Servomax

TM
www.servomax.in
Power Conditioning &
Power Saving Products

• •Subjected to rigorous and strict quality controls at every stage of manufacturing Designed to meet latest national
international standards like BIS, IS, IEC, ANSI, BS, DIN, etc. Wide range of Transformers duly tested at Central Power Research•
Institute, Bangalore , Bhopal Quality assurance programme available
• Off-circuit tap changer to provide +5% to -5% in steps of
2.5% (or as specified by customer)
• On-load tap changer to provide +5% to -15% in steps of
1.25% (or as specified by customer)
• 3 Phase, 50 Hz in voltages of 11 KV, 22 KV and 33 KV
• Continuous duty
• Painting as per IS / IEC standards
• Vector group Dyn 11
• Standard fittings as per IS: 2026 / IEC 76 / BIS 1180
• HV side cable box/Bare Bushings
• LV side cable box / bus duct
• Design conforms to BIS 1180 & IS:2026, BS 171, IEC 76 and
other relevant standards
• Latest manufacturing techniques to ensure cost
effectiveness and reliability
• Designed for 25 years of trouble - free performance
• Very low power loss and low noise
• Optimum utilization of active materials for sleek design
• Withstands electrical impulses, thermal and dynamic
stresses
Technical Specifications
Salient Features
• • •Tube Mills Telecom Centers Rice Mills
• •Rolling Plants Educational Institutions
• • •Cold Storage Clubs Pharmaceuticals Units
• •Residential & Commercial Food Processing Units
... and many more.
Most Suitable for
• •Subjected to rigorous and strict quality controls at every stage of manufacturing Designed to meet latest national
international standards like BIS, IS, IEC, ANSI, BS, DIN, etc. Wide range of Transformers duly tested at Central Power Research•
Institute, Bangalore , Bhopal Quality assurance programme available
• Off-circuit tap changer to provide +5% to -5%, +7.5% to -
7.5% , +10% to -10% taps
• On-load tap changer to provide +5% to -15% taps in
steps of 1.25% / +5% to - 15% in steps of 2.5%
• 3 Phase, 50 Hz in voltages of 11 KV, 22 KV and 33 KV
• Continuous duty
• Painting as per IS / IEC standards
• Vector group Dyn 11 ( or ) as required
• Standard fittings as per IS: 2026 / IEC 76
• HV side cable box/Bare Bushings
• LV side cable box / bus duct
TM
Medium & Small Power Transformers
Distribution Transformers
Capacities Available upto 16 MVA
• Design conforms to IS:2026, BS 171, IEC 76 and other
relevant standards
• Latest manufacturing techniques to ensure cost
effectiveness and reliability
• Designed for 25 years of trouble - free performance
• Very low power loss and low noise
• Optimum utilization of active materials for sleek design
• Withstands electrical impulses, thermal and dynamic
stresses
Salient Features
All DISCOMS Substations
Most Suitable for
* Inverter duty Transformer for Solar &
Wind Power Generation Application
Capacities Available upto 3150 KVA

