5 In Type C: 5 a10 In Type D: 10 a 14 In
attach
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBGV4
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current (Type C), 3 to 5 times rated current ( Type B ), 10 to 14 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000 awardedby thecompetentcertification body,Meba isqualifiedin themanufacturing oftheobject
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is surethat withstandany adverse conditions duringtransport and handlingto thewarehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
41
MBGV4
35. A
Vac
Hz
kA
2
mm
A
MBH6 Miniature Circuit Breaker
Protectio n and control of circuit against overload andshort circuit, inbuilding installation-such ashouses, offices, commerci al complex,
motor system (D curve) and industrial installation-for switching,control,protection and regulationof electrical circuits. Also in switchgear
panels, railway and marine application.
Applications:
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century, Year, Month and Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
93% RH at 25 50% RH at 40
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
-5 a 40
IP20
1/2/3/4
25
4000
8000
B/C/D
Type B: 3 a 5 In Type C: 5 a 10 In Type D: 10 a 14 In
attach
Miniature
Circuit Breaker
www.meba.net
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBH6
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35mm
MAGNETIC COIL:ensures the switching of short-circuit, speaking withinthe following ranges: 5to 10 times
rated current (Type C), 3 to 5 times rated current ( Type B ), 10 to 14 times rated current ( TypeD )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectively dissipates theelectric arc that is generatedby the opening contacts of thetrigger
mechanism in the presence of an overload or short circuit.
CE CB
ISO 9001-2000awarded by thecompetent certification body, Meba isqualified in themanufactu ring of the object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receivingthe circuit breakers (breakers) , customers may perform the tests may be necessary toensure
compliance with the technical specifications.
The packaging issure that withstand any advers e conditions during transport and handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
42
MBH6
36. A
Vac
Hz
kA
2
mm
A
MBHVS-3D Isolator
Specification needs:
Applications:
Capable of switch electric circuit with load
Provide function of isolation
Contact position indication
Used as main switch for household and simiar installation
Electrical Properties
Type of Assembly
Present Certificates
Testing For Acceptance
Packing
DialCentury,Year, Monthand Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBHVS Isolator
IEC 60947-3
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35mm
CE
ISO 9001-2000
IEC 60947-3 standards
Life, given by us to ensure that the life of the goods offered by atleast 5 years.
Before receiving the circuit breakers (breakers ), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
We are surethe packaging withstand any adverse conditions during transport and handling to the cellars
of the Company. Carton or Pallet
In one of its sides the breaker is marked with the symbol permanent ink, year, month and batch.
available
Submit sample of the product offered
2 YEARS
CIF CNF FOB
25 Days
93% RH at 25
-5 a 40
6/16/20/25/32/40/50/63/80/100
240/415
50/60
4.5/6
-5 a 40
IP20
1/2/3/4
25
4000
8000
/
/
attach
www.meba.net
Miniature
Circuit Breaker
43
MBHVS-3D
37. MBHVS Isolator
Specification needs:
A
Vac
Hz
kA
2
mm
A
Electrical Properties
Type of Assembly
Present Certificates
Testing For Acceptance
Packing
DialCentury,Year, Monthand Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
93% RH at 25
-5 a 40
6/16/20/25/32/40/50/63/80/100
240/415
50/60
4.5/6
-5 a 40
IP20
1/2/3/4
25
4000
8000
/
/
attach
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBHVS Isolator
IEC 60947-3
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35mm
CE
ISO 9001-2000
IEC 60947-3 standards
Life, given by us to ensure that the life of the goods offered by atleast 5 years.
Before receiving the circuit breakers (breakers ), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
We are surethe packaging withstand any adverse conditions during transport and handling to the cellars
of the Company. Carton or Pallet
In one of its sides the breaker is marked with the symbol permanent ink, year, month and batch.
available
Submit sample of the product offered
2 YEARS
CIF CNF FOB
25 Days
Miniature
Circuit Breaker
www.meba.net
44
MBHVS Isolator
38. www.meba.net
Applications:
MBHVS Isolator
Capable of switch electric circuit with load
Provide function of isolation
Contact position indication
Used as main switch for household and simiar installation
Overall & Installation Dimensions:
18
36
54
72
MBHVS Miniature Circuit Breaker
Protection and control of circuitagainst overload and short circuit,
in building installation-such as houses, offices, commercial
complex, motor system(D curve) and industrial installation-for
switching, control, protectionand regulation ofelectrical cir cuits.
