1
CIS105 Survey of Computer Information Systems
Final Project Rubric
Grading will be based upon the accuracy of your work, the appearance of your work, and how well
you apply the features you learned throughout the course. You are to complete and submit all
assessments for this project. Points will be granted in each of the categories listed below.
NOTE: You are only allowed to submit the Final Project once, so do your best work!
Category Description Possible
Points
MS Word
The document will be reviewed based on the successful completion of the
following:
• Use of Header and Footer
• Table of Contents
• Description of your experience completing the Final Project
• Formatting of text
• Correct file name
0-15
MS PowerPoint
The presentation will be reviewed based on the successful completion of the
following:
• Application of a theme
• Using of clipart
• Applying animation
• Adding slides
• Correct file name
0-15
MS Excel
The spreadsheet will be reviewed based on the successful completion of the
following:
• Calculating totals
• Applying formatting
• Computing data using formulas
• Computing data using functions
0-20
MS Access
The database will be reviewed based on the successful completion of the
following:
• Creating a report
• Querying data
• Customizing the look of a report
0-20
CIS105 At-Home Final Exam Part 1: Project – 70 points
1
MICROSOFT WORD (15 points)
You will create a business portfolio using the tools in MS Word to go with your Final
Exam for CIS105. You will demonstrate your ability to work with the features of MS
Word by creating a document, inserting a table of contents, and describing your
final exam.
a) Create a new document.
b) Create a Title Page with the following information centered on the page:
a. Your First and Last Name
b. Course and Section Number
c. Date
c) Add your MEID as a footer.
d) Insert a Table of Contents.
e) Create a section for each of the components of the Final Exam.
a. PowerPoint Presentation
b. Excel Spreadsheet
c. Access Database
f) For each section, write at least one paragraph describing the outcome of each
assignment on the Final Project.
a. What worked well?
b. What did you struggle with?
c. How long did it take you to complete the assignment?
g) Make sure that each of the three topics above are referenced in the Table of
Contents and set to automatically update.
h) Apply bold formatting to one item.
i) Apply italics to at least one item.
j) Apply Arial 12 point font to the entire document.
k) Save the file as Portfolio_YourName.docx.
CIS105 At-Home Final Exam Part 1: Project – 70 points
2
MICROSOFT POWERPOINT (15 points)
You will be creating a presentation for Buena Vista Apartments. You are presenting
an overview of the financial outlook for the company. The presentation will include
specific points you want t ...
Project Grading Rubric Course IT133 Unit 9 and 10 .docxwkyra78
Project Grading Rubric
Course: IT133 Unit: 9 and 10 Points: 140
Copyright Kaplan University
Final Course Project – Points = 140
Outcomes addressed in this activity:
Unit Outcomes:
Select appropriate applications for business or personal tasks
Explain a minimum of two optional methods for sharing a project with a target audience.
Course Outcome:
CO#5: Select appropriate software application(s) to address solutions within a specific discipline
Project Instructions & Rubric
Final Project: Creating your own business using Microsoft Applications
Scenario
You have an entrepreneurial spirit and decided to start your own business. You know that there is much to
do. You decide to use the Microsoft Software Applications (Word, Excel & PowerPoint) you have recently
learned about to create some documents you need to start your business.
You decide to use
MS Word to create a flyer to announce your grand opening,
MS PowerPoint to create a presentation you can present to a bank or other investors requesting a
loan
MS Excel to create your start up budget.
Deliverables
Zip the following three files to submit to the Final Project dropbox.
One MS Word document: Final_Flyer_Lastname.docx
One MS Excel workbook: Final_Budget_Lastname.xlsx
One PowerPoint presentation: Final_Presentation_Lastname.pptx
These three files should be placed in the Final project dropbox by the due date.
Project Details
Part 1: MS Word - Create a one page Opening Day Flyer in for your new business using MS Word. The
flyer must include at a minimum the specifications listed below.
a. Select a theme. Microsoft Office comes with variety of themes that you can choose to make a
more professional looking document. Your flyer should be in landscape orientation.
b. Include the following information in your flyer:
o Company Name
o Date and Time of Opening
o Location of Opening
o Description of business
o Events to take place
o Additional information you feel is required
c. Add Word Art. Some of the text must be added using Word Art.
d. Add a graphic. The graphic should be appropriate for your business. It could be a logo you
created or clip art.
Project Grading Rubric
Course: IT133 Unit: 9 and 10 Points: 140
Copyright Kaplan University
e. Add a table. Tables can be used to help organize your data on a page. You might use your table
to list the dates and time of the scheduled events.
f. Add a Footer. The footer should include your name, course and section number, and the date.
This information should be centered.
g. Ensure Flyer is well written. Information presented should be easily understood.
h. Ensure all choices add to the creation of a well designed document. It is important that
your flyer reflects knowledge of Microsoft Word features as covered in the course.
Part 2: MS Excel - Create a Start up Budget and first 6 months operati ...
Foundation and PathwaysCOS10020 Creating Web Application.docxhanneloremccaffery
Foundation and Pathways
COS10020 Creating Web Applications
Assignment 2
Semester 3, 2016
Purpose of Assignment:
An individual assignment, designed to familiarise in following the project life cycle in developing a website. It also provides an opportunity to practice again techniques and skills involved in designing webpages utilising validated HTML, and validated CSS using a standard text editor. Moreover, these webpages will contain input forms that will use Javascript to validate user data input before the form is submitted to the server for processing.
In this individual assignment you will develop a new Web form or enhance the Web form you developed in Assignment 1 by using PHP and storing server-side information in a MySQL database. This information will have been collected in your HTML Forms. It will involve the creation of simple MySQL tables to store, update and retrieve information from a Web site using MySQL commands.
Due Date: 8am Tuesday 10 January 2017
Submission as a single zip file, via the online submission system (Blackboard) http://blackboard.swin.edu.au/
Contribution to Final Assessment: 20%
Requirements and Specifications
The assignment requires you to develop a test website for a “Help Desk”. The director of the company is interested in developing a test website that allows the user to register a unique job number when first registering a technical problem. You are required to develop the front end (client) of the website. The director has asked a student, Mr Blog, who is taking up Web programming to develop the back end (server) of the website that will process the data input from the front end (client).
Task 1: Website Design
After several discussions with the director, it was agreed that 2 webpages will be developed. These are the Home Page and the Registration Page.
To keep the test website simple, the structure adopted is linear. Figure 2 illustrates the site map of the website.
The register.htm page:
1. Client side validation using Javascript.
The testreg.php page:
1. Redirects to the index page if registration is successful or outputs to successful registration feedback page with a link back to the index page.
2. Outputs an error page if server side validation fails. The outputted error page contains a link back to register.htm and index.html page.
Graphic Design
As part of the graphic design, it was agreed with the director that the main wireframe design for both webpages shown in Figure 3 be adopted.
These two structure elements will be styled by the CSS contained in common.css. You are free to design and add other structure elements to complete the index and the registration page.
Task 2: Construction and Content Development
Section One: HTML 5 Web Page
The two webpages must be developed using HTML5 to describe the content and structure. All pages must not contain any deprecated elements/attributes. The following HTML must be used in the assignment
· Index Page
· Anchor
· Registration pa ...
Assignment Overview Case 4 is in two parts Your Dreams Our Mission/tutorialou...davidwarner122
FOR MORE CLASSES VISIT
www.tutorialoutlet.com
Assignment Overview
Case 4 is in two parts. Part I delivers State and Sequence diagrams, and Part II is about user interface design and data storage. Assignment Expectations: Part 1
For the Case Assignment, submit a paper consisting of the following diagrams and report. Provide a 1- to
2-page written description explaining each of the diagrams developed.
Use a modeling tool to provide State diagrams for the following events
http://finishedexams.com/homework_text.php?cat=1799
Immediate access to solutions for ENTIRE COURSES, FINAL EXAMS and HOMEWORKS “RATED A+" - Without Registration!
Question 1Using Powerpoint, Word, Visio or any other graphical e.docxIRESH3
Question 1
Using Powerpoint, Word, Visio or any other graphical editor that allows you to create shapes and arrows, create a simple flow chart that provides the functionality for this pseudocode:
Write “Enter the price in dollars: “
Input Price
Write “Enter state sales tax(e.g. .06) : “
Input SalesTax
Set Price = Price + (Price * SalesTax)
Write “Price with Tax is “ + Price
Also, Provide a test case that you could use to validate your algorithm. (For example, what values for input would you use and what would the resulting output be for those input values)
Attach or embed your flow chart along with your test case as a response to this discussion topic.
Question 2
n everyday life we are all faced with many choices we must make on a daily basis.
1. Provide an Algorithm for your real world decision you must make on a daily basis that involves 2 or more choices
2. Provide your C code that implements your real world decision (be sure to utilize proper formatting and spacing to enhance your codes clarity, and applicable comments)
3. Explain your logic for the conditional statement you decided to use
4. Provide feedback to fellow student’s submission that involves converting their conditional statement to another conditional statement form
Work- homework
Homework 2
Instructions
In this homework, you will design a program to perform the following task:
Calculate the total price based on several key parts required to build a state-of-the-art gaming computer. The user will have the option of selecting different parts. For example, Windows 7, Windows 8 or Mac OS/X for Operating systems, 4 GB, 8 GB or 12 GB for RAM and 15”,17” or 22” Monitors.
There are 5 components of your submission including:
· Program Description- A detailed, clear description of the program you are building.
· Analysis- Demonstrates your thought process and steps used to analyze the problem. Be sure to include the required input and output and how you will obtain the required output from the given input? Also, include your variable names and definitions. Be sure to describe the necessary formulas and sample calculations that might be needed. You should talk about how you determined your computer part prices.
· Test plan - Prepare at least 3 sets of input data (Test data) along with their expected output for testing your program. Your test data can be presented in the form of a table as follows (note: feel free to adapt to your design)
· Flowchart – Provide a flowchart for your design. You can use Word, Powerpoint, Visio or any software you have available that will allow to draw shapes and connectors.
· Pseudocode- Provide pseudocode of your overall design that fulfills the requirements of the project
All of these components should be placed in word document for submission.
Additional details about the program you need to write:
1. You should research current prices of the computer parts on Internet sites such as amazon.com or newegg.com.
2. You can assume a computer will consi ...
Project Grading Rubric Course IT133 Unit 9 and 10 .docxwkyra78
Project Grading Rubric
Course: IT133 Unit: 9 and 10 Points: 140
Copyright Kaplan University
Final Course Project – Points = 140
Outcomes addressed in this activity:
Unit Outcomes:
Select appropriate applications for business or personal tasks
Explain a minimum of two optional methods for sharing a project with a target audience.
Course Outcome:
CO#5: Select appropriate software application(s) to address solutions within a specific discipline
Project Instructions & Rubric
Final Project: Creating your own business using Microsoft Applications
Scenario
You have an entrepreneurial spirit and decided to start your own business. You know that there is much to
do. You decide to use the Microsoft Software Applications (Word, Excel & PowerPoint) you have recently
learned about to create some documents you need to start your business.
You decide to use
MS Word to create a flyer to announce your grand opening,
MS PowerPoint to create a presentation you can present to a bank or other investors requesting a
loan
MS Excel to create your start up budget.
Deliverables
Zip the following three files to submit to the Final Project dropbox.
One MS Word document: Final_Flyer_Lastname.docx
One MS Excel workbook: Final_Budget_Lastname.xlsx
One PowerPoint presentation: Final_Presentation_Lastname.pptx
These three files should be placed in the Final project dropbox by the due date.
Project Details
Part 1: MS Word - Create a one page Opening Day Flyer in for your new business using MS Word. The
flyer must include at a minimum the specifications listed below.
a. Select a theme. Microsoft Office comes with variety of themes that you can choose to make a
more professional looking document. Your flyer should be in landscape orientation.
b. Include the following information in your flyer:
o Company Name
o Date and Time of Opening
o Location of Opening
o Description of business
o Events to take place
o Additional information you feel is required
c. Add Word Art. Some of the text must be added using Word Art.
d. Add a graphic. The graphic should be appropriate for your business. It could be a logo you
created or clip art.
Project Grading Rubric
Course: IT133 Unit: 9 and 10 Points: 140
Copyright Kaplan University
e. Add a table. Tables can be used to help organize your data on a page. You might use your table
to list the dates and time of the scheduled events.
f. Add a Footer. The footer should include your name, course and section number, and the date.
This information should be centered.
g. Ensure Flyer is well written. Information presented should be easily understood.
h. Ensure all choices add to the creation of a well designed document. It is important that
your flyer reflects knowledge of Microsoft Word features as covered in the course.
Part 2: MS Excel - Create a Start up Budget and first 6 months operati ...
Foundation and PathwaysCOS10020 Creating Web Application.docxhanneloremccaffery
Foundation and Pathways
COS10020 Creating Web Applications
Assignment 2
Semester 3, 2016
Purpose of Assignment:
An individual assignment, designed to familiarise in following the project life cycle in developing a website. It also provides an opportunity to practice again techniques and skills involved in designing webpages utilising validated HTML, and validated CSS using a standard text editor. Moreover, these webpages will contain input forms that will use Javascript to validate user data input before the form is submitted to the server for processing.
In this individual assignment you will develop a new Web form or enhance the Web form you developed in Assignment 1 by using PHP and storing server-side information in a MySQL database. This information will have been collected in your HTML Forms. It will involve the creation of simple MySQL tables to store, update and retrieve information from a Web site using MySQL commands.
