1. Ultrasound Basics.pptx
•Download as PPTX, PDF•
0 likes•4 views
Ultrasound is produced by piezoelectric transducers that use crystals such as quartz. Quartz crystals are made up of silicon and oxygen ions that slightly displace when an electric field is applied, causing the crystal to vibrate. These vibrations generate ultrasound waves above the range of human hearing. Piezoelectric transducers can both generate and receive ultrasound, as the crystals produce voltage when subjected to ultrasound waves.
Report
Share
Report
Share
Recommended
Ultrasonic
Ultrasonic waves are sound waves with a frequency greater than 20 kHz that are inaudible to humans. They have a shorter wavelength and greater penetrating power than audible sound waves. Ultrasonic waves are produced using either magnetostriction or piezoelectric generators. Magnetostriction generators use the magnetostriction effect to induce vibrations in a ferromagnetic rod using an alternating magnetic field, while piezoelectric generators use the inverse piezoelectric effect to induce vibrations in quartz crystals when an alternating voltage is applied. Ultrasonic waves have various applications including in medical diagnostics and non-destructive testing.
ultrasonic
Ultrasonic waves are sound waves with frequencies above the human hearing range of 20 kHz. They can be produced using magnetostriction or piezoelectric generators. A magnetostriction generator uses the magnetostrictive effect where a ferromagnetic rod vibrates under an alternating magnetic field, producing ultrasonic waves. A piezoelectric generator uses the inverse piezoelectric effect where an alternating electric field makes a quartz crystal vibrate longitudinally to generate ultrasonic waves. Both methods allow controlling the frequency by adjusting resonant circuits to match the natural vibration frequency of the rod or crystal. Piezoelectric generators can produce higher frequencies up to 500 MHz but are more expensive than magnetostriction generators
Ultrasonics
ultrasonics basic concepts, magnetostriction effect, piezoelectric effect, application of ultrasonics , merits and demerits of ultrasonics
ultrasonic
This document discusses ultrasonics and methods for producing ultrasonic waves. It begins with an introduction to ultrasonics, defining ultrasonic waves as sound waves with frequencies above 20,000 Hz. It then describes two common methods for ultrasonic wave production: magnetostriction generators and piezoelectric generators. The magnetostriction generator uses the magnetostrictive effect to induce vibrations in a ferromagnetic rod, while the piezoelectric generator uses the inverse piezoelectric effect to induce vibrations in a quartz crystal plate. Both methods are described in detail, including their working principles, construction, advantages, and disadvantages.
Ultrasonic.sahilpatil.firstyeardeploma.pptx
Ultrasonic waves are sound waves with frequencies above the human hearing range of 20 kHz. They are produced using magnetostriction or piezoelectric generators and can be used for applications like flaw detection, drilling, welding, cleaning, and medical imaging. In medicine, ultrasonic waves are used for diagnostic sonography to visualize internal organs and monitor pregnancies, as well as focused ultrasound surgery to treat tumors and other disorders.
ULTRASONICS
This document discusses ultrasonics and its applications. It begins with an introduction to ultrasonic waves, including their properties and production methods such as magnetostriction and piezoelectric methods. Next, it describes common detection methods and applications of ultrasonics such as non-destructive testing to detect flaws in metals using ultrasonic beams. In closing, it provides a brief example of using ultrasonics for non-destructive testing to examine reflected echoes on an oscilloscope and detect flaws in materials.
X-ray Production
This document provides an overview of x-ray production. It discusses how x-rays are produced through interactions between electrons and heavy atomic number targets. It describes the discovery of x-rays by Roentgen in 1895 and some key properties. The document then explains the basic processes of bremsstrahlung and characteristic x-ray production in more detail. It also discusses x-ray tube design components like the cathode, anode, vacuum, and housing needed to generate x-rays.
B.tech sem i engineering physics u v chapter 2-ultrasonic waves
This document discusses ultrasonic waves and their properties and production methods. It describes how ultrasonic waves are produced using magnetostriction and piezoelectric generators. The magnetostriction method uses the magnetostrictive effect in ferromagnetic rods to produce ultrasonic vibrations, while the piezoelectric method uses the inverse piezoelectric effect in quartz crystals. The document also covers the detection of ultrasonic waves and some of their applications, including non-destructive testing of metals and ultrasonic drilling.
