Underhood Black is the right 10-20% semi-gloss finish for most radiator supports, inner fender walls, under hood brackets, and many other parts.

1. SPECIALTY COATINGS Order 24/7 at eastwood.com10
Carb Renew makes rebuilt carbs look as good as new
Make your rebuilt carburetor look as good
as it functions! Restore the OEM look with
Carb Renew (3-8% gloss), available in silver
and bronze aerosol cans. Carb Renew is a
translucent acrylic enamel which resists fuel
and most fuel additives up to 300°F (follow
label instructions carefully). Each aerosol
covers approx. 2 sq. ft.
10179Z Bronze Carb Renew $12.99
3 or more $12.49 each
EW10179Z Bronze Carb Renew,
Case of 12 $124.99
10187Z Silver Carb Renew $12.99
3 or more $12.49 each
EW10187Z Silver Carb Renew,
Case of 12 $124.99
Radiator Black sprays-on
with minimal build for
proper airflow
Regular paints can restrict airflow leading to poor
heat exchange performance. Eastwood’s Radiator
Blacks are designed to offer fast coverage with
minimal build. Our enamel formulations
withstand temperatures up to 300°F. Covers
approx. 6 square feet. Two cans recommended to
completely cover the radiator. Net wt. 12 oz.
10040Z Radiator Black Gloss $14.99
3 or more $14.49 each
10340Z Radiator Black Satin $14.99
3 or more $14.49 each
43473 Large Radiator Fin Rake
8, 10, 12 and 14 fins per inch $17.99
“This Product rocks! I rebuild carbs for resale
and I will always use this. Thanks for making
such a great product Eastwood!.”
– Internet Customer
Almost Chrome –
perfect for small parts
Here’s a paint
that almost
looks like
plating!
Reflective
enough to
faintly see
yourself in it.
Approximately
30% as reflective as chrome. Great
on underhood and chassis hardware, small
brackets and interior plastic. Contains zinc for
corrosion resistance. Withstands temperatures
up to 300°F. One 13 ounce net wt. can covers
about 6 square feet.
25292Z Almost Chrome,
13 oz. Aerosol $12.99
3 or more $12.49 each
Restore it once with 2K
Ceramic Underhood Black
Eastwood’s new 4:1 2-component (2K)
Urethane Ceramic Underhood Black is the
only underhood coating fortified with nano-
ceramic technology. Nano-ceramic particles
ensure the ultimate in durability, chemical
resistance and great long lasting looks.
Eastwood’s Underhood Black is the right
10-20% gloss to match that original sheen.
Ideal for use on fire walls, fender wells,
brackets, heater boxes, pulleys and so much
more! For maximum durability apply over
Eastwood’s Epoxy Primer. To apply, mix
4:1 with included urethane activator and
apply using an HVLP spray gun. One quart
covers about 48 square feet. Kit includes
quart of paint and 8 oz. activator.
11973ZP 2K Ceramic Underhood
Black Quart Kit $59.99
Underhood Black puts
down a satin sheen to
match your factory finish
Underhood Black is the right 10-20% semi-gloss finish for most radiator supports, inner fender
walls, under hood brackets, and many other parts. Underhood Black paint may be applied over
properly cured Gray Self Etching Primer (16014Z) or Black Rust Encapsulator (16060Z) for
improved corrosion protection. These acrylic lacquers withstand up to 250°F and go on thin,
for a satin smooth finish which does not hide surface details. One aerosol covers 6 square feet.
One quart covers about 48 square feet.
10024Z Underhood Black Semi-Gloss, Aerosol $12.99 3 or more $12.49 each
EW10024Z 12 Pack Underhood Black Semi-Gloss, Aerosol $124.99
10045ZP Underhood Black Semi-Gloss, 1 Quart $24.99 3 of more $24.49 each
Before After
43473