Due Date: 8am Tuesday 10 January 2017
Submission as a single zip file, via the online submission system (Blackboard) http://blackboard.swin.edu.au/
Contribution to Final Assessment: 20%
Requirements and Specifications
The assignment requires you to develop a test website for a “Help Desk”. The director of the company is interested in developing a test website that allows the user to register a unique job number when first registering a technical problem. You are required to develop the front end (client) of the website. The director has asked a student, Mr Blog, who is taking up Web programming to develop the back end (server) of the website that will process the data input from the front end (client).
Task 1: Website Design
After several discussions with the director, it was agreed that 2 webpages will be developed. These are the Home Page and the Registration Page.
To keep the test website simple, the structure adopted is linear. Figure 2 illustrates the site map of the website.
The register.htm page:
1. Client side validation using Javascript.
The testreg.php page:
1. Redirects to the index page if registration is successful or outputs to successful registration feedback page with a link back to the index page.
2. Outputs an error page if server side validation fails. The outputted error page contains a link back to register.htm and index.html page.
Graphic Design
As part of the graphic design, it was agreed with the director that the main wireframe design for both webpages shown in Figure 3 be adopted.
These two structure elements will be styled by the CSS contained in common.css. You are free to design and add other structure elements to complete the index and the registration page.
Task 2: Construction and Content Development
Section One: HTML 5 Web Page
The two webpages must be developed using HTML5 to describe the content and structure. All pages must not contain any deprecated elements/attributes. The following HTML must be used in the assignment
· Index Page
· Anchor
· Registration pa ...
Assignment Overview Case 4 is in two parts Your Dreams Our Mission/tutorialou...davidwarner122
FOR MORE CLASSES VISIT
www.tutorialoutlet.com
Assignment Overview
Case 4 is in two parts. Part I delivers State and Sequence diagrams, and Part II is about user interface design and data storage. Assignment Expectations: Part 1
For the Case Assignment, submit a paper consisting of the following diagrams and report. Provide a 1- to
2-page written description explaining each of the diagrams developed.
Use a modeling tool to provide State diagrams for the following events
http://finishedexams.com/homework_text.php?cat=1799
Immediate access to solutions for ENTIRE COURSES, FINAL EXAMS and HOMEWORKS “RATED A+" - Without Registration!
Question 1Using Powerpoint, Word, Visio or any other graphical e.docxIRESH3
Question 1
Using Powerpoint, Word, Visio or any other graphical editor that allows you to create shapes and arrows, create a simple flow chart that provides the functionality for this pseudocode:
Write “Enter the price in dollars: “
Input Price
Write “Enter state sales tax(e.g. .06) : “
Input SalesTax
Set Price = Price + (Price * SalesTax)
Write “Price with Tax is “ + Price
Also, Provide a test case that you could use to validate your algorithm. (For example, what values for input would you use and what would the resulting output be for those input values)
Attach or embed your flow chart along with your test case as a response to this discussion topic.
Question 2
n everyday life we are all faced with many choices we must make on a daily basis.
1. Provide an Algorithm for your real world decision you must make on a daily basis that involves 2 or more choices
2. Provide your C code that implements your real world decision (be sure to utilize proper formatting and spacing to enhance your codes clarity, and applicable comments)
3. Explain your logic for the conditional statement you decided to use
4. Provide feedback to fellow student’s submission that involves converting their conditional statement to another conditional statement form
Work- homework
Homework 2
Instructions
In this homework, you will design a program to perform the following task:
Calculate the total price based on several key parts required to build a state-of-the-art gaming computer. The user will have the option of selecting different parts. For example, Windows 7, Windows 8 or Mac OS/X for Operating systems, 4 GB, 8 GB or 12 GB for RAM and 15”,17” or 22” Monitors.
There are 5 components of your submission including:
· Program Description- A detailed, clear description of the program you are building.
· Analysis- Demonstrates your thought process and steps used to analyze the problem. Be sure to include the required input and output and how you will obtain the required output from the given input? Also, include your variable names and definitions. Be sure to describe the necessary formulas and sample calculations that might be needed. You should talk about how you determined your computer part prices.
· Test plan - Prepare at least 3 sets of input data (Test data) along with their expected output for testing your program. Your test data can be presented in the form of a table as follows (note: feel free to adapt to your design)
· Flowchart – Provide a flowchart for your design. You can use Word, Powerpoint, Visio or any software you have available that will allow to draw shapes and connectors.
· Pseudocode- Provide pseudocode of your overall design that fulfills the requirements of the project
All of these components should be placed in word document for submission.
Additional details about the program you need to write:
1. You should research current prices of the computer parts on Internet sites such as amazon.com or newegg.com.
2. You can assume a computer will consi ...
Financial Modelling Course including an Excel Financial Model TemplateAurelien Domont, MBA
Go to www.slidebooks.com to Download and Reuse Now a Financial Modelling Course including an Excel Financial Model Template| Created By ex-Deloitte Consultants & Investment Bankers.
For more course tutorials visit
www.tutorialrank.com
Project Deliverable 1: Project Plan Inception Due Week 2 and worth 50 points This assignment consists of two
Student Lab Activity A. Lab # CIS CIS170A-A1B. Lab.docxemelyvalg9
Student Lab Activity
A. Lab # CIS CIS170A-A1
B. Lab 5s of 7: Modularization
C. Lab Overview – Scenario / Summary:
TCOs:
TCO: 7
Given a set of program specifications for a simple business problem utilizing a modular design, code and test a program that meets the specifications and employs best programming practices.
TCO: 8
Given a set of program specifications for a simple business problem, code and test a program that implements methods with parameter lists that are passed as supported by the chosen programming language
This lab will familiarize the student with the process of modularizing his or her code.
D. Deliverables:
Step
Deliverable
Points
5
Program Listing, Output, and Project Files
45
The Dropbox deliverables include the following.
1. Include a zipped file with all the files from your Visual Basic project (see directions in Doc Sharing on how to collect and zip files.)
2. Create a single MS Word document and include the following.
· For each lab, copy and paste your code directly into the MS Word file.
· Include screenshot(s) of your test data with test results. Enter enough data to demonstrate that all your code has been tested.
· Include another screenshot of the Visual Basic build output messages. Check your build output to make sure you have a successful build with (0) errors and (0) warnings. NOTE: The build output messages appear at the bottom of your window after you click the Build menu and before you click the Start Without Debugging option. Your build output messages provide a list of compiler warnings or errors and let you know whether your program compiled successfully.
· Include the Word document as part of the zipped project file.
3. Upload each part of the lab into its corresponding weekly Dropbox.
E. Lab Steps:
Preparation:
If you are using the Citrix remote lab, follow the login instructions located in the iLab tab in Course Home.
Locate the Visual Studio 2010 Icon on the desktop. Click to open.
Lab:
Step 1: Create a New Project
Create a new project in VB.NET. Name your project CIS170A_Lab05.
Practically every real-world professional program in existence today uses some type of modular design—this is just the way programs are designed and built. As a result, the primary objective of this lab is for you to understand how modular programs are designed and how data are passed between modules as the program is executing. This may be one of the most important lessons of this course, so it is critical that you focus on the modular design of the program; if you have any questions, post them to the Lab Forum threaded discussion.
In this project, we are going to use the Week 4 Hockey Player Statistics program that you created last week as a starting point and make a few minor changes in the program requirements. What you will do is take the existing project and with only slight modifications to the form design you will modularize the design of the code and then add a few new requirements. As you .
CIS 498 Imagine Your Future/newtonhelp.com bellflower48
For more course tutorials visit
www.newtonhelp.com
Project Deliverable 1: Project Plan Inception Due Week 2 and worth 50 points This assignment consists of two (2) sections: a project introduction and a Gantt chart or project plan.You must submit both sections as separate files for the completion of this assignment. Label each .....
For more course tutorials visit
www.newtonhelp.com
Project Deliverable 1: Project Plan Inception Due Week 2 and worth 50 points This assignment consists of two (2) sections: a project introduction and a Gantt chart or project plan.You must submit both sections as separate files for the completion of this assignment. Label each .....
Cis 489 final project project plan this assignmentAnakinzs
FOR MORE CLASSES VISIT
tutorialoutletdotcom
Final Project: Project Plan
Due Week 10 and worth 300 points
This assignment consists of three (3) sections: a written project plan, a revised Gantt chart or project plan, and a project plan PowerPoint presentation. You must submit the three (3) sections as separate files for the completion of this assignment. Label each file name according to the section of the assignment for which it is written. Additionally, you may create and / or assume all necessary assumptions needed for the completion of this assignment.
1 Question Information refinement means taking the system requi.docxmercysuttle
1
Question: Information refinement means taking the system requirements you find during requirements determination and ordering them into tables, diagrams, and other formats that make them easier to translate into technical system specifications.
A
True
B
False
2
Question: Agile Methodologies focus on the roles that people perform.
A
True
B
False
3
Question: In the ____, like that shown in the accompanying figure, the result of each phase, which is called a deliverable or end product, flows sequentially into the next phase in the SDLC.
A
Interactive model
B
Requirements model
C
Waterfall model
D
Object model
4
Question: The goal of operational feasibility is to understand the degree to which a proposed system will likely solve the business problems or take advantage of opportunities.
A
True
B
False
5
Question: Which of the following focuses on the frequent production of working versions of a system that have a subset of the total number of required features?
A
Use-case modeling
B
Limited production
C
Structured analysis
D
Structured programming
E
Iterative development
6
Question: Component focusing allows the systems analyst to break a system into small, manageable, and understandable subsystems.
A
True
B
False
7
Question: Greater user involvement in the system development process usually results in ____.
A
Poorer communication
B
More satisfied users
C
Slower development times
D
Both b and c
8
Question: Agile approaches work best when the system being developed operates in a stable environment.
A
True
B
False
9
Question: Dependence of one part of the system on one or more other system parts best describes
A
Interrelated components
B
Component
C
Dependency
D
Cohesion
E
Boundary
10
Question: A systems development technique is the series of steps used to mark the phases of development for an information system.
A
True
B
False
11
Question: Analyzing an organization's activities to determine where value is added to products and/or services and the costs incurred best describes
A
Affinity clustering
B
Value chain analysis
C
Resource availability
D
Business process reengineering
E
Technical difficulty
12
Question: A ____ path includes all tasks that are vital to the project schedule.
A
Vital
B
Baseline
C
Critical
D
Foundational
13
Question: Referencing enterprise solutions, the difference between the modules and traditional approaches is that the modules are integrated to focus on the business functional areas, rather than on business processes.
A
True
B
False
14
Question: The document sent to vendors asking them to propose hardware and software that will meet the requirements of your new system is called a
A
Requirements statement
B
Systems service request
C
Baseline Project Plan
D
Business case
E
Request for proposal (RFP)
15
Question: The first step in creating a WBS is to ____.
A
Mark all recognizable events
B
Determine ...
1 pageApaSourcesDiscuss how an organization’s marketing i.docxmercysuttle
1 page
Apa
Sources:
Discuss how an organization’s marketing information skills and resources contribute to its distinctive capabilities
Refereence
Cravens, D., & Piercy, N. (2013). Strategic marketing (10th ed.). New York: McGraw-Hill.
1 page
A
pa
S
ources:
Discuss how an organization’s marketing information skills and resources contribute to its distinctive
capabilitie
s
Refereence
Cravens, D., & Piercy, N. (2013). Strategic marketing (10th ed.). New York: McGraw
-
Hill
.
...
1
R1
20
V1
1Vac
0Vdc R2
100
V
C1
3m
ECE2280 Homework #1
1. (a) Find 𝑉!/𝑉!
(b) Find the Thevenin equivalent between terminals a-b.
Assume that Vg is the input signal. Find the Thevenin equivalent between terminals a-b.
2. Use the solution from Problem 1.
(a)If Vg=2V DC, what is the output at Vo?
(b)If Vg=5V DC, what is the output at Vo?
(c)If Vg=sin(10t), what is the output at Vo? Make a rough sketch of Vo and Vg.
(d) Note that this is an amplifier – the output is linearly related to the input by a gain value. Mathematically, this is
expressed as:
𝑉𝑜𝑢𝑡
𝑉𝑖𝑛
= (𝑔𝑎𝑖𝑛)
For this circuit, what variable is Vout and Vin. What is the numerical gain value?
3. Sketch the following waveforms. Identify the dc component of the waveform and the ac component of the
waveform.
a. Vs=10cos(2πt)
b. Vs=3V+3cos(3t)
c. Vs=5V±0.5V
4. Explain in your own words the procedural steps for plotting Bode Plots. (Note: I would prepare this question for use
during an exam)
Use the following figure for Problems 5-10:
5. Derive the transfer function 𝐻 𝑠 =
!!
!!
by hand.
6 and 7. Use Multisim to draw the circuit and print it out.
8. Simulate the circuit in Mulitsim to obtain the Bode Plots for the circuit.
9. Use MATLAB and the result of the hand derivation to obtain the Bode Plots.
10. Sketch the straight-line approximation of the magnitude Bode plot on the same graph as that printed out in Problem 9.
Note that Multisim plots the results over frequency and the derived transfer function uses 𝜔.
+ _
10Ω
8v1
+
_
a
b
2v2
40Ω
+
v1
-
5Ω 40Ω
20Ω
6Ω
10Ω _
v2
+
Sales and Disposal of Assets
After reviewing the scenario, explain the impact that the adjusted basis has on the calculation of tax liability, and propose at least two (2) tax-planning strategies for reducing, eliminating, or deferring the payment of capital gains taxes. Also, discuss other alternatives aimed at optimizing deductions or reducing taxes, such as selling the property to an unrelated third party which, in turn, allows losses to be deductible expenses.