Recommended
Ultrasonic
Ultrasonic waves are sound waves with a frequency greater than 20 kHz that are inaudible to humans. They have a shorter wavelength and greater penetrating power than audible sound waves. Ultrasonic waves are produced using either magnetostriction or piezoelectric generators. Magnetostriction generators use the magnetostriction effect to induce vibrations in a ferromagnetic rod using an alternating magnetic field, while piezoelectric generators use the inverse piezoelectric effect to induce vibrations in quartz crystals when an alternating voltage is applied. Ultrasonic waves have various applications including in medical diagnostics and non-destructive testing.
ultrasonic
Ultrasonic waves are sound waves with frequencies above the human hearing range of 20 kHz. They can be produced using magnetostriction or piezoelectric generators. A magnetostriction generator uses the magnetostrictive effect where a ferromagnetic rod vibrates under an alternating magnetic field, producing ultrasonic waves. A piezoelectric generator uses the inverse piezoelectric effect where an alternating electric field makes a quartz crystal vibrate longitudinally to generate ultrasonic waves. Both methods allow controlling the frequency by adjusting resonant circuits to match the natural vibration frequency of the rod or crystal. Piezoelectric generators can produce higher frequencies up to 500 MHz but are more expensive than magnetostriction generators
Ultrasonics
ultrasonics basic concepts, magnetostriction effect, piezoelectric effect, application of ultrasonics , merits and demerits of ultrasonics
ultrasonic
This document discusses ultrasonics and methods for producing ultrasonic waves. It begins with an introduction to ultrasonics, defining ultrasonic waves as sound waves with frequencies above 20,000 Hz. It then describes two common methods for ultrasonic wave production: magnetostriction generators and piezoelectric generators. The magnetostriction generator uses the magnetostrictive effect to induce vibrations in a ferromagnetic rod, while the piezoelectric generator uses the inverse piezoelectric effect to induce vibrations in a quartz crystal plate. Both methods are described in detail, including their working principles, construction, advantages, and disadvantages.
Ultrasonic.sahilpatil.firstyeardeploma.pptx
Ultrasonic waves are sound waves with frequencies above the human hearing range of 20 kHz. They are produced using magnetostriction or piezoelectric generators and can be used for applications like flaw detection, drilling, welding, cleaning, and medical imaging. In medicine, ultrasonic waves are used for diagnostic sonography to visualize internal organs and monitor pregnancies, as well as focused ultrasound surgery to treat tumors and other disorders.
ULTRASONICS
This document discusses ultrasonics and its applications. It begins with an introduction to ultrasonic waves, including their properties and production methods such as magnetostriction and piezoelectric methods. Next, it describes common detection methods and applications of ultrasonics such as non-destructive testing to detect flaws in metals using ultrasonic beams. In closing, it provides a brief example of using ultrasonics for non-destructive testing to examine reflected echoes on an oscilloscope and detect flaws in materials.
X-ray Production
This document provides an overview of x-ray production. It discusses how x-rays are produced through interactions between electrons and heavy atomic number targets. It describes the discovery of x-rays by Roentgen in 1895 and some key properties. The document then explains the basic processes of bremsstrahlung and characteristic x-ray production in more detail. It also discusses x-ray tube design components like the cathode, anode, vacuum, and housing needed to generate x-rays.
B.tech sem i engineering physics u v chapter 2-ultrasonic waves
This document discusses ultrasonic waves and their properties and production methods. It describes how ultrasonic waves are produced using magnetostriction and piezoelectric generators. The magnetostriction method uses the magnetostrictive effect in ferromagnetic rods to produce ultrasonic vibrations, while the piezoelectric method uses the inverse piezoelectric effect in quartz crystals. The document also covers the detection of ultrasonic waves and some of their applications, including non-destructive testing of metals and ultrasonic drilling.
frequency meters.pptx
The mechanical frequency meter uses a set of reeds of varying natural frequencies that are attracted to an electromagnet connected to the power supply. The reed that vibrates with the greatest amplitude at a given supply frequency indicates the frequency on the meter's scale.
