Over the last several years, the technical complexity of printed circuit boards that we fabricate on a day-to-day basis has risen exponentially. Many companies embrace this complexity, but for customers, the overall financial risk increases dramatically.
Printed circuit boards are a complex product that requires many steps to produce, and all customer’s specifications are a little different. This requires a PCB fabricator to have a very clear process and understanding of how these requirements affect production.
In this webinar, we share with you how to better understand what each of the requirements means for you and the fabricator, how to ensure that you are getting exactly what you specified and how to protect your data from falling into the wrong hands.
For more information on our printed circuit board solutions, visit https://www.epectec.com/pcb/.
Best Practices for Improving the PCB Supply Chain: Part IICheryl Tulkoff
The Foundation of a reliable product is a reliable PCB
-PCBs are always custom, critical components
Have a comprehensive strategy for selecting and qualifying PCB suppliers
-Ensures that the foundation is strong
Performing effective on site audits is a critical component of that strategy.
Join The Cable Challenge with IT'S CABLE.
Presentation of IT'S CABLE company, a cable manufacturer in Barcelona.
Key aspects for cable manufacturer in a selection process.
Project backup repository and avoiding requirements creepAswin Vijayakumar
Requirements Engineering to use a backup repository to develop a software project management methodology used within Agile. Fit Criterion, Refinery, Traceability and Deployment are key techniques
High Cost of a Low-Cost Cable Certification TesterFluke Networks
Things to consider while selecting a new certification tester for network cabling. Good certification testers also typically support performance standards for premises fiber optic cabling, and have diagnostic capabilities for both copper and fiber network cabling.
Over the last several years, the technical complexity of printed circuit boards that we fabricate on a day-to-day basis has risen exponentially. Many companies embrace this complexity, but for customers, the overall financial risk increases dramatically.
Printed circuit boards are a complex product that requires many steps to produce, and all customer’s specifications are a little different. This requires a PCB fabricator to have a very clear process and understanding of how these requirements affect production.
In this webinar, we share with you how to better understand what each of the requirements means for you and the fabricator, how to ensure that you are getting exactly what you specified and how to protect your data from falling into the wrong hands.
For more information on our printed circuit board solutions, visit https://www.epectec.com/pcb/.
Best Practices for Improving the PCB Supply Chain: Part IICheryl Tulkoff
The Foundation of a reliable product is a reliable PCB
-PCBs are always custom, critical components
Have a comprehensive strategy for selecting and qualifying PCB suppliers
-Ensures that the foundation is strong
Performing effective on site audits is a critical component of that strategy.
Join The Cable Challenge with IT'S CABLE.
Presentation of IT'S CABLE company, a cable manufacturer in Barcelona.
Key aspects for cable manufacturer in a selection process.
Project backup repository and avoiding requirements creepAswin Vijayakumar
Requirements Engineering to use a backup repository to develop a software project management methodology used within Agile. Fit Criterion, Refinery, Traceability and Deployment are key techniques
High Cost of a Low-Cost Cable Certification TesterFluke Networks
Things to consider while selecting a new certification tester for network cabling. Good certification testers also typically support performance standards for premises fiber optic cabling, and have diagnostic capabilities for both copper and fiber network cabling.
Our webinar on custom battery packs gives an insider look of the battery Development Timeline and Expectations. This walk through guide introduces you to the necessary steps that will get you from concept to production. A clear set of expectations is laid out to ensure there are no blind spots in our customers’ plan.
Industrial Ethernet,Part 2: Case StudiesControlEng
Industrial Ethernet case studies provide lessons learned as detailed in specific installations to gain practical advice from working installations, to ensure your next application uses the best practices to maximize benefits in a minimum amount of time. Ethernet survey results will be discussed. An exam and certificate are available for one professional development hour (PDH), according to Registered Continuing Education Program (RCEP) rules from the American Council of Engineering Companies.
Category 6 Patch Cord Performance
Sterling Vaden, VP of Research & Engineering, Optical Cable Corporation
OCC 100% performance tests all Cat6 and Cat6A patch cords using our own industry standard patch cord test adapters and our own industry standard test fixtures - because OCC (SMP) was involved in the creation of the standards and the test adaptors used.
IPC A-620 Training for Specialist (CIS) course is designed to improve individual discrimination skills between an acceptable or not acceptable cable or wire harness assembly per the IPC/WHMA-A-620 document. This slide set is a high-level overview of the IPC-A-620 wire and cable harness acceptability certification and training program. It is designed to give you a high-level overview of this acceptability of wire harnesses.
With many qualified and capable system integrators already installing Enterprise Wi-Fi, we ask if this could be extended to self-installed Enterprise Small Cells to enable rapid take-up of Small Cells while solving the issue of poor indoor coverage? We look at the business case, the technology options and the tools and capabilities required to make this happen.