Provides perfectly stable output even under severe conditions of unbalanced voltage
conditions. Ideal to protect the electrical and electronic equipments from high and low
voltage.
Protections
• Single Phasing Prevention
• Output Electronic Over Load Protection
• Phase Reversal Protection
• Input Short Circuit Protection with MCB
• Input Over Load Protection with MCB
• Output Low Voltage Protection
• Output High Voltage Protection
• Audio Alarm for Protections
Indications
• Mains Input on 3 LED Indications,
• 3ph output on indication
• Phase Reversal indication
• over Load indication
Indications in LCD Display
• Input High and Input low
• Output on indication
• Output high Cutoff and Output Low Cutoff
Input Voltage Range : 300 - 460V / 340 - 480V / 360 - 460V
AC 3 Ph
Output Voltage (3 Ph) : 415V AC
System : Unbalanced 4 wire: R Y B N
Connections : Star
Operating Frequency : 47 to 53 Hz
Output Voltage Adjustable : 380 to 415V AC in 3 Ph
Output Voltage Regulation : + 1% (No Load)
Output Voltage Regulation : + 1% (Full Load)
Overload Capacity : 120%
Correction Rate : 60 / 30 / 25V per Sec-3 Phase
Waveform Distortion : Nil
Output Waveform : True Reproduction of Input
Insulation : Class F
Short Circuit period &
Percentage : 300% for 250 Milli Sec.
0 0
Normal Operation Temperature : 0 C to 45 C
0
Climate Conditions : 90% Rh Max. Non Condensing at 35 C
Type of Cooling : Natural air cooled up to 600 KVA
Mode of system : Fully Automatic
System Construction : As per IS : 9815 – 1994
Servo Controlled Voltage Stabilizer 3 Phase Air Cooled Capacity Range upto 600 kVA 3 Ph
• Quick response time 10 milli sec (half a cycle)
• Very high efficiency above 98%
• Excellent regulation as high as +/- 0.5%
• “Micro controller” controlled system
• Wide input range of operations & high speed of correction
Salient Features
TM
TM
600KVA 3Ph
Metering On LCD Display
• 3ph Input voltage ph to ph and ph to Neutral
• 3ph Output voltage ph to ph and ph to Neutral
• System Frequency
• Output Current on each ph
Programmable Control Timings
• Over load Cutoff Time
• Auto Restart Time
• On & Off Delay Time
Programmable Parameters
• Output voltage set ( 210-245V)
• Output Low Voltage Cutoff
• Output High Voltage Cutoff
• Input Low on LCD Display
• Input High on LCD Display
• Sensitivity / Regulation
• Over Load Cutoff
• CT full scale
Programmable Controls
• Display Scrolling -
Auto / Manual
• Start / Stop Buttons
Optional Out Door Available
Menu / Start / Stop / Reset
/ Log Button
Data Log: Last 100 fault events
log with Date & Time stamp
and works on FIFO basis.
Very Important For CSD
Analysis Problems

Provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect
the electrical and electronic equipments from high and low voltage.
Input Voltage Range : 300 - 460V / 340 - 480V / 360 - 460V
AC 3 Ph
System : Unbalanced 4 wire: R Y B N
Connections : Star
Output Voltage Adjustable : 380 to 415V AC in 3 Ph
Output Voltage Regulation : + 1% (No Load)
Output Voltage Regulation : + 1% (Full Load)
Overload Capacity : 120%
Correction Rate : 60 / 25 / 15V per Sec-3 Phase
Waveform Distortion : Nil
Output Waveform : True Reproduction of Input
Insulation : Class B
Short Circuit period &
Percentage : 300% for 250 Milli Sec.
0 0
Normal Operation Temperature : 0 C to 45 C
0
Climate Conditions : 90% Rh Max. Non Condensing at 35 C
Type of Cooling : Natural Oil cooled up to 5000 KVA
Mode of system : Fully Automatic
System Construction : As per IS : 9815 – 1994
Protections
• Single Phasing Prevention
• Phase Reversal Protection
• Audio Alarm for Protections
Indications
• Mains Input on 3 LED Indications,
• 3ph output on indication
• Phase Reversal indication
• over Load indication
Indications in LCD Display
• Input lowInput High and
• Output on indication
• Output high Cutoff and Output Low
Cutoff
Servo Controlled Voltage Stabilizer 3 Phase Oil Cooled Capacity Range upto 5000 kVA 3 Ph
• 3ph Input voltage ph to ph and ph to Neutral
• voltage ph to ph and ph to Neutral3ph Output
• System Frequency
• Output Current on each ph
• Quick response time 10 milli sec (half a cycle)
• Wide input range of operations & high speed of correction
Salient Features
• CT full scale
Programmable Controls
• Display Scrolling -
Auto / Manual
• Start / Stop Buttons
Menu / Start / Stop / Reset
/ Log Button
Data Log: Last 100 fault events
log with Date & Time stamp
and works on FIFO basis.
Very Important For CSD
Analysis Problems