The electrical frequency meter operates on the principle of electrical resonance. It contains a fixed coil and a movable coil on an iron core. When the supply frequency matches the resonant frequency set by the capacitance and inductance of the movable coil, no torque acts on it, causing the pointer to indicate the frequency on the dial. As the supply frequency changes, the pointer rotates to a new position matching the new resonant frequency.
Production of x rays
X-rays are produced when high-energy electrons collide with a metal target in an x-ray tube. Electrons are emitted from a heated cathode and accelerated toward the anode by a high voltage potential. Some electrons interact with atoms in the anode, producing x-ray photons. X-rays have different energies depending on the target material and voltage used. Additional filtration is often applied to produce clinically useful x-ray beams. Exposure factors like voltage, current, and time determine the quantity and quality of the emitted x-rays. X-rays are used to generate medical images by exploiting their ability to pass through and be absorbed by different tissues.
ULTRASONIC wave
Ultrasonic waves are sound waves above 20,000 Hz that can be generated using a magnetostriction oscillator. The oscillator works by applying an alternating magnetic field to a ferromagnetic rod, causing it to vibrate longitudinally above 20,000 Hz. This produces ultrasonic waves that are emitted from the ends of the rod. The rod is clamped between coils connected to an oscillator circuit containing a transistor, capacitor and coils. Feedback between the coils drives oscillations in the rod at the resonant frequency set by the capacitor, generating high frequency ultrasonic sound waves.
Ultrasonics
This document discusses ultrasonics. It defines ultrasonics as sound waves with frequencies above the audible range of 20 kHz. It describes how ultrasonics are produced using piezoelectric generators and thermal and sensitive flame detection methods. It also outlines several applications of ultrasonics such as detecting flaws in metals, sonar, welding, cutting and soldering.
ultrasonic.pptx
This document discusses ultrasonic generation and applications. It begins by defining ultrasonics as sound waves with frequencies above 20 kHz. It then lists the names and roll numbers of 5 students and the topic of their project. The document goes on to explain two methods of ultrasonic generation: magnetostriction and piezoelectric. It describes the principles and experimental setups for each method. The document also notes some properties and limitations of ultrasonic waves as well as their various applications in fields like medicine, industry, and everyday life.
Ultrasonics
Will cover Ultrasonic Definition, its properties in nature and its 2 methods of production i.e. Piezoelectric and magnetostriction methods with their definitions, principle and working of their respective generators. And lastly, applications of Ultrasonic waves.
usgphysics-151102111226-lva1-app6892.pdf
This document provides an overview of ultrasound physics, transducers, and transducer jelly. It discusses the characteristics of sound waves including their need for a medium, generation through vibration, and properties like frequency and wavelength. It describes the history and components of ultrasound transducers, focusing on how piezoelectric crystals convert electrical signals to sound and vice versa. It also summarizes the key properties and roles of transducer jelly in ultrasound imaging.
ULTRASOUND PHYSICS
This document provides an overview of ultrasound physics, transducers, and transducer jelly. It discusses the characteristics of sound waves including their generation through mechanical vibration and their transmission through solids, liquids, and gases. The history of ultrasound and piezoelectricity is summarized. Key ultrasound concepts like wavelength, frequency, propagation velocity, amplitude, and absorption are defined. The components and function of ultrasound transducers including the piezoelectric crystal and backing block are described. Finally, the properties and ingredients of transducer jelly used to couple the transducer to the skin are outlined.
Radioactivity and production of X-rays - Sachin
This document discusses radioactivity and the production of x-rays. It begins by describing the structure of atoms and different types of radioactive decay such as alpha, beta, and gamma rays. It then discusses concepts like decay constant and half-life. Different modes of radioactive decay like alpha and beta particle decay are explained. The document also covers nuclear reactions, fission, fusion, and how x-rays are produced when high-speed electrons interact with matter. It provides details on the components of an x-ray tube and the physics behind bremsstrahlung and characteristic x-ray production.