Also in switchgear panels, railway and marine application.
Applications:
86
36
45
67
Overall & Installation Dimensions:
17
34
51
68
82.5
37
47
66
76
45
Miniature
Circuit Breaker
45
MBHVSMBHVS Isolator
39. www.meba.net
MBHVS Miniature Circuit Breaker
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Product Details
Manufacturing Standards
Tropicalization
A
Vac
Hz
kA
2
mm
A
Miniature
Circuit Breaker
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBHVS
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current (Type C), 3 to 5 times rated current (Type B), 10 to 14 times rated current (Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE
ISO 9001-2000awarded by thecompetent certificati on body, Mebais qualified in the manufacturing ofthe object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is sure that withstand any adverse conditionsduring transport andhandlingto the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
93% RH at 25 50% RH at 40
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
-5 a 40
IP20
1/2/3/4
25
4000
8000
B/C/D
Type B: 3 a 5 In Type C: 5 a10 In Type D: 10 a 14 In
attach
46
MBHVS
40. www.meba.net
Miniature
Circuit Breaker
MB162-1P/3P Isolator Miniature Circuit Breaker
Specification needs:
A
Vac
Hz
kA
2
mm
A
Electrical Properties
Type of Assembly
Present Certificates
Testing For Acceptance
Packing
DialCentury,Year, Monthand Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
93% RH at 25
-5 a 40
63/80/100/125
240/415
50/60
3
-5 a 40
IP20
1/2/3/4
25
4000
8000
/
/
attach
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MB162
IEC 60947-3
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35mm
CE
ISO 9001-2000
IEC 60947-3 standards
Life, given by us to ensure that the life of the goods offered by atleast 5 years.
Before receiving the circuit breakers (breakers), customers may performthe tests may be necessary to
ensure compliance with the technical specifications.
We are surethe packaging withstand any adverse conditions during transport and handling to the cellars
of the Company. Carton or Pallet
In one of its sides the breaker is marked with the symbol permanent ink, year, month and batch.
available
Submit sample of the product offered
2 YEARS
CIF CNF FOB
25 Days
47
MB162-1P MB162-3P
41. MBDR047 Delay Relay
Miniature
Circuit Breaker
www.meba.net
MB162-1P/3P Isolator
Miniature Circuit Breaker
Applications:
MB162 is major used as main switch in distribution box, control
on or off for all branch switch. The product is applicable to circuit
with rated voltage 230/400V AC, 50Hz for power distribution and
motor operation as switching disconnector in both household &
commercial and electric equipments installations. The product,
free of maintenance,is suitable for use bynon-professionals. The
product is switched on when the handle is at upper position.
Overall and mounting dimensioned chart:
86
36
45
66
18
36
54
72
Application:
MBDR047 is one kind of timer relay, used in distribution box with
MCB, Isolator, Surge Arrester together.
Rated voltage(V): 220-415.
Overall & Installation Dimensions:
45.5
35
95
44.5
63.56
18
48
MBDR047MB162-1P/3P
42. MBDPE06 Miniature Circuit Breaker
Specification needs:
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Operation Indicator Window
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBDPE
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230 V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve C
Characteristic Intervention
FOR RIEL DIN 35 mm
The circuit breaker have an operating window color display that shows the state in which it is ( connected
or disconnected ).