With Very High Speed of Correction provides perfectly stable output even under severe conditions of unbalanced voltage
conditions. Ideal to protect the electrical and electronic equipments from high and low voltage.
Metering
• 3ph Input volt meter to read ph
to ph and ph to Neutral
Voltages at Input & Output with
selector switch
• 3ph Ammeter to read Output
Current on each ph
• IGBT PWM AC to AC Switching control
• Individual Phase control
• Quick response time <10 milli sec (half a cycle)
• Wide input range of operations
• Very high speed of correction 3000V per Second
Salient Features
Protections
• Single Phase preventer
Input Voltage Range : 300 - 460V / 340 - 480V / 360 - 460V AC 3 Ph
Operating Freequency : 47 - 53 Hz
Indications
Mains on Indication on each
phase 3 LEDs
3 Phase Output on Indiacation
Technical Specification
Servo Voltage Stabilizers come in a wide range of models. The
standard 3-phase models are suitable for balanced &
unbalanced supply/loads, which conform to the following
specifications:
Input Voltage Range : 360-460V, 340-480V, & 300-460 V
Output Voltage : 415 V 1%, 3-Phase, 50 Hz+
Efficiency (approx) : 99.5%, 99%, 98.7%, 98.5%
Cooling : Oil Cooled
Type : Indoor / Outdoor
0
Temperature Rise : 40 C above ambient
Mounting On : Uni-directional Wheels
Corrections Rate : 8-12 V/Sec.(Up to 500KVA),
6-8 V/Sec (500 to 1000 KVA) &
4-5V/Sec (Above 1000 KVA)
Wave form distortion : Nil
Duty Cycle : 100% Continuous
TM
Linear Automatic Voltage Stabilizer Capacity Range upto 5000 kVA & above, 3 Ph
• Negligible losses in full boost & buck condition
• Suitable for continuous 100 % duty cycle Linear type Vertical
Rolling Contact regulator
• Lowest power consumption on no load - 0.5 % to 1 %
• Life of Stabilizer at full load is 15-20 years
• Double wound Buck / Boost Transformer
• Electronic Control Circuit and Metering panel
• Rugged and Robust Design Technology
Advantages
• 60% Depreciation as per Income Tax Act
• •Reduces Global Warming Higher Productivity
• •Reduction in MDI Uniform Quality of End Product
• •Low Maintenance Cost Reduction in breakdown
of electrical equipments High Energy Savings•
• • •Cement Plants Air Ports Rolling Plants
• • •Flour Mills Engineering Units Cell Phone
Networks Rice Mills Pharmaceutical Units• •
• Cold Storage
Most Suitable for
Cost of Automatic Voltage Stabilizer can we
recovered in 2 to 3 Years
StaticVoltage Stabilizer Capacity Range upto 150 kVA 3 Ph