Crystal oscillator
This document summarizes a student's presentation on crystal oscillators. It begins with an introduction explaining that a crystal oscillator uses a piezoelectric crystal to create a precise electrical signal. It then discusses the crystal structure and materials used, primarily quartz, as well as the basic harmonic oscillator structure and equivalent circuit of a crystal oscillator. Applications mentioned include use in electronics for timekeeping, communications, and industrial/consumer devices.
B.Tech sem I Engineering Physics U-V Chapter 2-Ultrasonic waves
This document discusses ultrasonic waves and their production and applications. It begins with an introduction to ultrasonics, defining ultrasonic waves as sound waves with frequencies above 20,000 Hz. It then describes two common methods for producing ultrasonic waves: magnetostriction generators that use the magnetostrictive effect in ferromagnetic materials, and piezoelectric generators that use the inverse piezolectric effect in crystals like quartz. The document concludes by outlining several applications of ultrasonics in fields like non-destructive testing, welding, cleaning, and SONAR systems.
BTech_Unit_I.pptx Ultrasonic sound ppt for students
ppt on ultrasonic sound
very help full
electrical students
all the information related to ultasonic sound which is important to diploma students
UNIT II-microwave sources (1).pptx
Microwave sources produce electromagnetic waves with wavelengths ranging from one meter to one millimeter. Common microwave sources include circuits in devices like radar and microwave ovens. Microwave ovens use a device called a magnetron to generate microwaves that heat food by causing water molecules to vibrate. Microwave tubes like klystrons, magnetrons, and traveling wave tubes are used to generate and amplify microwaves. Klystrons function by using cavities to modulate electron beams, forming bunches that amplify microwave signals as they pass through subsequent cavities. Reflex klystrons use a single cavity and repeller electrode to reflect electron beams and sustain oscillations.
Ultrasound therapy
This document discusses ultrasound, including its physics, production, effects, and therapeutic uses. It defines ultrasound and discusses how it is produced using the piezoelectric effect. The main physical effects of ultrasound are heating, cavitation, acoustic streaming, and microstreaming. Thermally, ultrasound can increase tissue extensibility and reduce pain and muscle spasm. Non-thermally, it can increase membrane permeability and ion diffusion through cavitation. The document outlines appropriate ultrasound parameters and treatment techniques to maximize benefits and minimize risks.
Ultrasoundtherapy 150201220726-conversion-gate02 (1)
This document provides an overview of ultrasound, including its physics, production, effects, uses, and treatment parameters. It defines ultrasound and discusses how it is produced via the piezoelectric effect. The key effects of ultrasound are thermal (heating tissues) and non-thermal (cavitation, acoustic streaming, microstreaming). Ultrasound has therapeutic uses for pain relief, increasing tissue extensibility, and promoting healing. Treatment parameters like intensity, duty cycle, and frequency are described.
Usg physics
This document provides an overview of ultrasound physics. It discusses the history of ultrasound, including its discovery and development of the piezoelectric effect. It defines sound and ultrasound, and describes the mechanics of ultrasound including transducers, wavelength, velocity, amplitude, and frequency. It also covers the interaction of ultrasound with tissues through reflection, refraction, absorption, and scattering. Common ultrasound imaging artifacts are discussed. In summary, the document provides a comprehensive review of ultrasound physics principles and how they enable medical ultrasound imaging.
ultrasonic
Ultrasonic waves are sound waves with frequencies above the audible range. This document discusses the properties, production, and applications of ultrasonic waves including non-destructive testing. It describes how ultrasonic waves are produced using magnetostriction and piezoelectric generators and how their frequencies are determined. Methods of using ultrasonic waves like the acoustic grating technique and sonar for underwater detection are also summarized. Non-destructive testing using ultrasonic waves is described as a way to locate flaws in materials without damaging them.
Production of xrays
The copper in a stationary anode plays a dual role:
1. It supports the tungsten target.
2. It efficiently removes heat from the tungsten target.
Copper acts as a heat sink, drawing heat away from the tungsten target to prevent it from overheating due to the energy deposited by bombarding electrons.
