4. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Daur Hidup Proyek
3
5. Main Components of Construction Project Management
Scope
Schedule
Budget
Quality
PROJECT
MANAGEMENT
(Oberlender, 2000)
6. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Tepat Waktu
Dokumen-DokumenpadaProyek Konstruksi
Triple Constraints
dalam Proyek
Konstruksi (Ervianto,
2005)
Tepat Biaya
Tepat Mutu
Jadwal, Kurva S
RAB
Spesifikasi Teknis
& Gambar Teknis
Dalam memenuhi tiga constraints dalam proyek konstruksi diperlukan
tools/dokumen
untuk memastikan ketiga constraints bisa terpenuhi sesuai yang diharapkan
Constraints Tools
Health, Safety, Environment SMKK
Baru
6
8. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Designer/Konsultan
Perancang & Kontraktor
Technical Documents
Technical
Specification
Latar Belakang DokumenTeknis
Technical
Drawing
Designer/Konsultan
Perancang
Technical Documents
Technical
Specification
Technical
Drawing
Kontraktor
8
Design - Build
Design – Bid - Build
• Owner’s Project Requirements
• Basic Design
9. Pengertian Kontrak Konstruksi
• Kontrak adalah bentuk perikatan antar dua belah pihak
yang secara sadar dilakukan untuk melakukan suatu
pekerjaan dengan hak dan kewajibannya.
• Kontrak Konstruksi adalah keseluruhan dokumen yang
mengatur hubungan antara pengguna jasa dan penyedia
jasa dalam penyelenggaraan konstruksi
9
10. • A "Contract" is an agreement between two or more parties by which
they commit themselves to fulfil defined obligations.
In this context, it is understood that:
1. Both parties must perform their respective obligations;
2. Should one party fail to perform, that party is said to be in breach of
contract ;
3. However, if a failure of performance was caused:
–Either by an outside influence not anticipated under the Contract
–or by the other contracting party
the non-performing party may be excused for its nonperformance.
Contracting Parties Obligations
11. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Dokumen-Dokumen pada Kontrak Konstruksi
8
Pengguna Jasa Penyedia Jasa
Kontrak
1. Dokumen Perjanjian
2. Dokumen Biaya
3. Dokumen Jaminan
4. Dokumen Jadwal
5. Dokumen Mutu
12. Construction Contract Documents
Bridge between the owner’s conceptual image of a project
and the actual construction of the physical facility
Include:
The construction agreement
Drawings
Bid documents
General conditions:
Augment the construction contract and outline the rules
under which the project will be built
Establish the rights, authority, and obligations of the
contracting parties
Standards: AIA, etc.
Supplementary provisions
Special provisions, or special conditions, are more specific
for the job being constructed
Ex: which materials the owner will provide, etc.
Technical specifications
Notice to proceed
Performance and payment bonds
Addenda
12
13. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Dokumen-Dokumen pada Kontrak Konstruksi
9
Dokumen Keterangan Fungsi Umum
Dokumen Perjanjian
Kontrak, Syarat-Syarat Umum Kontrak (SSUK), Syarat-Syarat
Khusus Kontrak (SSKK), dsb.
Mengatur hubungan hukum antara pengguna jasa dan penyedia jasa
dalam penyelenggaraan pekerjaan konstruksi
Dokumen Biaya
Rencana Anggaran Biaya (RAB), Bill Of Quantity (BoQ), Analisis Harga
Satuan Pekerjaan (AHSP), dsb.
Memastikan biaya proyek konstruksi sesuai rencana
Dokumen Jaminan
Jaminan Penawaran, Jaminan Pelaksanaan, Jaminan Pemeliharaan,
dsb.
Memberi jaminan/kepastian terhadap pelaksanaan suatu aspek dalam
proyek konstruksi
Dokumen Jadwal Gantt Chart, Kurva S. Memastikan jadwal pelaksanaan proyek konstruksi sesuai rencana
Dokumen Mutu
Detailed Engineering Design (DED), Gambar Desain (Gambar Teknis),
Spesifikasi Teknis, Kerangka Acuan Kerja (KAK), dsb.