Provides perfectly stable output even under severe conditions of unbalanced voltage
conditions. Ideal to protect the electrical and electronic equipments from high and low
voltage.
• Individual Phase control
• By pass provision
• Suitable for individual phase
applications
• Quick response time 10 milli sec (half a
cycle)
• Wide input range of operations & high
speed of correction
• Also offering Static Voltage Stabilizers on
customer’s demand
Salient Features
Protections
Servo Controlled Voltage Stabilizer 3 Phase Residential Capacity Range upto 200 kVA 3 Ph
• CT full scale
• 3ph Input volt meter to read ph to
ph and ph to Neutral Voltages
• 3ph Output volt meter to read ph to
ph and ph to Neutral Voltages
• Frequency meter to read system
Frequency
• 3ph Ammeter to read Output
Current on each ph
Servo Stabilizer (Single Phase) Capacity Range upto 25 KVA, 1 Ph
Input Voltage Range : 170-270V AC, 50 Hz
Output Voltage : 230V AC 50 Hz 1Phase
Output regulation : + 1%
Correction Speed : 35V/sec
Line regulation : + 1%
Load regulation : + 1%
Wave-form distortion : Nil
Power factor effect : Nil
Output wave -form : True reproduction of Input
Type of cooling : Natural Air-cooled
System Construction : As per IS:9815
Efficiency : 98.5%
Response Time : 10 milli sec.
Servo Motor Drive : rugged ac step synchronous motor
Enclosure : IP32
Indication on Front Panel
• Input ON
• Output ON
• Output CUT-OFF
• Input LOW
• Input HIGH
• 0-300 V 72 Sq. mm analog meter to read output voltage
High voltage protection
Low voltage protection
Overload protection
Short circuit protection
Protections
} with Relay / Contactor
} with MCB
1 PH SCVS Dimensions (mm)
Input Connection
Output Connection
• 1 & 2 KVA - Sockets
• 3 KVA to10 KVA with Connectors
• Above 10 KVA nut & bolt termination
• •1 & 2 KVA - Power Card with Plug Top 3 KVA to10 KVA with Connectors
• Above 10 KVA nut & bolt termination
Capacity Width Depth Height Weight/kgs
1 KVA 280 310 300 16
2 KVA 280 310 300 18
3 KVA 300 430 300 28
5 KVA 300 430 300 33
7.5 KVA 360 470 310 55
10 KVA 360 470 310 60
15 KVA 440 470 800 100

Salient Features
• • •Uses solid state control circuits Synchronous motor drive No warm - up time
• •No relays Professional grade ICs and Components are used
High reliability
Trouble free operation
Out put : 415 / 200V 3ph as per requirement
Insulation : class H
Speed of correction : 60 / 30 / 25V per Sec. with AC motor 105 V / Sec. with
DC motor
Response time : 10 milliseconds
System Connections : Delta / Star
Ratios : 1:1 and 2:1
Regulation : Better than 3.5 %
Power Factor : 0.75 Lead to 0.75 Lag
Di-electric Strength : 3KV for 60 sec
Insulation Resistance : Better than 1000 Mega Ohms
Coupling Capacitance : 0.01 PF for 100 Db
Leakage Current : Less than 20 Micro Amps
Common Mode Attenuation : 100 Db / 120 Db
Construction Standards : As per IS 2026 Part I & II
Type of Execution : Closed Type
0 0
Operating Temperature : 0 C to 45 C
Type of cooling : Natural air / Forced air
• CNC Machines
• Telecommunication Equipments
• Bio Medical Equipments
• Large Computer Installations
• •Printing Machinery Scientific
Equipments Cell Phone Networks•
• •Garment Equipments Textile
Machineries ... and many more.
Most Suitable for
• •Quick response time 10 milli sec (half a cycle) Efficiency, Low losses, Low
temperature rise and Withstands in all climatic conditions Provides perfectly stable•
output power even under sever conditions of voltage fluctuations Zero wave -•
form distortion Unaffected by load power factor Ruggedized construction• •
• • •Enclosure - IP32 Mounting - Floor Mounted / Free on Wheel Servo Motor
Drive - Rugged ac step synchronous motor
• Eliminates stresses that come from normal electrical transients
• Meet stringent clean power requirements of the sophisticated
/ sensitive equipments
• Reduces the effects of power line problems like Noise, Spikes,
Surges, Transients and Neutral to minimum
• •CNC Machines Bio Medical Equipments
• • •Printing Machineries Cell Phone Networks Scientific Equipments
• • •Textile Machineries Oil & Vanaspathi Plants Large Computer Installations
• Garment Equipments ... and many more.
Input Voltage : 415V 3 Phase
Output Voltage : 415V or 200V 3 Phase
Insulation Resistance : Better than 1000Mega Ohms
Coupling Capacitance : 0.1 PF for 80 db
Common Mode Attenuation : 80 db / 100 db
Construction Standards : As per IS 2026 Part I & II, IS 11171
0 0
Oil cooled (optional)
Input Output Rating Available
415 V AC 3 Ph 415 V AC 3 Ph 3 KVA 3 Ph and
415 V AC 3 Ph 220 V AC 3 Ph upto1500 KVA 3Ph
230 V AC 1 Ph 110 V AC 1 Ph upto 50 KVA 1 Ph
Most Suitable for
Power Conditioner Capacity Range upto 200 kVA 3 Ph
Isolation Transformer Capacity Range upto 1500 kVA 3 Ph