Polarisation
This document discusses polarization of light and different methods of producing polarized light. It begins by explaining that light waves are transverse waves and therefore can be polarized, proving that EM waves are transverse. It then discusses different types of polarization including linear, circular, and unpolarized polarization. Various methods for producing polarized light are described such as polarizers using wire grids, Polaroid sheets, reflection at Brewster's angle, and double refraction in crystals. Polarization concepts such as Malus' law are also covered. Practical applications like anti-glare car headlights and adjustable tint windows are briefly mentioned.
Piezo electric transducer
The document discusses the piezoelectric effect, which causes certain crystals to generate an electric charge in response to applied mechanical stress. It produces concise summaries of key points, including that piezoelectricity is found in natural crystals like quartz as well as synthetic and polarized ferroelectric materials. Common piezoelectric material groups and their use in transducers, generators, and applications like sensors, medical imaging, and smart structures are also summarized.
在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
More Related Content
Similar to 1. Ultrasound Basics.pptx
frequency meters.pptx
The mechanical frequency meter uses a set of reeds of varying natural frequencies that are attracted to an electromagnet connected to the power supply. The reed that vibrates with the greatest amplitude at a given supply frequency indicates the frequency on the meter's scale.
The electrical frequency meter operates on the principle of electrical resonance. It contains a fixed coil and a movable coil on an iron core. When the supply frequency matches the resonant frequency set by the capacitance and inductance of the movable coil, no torque acts on it, causing the pointer to indicate the frequency on the dial. As the supply frequency changes, the pointer rotates to a new position matching the new resonant frequency.
Production of x rays
X-rays are produced when high-energy electrons collide with a metal target in an x-ray tube. Electrons are emitted from a heated cathode and accelerated toward the anode by a high voltage potential. Some electrons interact with atoms in the anode, producing x-ray photons. X-rays have different energies depending on the target material and voltage used. Additional filtration is often applied to produce clinically useful x-ray beams. Exposure factors like voltage, current, and time determine the quantity and quality of the emitted x-rays. X-rays are used to generate medical images by exploiting their ability to pass through and be absorbed by different tissues.
ULTRASONIC wave
Ultrasonic waves are sound waves above 20,000 Hz that can be generated using a magnetostriction oscillator. The oscillator works by applying an alternating magnetic field to a ferromagnetic rod, causing it to vibrate longitudinally above 20,000 Hz. This produces ultrasonic waves that are emitted from the ends of the rod. The rod is clamped between coils connected to an oscillator circuit containing a transistor, capacitor and coils. Feedback between the coils drives oscillations in the rod at the resonant frequency set by the capacitor, generating high frequency ultrasonic sound waves.
Ultrasonics
This document discusses ultrasonics. It defines ultrasonics as sound waves with frequencies above the audible range of 20 kHz. It describes how ultrasonics are produced using piezoelectric generators and thermal and sensitive flame detection methods. It also outlines several applications of ultrasonics such as detecting flaws in metals, sonar, welding, cutting and soldering.
ultrasonic.pptx
This document discusses ultrasonic generation and applications. It begins by defining ultrasonics as sound waves with frequencies above 20 kHz. It then lists the names and roll numbers of 5 students and the topic of their project. The document goes on to explain two methods of ultrasonic generation: magnetostriction and piezoelectric. It describes the principles and experimental setups for each method. The document also notes some properties and limitations of ultrasonic waves as well as their various applications in fields like medicine, industry, and everyday life.
Ultrasonics
Will cover Ultrasonic Definition, its properties in nature and its 2 methods of production i.e. Piezoelectric and magnetostriction methods with their definitions, principle and working of their respective generators. And lastly, applications of Ultrasonic waves.
usgphysics-151102111226-lva1-app6892.pdf
This document provides an overview of ultrasound physics, transducers, and transducer jelly. It discusses the characteristics of sound waves including their need for a medium, generation through vibration, and properties like frequency and wavelength. It describes the history and components of ultrasound transducers, focusing on how piezoelectric crystals convert electrical signals to sound and vice versa. It also summarizes the key properties and roles of transducer jelly in ultrasound imaging.