Memberikan gambaran detail desain dan mutu yang harus dipenuhi
dalam proyek konstruksi
Dokumen HSE SMKK
Memberikan panduan kesehatan dan keselamatan selama proses
konstruksi
15. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
• Spesifikasi merupakan perincian tentang rencana, dan jika dikaitkan dengan
suatu produk maka dapat diartikan sebagai perincian tentang rencana dari
suatu produk (KBBI).
• Specification is a combination of words properly describing the quality of a
product, its method of manufacture, its installation into a project, and, in some
cases, a description of the final result or appearance (Lewis, 1975).
• Spesifikasi teknis dapat didefinisikan sebagai deskripsi tertulis dari sebuah
produk (dalam industri konstruksi berupa bangunan fisik/sipil) atau metoda
secara lengkap sehingga dapat digunakan sebagai acuan oleh penyedia jasa
untuk memenuhi semua keinginan dari pengguna jasa. (Ervianto, 2005).
• A construction specification is a well-structured, detailed description of the
quality, standards, workmanship, materials, and completion of work to be
done which evolves across a project (Swaddle, 2021).
Definisi Spesifikasi Teknis
10
Spesifikasi
teknis??
16. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Fungsi Spesifikasi Teknis
13
Pengguna Jasa Penyedia Jasa
Sebagai pedoman dalam pemenuhan
harapan/keinginan dari pengguna jasa melalui
proses pelaksanaan kegiatan konstruksi di
lokasi pekerjaan, baik dalam aspek bentuk,
dimensi, dan kualitas bangunan sipil yang ingin
dihasilkan.
Sebagai media komunikasi untuk menyatakan
harapan dan keinginan dari pengguna jasa atas
penyedia jasa dalam hal bangunan sipil yang
ingin dihasilkan. Penggunaan spesifikasi teknis
oleh pengguna jasa juga untuk mengestimasi
penawaran dan biaya yang akan dikeluarkan.
17. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Fungsi Spesifikasi Teknis Berdasarkan Tahapan Konstruksi
14
I. PERENCANAAN DAN PERANCANGAN
• Mengidentifikasi kebutuhan sumber daya
• Mengidentifikasi standar kualitas
minimum
• Mengidentifikasi metode konstruksi
II. PROCUREMENT
• Mengestimasi harga dari sebuah proyek
• Pembanding penawaran dalam tender
• Acuan dalam pelaksanaan konstruksi
• Mempermudah kontrol pelaksanaan
konstruksi
• Mempermudah kontrol kualitas konstruksi
III. KONSTRUKSI
• Menjadi acuan dalam pemeriksaan
kualitas hasil konstruksi
• Menjadi panduan dalam penilaian akhir
sebuah proyek
IV. PENGUJIAN DAN INSPEKSI
18. Main Types of Construction Specifications
Each project is unique and will need a different set of specifications and most
likely corresponding packages. However, there are three main types of
construction specifications commonly used on projects:
Prescriptive: Provides details on the types of materials and installations
needed to complete a project. Additionally, prescriptive specifications also
describe how to measure installations to ensure that they were up to project
quality and standards.
Performance: Describes the operational requirements. Fundamentally, the
performance specifications should describe to the contractor what is needed
for the final product and how it should essentially function once completed.
Proprietary: Although not as common as prescriptive and performance,
proprietary specifications are used if only one specific product can be used
for an installation.
19. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Jenis-Jenis Spesifikasi Teknis
23
Performance Specification
Spesifikasi kinerja menjelaskan hasil akhir yang diharapkan dari proyek konstruksi, bisa subjektif
seperti kinerja atau nilai estetika atau objektif seperti standar cuaca untuk desain jendela kedap udara.
Prescriptive Specification
Spesifikasi preskriptif menjelaskan bahan yang diperlukan dan metode pemasangan untuk berbagai
aspek proyek konstruksi; semua produk yang dijelaskan dalam spesifikasi ini harus digunakan agar
proyek memenuhi persyaratan kinerjanya.
Proprietary Specification
Spesifikasi proprietary mirip dengan spesifikasi preskriptif namun ditulis dengan produk tertentu yang
sudah ditentukan; kontraktor harus menggunakan bahan-bahan tersebut saat membangun proyek.