K-Rated Isolation Transformer is to deliver conditioned power to a nonlinear high-
harmonic current load and operate at safe temperatures while minimizing the
harmonic currents
In a data centre, all the distributed power loads are connected through a non
linear power source, due to which HARMONICS generation is unavoidable. These
generated Harmonics are flow back and directly effects the mains power source,
which a UPS. The effect of harmonics de-rates the capacity of UPS. Hence 100%
utilization of UPS capacity becomes wasted. The effect of harmonics also creates
much heat in the transformers of UPS.
To eliminate these direct effects on UPS, K-Factor Transformers are designed
based on the harmonics present the load. The special design of K-Factor
Transformer helps us to depend on much to eliminate or withstanding from the
effects of Harmonics.
Transformer
• Double wound , High Isolation
• Double sized neutral
• Insulation class “H”
• Regulation is better than 3.5%
• Overload rating of 100% for 10 secs
• Core of CRGO and conductor of copper
• Natural / Forced Air Cooled
• As per IS:2026 standards
• Attenuation: 80 db/100 db CMRR
• Primary connect as DELTA, secondary connection as STAR
• Efficiency of the transformer is minimum 98%
Input voltage : 415V 3 Phase Delta
Output Voltage : 415V 3 Phase Star
K-1, K-4, K-9, K-13, K-20
Isolation Transformer as per
customer requirement
• Eliminates stresses that come from normal electrical transients
• Meet stringent clean power requirements of the sophisticated /
sensitive equipments
• Reduces the effects of power line problems like Noise, Spikes,
Surges, Transients and Neutral to minimum
• •CNC Machines Bio Medical Equipments
• •Printing Machineries Cell Phone Networks
• •Scientific Equipments Textile Machineries
• •Oil & Vanaspathi Plants Large Computer Installations
• Garment Equipments ... and many more.
Output Voltage : 415V or 200V 3 Phase
Coupling Capacitance : 0.01 PF for 100 db
Common Mode Attenuation : 100 db / 120 db
Construction Standards : As per IS 2026 Part I & II, IS 11171
0 0
Oil cooled (optional)
Most Suitable for
Ultra Isolation Transformer Capacity Range upto 1500 kVA, 3 Ph
Input Output Rating Available
415 V AC 3 Ph 220 V AC 3 Ph upto1500 KVA 3Ph
230 V AC 1 Ph 110 V AC 1 Ph upto 50 KVA 1 Ph
K-Rated Transformers Capacity Range upto1000 KVA, 3 Ph