ULTRASOUND PHYSICS
This document provides an overview of ultrasound physics, transducers, and transducer jelly. It discusses the characteristics of sound waves including their generation through mechanical vibration and their transmission through solids, liquids, and gases. The history of ultrasound and piezoelectricity is summarized. Key ultrasound concepts like wavelength, frequency, propagation velocity, amplitude, and absorption are defined. The components and function of ultrasound transducers including the piezoelectric crystal and backing block are described. Finally, the properties and ingredients of transducer jelly used to couple the transducer to the skin are outlined.
Radioactivity and production of X-rays - Sachin
This document discusses radioactivity and the production of x-rays. It begins by describing the structure of atoms and different types of radioactive decay such as alpha, beta, and gamma rays. It then discusses concepts like decay constant and half-life. Different modes of radioactive decay like alpha and beta particle decay are explained. The document also covers nuclear reactions, fission, fusion, and how x-rays are produced when high-speed electrons interact with matter. It provides details on the components of an x-ray tube and the physics behind bremsstrahlung and characteristic x-ray production.
Crystal oscillator
This document summarizes a student's presentation on crystal oscillators. It begins with an introduction explaining that a crystal oscillator uses a piezoelectric crystal to create a precise electrical signal. It then discusses the crystal structure and materials used, primarily quartz, as well as the basic harmonic oscillator structure and equivalent circuit of a crystal oscillator. Applications mentioned include use in electronics for timekeeping, communications, and industrial/consumer devices.
B.Tech sem I Engineering Physics U-V Chapter 2-Ultrasonic waves
This document discusses ultrasonic waves and their production and applications. It begins with an introduction to ultrasonics, defining ultrasonic waves as sound waves with frequencies above 20,000 Hz. It then describes two common methods for producing ultrasonic waves: magnetostriction generators that use the magnetostrictive effect in ferromagnetic materials, and piezoelectric generators that use the inverse piezolectric effect in crystals like quartz. The document concludes by outlining several applications of ultrasonics in fields like non-destructive testing, welding, cleaning, and SONAR systems.
BTech_Unit_I.pptx Ultrasonic sound ppt for students
ppt on ultrasonic sound
very help full
electrical students
all the information related to ultasonic sound which is important to diploma students
UNIT II-microwave sources (1).pptx
Microwave sources produce electromagnetic waves with wavelengths ranging from one meter to one millimeter. Common microwave sources include circuits in devices like radar and microwave ovens. Microwave ovens use a device called a magnetron to generate microwaves that heat food by causing water molecules to vibrate. Microwave tubes like klystrons, magnetrons, and traveling wave tubes are used to generate and amplify microwaves. Klystrons function by using cavities to modulate electron beams, forming bunches that amplify microwave signals as they pass through subsequent cavities. Reflex klystrons use a single cavity and repeller electrode to reflect electron beams and sustain oscillations.
Ultrasound therapy
This document discusses ultrasound, including its physics, production, effects, and therapeutic uses. It defines ultrasound and discusses how it is produced using the piezoelectric effect. The main physical effects of ultrasound are heating, cavitation, acoustic streaming, and microstreaming. Thermally, ultrasound can increase tissue extensibility and reduce pain and muscle spasm. Non-thermally, it can increase membrane permeability and ion diffusion through cavitation. The document outlines appropriate ultrasound parameters and treatment techniques to maximize benefits and minimize risks.
Ultrasoundtherapy 150201220726-conversion-gate02 (1)
This document provides an overview of ultrasound, including its physics, production, effects, uses, and treatment parameters. It defines ultrasound and discusses how it is produced via the piezoelectric effect. The key effects of ultrasound are thermal (heating tissues) and non-thermal (cavitation, acoustic streaming, microstreaming). Ultrasound has therapeutic uses for pain relief, increasing tissue extensibility, and promoting healing. Treatment parameters like intensity, duty cycle, and frequency are described.