General Specification
Spesifikasi umum banyak digunakan dalam pekerjaan komersial dan perumahan, berisi informasi
produk tanpa menentukan produsen yang harus digunakan.
Detailed Specification
Spesifikasi yang terperinci mencakup hampir semua aspek konstruksi secara rinci, bahkan hingga
jumlah sekrup yang digunakan untuk mengikat bahan.
20. The Important Role of Technical Specifications
• Construction contracts define project attributes such as what, when, how much,
which quality and under which conditions.
• The most important aspects of these documents are usually found in technical
specifications.
• Even if it could be explained what will be produced, it cannot be fully
understood what product will be formed with quality and performance level in a
project, if adequate technical specifications is not attached in sufficient detail
(Ibbs, 1985).
• Due to lack of sufficient effort and diligence during the preparation of these
documents, disputes are often inevitable between employer and contractor.
• These disputes cause many negative situations such as a loss of time, financial
loss, prestige loss, and punishment of stakeholders as a result of judicial
process.
• At the same time, these documents constitute the legal basis of construction
contracts.
21. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
• Almost a third of projects enter dispute (NBS National
Construction Contracts and Law Survey 2013) most commonly
between clients and contractors, and a quarter of those are
linked to poor or missing specifications (Swaddle, 2021).
• Pedoman Konstruksi Pemerintah Inggris, yang mencakup
kebijakan-kebijakan utama untuk bagaimana proyek-proyek
pekerjaan umum diadakan dan dilaksanakan, menekankan
pentingnya spesifikasi untuk mendorong peningkatan
berkelanjutan, mencatat target-target keberlanjutan, dan
mempromosikan inovasi.
Mengapa Spesifikasi Teknis Penting
5
22. Technical Specifications Writing (1)
• In construction works, specifications are accepted as important quality
measurement tools for improving the work processes and all management
functions in terms of administrative and technical aspect.
• For this reason, construction specification writers should state what they aim in
applicable, accessible and controllable way in the specifications.
• Writing of construction specifications requires firstly relative authors to have
deep information and competence regarding work and procedures.
• Expression and declaration of construction specifications should be sensitive
and precise as much as a needle tips of pin.
• Each word should be expressed precisely and specification documents should
not involve uncertain words and expressions.
(Kululanga and Price, 2005)
23. Technical Specifications Writing (2)
• Technical Specification files in the construction sector are prepared for different
structure types under 6 main topics:
- Construction
- Mechanical
- Electrical
- Infrastructure
- Landscape
- Interior architecture
• These files should comprise documents such as construction codes, standards,
production information, and other specifications.
(Turk and Vanier, 1995; Dede, 2003)
24. Technical Specifications – Fundamental Issues (1)
• Issues related to construction techniques:
While preparing the technical specifications, technical qualities of production and
special technical conditions should be determined.
Production information and related construction codes and standards should be
included.
Furthermore, information regarding how inspections are made, effort
determination of compliance of productions on required features and standards
should be included in the specification.
25. Technical Specifications – Fundamental Issues (2)
• Issues related to materials:
Along with the physical, mechanical and chemical features of materials,
explanation should be provided on how would materials be used, and what type of
quality standards will be imposed. Also, issues concerning how the experiments
and inspections related to determination of material features should be stated
within the specification in an explicit and clear manner.
• Issues related to machinery and devices:
All technical and functional features of machinery and devices to be used during
production should be explained in the documents.
Furthermore, information concerning how tests and inspections will be performed
should be included in technical specifications.
26. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Standar dalam Spesifikasi Teknis
20
Bahan
Bangunan
Konstruksi
Peralatan
Konstruksi
Spesifikasi
Metode
Spesifikasi
Proses/
Kegiatan
SNI
(Indonesia),
ISO
(International)
ASTM, ASCE,
ACI (America)
SNI, ASTM,
ASME, ISO
SNI
(Indonesia),
ISO
(International)
ASTM, ASCE
(America)
SNI
(Indonesia),
ISO
(International)
ASTM, ASCE
(America)
Jabatan
Kerja
Konstruksi
SKKNI, IAKI,
INKINDO
Perlaturan Lembaga
LKPP No. 12 2021
27. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Standar dalam Spesifikasi Teknis
21
ASTM
Underwriter
Laboratories
Private
Testing
Concrete,
reinforcment,
steel, other
item
Building material,
fire protection,
electrical,
hazardous
location
equipment
Owner’s
preference
Testing
Spesific Condition
Exact Procedures for Testing
Lewis, 1975
29. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Gambar Teknis (Gambar Desain)
6
Mengapa Gambar Teknis Penting?