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current ( Type C ), 3 to 5 times rated current (Type B ), 10 to 14 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000awarded bythe competentcertification body, Meba is qualified in themanufacturingof theobject
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging is sure that withstandany adverse conditionsduring transport and handling to thewarehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
93% RH at 25
10 a 60
1/2/3/4/6/10/16/20/25/32/40/50/63
240/415
50/60
6
-5 a 40
IP20
1/2/3/4
25
4000
10000
B/C/D
5 a 10 In
attach
A
Vac
Hz
kA
2
mm
A
www.meba.net
Miniature
Circuit Breaker
49
MBDPE06
43. MBJ6 Miniature Circuit Breaker
Applications:
Specification needs:
www.meba.net
Miniature
Circuit Breaker
A
Vac
Hz
kA
2
mm
A
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century, Year, Month and Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
93% RH at 25 50% RH at 40
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
-5 a 40
IP20
1/2/3/4
25
4000
8000
B/C/D
Type B: 3 a 5 In Type C: 5 a 10 In Type D: 10 a 14 In
attach
Protectio n and control of circuit against overload and short circuit, in buildinginstallation-such as houses,offices, commercial complex,
motor system(D curve)and industrial installation-forswitching, control, protectionand regulation ofelectrical circuits.Also in switchgear
panels, railway and marine application.
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBJ6
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10 times
rated current ( Type C), 3 to 5 times rated current ( Type B ), 10 to 14 times rated current ( TypeD )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electricarc that isgenerated by the opening contacts ofthe trigger
mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000 awarded by the competentcertificat ion body, Mebais qualified inthe manufacturingof theobject
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving thecircuit breakers (breakers),customers may performthe tests maybe necessary toensure
compliance with the technical specifications.
The packaging is sure that withstand any adverse conditions during transport and handlingto the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
50
MBJ6
44. Specification needs:
A
Vac
Hz
kA
2
mm
A
Product Details
Manufacturing Standards
Tropicalization
Electrical Properties
Type of Assembly
Operation Indicator Window
Present Certificates
Testing For Acceptance
Packing
Dial Century, Year, Month and Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBL7 Insulator
IEC 60947-3
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
The circuit breaker have an operating window color display that shows the state in which it is (connected or
disconnected).
CE
ISO 9001-2000
IEC 60947-3 standards
Life, given by us to ensure that the life of the goods offered by atleast 5 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
We are surethe packaging withstand any adverse conditions during transport and handling to the cellars of
the Company.Carton or Pallet.
In one of its sides the breaker is marked with the symbol permanent ink, year, month and batch.
Available
Submit sample of the product offered
2 YEARS
CIF CNF FOB
25 Days
93% RH at 25
-5 a 40
6/16/20/25/32/40/50/63/80/100
240/415
50/60
3/4.5
-5 a 40
IP20
1/2/3/4
25
4000
8000
/
/
attach
Applications:
MBL7 Insulator
Capable of switch electric circuit with load
Provide function of isolation.
Contact position indication.
Used as main switch for household and simiar installation.
www.meba.net
Miniature
Circuit Breaker
51
MBL7
45. 5.5
35 45
44
60
76.5
80
17.5
MBL7 DPN
MBL7 Series Miniature Circuit Breaker (hereinaft er referred to
as breaker) is the company's own research and development
of new products, theproducts arereliableand accurate protection
features, high breaking capacity, smallsize, isan ideal replacement
product. Circuit breaker is mainly applied to 50Hz/60HZ , rated
voltage 230V, rated operating current to 40 A similar buildings and
places of powerlines and electrical fac ili tie s, over-current protection
devices, can beused for non-frequent on-off operati on. The circuit
breaker in line with IEC60898: 1995, GBl0963-1999 "category for
household and Currentprotection may place used circuitbreakers"
and other standards.
Applications:
Shape and size of the installation of technology:
Trip Type
Thermal Trip
Magnetic Trip
B
1.13In
1.45In
3In
5In
C
1.13In
1.45In
3In
10In
Trip Time
1h
<1h
0.1s
<0.1s
I1
I2
I3
I4
MBL7 Indicator
Din Rail type LED Indicator, Neon Signal Lamp
Specification:
Low service duration, minimum power consumption
Compact design in modular size, easy installation
Rated voltage: 230V AC, 50/60Hz
Colour: Red, green, yellow
Connection terminal: Pillar terminalwith clamp
2
Connection capacity: Rigid conductor10mm
Installation: - On symmetrical DIN rail
- Panel mounting
Illumination type:
A. Illumination: LED
- Max power: 0.6W
- Service duration: 30,000 hours
B. Illumination: Neon bulb
- Max power: 1.2W
- Service duration: 15,000 hours
The DIN Rail type Modular Signal Lamp is applicable to circuit with
rated voltage 230V AC, 50/60Hz for visual indication and signaling.