Usg physics
This document provides an overview of ultrasound physics. It discusses the history of ultrasound, including its discovery and development of the piezoelectric effect. It defines sound and ultrasound, and describes the mechanics of ultrasound including transducers, wavelength, velocity, amplitude, and frequency. It also covers the interaction of ultrasound with tissues through reflection, refraction, absorption, and scattering. Common ultrasound imaging artifacts are discussed. In summary, the document provides a comprehensive review of ultrasound physics principles and how they enable medical ultrasound imaging.
ultrasonic
Ultrasonic waves are sound waves with frequencies above the audible range. This document discusses the properties, production, and applications of ultrasonic waves including non-destructive testing. It describes how ultrasonic waves are produced using magnetostriction and piezoelectric generators and how their frequencies are determined. Methods of using ultrasonic waves like the acoustic grating technique and sonar for underwater detection are also summarized. Non-destructive testing using ultrasonic waves is described as a way to locate flaws in materials without damaging them.
Production of xrays
The copper in a stationary anode plays a dual role:
1. It supports the tungsten target.
2. It efficiently removes heat from the tungsten target.
Copper acts as a heat sink, drawing heat away from the tungsten target to prevent it from overheating due to the energy deposited by bombarding electrons.
Polarisation
This document discusses polarization of light and different methods of producing polarized light. It begins by explaining that light waves are transverse waves and therefore can be polarized, proving that EM waves are transverse. It then discusses different types of polarization including linear, circular, and unpolarized polarization. Various methods for producing polarized light are described such as polarizers using wire grids, Polaroid sheets, reflection at Brewster's angle, and double refraction in crystals. Polarization concepts such as Malus' law are also covered. Practical applications like anti-glare car headlights and adjustable tint windows are briefly mentioned.
Piezo electric transducer
The document discusses the piezoelectric effect, which causes certain crystals to generate an electric charge in response to applied mechanical stress. It produces concise summaries of key points, including that piezoelectricity is found in natural crystals like quartz as well as synthetic and polarized ferroelectric materials. Common piezoelectric material groups and their use in transducers, generators, and applications like sensors, medical imaging, and smart structures are also summarized.
Similar to 1. Ultrasound Basics.pptx (20)
B.Tech sem I Engineering Physics U-V Chapter 2-Ultrasonic waves
B.Tech sem I Engineering Physics U-V Chapter 2-Ultrasonic waves
BTech_Unit_I.pptx Ultrasonic sound ppt for students
BTech_Unit_I.pptx Ultrasonic sound ppt for students
Ultrasoundtherapy 150201220726-conversion-gate02 (1)
Ultrasoundtherapy 150201220726-conversion-gate02 (1)
Recently uploaded
在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
Thornton ESPP slides UK WW Network 4_6_24.pdf
ESPP presentation to EU Waste Water Network, 4th June 2024 “EU policies driving nutrient removal and recycling
and the revised UWWTD (Urban Waste Water Treatment Directive)”
8.Isolation of pure cultures and preservation of cultures.pdf
Isolation of pure culture, its various method.
Authoring a personal GPT for your research and practice: How we created the Q...
Thematic analysis in qualitative research is a time-consuming and systematic task, typically done using teams. Team members must ground their activities on common understandings of the major concepts underlying the thematic analysis, and define criteria for its development. However, conceptual misunderstandings, equivocations, and lack of adherence to criteria are challenges to the quality and speed of this process. Given the distributed and uncertain nature of this process, we wondered if the tasks in thematic analysis could be supported by readily available artificial intelligence chatbots. Our early efforts point to potential benefits: not just saving time in the coding process but better adherence to criteria and grounding, by increasing triangulation between humans and artificial intelligence. This tutorial will provide a description and demonstration of the process we followed, as two academic researchers, to develop a custom ChatGPT to assist with qualitative coding in the thematic data analysis process of immersive learning accounts in a survey of the academic literature: QUAL-E Immersive Learning Thematic Analysis Helper. In the hands-on time, participants will try out QUAL-E and develop their ideas for their own qualitative coding ChatGPT. Participants that have the paid ChatGPT Plus subscription can create a draft of their assistants. The organizers will provide course materials and slide deck that participants will be able to utilize to continue development of their custom GPT. The paid subscription to ChatGPT Plus is not required to participate in this workshop, just for trying out personal GPTs during it.