Presented by David Chambers/ThinkSmallCell, Alan McNab/Cisco and Benoit Fleury/iBwave, this webinar examines these issues and discusses practical experience from the field.
After short presentations from each presenter, we answer a varied range of questions from the audience which can be listened to on the video recording linked to this slide deck.
Cable Certification - Six Reasons It Is More Important Than EverFluke Networks
The most thorough testing for network cabling is certification. Certification proves that a cabling system adheres to rigorous
standards for performance and installation workmanship. Cable certification requires trained technicians and specialized
test equipment.
Boundary scan has become an indispensable technology as engineers like you face increasing test challenges. Agilent is proud to introduce the new x1149 Boundary Scan Analyzer - bringing the best of our technology and vast test experience - to your workbench!
Are you IEC61439 ready?
Compliance with the new standard will be compulsory once this standard supersede AS/NZS 3439 series. All assemblies must be shown to meet minimum safety and performance standards by design and routine verification. Many of the alternatives to type testing rely on interpolation from a tested reference design.
Why and how to get ipc 610 certification Royalbindi1
For the electronics manufacturing industry, 2021 will be a ‘year for recovery’ as jobs and demand for electronic components will increase. Manufacturing companies and professionals wondering how to get IPC 610 certification during the pandemic are in luck.
Bottom Tank Inspection by Manual & Mapping Tank Floor Bottom Scanner
Dimensional Control Survey , Storage Tank Inspection
Above Ground Storage Tank Evaluation Program
• Our Above Ground Tank Inspection services include:
• Nondestructive testing services
• Ultrasonic thickness measurement using our DX-20 remote crawler
• MFE 2412 floor scanner
• DX-20 Magnetically- Attached Ultrasonic / Remote Visual Testing Crawler
• Our Tank Inspection Qualifications include:
• API 653 certified inspectors
Mechanical Integrity Program capabilities:
• Thickness Inspections
• Engineering Evaluations
• Corrosion Rate and Remaining Life Determination
• Fitness For Service Evaluations (FFS)
• Turnkey Tank Management Program
Our targeted tank inspections look to find and quantify such damage and deterioration phenomenon as:
• Corrosion Rate
• Remaining Life
• Under Floor Corrosion
• Corrosion Under Insulation (CUI)
• Tide Line and Corrosion Zones
• Settlement and Planar Tilt
Above Ground Storage Tanks within our inspection expertise include:
• SP-001 Tanks
• UL-58
Our inspections are tailored to your process equipment and risk mediation programs such as:
• Mechanical Integrity Program (MIP)
• Process Safety Management (PSM)
• Spill Prevention Control and Countermeasure (SPCC)
• Resource Conservation and Recovery Act (RCRA)
• Chlorine and Chlorine Dioxide Service
• Flammable or Hazardous Chemicals
• Proprietary Process Chemicals
We utilize the following tests in our inspections to gain an understanding of the condition of your equipment.
• Visual Inspections (VT)
• Ultrasonic Thickness Testing (UTT)
• Magnetic Particle Testing (MT)
• Penetrant Testing (PT)
• Radiographic Testing (RT)
• Magnetic Flux Leak Detection (MFL)
• Vacuum Box Testing (VBT)
Peripheral Considerations:
• Secondary Containment Sizing
Our API inspectors have been properly trained and certified and commmonly perform API 653 tank inspections. Many industries call upon iFluids to perform other popular services according to the API 570 and API 510 standards.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Our webinar on custom battery packs gives an insider look of the battery Development Timeline and Expectations. This walk through guide introduces you to the necessary steps that will get you from concept to production. A clear set of expectations is laid out to ensure there are no blind spots in our customers’ plan.
Industrial Ethernet,Part 2: Case StudiesControlEng
Industrial Ethernet case studies provide lessons learned as detailed in specific installations to gain practical advice from working installations, to ensure your next application uses the best practices to maximize benefits in a minimum amount of time. Ethernet survey results will be discussed. An exam and certificate are available for one professional development hour (PDH), according to Registered Continuing Education Program (RCEP) rules from the American Council of Engineering Companies.
Category 6 Patch Cord Performance
Sterling Vaden, VP of Research & Engineering, Optical Cable Corporation
OCC 100% performance tests all Cat6 and Cat6A patch cords using our own industry standard patch cord test adapters and our own industry standard test fixtures - because OCC (SMP) was involved in the creation of the standards and the test adaptors used.
IPC A-620 Training for Specialist (CIS) course is designed to improve individual discrimination skills between an acceptable or not acceptable cable or wire harness assembly per the IPC/WHMA-A-620 document. This slide set is a high-level overview of the IPC-A-620 wire and cable harness acceptability certification and training program. It is designed to give you a high-level overview of this acceptability of wire harnesses.