Imagine that you are a tax consultant and a client needs your advice on how to reduce his tax liability on the sale of depreciable assets that have not been fully depreciated. The client has identified three (3) long-term depreciable assets and assumes that he will be able to pay capital gains taxes on the profit from their sale. It would be to your client’s advantage to treat a taxable gain as long-term capital gain to which lower rates apply and a loss is categorized as an ordinary loss, which can offset ordinary loss, which can offset ordinary income. Discuss the treatment of gains and losses for Section 1231 and Section 1245 of the Internal Revenue Code, and recommend at least three (3) tax-planning strategies that would assist the client in reducing his tax liability. Provide support for you
1
PSYC 499: Senior Capstone
The Impact of the Social on the Individual
Class Syllabus
Spring/2020
Class Cycle: Monday - Sunday
Instructor: Tara West
Contact Information: [email protected]
Office Hours: Mondays, 2pm – 3pm (or by appointment)
NOTE: When emailing, please include your name and class in the subject line
Course Materials:
• Lesko, W.A. (2012). Readings in social psychology: General, classic, and contemporary
selections (8th ed.). New York, NY: Pearson. ISBN: 978-0-205-17967. (Required)
• American Psychological Association (2019). Concise Rules of APA Style (7th ed.).
Washington, DC: American Psychological Association. ISBN: 978-1433832178.
(Recommended)
Type of Course: Required
Field of Study: Psychology
Credits: 3 credits, undergraduate
Pre-requisites:
Completion of all required courses (Level 2 and Level 3) and permission.
Course Description:
All students will complete a senior research project under the direction of a faculty mentor, with a
topic within the track in which the student has completed at least three courses. This capstone
project will build upon work done in previous courses, allowing students to apply methods of
scholarly and/or action research to specific psychological issues. Projects may be completed in
small research groups or individually.
Course Summary:
This capstone project will build upon work completed in previous courses, allowing students to
apply methods of scholarly and/or action research to the field of Social Psychology, specifically the
impact of the social world on individuals.
Course Goals:
The objectives for this course include: gaining a theoretical knowledge base about the interplay
between individuals and their environments, gaining first-hand experience with the many steps
involved with research, the interpretation of research, and the presentation of research, using APA
formatting. Likewise, you will increase your familiarity with reading (and finding) primary sources.
Although only a few of you may pursue careers as researchers, all of you are consumers of research.
As such, a major goal for this course is to develop your capacity to critically think about, evaluate,
and critique the scientific evidence that is often presented in journal articles, newspapers,
magazines, and on television.
2
Learning Objectives/ Outcomes:
o Students should be able to:
• Conduct a review of research in a specific area of Psychology.
• Understand the strengths and weaknesses of scientific research.
• Interpret and generalize appropriately from research results.
• Evaluate the appropriateness of conclusions derived from psychological research.
• Use the concepts, language, and major theories of the discipline to account for
psychological phenomena in the context of social psychology.
• Use reasoning to recognize, develop, defend, and criticize arguments.
• Articulate how psycholo ...
1 Politicking is less likely in organizations that have· adecl.docxmercysuttle
1 Politicking is less likely in organizations that have
·
adeclining resources
·
high role ambiguity
·
clear performance appraisal systems
·
democratic decision making
2 In convergent periods, the role of executive management is to
·
develop new strategies for the problems at hand
·
shift middle managers to promote new views
·
reemphasize the mission and core values
·
challenge middle managers to reinvent their departments
3 Periods of convergence are those in which an organization
·
is in turmoil
·
seeks to improve its situation with relatively minor changes
·
must downsize to conserve resources
·
employs new strategies to advance the organization
4 Transformational change in an organization
·
is always necessary to some degree
·
is best delivered by a top-down plan
·
has no defined formula
·
is best delivered by a bottom-up plan
5 A person likely to participate in political behavior
·
believes he or she has little influence
·
has a desire for power
·
is a social nonconformist
·
is insensitive to social cues
6 To keep a strategy in focus, effective managers employ
·
rigid implementation
·
piecemeal implementation
·
simple goals
·
central themes
7 An influence tactic that relies on rank and enforcement of group goals is
·
legitimacy
·
coalitions
·
pressure
·
personal appeals
8 During organizational change, employee–management interfaces such as workshops and retreats
·
initiate
·
distract the participants from the real issues
·
help employees overcome downsizing issues
·
solve communication problems relatively short-term periods of high-energy action
9 Buck passing and scapegoating when politics is seen as a threat are forms of
·
defensive behaviors
·
offensive behaviors
·
suppression
·
aggression
10 A primary goal of politics in the workplace is to
·
exclude undesirable peers
·
form alliances
·
promote organizational goals
·
secure limited resources
11 Political behavior in the workplace
·
works only in an upward or lateral influence direction
·
attempts to influence decision making
·
is unlikely in a well-run organization
·
works only in a lateral influence direction
12 Impression management sends _____ messages that may be _____ under other circumstances.
·
false, true
·
ethical, unethical
·
true, false
·
convincing, unconvincing
13 The formulation and implementation of a strategy
·
are separate and sequential processes
·
must be completely defined before action is taken
·
are ongoing events within an organization
·
follow strict, unalterable guidelines
14 Surveys of seasoned managers reveal they believe politics in the workplace is
·
always unethical
·
part of some job requirements
·
a major part of organizational life
·
ineffective
15 With downward influence, power tactics preferred by U.S. managers include
·
personal appeals
·
inspirational appeals
·
coalitions
·
influence
16 Hard power tactics best influence those with which following characteristic?
·
High se ...
1 page2 sourcesReflect on the important performance management.docxmercysuttle
1 page
2 sources
Reflect on the important performance management theories and practices covered during the past six weeks. Describe one key point that you will apply to the work environment immediately. Highlight the specific course learning outcome(s) that relate(s) to this important takeaway. Also, mention the specific reading materials and/or theories that you found to be most applicable.
Required Text
Pulakos, E.D. (2009). Performance management: A new approach for driving business results. (1st ed.). West Sussex, United Kingdom: Wiley-Blackwell. ISBN: 9781405177610.
Chapter 9: Conclusion
Required References
de Leeuw, S., van den Berg, P (2011). Improving operational performance by influencing shopfloor behavior via performance management practices. Journal of Operations Management, 29, 3, 224-233. (Retrieved from http://www.isihome.ir/freearticle/ISIHome.ir-21006.pdf)
Fulmer, R.M., Stumpf, S.A. & Bleak, J. (2009). The strategic development of high potential leaders. Strategy & Leadership, 37(3), 17-22. (Retrieved from ProQuest).
Recommended References
Turnbull, H., Greenwood, R., Tworoger, L., & Golden, C. (2009). Diversity and inclusion in organizations: Developing an instrument for identification of skill deficiencies. Allied Academies International Conference. Academy of Organizational Culture, Communications and Conflict. Proceedings, 14(1), 28-33(Retrieved from ProQuest).
PLEASE HAVE THESE PARAGRAPH REWORDED IN YOUR OWN WORDS.
PLEASE DO NOT USE THE SAME WORDS AS IN THE PARAGRAPH.
· 1-According to chapter 8, a team is small number of people with similar skills who are committed to one ambition, performance goals, and pursuit for which they hold themselves accountable. In the other hand, a group is two or more people freely interacting who share norms and goals and have a common identity. The size of a group is limited by the potential for mutual interaction and mutual awareness. I was part of team during my military service, which I agree with the chapter that a team is more than just a group, because all my team members worked together towards a common goal and we all share responsibility for the team's success. The team I was part of was a 'fire team' that is a small military subunit of infantry designed to optimize bounding over watch, and fire and movement tactical within a hostile urban environment
·
· 2-At work, I am currently assigned to a group of customer service. This group or department consists of 12 employees, which all members have a shared knowledge of the group's objectives, but specific responsibilities are assigned to each of us. The purpose or objectives of our group is to troubleshoot technical problems, provide excellent customer support service, and address solutions to customers. The main factor of our group success is due to the manager in control of the group who also coordinate our individuals efforts. I would not change anything in my group, but I would add weekly meetings to see the end result ...
1 of 402.5 PointsUse Cramer’s Rule to solve the following syst.docxmercysuttle
1 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
x + 2y = 3
3x - 4y = 4
A. {(3, 1/5)}
B. {(5, 1/3)}
C. {(1, 1/2)}
D. {(2, 1/2)}
2 of 40
2.5 Points
Solve the following system of equations using matrices. Use Gaussian elimination with back substitution or Gauss-Jordan elimination.
x + y - z = -2
2x - y + z = 5
-x + 2y + 2z = 1
A. {(0, -1, -2)}
B. {(2, 0, 2)}
C. {(1, -1, 2)}
D. {(4, -1, 3)}
3 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
2x = 3y + 2
5x = 51 - 4y
A. {(8, 2)}
B. {(3, -4)}
C. {(2, 5)}
D. {(7, 4)}
4 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
4x - 5y = 17
2x + 3y = 3
A. {(3, -1)}
B. {(2, -1)}
C. {(3, -7)}
D. {(2, 0)}
5 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
4x - 5y - 6z = -1
x - 2y - 5z = -12
2x - y = 7
A. {(2, -3, 4)}
B. {(5, -7, 4)}
C. {(3, -3, 3)}
D. {(1, -3, 5)}
6 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
3x - 4y = 4
2x + 2y = 12
A. {(3, 1)}
B. {(4, 2)}
C. {(5, 1)}
D. {(2, 1)}
Reset Selection
7 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
x + y + z = 0
2x - y + z = -1
-x + 3y - z = -8
A. {(-1, -3, 7)}
B. {(-6, -2, 4)}
C. {(-5, -2, 7)}
D. {(-4, -1, 7)}
8 of 40
2.5 Points
Solve the following system of equations using matrices. Use Gaussian elimination with back substitution or Gauss-Jordan elimination.
3x1 + 5x2 - 8x3 + 5x4 = -8
x1 + 2x2 - 3x3 + x4 = -7
2x1 + 3x2 - 7x3 + 3x4 = -11
4x1 + 8x2 - 10x3+ 7x4 = -10
A. {(1, -5, 3, 4)}
B. {(2, -1, 3, 5)}
C. {(1, 2, 3, 3)}
D. {(2, -2, 3, 4)}
9 of 40
2.5 Points
Solve the following system of equations using matrices. Use Gaussian elimination with back substitution or Gauss-Jordan elimination.
x + y + z = 4
x - y - z = 0
x - y + z = 2
A. {(3, 1, 0)}
B. {(2, 1, 1)}
C. {(4, 2, 1)}
D. {(2, 1, 0)}
10 of 40
2.5 Points
Solve the system using the inverse that is given for the coefficient matrix.
2x + 6y + 6z = 8
2x + 7y + 6z =10
2x + 7y + 7z = 9
The inverse of:
2
2
2
6
7
7
6
6
7
is
7/2
-1
0
0
1
-1
-3
0
1
A. {(1, 2, -1)}
B. {(2, 1, -1)}
C. {(1, 2, 0)}
D. {(1, 3, -1)}
Reset Selection
11 of 40
2.5 Points
Use Gaussian elimination to find the complete solution to the following system of equations, or show that none exists.
2w + x - y = 3
w - 3x + 2y = -4
3w + x - 3y + z = 1
w + 2x - 4y - z = -2
A. {(1, 3, 2, 1)}
B. {(1, 4, 3, -1)}
C. {(1, 5, 1, 1)}
D. {(-1, 2, -2, 1)}
12 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
x + y = 7
x - y = 3
A. {(7, 2)}
B. {(8, -2)}
C. {(5, 2)}
D. {(9, 3)}
13 of 40
2.5 Points
Use Gaussian elimination to find the complete solution to each system.
x1 + 4x2 + 3x3 - 6x4 = 5
x1 + 3x2 + x3 - 4x4 = 3
2x1 + 8x2 + 7x3 - 5x4 = 11
2x1 + 5x2 - 6x4 = 4
A. {(-47t + 4, 12t, 7t + 1, t)}
B. {(-37t + 2, 16t, -7t + 1, t)}
...
1 of 6 LAB 5 IMAGE FILTERING ECE180 Introduction to.docxmercysuttle
1 of 6
LAB 5: IMAGE FILTERING
ECE180: Introduction to Signal Processing
OVERVIEW
You have recently learned about the convolution sum that serves as the basis of the FIR filter difference equation. The filter
coefficient sequence {𝑏𝑘} – equivalent to the filter’s impulse response ℎ[𝑛] – may be viewed as a one-dimensional moving
window that slides over the input signal 𝑥[𝑛] to compute the output signal 𝑦[𝑛] at each time step. Extending the moving
window concept to a 2-D array that slides over an image pixel array provides a useful and popular way to filter an image.
In this lab project you will implement two types of moving-window image filters, one based on convolution and the other
based on the median value of the pixel grayscale values spanned by the window. You will also gain experience with the
built-in image convolution filter imfilter.
OUTLINE
1. Develop and test a 33 median filter
2. Develop and test a 33 convolution filter
3. Evaluate the median and convolution filters to reduce noise while preserving edges
4. Study the behavior of various 33 convolution filter kernels for smoothing, edge detection, and sharpening
5. Learn how to use imfilter to convolution-filter color images, and study the various mechanisms offered by
imfilter to deal with boundary effects
PREPARATION – TO BE COMPLETED BEFORE LAB
Study these tutorial videos:
1. Nested “for” loops -- http://youtu.be/q2xfz8mOuSI?t=1m8s (review this part)
2. Functions -- http://youtu.be/0zTmMIh6I8A (review as needed)
Ensure that you have added the ECE180 DFS folders to your MATLAB path, especially the “images” and “matlab” subfolders.