Overall & Installation Dimensions:
18 44.6
26.35.5
91
35
45.5
70.5
Miniature
Circuit Breaker
www.meba.net
52
MBL7 DPNMBL7
46. Specification needs:
MBL7 DPN
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Operation Indicator Window
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBL7
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve C
Characteristic Intervention
FOR RIEL DIN 35mm
The circuit breaker have an operating window color display that shows the state in which it is (connected
or disconnected).
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 3 to 10
times rated current ( Type C ), 3 to 5 times rated current (Type B), 10 to 14 times rated current ( Type D)
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE CB
ISO 9001-2000 awarded bythe competent certification body, Meba isqualified in the manufacturing of the object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging issure that withstand any adverse conditions during transport and handling to the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
93% RH at 25
10 a 60
6/10/16/20/25/32/40
240/415
50/60
6
-5 a 40
IP20
1P+N
25
4000
8000
B/C
3 a 10 In
attach
www.meba.net
Miniature
Circuit Breaker
53
MBL7 DPN
47. www.meba.net
Miniature
Circuit Breaker
C characteristic curve
Trip current(X ln)
Trip
time
100
10
1
10
1
0.1
0.01
1 2 3 4 6 8 10 20
C
MBL7 DPN
Structural characteristics:
Small size, limiting the effect of good, high breaking capacity,
with 1P+N double break point, the polarization was Insulation
to isolate, insync and connectedto the premise of breaking, N
always first toconnect, after breakingboth to ensurethe protection
of polar arcbreakingthe abilityto effectively protectand control
lines and electrical equipment safety.
Obvious conta ct with the locationof the stateof the instructions.
-Type terminal block used to enhance, to facil ita te wir ing to
2 2
ensure that the wire 1mm to 16mm reliable connection.
C characteristic curve
Trip current(X ln)
Trip
time
100
10
1
10
1
0.1
0.01
1 2 3 4 6 8 10 20
C
Normal working conditions and installation conditions:
The normal working conditions:
shall not exceed the limit of air temperature, the lower limit of
+40 not below -5 , 24h+35 than average
The location of the altitude than 2000mm.
The location ofthe air relative humidity in the highesttemperature
around 40 when does not exceed 50%, at lower temperatures
can allow higherrelative humidity. The wetmonths mean maximum
relative humidity,and nomore than 90 percent of the average
minimum temperature does not exceed +25 . Andconsidering
the temperature changes in product on the surface of the
condensation.
Pollution level 2.
Installation conditions:
Installation category two, three type.
Breaker using standard guide installation.
Circuit breaker should normally be mounted vertically, the
handle up for access to current location.
Installation should be no significant shock and vibration.
Load capacity:
Load Factor K
Switch number(n) MCB capacity
1.10
1.00
0.90
0.80
0.70
1 2 3 4 5 6 7 8
Load Factor (I/In)
Temperature( )Temperature of
1.50
1.40
1.30
1.20
1.10
1.00
0.90
-30 -20 -10 0 10 20 30 40 50 60
JAB7-40 and DO fuse or short-circuit the performance of NH
1.4 high selectivity of 1.4 KA, No functional
1.On electrical circuits
from overload and short
circuit protection.
2.Especially suitable for
civilian use with a bracket
of the lighting circuit
protection.The centerline
breaking, more secure.
Rated Current (A) In
2
4
6
10
16
20
25
32
40
Model
54
MBL7 DPN
48. MBL7 DPN
Orders should be indicated when the product model, release type, the number of such.
For example: JAB7-40 mini circuit breaker, rated current of 16A, release patterns for the C-type, 100 units, is expressed as
JAB7-40-C16.