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
Shallowest Oil Discovery of Turkiye.pptx
The Petroleum System of the Çukurova Field - the Shallowest Oil Discovery of Türkiye, Adana
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
Although Artemia has been known to man for centuries, its use as a food for the culture of larval organisms apparently began only in the 1930s, when several investigators found that it made an excellent food for newly hatched fish larvae (Litvinenko et al., 2023). As aquaculture developed in the 1960s and ‘70s, the use of Artemia also became more widespread, due both to its convenience and to its nutritional value for larval organisms (Arenas-Pardo et al., 2024). The fact that Artemia dormant cysts can be stored for long periods in cans, and then used as an off-the-shelf food requiring only 24 h of incubation makes them the most convenient, least labor-intensive, live food available for aquaculture (Sorgeloos & Roubach, 2021). The nutritional value of Artemia, especially for marine organisms, is not constant, but varies both geographically and temporally. During the last decade, however, both the causes of Artemia nutritional variability and methods to improve poorquality Artemia have been identified (Loufi et al., 2024).
Brine shrimp (Artemia spp.) are used in marine aquaculture worldwide. Annually, more than 2,000 metric tons of dry cysts are used for cultivation of fish, crustacean, and shellfish larva. Brine shrimp are important to aquaculture because newly hatched brine shrimp nauplii (larvae) provide a food source for many fish fry (Mozanzadeh et al., 2021). Culture and harvesting of brine shrimp eggs represents another aspect of the aquaculture industry. Nauplii and metanauplii of Artemia, commonly known as brine shrimp, play a crucial role in aquaculture due to their nutritional value and suitability as live feed for many aquatic species, particularly in larval stages (Sorgeloos & Roubach, 2021).
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
Applied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
ESR spectroscopy in liquid food and beverages.pptx
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...Abdul Wali Khan University Mardan,kP,Pakistan
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skillsPhenomics assisted breeding in crop improvement
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
Recently uploaded (20)
8.Isolation of pure cultures and preservation of cultures.pdf
8.Isolation of pure cultures and preservation of cultures.pdf
Authoring a personal GPT for your research and practice: How we created the Q...
Authoring a personal GPT for your research and practice: How we created the Q...
Basics of crystallography, crystal systems, classes and different forms
Basics of crystallography, crystal systems, classes and different forms
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
ESR spectroscopy in liquid food and beverages.pptx
ESR spectroscopy in liquid food and beverages.pptx
Compexometric titration/Chelatorphy titration/chelating titration
Compexometric titration/Chelatorphy titration/chelating titration
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
1. Ultrasound Basics.pptx
- 1. The generation and use of ultrasound
- 2. Piezo-electric effect • Key Points • Ultrasound – is sound waves above the range of human hearing 20kHz. • Ultrasound – is produced by a piezo-electric transducer. • The transducer converts electrical energy into sound energy. • Piezo-electric transducers make use of piezo-electric crystals such as quartz.
- 3. • Quartz is made up of a large number of silicate units. • Which comprised of positively charged silicon ions and negatively charged oxygen ions.
- 4. • When a potential difference is applied to the crystal . The resulting electric field will cause forces on the positive and negative ions. • The ions are not held rigidly and so the ions will slightly displace. • Depending on the direction of the electric field, this displacement of the ions will either make the crystal become slightly thinner or slight thicker. + + + + - - - - The opposite surfaces of the crystal are silvered to act as electrodes.
- 5. • When an alternating voltage is applied to the crystal, the crystal will alternate between, becoming thinner and becoming thicker, with a frequency that matches the applied potential difference. • The amplitude of the vibrations is usually very small. However, if the frequency of the ac voltage matches the natural frequency of the crystal, then resonance occurs and the amplitude of vibrations will be much larger. • These vibrations can generate sound waves of high frequencies (greater than 20kHz) i.e. ultrasound. • The reverse also happens as well, i.e. if the crystal is subjected to an alternating force such as a ultrasound wave. Then this will cause the ions to displace slightly and as such will create a potential difference across the ends of the crystal.
- 6. Piezo-electric transducer/receiver When an alternating voltage is applied the crystal will produce an ultrasound wave When the crystal receives an ultrasound wave, the crystal will produce a potential difference. So the transmitter can also act as a receiver of ultrasound waves.