Follow along with the tutorial video http://youtu.be/MEqUd0dJNBA, if necessary.
LAB ACTIVITIES
1. Develop and test a 33 median filter function:
1.1. Implement the following algorithm as the function med3x3:
TIP: First implement and debug the algorithm as a script and then convert it to a function as a final step. Use any
of the smaller grayscale images from the ECE180 “images” folder as you develop the function, or use the test
image X described in the Step 1.2.
(a) Create the function template and save it to an .m file with the same name as the function,
(b) Accept a grayscale image x as the function input,
http://youtu.be/q2xfz8mOuSI?t=1m8s
http://youtu.be/0zTmMIh6I8A
http://youtu.be/MEqUd0dJNBA
2 of 6
(c) Copy x to the output image y and then initialize y(:) to zero; this technique creates y as the same size and
data type as x,
(d) Determine the number of image rows and columns (see size),
(e) Loop over all pixels in image x (subject to boundary limits):
Extract a 33 neighborhood (subarray) about the current pixel,
Flatten the 2-D array to a 1-D array,
Sort the 1-D array values (see sort),
Assign the middle value of the sorted array to the current output pixel, and
(f) Return the median-filtered image y.
1.2. Enter load lab_5_verify to load the
1 Objectives Genetically transform bacteria with for.docxmercysuttle
1
Objectives
Genetically transform bacteria with
foreign DNA and induce
expression of genes encoded on
DNA to produce novel
Isolate chromosomal DNA from
Introduction
In this portion of the lab, you will perform a
procedure known as genetic
transformation. that a gene is
a piece of DNA that provides the
instructions for making (codes for) a
protein. This gives an organism a
particular trait. Genetic transformation
literally means change caused by genes,
involves the insertion of a gene into an
organism in order to change the organism’s
trait. transformation is used in
many areas of biotechnology. In
agriculture, genes coding for traits such as
pest, or spoilage resistance can be
genetically transformed into plants. In
bioremediation, bacteria can genetically
transformed with genes enabling them to
digest oil spills. In medicine, diseases
caused defective genes are beginning
to be treated by gene therapy; that is, by
genetically transforming a person’s
cells with healthy copies of the defective
gene that causes the
You will use a procedure to transform
bacteria with a gene that codes for Green
Fluorescent (GFP). The real-life
source of this gene is the bioluminescent
jellyfish Aequorea victoria.
Fluorescent Protein causes the jellyfish to
fluoresce and glow in the dark.
LAB TOPIC 10: Nucleic Acids and Genetic Transformation
Following the procedure,
the bacteria express their newly acquired
jellyfish gene and produce the fluorescent
which causes them to glow a
brilliant green color under ultraviolet
In this activity, you will learn about the
process of moving genes from one organism
to another with aid of a plasmid. In
nature, bacteria can transfer plasmids back
and forth allowing them to share
beneficial genes. This natural mechanism
allows bacteria to adapt to new
environments. The occurrence of
bacterial resistance to is due to
the transmission of
Genetic transformation involves
insertion of some new DNA into the E.
cells. In addition to one large
bacteria often contain one or more
circular pieces of DNA called
Plasmid DNA usually contains genes for
than one trait. Scientists can use a
called genetic engineering to insert
coding for new traits into a plasmid.
In case, the pGLO plasmid carries the
GFP that codes for the green
fluorescent protein and a gene (bla) that
codes for a protein that gives the
resistance to an antibiotic. The genetically
engineered plasmid can then be used to
genetically bacteria to give them
this new
Figure 10.1 Bacterial cell undergoing genetic transformation with the pGLO
plasmid
Exercise 10.1
Bacterial Transformation
2
Pre-lab exercises:
Since scientific laboratory investigations
are designed to get information about a
question, our first might be to
formulate some questions for this
Can we genetically transform an organism?
Which organism is
1. To genetically tra ...
1 of 8
Student name: …………….
Student ID: …………….
The Effect of Social Media on the English Language
2 of 8
Table Of Content:
Abstract 3
Introduction 3
Literature review 3
Significance of Research 4
Research Question 4
Methodology 4
Ethical Considerations 4
Limitations of the study 4
Expected results 5
Conclusion 5
References 6
Appendix 7
3 of 8
Abstract:
Giving the popularity of social networking sites lately, it has made an effect on the English
language either in a positive way by adding new words to the dictionary a negative way by misus-
ing the grammar and using incorrect abbreviated words like turning “you’re” to “your’. In this re-
search proposal I would like to investigate what the effect of using social networks has on the Eng-
lish language and see if it was more positive than negative and vice versa. I will be making a survey
page to collect data on the way people use these sites. Furthermore, we will see if people know the
importance of using proper English and try to make social networking sites improve our way of us-
ing the English language.
Introduction:
Technology has changed rapidly in the past five years, we became more reliant on our smart phones
and it completely changed the way we communicate with each other in our everyday life, it made it
easier for us to interact with people across the world with a single touch through social networking
sites, such as Twitter, Facebook and YouTube. Technology is clearly having some impact on the
English language and the words we use. Recently we saw how some Internet words have made it to
the Oxford dictionary this proves the impact it made, for example the word “Tweet” which means
according to the dictionary: “a posting made on the social networking service Twitter”. However,
some people think that it is okay to misuse Grammar or word spelling on social networking sites,
for instance, using “your” instead of “You’re”. So do these sites make a positive or a negative im-
pact on the English language?
Literature review:
A research titled “5 Ways That Social Media Benefits Writing the English language” written by
Mallary Jean Tenore in 2013 mentioned some ways that social media benefits writing and language,
such as how it increases the awareness of mistakes, when people make grammatical or spelling mis-
takes people will point them out via these websites therefore we become more aware of our spelling
and grammar thus improving our language. She also talked about how it creates new words and
meaning, such as “googled”, “tweeted”, “Friended”. She said that it also spotlight short writings
meaning it valued short storytelling with Vine videos where you have just six seconds to give a
message and in twitter you only have 140 characters to use which forces you to make every word
count.
4 of 8
Another research called Social networkin ...
1
MATH 106 QUIZ 4 Due: by 11:59 PM, Sunday, September 22, 2013,
(take-home part) via the Assignment Folder
NAME: _______________________________
I have completed this assignment myself, working independently and not consulting anyone except the
instructor.
INSTRUCTIONS
The take-home part of Quiz 4 is worth 75 points. There are 10 problems (5 pages), some with multiple parts.
This quiz is open book and open notes. This means that you may refer to your textbook, notes, and online
classroom materials, but you must work independently and may not consult anyone (and confirm this with
your submission). You may take as much time as you wish, provided you turn in your quiz no later than
Sunday, September 22, 2013.
Show work/explanation where indicated. Answers without any work may earn little, if any, credit. You
may type or write your work in your copy of the quiz, or if you prefer, create a document containing your work.
Scanned work is acceptable also. In your document, be sure to include your name and the assertion of
independence of work.
General quiz tips and instructions for submitting work are posted in the Quizzes conference.
If you have any questions, please contact me via Private Message in WebTycho.
1. (4 pts) Determine how many six-character codes can be formed if the first, second, third, and
fourth characters are letters, the fifth character is a nonzero digit, the sixth character is an odd
digit, and repetition of letters and digits are allowed. (A digit is 0, 1, 2, .., or 9.) Show your
work . 1. ______
A. 720
B. 175,760
C. 790,920
D. 20,563,920
2. (4 pts) Suppose that a multiple choice exam has seven questions and each question has five
choices. In how many ways can the exam be completed? Show your work. 2. ______
A. 35
B. 4,096
C. 16,807
D. 78,125
2
3. (4 pts) Given the feasible region shown to
the right, find the values of x and y that
minimize the objective function 8x + 7y.
Show your Work. 3. _______
A. There is no minimum.
B. (x, y) = (6, 0)
C. (x, y) = (3, 2)
D. (x, y) = (1, 4)
E. (x, y) = (0, 7)
4. (4 pts) Six customers in a grocery store are lining up at the check-out. In how many different
orders can the customers line up? Show your work. 4. _______
A. 6
B. 36
C. 720
D. 46,656
5. (4 pts) A restaurant’s menu has six appetizers, four entrees, and five beverages. To order dinner, a
customer must choose one entrée and one beverage, and may choose one appetizer. (That is, a dinner
must include one entrée and one beverage, but not necessarily an appetizer. An appetizer is optional.)
How many different dinners can be ordered? Show your work. ...
More Related Content
Similar to 1 CIS105 Survey of Computer Information Systems Fi.docx
Financial Modelling Course including an Excel Financial Model TemplateAurelien Domont, MBA
Go to www.slidebooks.com to Download and Reuse Now a Financial Modelling Course including an Excel Financial Model Template| Created By ex-Deloitte Consultants & Investment Bankers.
For more course tutorials visit
www.tutorialrank.com
Project Deliverable 1: Project Plan Inception Due Week 2 and worth 50 points This assignment consists of two
Student Lab Activity A. Lab # CIS CIS170A-A1B. Lab.docxemelyvalg9
Student Lab Activity
A. Lab # CIS CIS170A-A1
B. Lab 5s of 7: Modularization
C. Lab Overview – Scenario / Summary:
TCOs:
TCO: 7
Given a set of program specifications for a simple business problem utilizing a modular design, code and test a program that meets the specifications and employs best programming practices.
TCO: 8
Given a set of program specifications for a simple business problem, code and test a program that implements methods with parameter lists that are passed as supported by the chosen programming language
This lab will familiarize the student with the process of modularizing his or her code.
D. Deliverables:
Step
Deliverable
Points
5
Program Listing, Output, and Project Files
45
The Dropbox deliverables include the following.
1. Include a zipped file with all the files from your Visual Basic project (see directions in Doc Sharing on how to collect and zip files.)
2. Create a single MS Word document and include the following.
· For each lab, copy and paste your code directly into the MS Word file.
· Include screenshot(s) of your test data with test results. Enter enough data to demonstrate that all your code has been tested.
· Include another screenshot of the Visual Basic build output messages. Check your build output to make sure you have a successful build with (0) errors and (0) warnings. NOTE: The build output messages appear at the bottom of your window after you click the Build menu and before you click the Start Without Debugging option. Your build output messages provide a list of compiler warnings or errors and let you know whether your program compiled successfully.
· Include the Word document as part of the zipped project file.
3. Upload each part of the lab into its corresponding weekly Dropbox.
E. Lab Steps:
Preparation:
If you are using the Citrix remote lab, follow the login instructions located in the iLab tab in Course Home.
Locate the Visual Studio 2010 Icon on the desktop. Click to open.
Lab:
Step 1: Create a New Project
Create a new project in VB.NET. Name your project CIS170A_Lab05.
Practically every real-world professional program in existence today uses some type of modular design—this is just the way programs are designed and built. As a result, the primary objective of this lab is for you to understand how modular programs are designed and how data are passed between modules as the program is executing. This may be one of the most important lessons of this course, so it is critical that you focus on the modular design of the program; if you have any questions, post them to the Lab Forum threaded discussion.
In this project, we are going to use the Week 4 Hockey Player Statistics program that you created last week as a starting point and make a few minor changes in the program requirements. What you will do is take the existing project and with only slight modifications to the form design you will modularize the design of the code and then add a few new requirements. As you .
CIS 498 Imagine Your Future/newtonhelp.com bellflower48
For more course tutorials visit
www.newtonhelp.com
Project Deliverable 1: Project Plan Inception Due Week 2 and worth 50 points This assignment consists of two (2) sections: a project introduction and a Gantt chart or project plan.You must submit both sections as separate files for the completion of this assignment. Label each .....
For more course tutorials visit
www.newtonhelp.com
Project Deliverable 1: Project Plan Inception Due Week 2 and worth 50 points This assignment consists of two (2) sections: a project introduction and a Gantt chart or project plan.You must submit both sections as separate files for the completion of this assignment. Label each .....
Cis 489 final project project plan this assignmentAnakinzs
FOR MORE CLASSES VISIT
tutorialoutletdotcom
Final Project: Project Plan
Due Week 10 and worth 300 points
This assignment consists of three (3) sections: a written project plan, a revised Gantt chart or project plan, and a project plan PowerPoint presentation. You must submit the three (3) sections as separate files for the completion of this assignment. Label each file name according to the section of the assignment for which it is written. Additionally, you may create and / or assume all necessary assumptions needed for the completion of this assignment.
Similar to 1 CIS105 Survey of Computer Information Systems Fi.docx (11)
1 Question Information refinement means taking the system requi.docxmercysuttle
1
Question: Information refinement means taking the system requirements you find during requirements determination and ordering them into tables, diagrams, and other formats that make them easier to translate into technical system specifications.
A
True
B
False
2
Question: Agile Methodologies focus on the roles that people perform.
A
True
B
False
3
Question: In the ____, like that shown in the accompanying figure, the result of each phase, which is called a deliverable or end product, flows sequentially into the next phase in the SDLC.
A
Interactive model
B
Requirements model
C
Waterfall model
D
Object model
4
Question: The goal of operational feasibility is to understand the degree to which a proposed system will likely solve the business problems or take advantage of opportunities.
A
True
B
False
5
Question: Which of the following focuses on the frequent production of working versions of a system that have a subset of the total number of required features?