Order Information:
JAB7-40 of the rated current
Characteristic curve of C
GL fuse rated current (A)
10 16
<0.5
20
0.7
25
1.1
0.8
35
2.1
1.5
1.4
1.4
1.2
50
3.4
3.1
2.9
2.4
2.0
63
5.0
4.6
4.1
3.4
2.9
2.3
80
6.0
5.5
4.5
3.8
3.0
2.4
100
6
10
13
16
20
25
32
40
Fuse D01, D02, D03 performance:
NH-00 fuse option:
JAB7-40 of the rated current
Characteristic curve of C
GL fuse rated current (A)
6
10
13
16
20
25
32
40
16
<0.5
20
0.5
25
0.8
0.7
35
2.7
1.8
1.6
1.5
1.3
40
4.0
2.3
2.1
1.9
2.0
50
3.1
3.1
2.8
2.3
2.0
63
4.6
4.1
3.9
3.1
2.7
2.1
80
6.0
5.5
5.0
4.2
3.5
2.9
2.4
100 125 160
Overall & Installation Dimensions:
18
36
54
72
80
36
50
66
76
45
MBL8/MBL9 Miniature Circuit Breaker
www.meba.net
Miniature
Circuit Breaker
55
MBL8MBL7 DPN
49. Miniature
Circuit Breaker
www.meba.net
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century,Year, Month andBatch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Operation Indicator Window
A
Vac
Hz
kA
2
mm
A
Manufacturer: Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBL8/ MBL9
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve C
Characteristic Intervention
FOR RIEL DIN 35mm
The circuit breaker have an operating window color display that shows the state in which it is (connected
or disconnected).
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10
times rated current (Type C), 3 to 5 times rated current ( TypeB ), 10 to 14 times rated current ( Type D)
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectivelydissipates the electric arc that is generated by the opening contacts of the
trigger mechanism in the presence of an overload or short circuit.
CE
ISO 9001-2000 awardedby thecompetent certific atio n body, Meba is qualified in the manufact uring of the objec t
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customers may perform the tests may be necessary to
ensure compliance with the technical specifications.
The packaging issure that withstand any adverse conditions during transport and handlingto the warehouse
of customers
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
93% RH at 25
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
-5 a 40
IP20
1/2/3/4
25
6000
20000
B/C/D
5 a 10 In
attach
Specification needs:
MBL8/MBL9 Miniature Circuit Breaker
56
MBL9MBL8
50. www.meba.net
Miniature
Circuit Breaker
MBLPN/MBLPN2 Miniature Circuit Breaker
Application:
Protection and control of circuit against overload and short circuit, in building installation-such as houses, offices, commercial complex,
motor system(D curve) and industrial installation-for switching, control, protection and regulation of electrical circuits. Also in switchgear
panels, railway and marine application.
Applicable to terminal and pin/fork type busbar connection Protection against both overload and short circuit
High short-circuit capacity
Specification needs:
A
Vac
Hz
kA
2
mm
A
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century, Year, Month and Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Manufacturer Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBLPN/ MBLPN2
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230 V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10 times
rated current (Type C), 3 to 5 times rated current ( Type B), 10 to 14 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectively dissipates the electric arc that isgenerated by theopening contacts of thetrigger
mechanism in the presence of an overload or short circuit.
CE CB
ISO 9001-2000awarded by thecompetent certification body, Meba is qualified in the manufacturing ofthe object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving thecircuit breakers (breakers), customers may perform thetests may benecessary to ensure
compliance with the technical specifications.
The packaging issure that withstandany adverse conditions during transpo rt and handling to the warehouse
of customers.
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
93% RH at 25 50% RH at 40
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
40
IP20
1/2/3/4
25
4000
8000
B/C/D
Type B: 3 a 5 In Type C: 5 a 10 In Type D: 10 a 14 In
attach
57
MBLPN MBLPN2
51. Miniature
Circuit Breaker
www.meba.net
Application:
Protection and control of circuit against overload and short circuit, in building installation-such as houses, offices, commercial complex,
motor system(D curve) and industrial installation-for switching, control, protection and regulation of electrical circuits. Also in switchgear
panels, railway and marine application.