System Connections : Star
Output Voltage : 0 - 470V 3 Phase (Continuously Variable)
Di-electric Strength : 2.5KV for 60 sec
Construction Standards : As per IS 5142
0 0
Type of cooling : Natural air / Oil cooled
Type of control : Motorised with Increase &
Decrease switches
Power distribution unit is fitted with multiple
outputs designed to distribute electrical
power.
In a data centre, all the distributed power
loads are connected through a non linear
power source, due to which HARMONICS
generation is unavoidable. These
generated Harmonics are flow back and
directly effects the mains power source,
which a UPS. The effect of harmonics de-
rates the capacity of UPS. Hence 100%
utilization of UPS capacity becomes wasted.
The effect of harmonics also creates much
heat in the transformers of UPS.
To eliminate these direct effects on UPS, K-
Factor Transformers are designed based on
the harmonics present the load. The special
design of K-Factor Transformer helps us to
depend on much to eliminate or
withstanding from the effects of Harmonics.
1 Transformer
• Double wound , High Isolation
• Double sized neutral
• Insulation class “H”
• Regulation is better than 3.5%
• Overload rating of 100% for 10 secs
• Core of CRGO and conductor of
copper
• Natural / Forced Air Cooled
• As per IS:2026 standards
• Attenuation: 80 db CMRR and 60 db
CMNR
• Primary connect as DELTA, secondary
connection as STAR
• Efficiency of the transformer is
minimum 98%
2 Power Distribution
• Floor mounting Panel board with MS
angles and Ms sheets with powder
coated Paint and suitable provisions
for cable
• Distributed outgoing through sub
branch breakers and branch breakers
• Extra sub breakers also provided
• Suitable capacity 3 pole incomer
3 Metering & Indications
• LED indications provided to
read the availability of
incoming supply
• Multi parameter reading
meter to read Voltages,
currents and power is
incorporated
Optional
Soft start facility BCPM
( Branch Circuit Power Monitoring)
Most suitable for
Data Centres, Telecom
TM TM
TM
TM
Power Distribution Unit with K-Rated Transformers Capacity Range upto 1000 KVA, 3 Ph
Auto Variable Transformers Capacity Range upto 2500A 3 Ph

Power Factor Controllers are designed
to operate, Automatically with Micro
Processor Based Automatic Controller
Use a specially designed electronic
control circuit that improves power
factor to meet requirements of load
switching pattern
Improvement of power factor up to
optimum levels is guaranteed
Product range: 20 KVAr to 1000 KVAr.
We provide solutions for improving
plant power factor by installing our
APFC panel
Heavy duty capacitors with detuned
filters will be provided where high level
non linear harmonies present upto 30%
• Payback period is 8 to 10 months
• Reduction in maximum demand
• Energy saving up to 5%
• Low power factor penalty can be avoided
• Extended life for Switch Gears, Capacitors and Cables
• Avoid manual disruptions
• Avoid high current consumption losses
• Reduction in Electricity Bill
Advantages
• All major components are of standard
make like Siemens, Epcos, L&T and
Schneider
• Microprocessor based automatic
controller with power factor display
• All components are carefully integrated
for reliable performance and longer life
• Capacitor duty Contactors and MCB or
MCCB, are used to switch ON capacitors
to minimize switching surges
• Uses small correction steps to maintain
accurate setting
• Auto / Manual Facility, Cooling Facility
• Very low watt losses
• In-built time delay for switching ON of a
capacitor bank to avoid impulse signal
operation. All capacitor feeders have
Auto / Manual mode facility with fuse
protection and isolation
Salient Features
• Manufacturing Companies
• •BPO Organizations Shopping Malls
• • •Steel Mills Spinning Mills Cement and Paper Mills
• •Offices & Buildings Hotel & Restaurants
• •Rice Mills Hospitals
• Cinema Halls / Multiplexes
Most Suitable for
Protections
• Overload with MCB / MCCB
• Manual Bypass provision arrangement
• Short Circuit with MCB / MCCB
• Spike, Surges & RF Suppressers
• Reduces heat generation in chokes,
ballast and prevents energy loss and
hazards
• We can also provide timing profile for
enhanced power savings
• Power savings above 20% in discharge
lighting.
• Uses imported, high quality raw
material to get high efficiency of 99.5%
• Reduction in MDI
• Improves life of all equipment
• Uses Isolation shielding to suppress the
harmonics and to give quality power to
load
• Reduces maintenance cost up to 80%
• Eligible for accelerated depreciation
benefit
• Pay back period is 8 to 12 months
based on the conditions and usage
Salient Features
Most Suitable for
• Street Lights / Security Lighting
• Telecom Buildings
• Sub-Station Buildings
• Work Shops
• Pump Houses
• Software Units / Call Centers
• Hotels and Restaurants
• Commercial Complexes
Food Processing units ..... and many more.
Power Saver Capacity Range upto 1000 kVA, 3 Ph
• Improves quality of power and
enhances life of electrical
gadgets
• Use latest technology to save
power by optimum supply of
power to various loads
• Employs reactive power
management system and
harmonics filtering system
consisting of electronic circuits,
special zig - zag inductors, hi-
tech R.C. Circuits and essential
switch gear systems
• Available in four models to suit
requirements like lighting, motors,
air conditioners and mixed loads
• Eliminates wastage of power in
electrical circuits caused by
super imposed power pollution
Panel Controls & Indications
• Input Three Phase POWER ON
• Digital energy meter
Automatic Power Factor Control Panel Capacity Range upto 1000 kVAR