• Gambar teknis memainkan peranan yang penting dalam proyek
konstruksi. Gambar teknis sangat berperan sebagai bahasa
visual yang dapat mengkomunikasikan desain terkait
pelaksanaan konstruksi yang akan dilaksanakan
• Gambar teknis juga berperan dalam meminimalkan
kemungkinan terjadinya kesalahan dalam pelaksanaan
konstruksi yang bisa menghambat penyelesaian proyek. Dan
terakhir gambar teknis yang baik dalam suatu pelaksanaan
proyek dapat meminimalkan risiko terjadinya kecelakaan kerja
di proyek.
30. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
• Spesifikasi teknis adalah bagian dari dokumen kontrak yang berfungsi
sebagai acuan dalam menjamin kualitas selama proyek berlangsung
dengan cakupan standar, metode, bahan, dan penyelesaian pekerjaan
proyek
Definisi Spesifikasi & Gambar Teknik
12
Spesifikasi
teknis??
GAMBAR
tekniK??
• Gambar teknis adalah representasi grafis yang digunakan untuk
mengkomunikasikan informasi teknis meliputi detail rinci mengenai
bentuk, ukuran, kuantifikasi, dan disposisi semua elemen dalam
proyek konstruksi
31. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
• Drawing consist of an orderly collection of lines, circles, symbols, dimensions, and
notes that depict the size, order, general appearance, and details of a project.
Working drawings and specifications complement each others. and between
them they should cover all conditions, materials, and requirements of the project.
(Lewis, 1975)
• Gambar merupakan bahasa, dimana gambar akan memberikan penjelasan
mengenai ide atau gagasan atau pemikiran dari seseorang kepada pihak lain.
Gambar teknik adalah cara formal untuk mengkomunikasikan informasi
mengenai bentuk, ukuran, dan detail-detail lainnya dari suatu objek fisik.
(Rikanti, 2019)
• Gambar teknis merupakan representatif grafis objek dengan tujuan untuk
memfasilitasi pertukaran informasi gambar dan memastikan keseragaman
gambar pada sistem komprehensif yang berkaitan dengan beberapa fungsi teknis
(ISO 128:2003)
Definisi Gambar Teknik
11
32. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR
KK MRK ITB
Tujuan Gambar Teknik
15
Untuk mengetahui tujuan gambar teknik perlu
memahami design process.
Baik proses desain tradisional atau modern,
gambar teknis atau gambar desain meliputi
seluruh bagian dari proses desain dari awal
hingga akhir
Tujuan dari gambar teknik untuk
mendokumentasikan proses desain
Problem
Identification
Initial Ideas
Proposed
Solution
Testing Models
or Prototypes
Working
Drawings
Problem
Identification
Initial Ideas
Proposed
Solution
Testing 3D
Computer
Models
Working
Drawings
(Manual) (CAD)
Tahapan Design Process (Goetsch et. al, 2000)
33. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Fungsi Gambar Teknik
16
Fungsi dasar Gambar Teknik
Menyampaikan informasi dari suatu ide atau gagasan, yang dapat diterima lebih mudah dan lebih
cepat, selain lebih menarik dalam suatu lembar gambar yang sangat terbatas. Oleh karena itu gambar
merupakan suatu media yang lebih komunikatif.
Suatu dokumen yang lengkap dari suatu ide dan gagasan yang dapat disampaikan secara khusus,
seperti dokumen perencanaan atau perancangan, yang menyajikan informasi yang lengkap dan utuh
dari suatu perencanaan atau perancangan.
Informasi mengenai rangkaian dari suatu proses, agar proses dapat dioperasikan secara baik dan
tepat, sehingga dapat dilakukan pengendalian dari suatu proses.