Applicable to terminal and pin/fork type busbar connection Protection against both overload and short circuit
High short-circuit capacity
Specification needs:
A
Vac
Hz
kA
2
mm
A
Electrical Properties
Type of Assembly
Features
Present Certificates
Testing For Acceptance
Packing
Dial Century, Year, Month and Batch
Catalog
Shows
Technical Warranty
Place of Delivery
Delivery
Product Details
Manufacturing Standards
Tropicalization
Manufacturer Meba Electric Enterprises
Country of Origin: China
Brand: Meba
Model: MBLSN/ MBLSN2
IEC 60898 IEC60947
Relative Humidity
Room Temperature
Rated at 40
Rated operating voltage at 40
Nominal Frequency
Interrupting Capacity at 230 V
Operating temperature
Degree of Protection
Number of poles
Conductor cross section (minimum allowable)
Minimum number of power moves
Minimum number of mechanical operations
Operation curve
Current Trip Curve
Characteristic Intervention
FOR RIEL DIN 35 mm
MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10 times
rated current (Type C), 3 to 5 times rated current ( Type B), 10 to 14 times rated current ( Type D )
BIMETAL: ensuresthe breaker trip when overloaded.
ARC CHAMBER: effectively dissipates the electric arc that isgenerated by theopening contacts of the trigger
mechanism in the presence of an overload or short circuit.
CE CB
ISO9001-2000awarded by thecompetent certification body, Meba is qualified in the manufacturing ofthe object
IEC 60898 standards in the manufacture of the goods
Curve compliance issued Shot by an accredited laboratory for effect
Life, given by Meba to ensure that the life of the goods offered by atleast 15 years.
Before receiving the circuit breakers (breakers), customersmay performthe tests maybe necessary toensure
compliance with the technical specifications.
The packaging issure that withstandany adverse conditions during transp ort and handling to the warehouse
of customers.
In one of its sides the breaker is marked with permanent ink, year, month and batch.
Attach catalogs indicating the technical specification
Submit sample of the product offered
2 YEARS
FOB & CNF
25 Days
MBLSN/MBLSN2 Miniature Circuit Breaker
93% RH at 25 50% RH at 40
-5 a 40
6/10/16/20/25/32/40/50/63
240/415
50/60
6
40
IP20
1/2/3/4
25
6000
20000
B/C/D
Type B: 3 a 5 In Type C: 5 a 10 In Type D: 10 a 14 In
attach
58
MBLSN2MBLSN
52. www.meba.net
Miniature
Circuit Breaker
Specifications: Technical parameter:
Max. AC Voltage
Max. Interrupting Capacity
Min. Current Rating
Max. Current Rating
Agency Recognition of Approvals
Branch circuit protection
Telecom power distribution
Power conditioning
Automatic control systems
Power supplies
Applications:
Power conversion systems
UPS equipment
Control machines
Generator sets
MBQH1/MBQH2 Miniature Circuit Breaker
Hydraulic-magnetic technology ensures reduced nuisance
tripping with temperature variance
Always hold 100% rated current
Wide range of time delays & operating currents
Current limiting capabilities
Ultra compact 26mm width module
Din (13), (18) only, Mini-rail orDual mountable (13),(19) and(26)
Trip indication with mid trip handle position
Switch disconnector provides circuit isolation
Reset possible immediately after overload
