The document describes a manual adjuster for valves used to regulate air flow. It has brass bearings that allow it to operate at high temperatures up to 250°C. It consists of a lever, fastening segment, clamping screw, ball bearing, PVC bearing bush, and retaining rings. It is ideal for rectangular and circular air duct systems as it is easy to assemble using a rivet on a four-point connection.

1. 3.1 MANUAL ADJUSTER for valves
3.1
REGULATION OF AIR FLOW
Manual adjuster for valves with counter bearings
3.1.6 MEZ-DAMPER VALVE FSH / heat resistant
with brass bearings, ideal for high operating temperatures – till max. +250°C
Product description:
- Lever using wing screw
- Fastening segment
- Clamping screw
- Ball bearing-equalising shim washer
- 2 units PVC bearing bush
- 2 units retaining rings
Art.-Nr. Material A B C DØ E S Blade VPE Weight
breadth units kg /unit
363 Galv. steel 140 100 10 10 165 1,5 700 1 0,360
363 E Stainless steel 140 100 10 10 165 1,5 700 1 0,360
Individual customisation on request
Workmanship + Assembling:
- Ideal for rectangular and circular air duct systems
- Easy to assemble using a rivet on a four-point connection
- The bending point has been constructed to match to the different pipe forms
MEZ-AXLE 76
45 31
Art.-Nr. Material Ø VPE Weight
mm kg /unit 50
375 Galv. steel 10 1 0,050 19 31
All Rights Reserved