A
Use-case modeling
B
Limited production
C
Structured analysis
D
Structured programming
E
Iterative development
6
Question: Component focusing allows the systems analyst to break a system into small, manageable, and understandable subsystems.
A
True
B
False
7
Question: Greater user involvement in the system development process usually results in ____.
A
Poorer communication
B
More satisfied users
C
Slower development times
D
Both b and c
8
Question: Agile approaches work best when the system being developed operates in a stable environment.
A
True
B
False
9
Question: Dependence of one part of the system on one or more other system parts best describes
A
Interrelated components
B
Component
C
Dependency
D
Cohesion
E
Boundary
10
Question: A systems development technique is the series of steps used to mark the phases of development for an information system.
A
True
B
False
11
Question: Analyzing an organization's activities to determine where value is added to products and/or services and the costs incurred best describes
A
Affinity clustering
B
Value chain analysis
C
Resource availability
D
Business process reengineering
E
Technical difficulty
12
Question: A ____ path includes all tasks that are vital to the project schedule.
A
Vital
B
Baseline
C
Critical
D
Foundational
13
Question: Referencing enterprise solutions, the difference between the modules and traditional approaches is that the modules are integrated to focus on the business functional areas, rather than on business processes.
A
True
B
False
14
Question: The document sent to vendors asking them to propose hardware and software that will meet the requirements of your new system is called a
A
Requirements statement
B
Systems service request
C
Baseline Project Plan
D
Business case
E
Request for proposal (RFP)
15
Question: The first step in creating a WBS is to ____.
A
Mark all recognizable events
B
Determine ...
1 pageApaSourcesDiscuss how an organization’s marketing i.docxmercysuttle
1 page
Apa
Sources:
Discuss how an organization’s marketing information skills and resources contribute to its distinctive capabilities
Refereence
Cravens, D., & Piercy, N. (2013). Strategic marketing (10th ed.). New York: McGraw-Hill.
1 page
A
pa
S
ources:
Discuss how an organization’s marketing information skills and resources contribute to its distinctive
capabilitie
s
Refereence
Cravens, D., & Piercy, N. (2013). Strategic marketing (10th ed.). New York: McGraw
-
Hill
.
...
1
R1
20
V1
1Vac
0Vdc R2
100
V
C1
3m
ECE2280 Homework #1
1. (a) Find 𝑉!/𝑉!
(b) Find the Thevenin equivalent between terminals a-b.
Assume that Vg is the input signal. Find the Thevenin equivalent between terminals a-b.
2. Use the solution from Problem 1.
(a)If Vg=2V DC, what is the output at Vo?
(b)If Vg=5V DC, what is the output at Vo?
(c)If Vg=sin(10t), what is the output at Vo? Make a rough sketch of Vo and Vg.
(d) Note that this is an amplifier – the output is linearly related to the input by a gain value. Mathematically, this is
expressed as:
𝑉𝑜𝑢𝑡
𝑉𝑖𝑛
= (𝑔𝑎𝑖𝑛)
For this circuit, what variable is Vout and Vin. What is the numerical gain value?
3. Sketch the following waveforms. Identify the dc component of the waveform and the ac component of the
waveform.
a. Vs=10cos(2πt)
b. Vs=3V+3cos(3t)
c. Vs=5V±0.5V
4. Explain in your own words the procedural steps for plotting Bode Plots. (Note: I would prepare this question for use
during an exam)
Use the following figure for Problems 5-10:
5. Derive the transfer function 𝐻 𝑠 =
!!
!!
by hand.
6 and 7. Use Multisim to draw the circuit and print it out.
8. Simulate the circuit in Mulitsim to obtain the Bode Plots for the circuit.
9. Use MATLAB and the result of the hand derivation to obtain the Bode Plots.
10. Sketch the straight-line approximation of the magnitude Bode plot on the same graph as that printed out in Problem 9.
Note that Multisim plots the results over frequency and the derived transfer function uses 𝜔.
+ _
10Ω
8v1
+
_
a
b
2v2
40Ω
+
v1
-
5Ω 40Ω
20Ω
6Ω
10Ω _
v2
+
Sales and Disposal of Assets
After reviewing the scenario, explain the impact that the adjusted basis has on the calculation of tax liability, and propose at least two (2) tax-planning strategies for reducing, eliminating, or deferring the payment of capital gains taxes. Also, discuss other alternatives aimed at optimizing deductions or reducing taxes, such as selling the property to an unrelated third party which, in turn, allows losses to be deductible expenses.
Imagine that you are a tax consultant and a client needs your advice on how to reduce his tax liability on the sale of depreciable assets that have not been fully depreciated. The client has identified three (3) long-term depreciable assets and assumes that he will be able to pay capital gains taxes on the profit from their sale. It would be to your client’s advantage to treat a taxable gain as long-term capital gain to which lower rates apply and a loss is categorized as an ordinary loss, which can offset ordinary loss, which can offset ordinary income. Discuss the treatment of gains and losses for Section 1231 and Section 1245 of the Internal Revenue Code, and recommend at least three (3) tax-planning strategies that would assist the client in reducing his tax liability. Provide support for you
1
PSYC 499: Senior Capstone
The Impact of the Social on the Individual
Class Syllabus
Spring/2020
Class Cycle: Monday - Sunday
Instructor: Tara West
Contact Information: [email protected]
Office Hours: Mondays, 2pm – 3pm (or by appointment)
NOTE: When emailing, please include your name and class in the subject line
Course Materials:
• Lesko, W.A. (2012). Readings in social psychology: General, classic, and contemporary
selections (8th ed.). New York, NY: Pearson. ISBN: 978-0-205-17967. (Required)
• American Psychological Association (2019). Concise Rules of APA Style (7th ed.).
Washington, DC: American Psychological Association. ISBN: 978-1433832178.
(Recommended)
Type of Course: Required
Field of Study: Psychology
Credits: 3 credits, undergraduate
Pre-requisites:
Completion of all required courses (Level 2 and Level 3) and permission.
Course Description:
All students will complete a senior research project under the direction of a faculty mentor, with a
topic within the track in which the student has completed at least three courses. This capstone
project will build upon work done in previous courses, allowing students to apply methods of
scholarly and/or action research to specific psychological issues. Projects may be completed in
small research groups or individually.
Course Summary:
This capstone project will build upon work completed in previous courses, allowing students to
apply methods of scholarly and/or action research to the field of Social Psychology, specifically the
impact of the social world on individuals.
Course Goals:
The objectives for this course include: gaining a theoretical knowledge base about the interplay
between individuals and their environments, gaining first-hand experience with the many steps
involved with research, the interpretation of research, and the presentation of research, using APA
formatting. Likewise, you will increase your familiarity with reading (and finding) primary sources.
Although only a few of you may pursue careers as researchers, all of you are consumers of research.
As such, a major goal for this course is to develop your capacity to critically think about, evaluate,
and critique the scientific evidence that is often presented in journal articles, newspapers,
magazines, and on television.
2
Learning Objectives/ Outcomes:
o Students should be able to:
• Conduct a review of research in a specific area of Psychology.
• Understand the strengths and weaknesses of scientific research.
• Interpret and generalize appropriately from research results.
• Evaluate the appropriateness of conclusions derived from psychological research.
• Use the concepts, language, and major theories of the discipline to account for
psychological phenomena in the context of social psychology.
• Use reasoning to recognize, develop, defend, and criticize arguments.
• Articulate how psycholo ...
1 Politicking is less likely in organizations that have· adecl.docxmercysuttle
1 Politicking is less likely in organizations that have
·
adeclining resources
·
high role ambiguity
·
clear performance appraisal systems
·
democratic decision making
2 In convergent periods, the role of executive management is to
·
develop new strategies for the problems at hand
·
shift middle managers to promote new views
·
reemphasize the mission and core values
·
challenge middle managers to reinvent their departments
3 Periods of convergence are those in which an organization
·
is in turmoil
·
seeks to improve its situation with relatively minor changes
·
must downsize to conserve resources
·
employs new strategies to advance the organization
4 Transformational change in an organization
·
is always necessary to some degree
·
is best delivered by a top-down plan
·
has no defined formula
·
is best delivered by a bottom-up plan
5 A person likely to participate in political behavior
·
believes he or she has little influence
·
has a desire for power
·
is a social nonconformist
·
is insensitive to social cues
6 To keep a strategy in focus, effective managers employ
·
rigid implementation
·
piecemeal implementation
·
simple goals
·
central themes
7 An influence tactic that relies on rank and enforcement of group goals is
·
legitimacy
·
coalitions
·
pressure
·
personal appeals
8 During organizational change, employee–management interfaces such as workshops and retreats
·
initiate
·
distract the participants from the real issues
·
help employees overcome downsizing issues
·
solve communication problems relatively short-term periods of high-energy action
9 Buck passing and scapegoating when politics is seen as a threat are forms of
·
defensive behaviors
·
offensive behaviors
·
suppression
·
aggression
10 A primary goal of politics in the workplace is to
·
exclude undesirable peers
·
form alliances
·
promote organizational goals
·
secure limited resources
11 Political behavior in the workplace
·
works only in an upward or lateral influence direction
·
attempts to influence decision making
·
is unlikely in a well-run organization
·
works only in a lateral influence direction
12 Impression management sends _____ messages that may be _____ under other circumstances.
·
false, true
·
ethical, unethical
·
true, false
·
convincing, unconvincing
13 The formulation and implementation of a strategy
·
are separate and sequential processes
·
must be completely defined before action is taken
·
are ongoing events within an organization
·
follow strict, unalterable guidelines
14 Surveys of seasoned managers reveal they believe politics in the workplace is
·
always unethical
·
part of some job requirements
·
a major part of organizational life
·
ineffective
15 With downward influence, power tactics preferred by U.S. managers include
·
personal appeals
·
inspirational appeals
·
coalitions
·
influence
16 Hard power tactics best influence those with which following characteristic?
·
High se ...
1 page2 sourcesReflect on the important performance management.docxmercysuttle
1 page
2 sources
Reflect on the important performance management theories and practices covered during the past six weeks. Describe one key point that you will apply to the work environment immediately. Highlight the specific course learning outcome(s) that relate(s) to this important takeaway. Also, mention the specific reading materials and/or theories that you found to be most applicable.
Required Text
Pulakos, E.D. (2009). Performance management: A new approach for driving business results. (1st ed.). West Sussex, United Kingdom: Wiley-Blackwell. ISBN: 9781405177610.
Chapter 9: Conclusion
Required References
de Leeuw, S., van den Berg, P (2011). Improving operational performance by influencing shopfloor behavior via performance management practices. Journal of Operations Management, 29, 3, 224-233. (Retrieved from http://www.isihome.ir/freearticle/ISIHome.ir-21006.pdf)
Fulmer, R.M., Stumpf, S.A. & Bleak, J. (2009). The strategic development of high potential leaders. Strategy & Leadership, 37(3), 17-22. (Retrieved from ProQuest).
Recommended References
Turnbull, H., Greenwood, R., Tworoger, L., & Golden, C. (2009). Diversity and inclusion in organizations: Developing an instrument for identification of skill deficiencies. Allied Academies International Conference. Academy of Organizational Culture, Communications and Conflict. Proceedings, 14(1), 28-33(Retrieved from ProQuest).
PLEASE HAVE THESE PARAGRAPH REWORDED IN YOUR OWN WORDS.
PLEASE DO NOT USE THE SAME WORDS AS IN THE PARAGRAPH.
· 1-According to chapter 8, a team is small number of people with similar skills who are committed to one ambition, performance goals, and pursuit for which they hold themselves accountable. In the other hand, a group is two or more people freely interacting who share norms and goals and have a common identity. The size of a group is limited by the potential for mutual interaction and mutual awareness. I was part of team during my military service, which I agree with the chapter that a team is more than just a group, because all my team members worked together towards a common goal and we all share responsibility for the team's success. The team I was part of was a 'fire team' that is a small military subunit of infantry designed to optimize bounding over watch, and fire and movement tactical within a hostile urban environment
·
· 2-At work, I am currently assigned to a group of customer service. This group or department consists of 12 employees, which all members have a shared knowledge of the group's objectives, but specific responsibilities are assigned to each of us. The purpose or objectives of our group is to troubleshoot technical problems, provide excellent customer support service, and address solutions to customers. The main factor of our group success is due to the manager in control of the group who also coordinate our individuals efforts. I would not change anything in my group, but I would add weekly meetings to see the end result ...
1 of 402.5 PointsUse Cramer’s Rule to solve the following syst.docxmercysuttle
1 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
x + 2y = 3
3x - 4y = 4
A. {(3, 1/5)}
B. {(5, 1/3)}
C. {(1, 1/2)}
D. {(2, 1/2)}
2 of 40
2.5 Points
Solve the following system of equations using matrices. Use Gaussian elimination with back substitution or Gauss-Jordan elimination.
x + y - z = -2
2x - y + z = 5
-x + 2y + 2z = 1
A. {(0, -1, -2)}
B. {(2, 0, 2)}
C. {(1, -1, 2)}
D. {(4, -1, 3)}
3 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
2x = 3y + 2
5x = 51 - 4y
A. {(8, 2)}
B. {(3, -4)}
C. {(2, 5)}
D. {(7, 4)}
4 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
4x - 5y = 17
2x + 3y = 3
A. {(3, -1)}
B. {(2, -1)}
C. {(3, -7)}
D. {(2, 0)}
5 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
4x - 5y - 6z = -1
x - 2y - 5z = -12
2x - y = 7
A. {(2, -3, 4)}
B. {(5, -7, 4)}
C. {(3, -3, 3)}
D. {(1, -3, 5)}
6 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
3x - 4y = 4
2x + 2y = 12
A. {(3, 1)}
B. {(4, 2)}
C. {(5, 1)}
D. {(2, 1)}
Reset Selection
7 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
x + y + z = 0
2x - y + z = -1
-x + 3y - z = -8
A. {(-1, -3, 7)}
B. {(-6, -2, 4)}
C. {(-5, -2, 7)}
D. {(-4, -1, 7)}
8 of 40
2.5 Points
Solve the following system of equations using matrices. Use Gaussian elimination with back substitution or Gauss-Jordan elimination.
