The document summarizes information about the MEZ-SYPHON-FLANGE system, including: 1. It complies with DIN 24194/part 1 requirements for tightness through an integrated siphon. 2. It is made of galvanized steel with a thickness of 1.25mm and has a moment of inertia of 3,220 cm4. 3. Installation guidelines specify maximum edge lengths for ducts depending on their pressure class.

1. 1.1 MEZ-SYPHON-FLANGE ®
1.1
MEZ-FLANGE-SYSTEM ®
1.1.3 MEZ-SYPHON-FLANGE SYSTEM 40
Complies to all requirements under
DIN 24194 / part 1 29,0
- Higher degree of tightness through an integrated siphon
- 148 S with injected sealing compound (sealant) 33,2
- Profile length: 5000 mm
4
2419
Art.-Nr Material Material Moment of VPE Weight DIN
üV
RW T
thickness/mm inertia/cm4 m kg/m
148S Galvanised steel 1,25 3,220 250 1,403
148S Galvanised steel 1,25 3,220 250 1,403
Workmanship Guidelines:
Maximum edge length (mm)
0500 PA 1000 PA 2500 PA - The duct grooved seams do not need to be notched up
3000 mm 2700 mm 2500 mm - For details on frame production see technical features
MEZ-CORNER 33,2
- Corner to be inserted into the duct wall 120,0
- Sealing done on the front side of duct and on the inside
board of the angled corner
Art.-Nr Material Material Screw hole Deduction VPE Weight
thickness/mm mm mass mm units kg/piece
248 Galvanised steel 4,00 26 x 13 30 200 0,184
All Rights Reserved