Our clients are most concerned about power issues such as
power failure, power sag, power surge, under voltage or over
voltage, frequency variation, harmonic distortion and line
noise. Servomax emphasizes the areas of redundant power
supply, voltage regulation, equipment protection and
adjustment. Their power range, applications and the
equipment they protect are listed below:
Power Topology Applications
Lower than 1kVA Single-Phase Line-Interactive UPS PC and Peripherals
1 – 20kVA Single-Phase On-Line UPS Server and Network Equipment
10 – 400kVA Three-Phase On-Line UPS Datacenter and Industrial Equipment
20 – 800kVA Three-Phase modular On-Line UPS Modular Unit expansion and
Redundant power supply can be achieved
within a single rack
UPS systems feature the following
• Leading AC-AC Efficiency
• Fully redundant design and configuration
• High input and output power factors
• Easy expansion without additional hardware
• Supports to seamless operations at low level of TCO (Total Cost of Ownership)
• SMS facility for Energy Reading & Low Power Factor
• Earth fault relay
• Phase Sequence indication
Product Special Features
Most suitable for Industrial, Residential
Airport , Stadium
LT Panels
• Power Control Centres (PCC) Panels
• PMCC Panels
• Motor Control Centres (MCC) Panels
• Automatic Power Factor Control (APFC)
Panels
• Power Distribution Boards (PDB)
• Sub Distribution Boards
• Main Lighting Distribution Boards (MLDB)
• Sub Lighting Distribution Boards
• Control Desks
• Feeder Pillars
• Non – Segregated LT Busducts
Products
• L.V Switchboard
• As per IS Standards
• IP 52 / 54 / 55 protection
• Indoor / Outdoor
• Electrolytic Busbars Aluminium / Copper
• Customized Panels
• Single Front / Double Front / Dead Front
• DMC / SMC Insulators
• Capacity Expandable
• Complete Earthing of Doors & Frame
• Shipping sections as per demand
General Features
World No.1 Industry-leading energy efficiency UPS Systems from Servomax

SERVOMAX established in the year 1982. It is one of the largest manufacturer of Power
Conditioning and Power Saving equipment with advanced technologies.
SERVOMAX brand is synonymous with superior Quality, Reliability and Service - which is our main
focus. The above attributes have helped us in realizing customer satisfaction and loyalty.
SERVOMAX today has more than 50 thousand customers spread across the globe.
Our dedicated R&D team continuously strives towards upgrading products, technology and
providing new features to customers. We always deliver safe and reliable products.
SERVOMAX has a formidable customer list spanning various segments: Industries, Commercial
and Residential Complexes, Bio-medical units, R&D Labs, Textiles, Food & Beverages,
Educational Institutions, Hospitals and many more.
customercare@servomax.in
+91 911 1234567 1800 12 1111
+91 8100 12 1111
Toll Free:
www.servomax.in
TM
OUR PARTNERS
Sathya Solutions
Private Limited Electronics Pvt. Ltd.
THE LARGEST MANUFACTURING BASE IN INDIA WITH 20+ PRODUCTS IN
POWER SECTOR & MANUFACTURING SPACE ABOUT 2 LAC SFT
THE LARGEST CUSTOMER BASE IN INDIA & ABROAD
WITH THE LARGEST INSTALLATION NETWORK

Servomax

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to Servomax

Similar to Servomax (20)

Recently uploaded

Recently uploaded (20)

Servomax