With many qualified and capable system integrators already installing Enterprise Wi-Fi, we ask if this could be extended to self-installed Enterprise Small Cells to enable rapid take-up of Small Cells while solving the issue of poor indoor coverage? We look at the business case, the technology options and the tools and capabilities required to make this happen.
Presented by David Chambers/ThinkSmallCell, Alan McNab/Cisco and Benoit Fleury/iBwave, this webinar examines these issues and discusses practical experience from the field.
After short presentations from each presenter, we answer a varied range of questions from the audience which can be listened to on the video recording linked to this slide deck.
Cable Certification - Six Reasons It Is More Important Than EverFluke Networks
The most thorough testing for network cabling is certification. Certification proves that a cabling system adheres to rigorous
standards for performance and installation workmanship. Cable certification requires trained technicians and specialized
test equipment.
Boundary scan has become an indispensable technology as engineers like you face increasing test challenges. Agilent is proud to introduce the new x1149 Boundary Scan Analyzer - bringing the best of our technology and vast test experience - to your workbench!
Are you IEC61439 ready?
Compliance with the new standard will be compulsory once this standard supersede AS/NZS 3439 series. All assemblies must be shown to meet minimum safety and performance standards by design and routine verification. Many of the alternatives to type testing rely on interpolation from a tested reference design.
Why and how to get ipc 610 certification Royalbindi1
For the electronics manufacturing industry, 2021 will be a ‘year for recovery’ as jobs and demand for electronic components will increase. Manufacturing companies and professionals wondering how to get IPC 610 certification during the pandemic are in luck.
Bottom Tank Inspection by Manual & Mapping Tank Floor Bottom Scanner
Dimensional Control Survey , Storage Tank Inspection
Above Ground Storage Tank Evaluation Program
• Our Above Ground Tank Inspection services include:
• Nondestructive testing services
• Ultrasonic thickness measurement using our DX-20 remote crawler
• MFE 2412 floor scanner
• DX-20 Magnetically- Attached Ultrasonic / Remote Visual Testing Crawler
• Our Tank Inspection Qualifications include:
• API 653 certified inspectors
Mechanical Integrity Program capabilities:
• Thickness Inspections
• Engineering Evaluations
• Corrosion Rate and Remaining Life Determination
• Fitness For Service Evaluations (FFS)
• Turnkey Tank Management Program
Our targeted tank inspections look to find and quantify such damage and deterioration phenomenon as:
• Corrosion Rate
• Remaining Life
• Under Floor Corrosion
• Corrosion Under Insulation (CUI)
• Tide Line and Corrosion Zones
• Settlement and Planar Tilt
Above Ground Storage Tanks within our inspection expertise include:
• SP-001 Tanks
• UL-58
Our inspections are tailored to your process equipment and risk mediation programs such as:
• Mechanical Integrity Program (MIP)
• Process Safety Management (PSM)
• Spill Prevention Control and Countermeasure (SPCC)
• Resource Conservation and Recovery Act (RCRA)
• Chlorine and Chlorine Dioxide Service
• Flammable or Hazardous Chemicals
• Proprietary Process Chemicals
We utilize the following tests in our inspections to gain an understanding of the condition of your equipment.
• Visual Inspections (VT)
• Ultrasonic Thickness Testing (UTT)
• Magnetic Particle Testing (MT)
• Penetrant Testing (PT)
• Radiographic Testing (RT)
• Magnetic Flux Leak Detection (MFL)
• Vacuum Box Testing (VBT)
Peripheral Considerations:
• Secondary Containment Sizing
Our API inspectors have been properly trained and certified and commmonly perform API 653 tank inspections. Many industries call upon iFluids to perform other popular services according to the API 570 and API 510 standards.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Water billing management system project report.pdfKamal Acharya
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
5. An example of how bad
reliability can cost
RELIABILITY
208 pieces of a 10 layer board
• Sourced: Directly within Europe
• Criteria: Shortest lead time
• Price: Unknown.
Result = Suspected black pad
11. Conformance to requirements
”Every product has a requirement, a specification, a
description of what is expected. When this is met, it
has achieved quality. Assuming that the requirement
actually describes what the customer really expects
or needs.”
defined by P. Crosby
What is the first principle of “zero defects”?
IPC / STANDARDS
43. • Good / qualitative sourcing is essential.
• Make sure all involved within the supply chain (internal and
external) clearly knows and understands the demands.
• Be prepared to pay correct price – lowest price does NOT equal
lowest total cost!
• Ensure that you are using a specification that is understandable
and correct.
• Refer to well-known standards where applicable
• Choose a realistic process of verification on a product level
based on the demands on the end product.
Conclusions
Do not over specify. This is as important as not under specifying.