Media
Informasi
Dokumen
Pengendali
Proses
34. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Peran Gambar Teknik Pada Proyek
17
36. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Aspek Legal Dokumen Teknis
Media Transfer Risiko
18
• Pada output perumusan proyek
terdapat tuntutan pemenuhan
mutu yang tertuang pada
dokumen teknis
• Risiko terpenuhi atau tidaknya
mutu yang tertuang pada
dokumen teknis masih
ditanggung owner selama belum
terdapat pihak pelaksana
konstruksi
• Dokumen teknis meliputi
Spesifikasi Teknis dan Gambar
Teknik menjadi media transfer
risiko dari owner ke penyedia
jasa pelaksana konstruksi/
kontraktor
Tahap
Inisiasi/
Formulasi
Perancangan dan
Perencanaan
Konstruksi
O&M
Owner Konsultan Kontraktor
Output
KAK,
Dokumen
Teknis
RAB,
Dokumen
Teknis
Bentuk fisik
-
Posisi Risiko
Risiko
Risiko
Risiko
Risiko
37. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Setelah dokumen-dokumen kontraktual dan juga DKH, spesifikasi
teknis menempati posisi yang lebih tinggi daripada gambar-gambar
teknis (DED).
Aspek Legal Dokumen Teknis
Order of Precedence
19
Order of precedence clause atau klausa urutan prioritas adalah istilah yang mengidentifikasi urutan di mana berbagai dokumen kontrak
diprioritaskan saat menyelesaikan konflik atau ambiguitas dalam dokumen kontrak tersebut (Leone, 2021).
Berdasarkan Pasal 4 Ayat (2) Rancangan Kontrak pada Model Dokumen Pemilihan 17 untuk Pengadaan Pekerjaan Konstruksi dengan tender
lumpsum Peraturan LKPP No.12 Tahun 2021 disebutkan:
Rincian yang tertera pada spesifikasi teknis krusial terhadap
realisasi mutu konstruksi
Dalam realisasi mutu konstruksi peran gambar teknis (DED)
digunakan sebagai kuantifikasi pekerjaan konstruksi
38. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Standar dalam Gambar Teknis
22
ISO 128
Graphical representation of objects in technical
drawings
Internasional
Nasional SNI
SNI 05-(1492 sd 1496)-1989
SNI 05-1608-1989
SNI 05-(1820 sd 1824)-1990
SNI 05-2296-1991
SNI 05-(2642 sd 2646)-1992
SNI 05-(2751 sd 2755)-1992
SNI 05-2937-1992
SNI 05-2961-1992
SNI 05-3022-1992
Dsb.
ISO 128-1 (Fundamental
Requirements)
ISO 128-2 (Line Types)
ISO 128-3 (Views, cuts, and
sections)
39. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Daur dan Jenis Gambar Teknik
24
Gambar Perencanaan
(As Plan Drawing)
Gambar Tender
(Construction Bidding)
Gambar Konstruksi
(Construction Drawing)
Gambar Kerja (Shop
Drawing)
Gambar Jadi (As Built
Drawing)
40.
41. SI-4111 - REKAYASA DAN PERANCANGAN STRUKTUR KK MRK ITB
Referensi
25
• Di Giuda, G. M. & Villa, V. B. (2017). Technical Specification For Construction Processes with BIM.
Implementing Innovative Ideas in Structural Engineering and Project Management.
• Ervianto, Wulfram I. (2018). Spesifikasi Dalam Proyek Konstruksi. Universitas Atma Jaya
Yogyakarta.
• Erdis, Ercan & Ozdemir, Sitki Alper. (2013). Analysis of Technical Specification-based Disputes in
Construction Industry. KSCE Journal of Civil Engineering 17(7):1541-1550
• Ervianto, Wulfram I. (2005). Manajemen Proyek Konstuksi. Penerbit ANDI.
• Peraturan Presiden No. 12 Tahun 2021
• Peraturan LKPP No. 12 Tahun 2021
• https://www.builderspace.com/5-types-of-construction-specifications-explained
• https://www.thenbs.com/knowledge/construction-specifications-everything-you-need-to-
know#:~:text=A%20construction%20specification%20is%20a,which%20evolves%20across%20a
%20project.