230/400 VAC
10kA rms
10A
1=125A
2, 3,1+N, 3+N=100A
IEC 60947-2
SANS VC8036
SANS 156
Poles
1
2
3
1+N
3+N
Voltage
230VAC
400VAC
400VAC
230VAC
400VAC
KA
10
10
10
10
10
MCB Width(mm)
26 (1 Module)
52 (2 Module)
78 (3 Module)
52 (2 Module)
104 (4 Module)
STD Pack
12
6
4
6
3
Rating(A)
10 15 20 25 30 35 40 45 50 63 70 80 100 125
10 15 20 25 30 35 40 45 50 63 70 80 100
10 15 20 25 30 35 40 45 50 63 70 80 100
10 15 20 25 30 35 40 45 50 63 70 80 100
10 15 20 25 30 35 40 45 50 63 70 80 100
Poles
1
3
Voltage
230VAC
400VAC
KA
10
10
MCB Width(mm)
26 (1 Module)
78 (3 Module)
STD Pack
12
4
Rating(A)
10 15 20 25 30 35 40 45 50 63 70 80 100 125
10 15 20 25 30 35 40 45 50 63 70 80 100
Poles
1
2
3
Voltage
230VAC
400VAC
400VAC
KA
10
10
10
MCB Width(mm)
26 (1 Module)
52 (2 Module)
78 (3 Module)
STD Pack
12
6
4
Rating(A)
63 125
63 100
63 100
QH Range
Standard Circuit Breaker 10KA Curve 2 (Standard) mini and DIN Mounting, 57 MM Escutcheon
Type
QH-1(26)
QH-2(26)
QH-3(26)
QH-N-2(26)
QF-N-4(26)
Standard Circuit Breaker 10KA Curve 1, mini and DIN Mounting, 57 MM Escutcheon
Type
QH-1(26)
QH-3(26)
Standard Circuit Breaker 10KA Curve 1, mini and DIN Mounting, 57 MM Escutcheon
Type
QH-S-1(26)
QH-S-2(26)
QH-S-3(26)
59
MBQH1 MBQH2
53. Specifications:
Hydraulic-magnetic technology ensures reduced nuisance
tripping with temperature variance
Always hold 100% rated current
Wide range of time delays & operating currents
Current limiting capabilities
Ultra compact 13, 18, 19, 26mm width module
Din (13), (18) only,Mini-rail or Dual mountable(13), (19)and (26)
Trip indication with mid trip handle position
Switch disconnector provides circuit isolation
Reset possible immediately after overload
Technical parameter:
Max. AC Voltage
Max. Interrupting Capacity
Min. Current Rating
230/400 VAC
5kA rms
0.5A
1=125A
3=100A
IEC 60947-2
SANS VC8036
SANS 156
Max. Current Rating
Agency Recognition of Approvals
MBQF-D Miniature Circuit Breaker
Branch circuit protection
Telecom power distribution
Power conditioning
Automatic control systems
Power supplies
Applications:
Power conversion systems
UPS equipment
Control machines
Generator sets
QF Range
Special Supply Authority/Industrial Circuit Breaker-5KA
Type
QF-1(13)
QF-3(13)
QF-1(19)
QF-3(19)
QF-1(26)
QF-3(26)
Switch Disconnectors 6KA, mini and DIN Rail Mounting, 45 mm Escutcheon
Type
QF-1(13)-D
QF-3(13)-D
QF-1(18)-D
QF-3(18)-D
QF-1(26)-D
QF-3(26)-D
Poles
1
3
1
3
1
3
Voltage
230VAC
400VAC
230VAC
400VAC
230VAC
400VAC
KA
5
5
5
5
5
5
MCB Width(mm)
13 (1 Module)
39 (3 Module)
19.5 (1 Module)
58.5 (3 Module)
26 (2 Module)
78 (3 Module)
STD Pack
12
4
12
4
12
4
Rating(A)
10 15 20 25
10 15 20 25
10 15 20 25 30 35 40 45 50 63
10 15 20 25 30 35 40 45 50 63
10 15 20 25 32 40 45 50 63 70 80 100 125
10 15 20 25 32 40 45 50 63 70 80 100
Poles
1
3
1
3
1
3
Voltage
230VAC
415VAC
240VAC
415VAC
240VAC
415VAC
KA
6
6
6
6
5
5
MCB Width(mm)
13 (1 Module)
39 (3 Module)
18 (1 Module)
54 (3 Module)
26 (2 Module)
78 (3 Module)
STD Pack
12
4
12
4
12
4
Rating(A)
10 15 20 25
10 15 20 25
10 15 20 25 30 35 40 45 50 63
10 15 20 25 30 35 40 45 50 63
10 15 20 25 32 40 45 50 63 70 80 100 125
10 15 20 25 32 40 45 50 63 70 80 100
www.meba.net
Miniature
Circuit Breaker
60
MBQF-D