3x1 + 5x2 - 8x3 + 5x4 = -8
x1 + 2x2 - 3x3 + x4 = -7
2x1 + 3x2 - 7x3 + 3x4 = -11
4x1 + 8x2 - 10x3+ 7x4 = -10
A. {(1, -5, 3, 4)}
B. {(2, -1, 3, 5)}
C. {(1, 2, 3, 3)}
D. {(2, -2, 3, 4)}
9 of 40
2.5 Points
Solve the following system of equations using matrices. Use Gaussian elimination with back substitution or Gauss-Jordan elimination.
x + y + z = 4
x - y - z = 0
x - y + z = 2
A. {(3, 1, 0)}
B. {(2, 1, 1)}
C. {(4, 2, 1)}
D. {(2, 1, 0)}
10 of 40
2.5 Points
Solve the system using the inverse that is given for the coefficient matrix.
2x + 6y + 6z = 8
2x + 7y + 6z =10
2x + 7y + 7z = 9
The inverse of:
2
2
2
6
7
7
6
6
7
is
7/2
-1
0
0
1
-1
-3
0
1
A. {(1, 2, -1)}
B. {(2, 1, -1)}
C. {(1, 2, 0)}
D. {(1, 3, -1)}
Reset Selection
11 of 40
2.5 Points
Use Gaussian elimination to find the complete solution to the following system of equations, or show that none exists.
2w + x - y = 3
w - 3x + 2y = -4
3w + x - 3y + z = 1
w + 2x - 4y - z = -2
A. {(1, 3, 2, 1)}
B. {(1, 4, 3, -1)}
C. {(1, 5, 1, 1)}
D. {(-1, 2, -2, 1)}
12 of 40
2.5 Points
Use Cramer’s Rule to solve the following system.
x + y = 7
x - y = 3
A. {(7, 2)}
B. {(8, -2)}
C. {(5, 2)}
D. {(9, 3)}
13 of 40
2.5 Points
Use Gaussian elimination to find the complete solution to each system.
x1 + 4x2 + 3x3 - 6x4 = 5
x1 + 3x2 + x3 - 4x4 = 3
2x1 + 8x2 + 7x3 - 5x4 = 11
2x1 + 5x2 - 6x4 = 4
A. {(-47t + 4, 12t, 7t + 1, t)}
B. {(-37t + 2, 16t, -7t + 1, t)}
...
1 of 6 LAB 5 IMAGE FILTERING ECE180 Introduction to.docxmercysuttle
1 of 6
LAB 5: IMAGE FILTERING
ECE180: Introduction to Signal Processing
OVERVIEW
You have recently learned about the convolution sum that serves as the basis of the FIR filter difference equation. The filter
coefficient sequence {𝑏𝑘} – equivalent to the filter’s impulse response ℎ[𝑛] – may be viewed as a one-dimensional moving
window that slides over the input signal 𝑥[𝑛] to compute the output signal 𝑦[𝑛] at each time step. Extending the moving
window concept to a 2-D array that slides over an image pixel array provides a useful and popular way to filter an image.
In this lab project you will implement two types of moving-window image filters, one based on convolution and the other
based on the median value of the pixel grayscale values spanned by the window. You will also gain experience with the
built-in image convolution filter imfilter.
OUTLINE
1. Develop and test a 33 median filter
2. Develop and test a 33 convolution filter
3. Evaluate the median and convolution filters to reduce noise while preserving edges
4. Study the behavior of various 33 convolution filter kernels for smoothing, edge detection, and sharpening
5. Learn how to use imfilter to convolution-filter color images, and study the various mechanisms offered by
imfilter to deal with boundary effects
PREPARATION – TO BE COMPLETED BEFORE LAB
Study these tutorial videos:
1. Nested “for” loops -- http://youtu.be/q2xfz8mOuSI?t=1m8s (review this part)
2. Functions -- http://youtu.be/0zTmMIh6I8A (review as needed)
Ensure that you have added the ECE180 DFS folders to your MATLAB path, especially the “images” and “matlab” subfolders.
Follow along with the tutorial video http://youtu.be/MEqUd0dJNBA, if necessary.
LAB ACTIVITIES
1. Develop and test a 33 median filter function:
1.1. Implement the following algorithm as the function med3x3:
TIP: First implement and debug the algorithm as a script and then convert it to a function as a final step. Use any
of the smaller grayscale images from the ECE180 “images” folder as you develop the function, or use the test
image X described in the Step 1.2.
(a) Create the function template and save it to an .m file with the same name as the function,
(b) Accept a grayscale image x as the function input,
http://youtu.be/q2xfz8mOuSI?t=1m8s
http://youtu.be/0zTmMIh6I8A
http://youtu.be/MEqUd0dJNBA
2 of 6
(c) Copy x to the output image y and then initialize y(:) to zero; this technique creates y as the same size and
data type as x,
(d) Determine the number of image rows and columns (see size),
(e) Loop over all pixels in image x (subject to boundary limits):
Extract a 33 neighborhood (subarray) about the current pixel,
Flatten the 2-D array to a 1-D array,
Sort the 1-D array values (see sort),
Assign the middle value of the sorted array to the current output pixel, and
(f) Return the median-filtered image y.
1.2. Enter load lab_5_verify to load the
1 Objectives Genetically transform bacteria with for.docxmercysuttle
1
Objectives
Genetically transform bacteria with
foreign DNA and induce
expression of genes encoded on
DNA to produce novel
Isolate chromosomal DNA from
Introduction
In this portion of the lab, you will perform a
procedure known as genetic
transformation. that a gene is
a piece of DNA that provides the
instructions for making (codes for) a
protein. This gives an organism a
particular trait. Genetic transformation
literally means change caused by genes,
involves the insertion of a gene into an
organism in order to change the organism’s
trait. transformation is used in
many areas of biotechnology. In
agriculture, genes coding for traits such as
pest, or spoilage resistance can be
genetically transformed into plants. In
bioremediation, bacteria can genetically
transformed with genes enabling them to
digest oil spills. In medicine, diseases
caused defective genes are beginning
to be treated by gene therapy; that is, by
genetically transforming a person’s
cells with healthy copies of the defective
gene that causes the
You will use a procedure to transform
bacteria with a gene that codes for Green
Fluorescent (GFP). The real-life
source of this gene is the bioluminescent
jellyfish Aequorea victoria.
Fluorescent Protein causes the jellyfish to
fluoresce and glow in the dark.
LAB TOPIC 10: Nucleic Acids and Genetic Transformation
Following the procedure,
the bacteria express their newly acquired
jellyfish gene and produce the fluorescent
which causes them to glow a
brilliant green color under ultraviolet
In this activity, you will learn about the
process of moving genes from one organism
to another with aid of a plasmid. In
nature, bacteria can transfer plasmids back
and forth allowing them to share
beneficial genes. This natural mechanism
allows bacteria to adapt to new
environments. The occurrence of
bacterial resistance to is due to
the transmission of
Genetic transformation involves
insertion of some new DNA into the E.
cells. In addition to one large
bacteria often contain one or more
circular pieces of DNA called
Plasmid DNA usually contains genes for
than one trait. Scientists can use a
called genetic engineering to insert
coding for new traits into a plasmid.
In case, the pGLO plasmid carries the
GFP that codes for the green
fluorescent protein and a gene (bla) that
codes for a protein that gives the
resistance to an antibiotic. The genetically
engineered plasmid can then be used to
genetically bacteria to give them
this new
Figure 10.1 Bacterial cell undergoing genetic transformation with the pGLO
plasmid
Exercise 10.1
Bacterial Transformation
2
Pre-lab exercises:
Since scientific laboratory investigations
are designed to get information about a
question, our first might be to
formulate some questions for this
Can we genetically transform an organism?
Which organism is
1. To genetically tra ...
1 of 8
Student name: …………….
Student ID: …………….
The Effect of Social Media on the English Language
2 of 8
Table Of Content:
Abstract 3
Introduction 3
Literature review 3
Significance of Research 4
Research Question 4
Methodology 4
Ethical Considerations 4
Limitations of the study 4
Expected results 5
Conclusion 5
References 6
Appendix 7
3 of 8
Abstract:
Giving the popularity of social networking sites lately, it has made an effect on the English
language either in a positive way by adding new words to the dictionary a negative way by misus-
ing the grammar and using incorrect abbreviated words like turning “you’re” to “your’. In this re-
search proposal I would like to investigate what the effect of using social networks has on the Eng-
lish language and see if it was more positive than negative and vice versa. I will be making a survey
page to collect data on the way people use these sites. Furthermore, we will see if people know the
importance of using proper English and try to make social networking sites improve our way of us-
ing the English language.
Introduction:
Technology has changed rapidly in the past five years, we became more reliant on our smart phones
and it completely changed the way we communicate with each other in our everyday life, it made it
easier for us to interact with people across the world with a single touch through social networking
sites, such as Twitter, Facebook and YouTube. Technology is clearly having some impact on the
English language and the words we use. Recently we saw how some Internet words have made it to
the Oxford dictionary this proves the impact it made, for example the word “Tweet” which means
according to the dictionary: “a posting made on the social networking service Twitter”. However,
some people think that it is okay to misuse Grammar or word spelling on social networking sites,
for instance, using “your” instead of “You’re”. So do these sites make a positive or a negative im-
pact on the English language?
Literature review:
A research titled “5 Ways That Social Media Benefits Writing the English language” written by
Mallary Jean Tenore in 2013 mentioned some ways that social media benefits writing and language,
such as how it increases the awareness of mistakes, when people make grammatical or spelling mis-
takes people will point them out via these websites therefore we become more aware of our spelling
and grammar thus improving our language. She also talked about how it creates new words and
meaning, such as “googled”, “tweeted”, “Friended”. She said that it also spotlight short writings
meaning it valued short storytelling with Vine videos where you have just six seconds to give a
message and in twitter you only have 140 characters to use which forces you to make every word
count.
4 of 8
Another research called Social networkin ...
1
MATH 106 QUIZ 4 Due: by 11:59 PM, Sunday, September 22, 2013,
(take-home part) via the Assignment Folder
NAME: _______________________________
I have completed this assignment myself, working independently and not consulting anyone except the
instructor.
INSTRUCTIONS
The take-home part of Quiz 4 is worth 75 points. There are 10 problems (5 pages), some with multiple parts.
This quiz is open book and open notes. This means that you may refer to your textbook, notes, and online
classroom materials, but you must work independently and may not consult anyone (and confirm this with
your submission). You may take as much time as you wish, provided you turn in your quiz no later than
Sunday, September 22, 2013.
Show work/explanation where indicated. Answers without any work may earn little, if any, credit. You
may type or write your work in your copy of the quiz, or if you prefer, create a document containing your work.
Scanned work is acceptable also. In your document, be sure to include your name and the assertion of
independence of work.
General quiz tips and instructions for submitting work are posted in the Quizzes conference.
If you have any questions, please contact me via Private Message in WebTycho.
1. (4 pts) Determine how many six-character codes can be formed if the first, second, third, and
fourth characters are letters, the fifth character is a nonzero digit, the sixth character is an odd
digit, and repetition of letters and digits are allowed. (A digit is 0, 1, 2, .., or 9.) Show your
work . 1. ______
A. 720
B. 175,760
C. 790,920
D. 20,563,920
2. (4 pts) Suppose that a multiple choice exam has seven questions and each question has five
choices. In how many ways can the exam be completed? Show your work. 2. ______
A. 35
B. 4,096
C. 16,807
D. 78,125
2
3. (4 pts) Given the feasible region shown to
the right, find the values of x and y that
minimize the objective function 8x + 7y.
Show your Work. 3. _______
A. There is no minimum.
B. (x, y) = (6, 0)
C. (x, y) = (3, 2)
D. (x, y) = (1, 4)
E. (x, y) = (0, 7)
4. (4 pts) Six customers in a grocery store are lining up at the check-out. In how many different
orders can the customers line up? Show your work. 4. _______
A. 6
B. 36
C. 720
D. 46,656
5. (4 pts) A restaurant’s menu has six appetizers, four entrees, and five beverages. To order dinner, a
customer must choose one entrée and one beverage, and may choose one appetizer. (That is, a dinner
must include one entrée and one beverage, but not necessarily an appetizer. An appetizer is optional.)
How many different dinners can be ordered? Show your work. ...
1 MN6003 Levis Strauss Case Adapted from Does Levi St.docxmercysuttle
1
MN6003 Levis Strauss Case:
Adapted from: “Does Levi Strauss still fit
America?” by Caroline Fairchild October 6, 2014,
Fortune Magazine and “Levi Strauss - The Boss
and the yogi” Jul 12th 2014 from the Economist
It used to be the only name in denim. Today the
161-year-old family owned company is just one
name among hundreds. Can anyone bring the
blue jeans pioneer back to its old glory? Enter
Chip Bergh—a former P&G brand whiz who once
made razorblades cool. Chip Bergh is not an
“apparel guy,” he says, while walking through
Levi’s Stadium in Santa Clara, California, the new
home of the San Francisco 49ers. Levi’s 20-year,
$220 million investment in the naming rights for
the 49ers stadium is part of a larger push to tap
into the nostalgia Bergh believes everyone has
for the brand. Despite the setting, Bergh isn’t
really a “sports guy” either. He is much more of a
company man. “I still bleed Procter & Gamble
blue,” he says about his former employer.
A crowd full of fans wearing your clothing is the
fantasy of anyone heading an apparel company.
But at Levi—the largest jeans company in the
world and the undisputed founder of the
category—the fantasy has been far from reality
for a long time. The creator of the 501 has
struggled to keep its brand relevant for what
Bergh calls Levi’s “Lost Generation.” For 120
years the term “Levi’s” was synonymous with
“blue jeans.” Then came the turn of the 21st
century, when a fashion explosion in denim
suddenly gave shoppers a range of high-end
choices—including brands like 7 For All Mankind
(founded in 2000) and True Religion (2002),
whose labels sounded more like cults than pants.
At the same time, lower-end rivals that had been
kicking around for a while (Lee and Wrangler)
began nibbling away at market share and
consumers defected to cheaper jeans, sold by
“fast-fashion” retailers like Zara and H&M. Levi
got lost in the middle. With $7.1 billion in 1996
sales, the company used to be bigger than Nike.
By 2003, Levi’s revenues had bell-bottomed out
to $4.2 billion. Over the next decade, sales rose
only barely as the company failed to translate
affection for the brand into actual purchases.
Levi’s design team was late to key trends, like
colored denim for women and more tailored jeans
for men. Once in the top quintile of
the Fortune 500, Levi dropped off the list in 2012.
That kind of decline would be a challenge for any
new CEO, yet Bergh, a 57-year-old vegan and
former U.S. Army captain, is bringing a discipline
to the company that had been missing for nearly
20 years. He has taken an axe to the company’s
inflated cost structure and is convinced that he
can make Levi grow again. While still relying
heavily on the classic pieces of clothing that are
the seam of the denim giant’s business (think the
button-fly jean, the white pocket tee, the trucker
jacket), Bergh is now investing i ...
1
NAME__________________
EXAM 1
Directions: Answer the following questions on the attached sheets of paper. Please adhere
to the following guidelines to reduce any suspicions of cheating:
1. KEEP YOUR EYES ON YOUR OWN EXAM AT ALL TIMES.
2. KEEP YOUR ANSWERS COVERED AT ALL TIMES.
3. Do not communicate with any other student during the exam.
4. Do not use any unauthorized prepared material during the exam.
5. Only acceptable calculators may be used on the exams.
6. Do not leave the room at any time before handing in your exam.
7. SHOW ALL OF YOUR WORK (answers may not be accepted without work
shown)
EQUATIONS
if
xxx
t
x
v
x
dt
dx
v
x
t
v
a
x
x
dt
dv
a
x
x
tavv
xxx
0
2
00
2
1
tatvxx
xx
)(2
0
2
0
2
xxavv
xxx
tvvxx
xx
)(
2
1
00
tavv
0
2
00
2
1
tatvrr
g
v
h
2
sin
0
22
0
g
v
R 0
2
0
2sin
jAiAA
yx
ˆˆ
22
yx
AAA
x
y
A
A
1
tan
cosABBA
sinABBA
r
v
a
c
2
dt
vd
a
t
raaa rt ˆ
ˆ
v
r
T
2
amF
nf
kk
nf
ss
Earth: mR
E
6
1038.6 , kgm
E
24
1097.5
2
1. A stone is thrown straight up with a speed of 25.0 m/s from the top of a building 55.0 m
tall.
a. How far above the ground will the stone go?
b. How long until the stone hits the ground?
c. What is the speed of the stone just before it hits the ground?
d. If a ball is thrown downward from the top of the same building with a speed of
25.0 m/s, will its speed just before hitting the ground be greater than, less than, or
equal to the speed of the stone just before it hits the ground? Explain. (Hint:
What is the speed of the stone when it returns to the height it was thrown?)
3
2. A ball is thrown from the top of a building of height 40m at an angle of 20˚ above the
horizontal and with an initial speed of 15m/s. Use the assumptions of projectile motion
to answer the following questions.
a. How high above the ground will the ball travel?
b. What speed will the ball have at the maximum height?
c. What is the direction of the velocity of the ball at the maximum height?
d. How far has the ball traveled horizontally when it hits the ground?
e. What will be the speed of the ball when it hits the ground?
4
3. Consider the frictionless system below. The pulley is massless and frictionless, and the
string is massless. The mass of each block is ma = 2.0 kg, mb = 1.0 kg, mc = 2.0 kg, and
md = 1.0 kg.
a. What is the acceleration of the system?
b. What is the tension in the string between block a and block b?
c. What is the tension in the string between block b and block c?
d. What is the tension in the string between block c and block d?
e. If the system is initially at rest, how long will it take block d to fall 3.0 m?
5
4. Two equal mass ...
1
Name: Chem 9, Section:
Lab Partner: Experiment Date:
Synthetic Polymers and Plastics
Part A: Physical Characteristics
Find or choose one type of each of the following plastic polymers, and report the following
characteristics:
Plastic
number
Short Name
(HDPE,
LDPE, etc)
Clear
(yes or no)
Opaque
(yes or no)
Flexibility
(can be
bent?)
Durability
(hard or
soft)
Breakability
(can be
cracked?)
Recyclable
(yes or no)
1
2
3
4
5
6
7
Part B: Density Tests
Report for plastic samples in each liquid: sinks rapidly, sinks slowly, floats on top, floats below surface
Plastic
number
1:1 ethanol/water
density = 0.94 g/cm
3
Water
density = 1.0 g/cm
3
10% NaCl solution
density = 1.08 g/cm
3
1
2
3
4
5
6
Relative Plastic Densities:
Less than 0.94 g/cm
3
Less than 1.0 g/cm
3
Less than 1.08 g/cm
3
More than 1.08 g/cm
3
Ranking of densities:
(lowest) _______ _______ _______ _______ _______ _______ (highest)
2
Part C: Polymer Bouncy Balls
Polymer Ball composition Approximate height bounced Physical characteristics
Ball #1:
Ball #2
Ball #3
Questions
1. Which of the Big Six plastics was the most flexible?
2. Which of the Big Six plastics would be the best material for each of the following examples?
Use short names to identify each plastic (e.g. HDPE).
a replacement for a glass window ?
a take-out container for food?
a flexible, expandable bag for carrying items?
a lightweight bottle cap?
3. An unknown plastic floats in a 10% NaCl solution but sinks in water. What is the range of
possible density values this plastic may have? Suggest the composition of this plastic.
3
4. Why is it important to dislodge any adhering bubbles in the density tests?
5. PET plastic (number 1) is the most valuable waste plastic at the present time. Suggest a way
to separate it commercially from other waste plastics.
6. Sometimes plastic containers are made from two polymers and not just one. What would
happen to the water density test if HDPE and PVC were mixed?
7. Why are plastic recyclers very concerned about identifying the different polymers and not
mixing them together?
8. The figure below depicts polymerization of polystyrene (PS). Circle the original monomers
and determine how many monomers are present.
4
9. Polyvinylchloride (PVC) is composed of the vinyl chloride monomer. The monomer
structure and general reaction are shown at right.
Draw a polyvinyl chloride polymer composed of five
monomers arrange ...
1 pageapasources2Third Party LogisticsBriefly describe .docxmercysuttle
1 page
apa
sources:2
Third Party Logistics
Briefly describe the basic types of third party logistics (3PL) organizations.
• Identify some of the best practices that leading companies using 3PLs have embraced.
• What value-added considerations would you take into account when considering the use of a 3PL?
• Which 3PL would provide the most suitable service to your organization? (Forwarder and Warehousing are the ones my company use.)
• What 3PLs does your organization currently use? (My company uses a freight forwarder)
What other 3PLs could you recommend to your management? Domestic Transportation.
WAVfiles/behave.wav
WAVfiles/cat_meow_x.wav
WAVfiles/cow3.wav
WAVfiles/goat2.wav
WAVfiles/gold.wav
WAVfiles/imamog.wav
WAVfiles/reach.wav
WAVfiles/README.txt
Title Artist
===== ======
behave Austin Powers
cat_meow_x Kitty
cow3 Miss Cow
goat2 Goaty
gold Snowman
imamog Mog
reach Woody
rudolph Rudolph
theme Archie and Edith
warning_alien Robot
wizoz5 Munchkins
WAVfiles/rudolph.wav
WAVfiles/theme.wav
WAVfiles/warning_alien.wav
WAVfiles/wizoz5.wav
...
1 Pageapasources2Review the Food Environment Atlas maps for.docxmercysuttle
1 Page
apa
sources:2
Review the Food Environment Atlas maps for variables that seem to affect your selected state the most.
Select a state and variables you consider relevant to represent the food environment in you chosen state.
1) Include at least two food categories from the following list:
? ACCESS
? STORES
? RESTAURANTS
? ASSISTANCE
? INSECURITY
? PRICES_TAXES
? LOCAL
2) Include at least two health variables in each of the selected food categories. Find the name and descriptions of variables in the Food Environment Atlas Resources: Excel Data and Documentation Download.
Write a 200- to 300-word plan that includes
? your selected state (Texas);
? selected food categories and health variables; and
? reasons for selection. Are your variables expressed in numbers or percentages?
Optional: Discuss choices in discussion with classmates and instructor. Write a summary of your discussion to include with this assignment.
...
1 Lab 3 Newton’s Second Law of Motion Introducti.docxmercysuttle
1
Lab 3: Newton’s Second Law of Motion
Introduction
Newton’s Second law of motion can be summarized by the following equation:
Σ F = m a (1)
where Σ F represents a net force acting on an object, m is the mass of the object moving
under the influence of Σ F, and a is the acceleration of that object. The bold letters in
the equation represent vector quantities.
In this lab you will try to validate this law by applying Eq. 1 to the almost frictionless
motion of a car moving along a horizontal aluminum track when a constant force T
(tension in the string) acts upon it. This motion (to be exact the velocity of the moving
object) will be recorded automatically by a motion sensor. The experimental set up
for a car moving away from the motion sensor is depicted below.
If we consider the frictionless motion of the cart in the positive x-direction chosen in
the diagram, then Newton’s Second Law can be written for each of the objects as
follows:
T Ma (2)
and
– gT F ma (3)
From this system of equations we can get the acceleration of the system:
2
gF
a
m M
(4)
Because the motion of the car is not frictionless, to get better results it is necessary to
include the force of kinetic friction fk experienced by the moving car in the analysis.
When the cart is moving away from the motion detector (positive x-direction in the
diagram) Newton’s Second Law is written as follows for each of the moving objects
m and M:
1 1– kT f Ma (5)
and
1 1– gT F ma (6)
Since it is quite difficult to assess quantitatively the magnitude of kinetic friction
involved in our experiment we will solve the problem by putting the object in two
different situations in which the friction acts in opposite directions respectively while
the tension in the string remains the same.
When the cart M is forced to move towards the motion detector (negative x-direction
in the diagram), the corresponding Newton’s Second Law equations will change as
follows:
2 2kT f Ma (7)
and
2 2gT F ma (8)
Note that in equations 5, 6, 7, and 8 the direction of acceleration represented by vector
a has been chosen in the same direction as the direction of motion.
We are able to eliminate the force of kinetic friction on the final result, by calculating
the mean acceleration from these two runs:
1 2
2
ave
slope slope
a
(9)
Combing the equations (5) – (8) we derive the equation to calculate the value of
gravitational acceleration:
avea M mg
m
(10)
3
Equipment
Horizontal dynamics track with smart pulley and safety stopper on one end; collision
cart with reflector connected to a variable mass hanging over the pulley; motion
detector connected to the Science Workshop interface recording the velocity of the
moving cart.
Procedure:
a) Weigh the cart (M) and the small mass (m) hanger.
b) Open the experiment file “New ...
1 Marks 2 A person can be prosecuted for both an attempt and .docxmercysuttle
1
Marks: 2
A person can be prosecuted for both an attempt and the completed crime.
Choose one answer.
a. False
b. True
Question 2
Marks: 2
According to Hicks v. U.S.,150 U.S. 442 (1893)one can be held criminally liable by “merely speaking words of encouragement.”
Choose one answer.
a. True
b. False
Question 3
Marks: 2
According to MPC §1.07, conspirators in a completed crime may be punished for the conspiracy, as well as the completed crime.
Choose one answer.
a. True
b. False
Question 4
Marks: 2
According to your reading, in some states it is a more serious offense to break into a car and steal a tape player than it is to steal the entire car.
Choose one answer.
a. false
b. true
Question 5
Marks: 2
According to your reading, the charge of forgery includes each of the following elements except
Choose one answer.
a. the false making or altering
b. of a legally significant instrument
c. with intent to defraud
d. a court of law or financial institution
Question 6
Marks: 2
According to your reading, the legal term of art most often employed to distinguish murder from manslaughter is
Choose one answer.
a. causation
b. vicarious liability
c. burden of proof
d. malice aforethought
Question 7
Marks: 2
According to your reading, the Model Penal Code considers the solicitor to be as dangerous as the perpetrator of the completed crime.
Choose one answer.
a. false
b. true
Question 8
Marks: 2
According to your reading, the problems with corporate criminal liability include
Choose one answer.
a. Determining who to charge
b. determining punishment
c. the wording of criminal statutes
d. all of the above
Question 9
Marks: 2
Although they are similar, embezzlement differs from larceny in which of the following ways?
Choose one answer.
a. embezzlement requires asportation
b. the claim of right defense is generally not applicable to larceny
c. embezzlement does not require intent
d. none of the above
Question 10
Marks: 2
An aider and abettor or accessory before the fact must
Choose one answer.
a. be a principal of the crime
b. discourage the commission of the crime
c. solicit the commission of the crime
d. aid or encourage the commission of a crime
11
Marks: 2
An effective abandonment defense to aiding and abetting, or to accessory before the fact, will
Choose one answer.
a. vary with aid
b. depend on the type of solicitation made
c. all of the above
d. none of the above
Question 12
Marks: 2
Assault and battery are
Choose one answer.
a. civil torts, not crimes
b. handled the same in all jurisdictions
c. handled the same in civil and criminal proceedings
d. handled differently from jurisdiction to jurisdiction
Question 13
Marks: 2
At Common Law, which of the following elements is not accurate regarding the crime of Burglary?
Choose one answer.
a. Trespassory breaking and entering
b. Of the dwelling of anoth ...
1 Marks 1 Post Traumatic Stress Disorder (PTSD)Choose one .docxmercysuttle
1
Marks: 1
Post Traumatic Stress Disorder (PTSD):
Choose one answer.
a. is exclusive to Vietnam Veterans
b. is a psychological illness characterized by panic attacks, nightmares, depression, guilt and flashbacks
c. can be caused by any highly emotional event
d. both b and c above
Question 2
Marks: 1
Which of the following is not a role of a crisis interventionist?
Choose one answer.
a. To encourage and allow the client to "make the decisions".
b. To tell the client exactly what he/she should do, when he/she should do it, and how he/she should do it.
c. To enable the client to become aware of possible solutions to the crisis.
d. To allow the client to vent emotions.
Question 3
Marks: 1
A victim's pain:
Choose one answer.
a. may often last weeks, months, or even years after the incident
b. usually goes away after the court process is completed
c. usually goes away after an advocate explains the legal system
d. usually goes away after receipt of financial reimbursement for personal and property losses
Question 4
Marks: 1
Which of the following does NOT create law:
Choose one answer.
a. U.S. Congress
b. National Association for the Advancement of Colored People
c. U.S. Environmental Protection Agency
d. Colorado Supreme Court
Question 5
Marks: 1
Which of the following is not considered to be a responsibility of a victim advocate?
Choose one answer.
a. To consider the job a serious commitment.
b. To litigate the victim's case.
c. To maintain confidentiality in all issues pertaining to clients.
d. To keep informed on relevant issues through ongoing training.
Question 6
Marks: 1
Which of the following is a goal of perpetrator counseling?
Choose one answer.
a. Counseling done in hopes to keep perpetrators from committing further crimes.
b. To encourage the perpetrator to commit more crimes
c. To meet the urgent physical and emotional needs of a victim.
d. To provide support and reassurance at the scene of the crime or shortly thereafter.
Question 7
Marks: 1
What court-related service involves monitoring court activity to make sure victims are being treated fairly by judges and attorneys?
Choose one answer.
a. Witness Alert
b. Court Watch
c. Restitution Assistance
d. Legislative Advocacy
Question 8
Marks: 1
Which of the following puts the statutes in the correct chronological order (earliest to most recent) by their date of enactment?
Choose one answer.
a. Violence Against Women Act; Victims of Crime Act; Victims & Witness Protection Act; Victims Rights & Restitution Act
b. The Victims of Crime Act; Victims Right & Restitution Act; Violence Against Women Act; Victims & Witness Protection Act
c. The Victim & Witness Protection Act; Violence Against Women Act; The Victims of Crime Act; Victims Rights & Restitution Act
d. The Victim & Witness Protection Act; The Victims of Crime Act; Victims Rights & Restitution Act; Violence Against Wome ...
1 List of Acceptable Primary Resources for the Week 3 .docxmercysuttle
1
List of Acceptable Primary Resources for the Week 3 and Week 5
Assignments
These are the primary resources that you can cite when explaining a moral theory in order to fulfill the
relevant portion of the resources requirement. Readings included in the “Required Readings” list are
indicated with a *.
Utilitarianism:
*Mill, J. S. Utilitarianism, in the original version in the textbook, or in the version by Jonathan
Bennett retrieved from www.earlymoderntexts.com.
Haines, W. (n.d.). Consequentialism. Internet Encyclopedia of Philosophy. Retrieved from
http://www.iep.utm.edu/conseque/
Singer, P. (2003). Voluntary euthanasia: A utilitarian perspective. Bioethics, 17(5/6), 526-541.
Retrieved from the EBSCOhost database.
Deontology:
* Kant, I. (2008). Groundwork for the metaphysic of morals. In J. Bennett (Ed. & Trans.), Early
Modern Philosophy. Retrieved from http://www.earlymoderntexts.com/pdfs/kant1785.pdf
(Original work published in 1785).
Virtue Ethics:
* Aristotle. (350 B.C.E.). Nicomachean ethics (W. D. Ross, Trans.). Retrieved from
http://classics.mit.edu/Aristotle/nicomachaen.html
Annas, J. (2006). Virtue ethics. In D. Copp (Ed.), The Oxford Handbook of Ethical Theory (pp. 515–
36). Oxford: Oxford University Press. Retrieved from
https://www.sesync.org/sites/default/files/resources/case_studies/10-kenyaecotourism-
handbook.pdf
Hursthouse, R. (2012). Virtue ethics. In E. Zalta (Ed.), The Stanford Encyclopedia of Philosophy.
Retrieved from http://plato.stanford.edu/entries/ethics-virtue/
MacIntyre, A. (1984). After virtue. Notre Dame, IN: University of Notre Dame Press. Chapters 14-15
are included in the Chapter 6 readings of the textbook.
Feminist/Care Ethics:
*Held, V. Feminist transformations of moral theory. Included in the Chapter 6 readings of the
textbook.
*Gilligan, C. (1982). In a different voice: Psychological theory and women’s development.
Cambridge, MA: Harvard University Press. Retrieved from
https://lms.manhattan.edu/pluginfile.php/26517/mod_resource/content/1/Gilligan%20In%20
a%20Different%20Voice.pdf
http://insite.bridgepoint.local/dept/ops/pni/Navigator Images/Ashford Logo New.jpg
http://www.earlymoderntexts.com/
http://www.iep.utm.edu/conseque/
https://www.sesync.org/sites/default/files/resources/case_studies/10-kenyaecotourism-handbook.pdf
http://plato.stanford.edu/entries/ethics-virtue/
https://lms.manhattan.edu/pluginfile.php/26517/mod_resource/content/1/Gilligan%20In%20a%20Different%20Voice.pdf
2
* Noddings, N. (2010). Maternal factor: Two paths to morality. Berkeley, CA: University of
California Press. Retrieved from the ebrary database.
http://insite.bridgepoint.local/dept/ops/pni/Navigator Images/Ashford Logo New.jpg
...
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
1 CIS105 Survey of Computer Information Systems Fi.docx
1. 1
CIS105 Survey of Computer Information Systems
Final Project Rubric
Grading will be based upon the accuracy of your work, the
appearance of your work, and how well
you apply the features you learned throughout the course. You
are to complete and submit all
assessments for this project. Points will be granted in each of
the categories listed below.
NOTE: You are only allowed to submit the Final Project once,
so do your best work!
Category Description Possible
Points
MS Word
The document will be reviewed based on the successful
completion of the
following:
• Use of Header and Footer
• Table of Contents
• Description of your experience completing the Final Project
• Formatting of text
• Correct file name
2. 0-15
MS PowerPoint
The presentation will be reviewed based on the successful
completion of the
following:
• Application of a theme
• Using of clipart
• Applying animation
• Adding slides
• Correct file name
0-15
MS Excel
The spreadsheet will be reviewed based on the successful
completion of the
following:
• Calculating totals
• Applying formatting
• Computing data using formulas
• Computing data using functions
0-20
3. MS Access
The database will be reviewed based on the successful
completion of the
following:
• Creating a report
• Querying data
• Customizing the look of a report
0-20
CIS105 At-Home Final Exam Part 1: Project – 70 points
1
MICROSOFT WORD (15 points)
You will create a business portfolio using the tools in MS Word
to go with your Final
Exam for CIS105. You will demonstrate your ability to work
with the features of MS
Word by creating a document, inserting a table of contents, and
describing your
final exam.
4. a) Create a new document.
b) Create a Title Page with the following information centered
on the page:
a. Your First and Last Name
b. Course and Section Number
c. Date
c) Add your MEID as a footer.
d) Insert a Table of Contents.
e) Create a section for each of the components of the Final
Exam.
a. PowerPoint Presentation
b. Excel Spreadsheet
c. Access Database
f) For each section, write at least one paragraph describing the
outcome of each
assignment on the Final Project.
a. What worked well?
5. b. What did you struggle with?
c. How long did it take you to complete the assignment?
g) Make sure that each of the three topics above are referenced
in the Table of
Contents and set to automatically update.
h) Apply bold formatting to one item.
i) Apply italics to at least one item.
j) Apply Arial 12 point font to the entire document.
k) Save the file as Portfolio_YourName.docx.
CIS105 At-Home Final Exam Part 1: Project – 70 points
2
MICROSOFT POWERPOINT (15 points)
You will be creating a presentation for Buena Vista Apartments.
You are presenting
an overview of the financial outlook for the company. The
presentation will include
specific points you want to remember to cover during the
6. meeting.
a) Create a new presentation.
b) Select the Aspect or Trek Theme.
c) Add a new slide with the title text “Buena Vista Apartments
– Business
Outlook” as right aligned.
d) Type the subtitle text as “by – Your Full Name & MEID” as
right aligned.
e) Modify title text and subtitle placeholders to accommodate
the text on the right
side of the slide.
f) Add a Slide with the title text as “Assessment” and the
following items:
a. Look at our current strengths
b. Isolate our current weaknesses
c. Define new opportunities
d. Discuss potential threats to business
7. g) Insert a business picture from the Clip Art Gallery and resize
to fit the left side
of the slide.
h) Add a slide for each of the following and include the bullet
list on each slide:
a. Growth Potential
i. Are sales going up or down?
ii. Are profits rising or declining?
iii. Is market share sustained or contracting?
iv. Is the turnover rate high or low?
b. Financial Options
i. Are there any potential investors?
ii. How much will be required for this year?
iii. How much will be needed for expansion?
8. CIS105 At-Home Final Exam Part 1: Project – 70 points
3
iv. Have we checked commercial banks?
c. Future Outlook
i. Is the business expanding or contracting?
ii. Are we at full capacity or less than capacity?
iii. Are there sufficient resources to match new clients?
iv. Has outsourcing been considered?
i) Add animation to the presentation
j) Save the file with the name Final Exam Presentation.pptx.
CIS105 At-Home Final Exam Part 1: Project – 70 points
4
9. MICROSOFT EXCEL (20 points)
Williams Auto Sales
You are a car salesperson for Williams Auto Sales. Your
manager requires you to
prepare a monthly sales report for him. This report will list all
car sales for the
month of January. You will create a summary area which will
include highest price,
lowest price, total count, and percentage of cars financed.
a) Open the Microsoft Excel data file from the lesson and save
it as
exp07_e02_cpt_02_auto_sol.xlsx.
b) Enter the appropriate formula to calculate total sales and
highlight the cell.
c) Compute the total amount paid.
d) Compute the total amount financed.
e) Using the IF Function, compute your commission only on
cars that received a
10. loan. Calculate the commission on those loans at a rate of 1%
of the selling
price in column G. Tip: Your IF Function should use the
greater than “>”
symbol to be successful.
f) Compute the Total Commission.
g) Highlight the row of the most expensive car.
h) Enter the comment in A11 “My favorite car.”
i) Compute the statistics using Functions as labeled in the data
file for the Total
Number of Cars Sold, Highest Priced Car, Lowest Priced Car,
and the
Percentage of Cars Financed.
j) Format the completed worksheet using currency and
percentage and insert an
appropriate image.
k) Insert today’s date at the bottom of the worksheet.
l) In cell A 25, insert your First Name, Last Name, and MEID.
11. m) Save your changes and close the workbook.
CIS105 At-Home Final Exam Part 1: Project – 70 points
5
MICROSOFT ACCESS (20 points)
The Cooking Show
The local television station has decided to produce a new
cooking show. You have
been hired to manage the database of recipes they will use. You
have already
created a database in Access that stores the recipes they will use
in their first three
shows.
The producer would like for you to generate a report based on
this table. He has
specific requirements for the report. They are as follows:
1. The report should be grouped by category.
2. It should be sorted by recipe name and then by cooking time
12. in ascending
order.
3. He would like to see the average number of servings per
category group.
4. He has made a special request that you provide a printout in
the same
format as the overall report that shows only recipes that
produce 10
servings.
5. He would like the total number of recipes displayed at the
end of the report.
Based on these requirements, create the report for your
employer. Open the
Microsoft Access data file from the lesson and save it as
exp07_a04_case_sol.accdb.
Create the report based on the Recipes table. Use any report
creation method you
like and make sure to include all fields in the table. Select a
layout and style of
your own choice. Follow these additional specifications as you
create and edit the
report:
Add or change the report logo to an image of your own
13. selection.
Center all data and headings except for Recipe ID and
Category
Change the title on the report to Recipe Database
Add your name and MEID to the top right corner of the report
header
Using the view of your choice, make sure that the report is laid
out attractively on
the page. Manipulate field sizes and placement as needed.