Simple Circuit in Breadboard

1. Basic Electronic
Components- Their
Function and
Breadboarding
Application
C A D I T A A N N A T I O N A L H I G H S C H O O L
C O T 2
A discussion Using Breadboard (An Automatic Light
Circuit)

2. 1) Understand electronics circuit,
circuit symbol, schematic
diagram and breadboarding;
2) Construct simple electronics
circuit using a breadboard;
3) Value the importance of
breadboarding.
Objectives

3. A particular type of diode that convert
electrical energy into light.
It is a two-lead semiconductor light
source. It is a p–n junction diode,
which emits light when activated.
When a suitable voltage is applied to
the leads, electrons are able to
recombine with electron holes within
the device, releasing energy in the
form of photons.
LED
Light Emitting Diode
(LED)

4. Resistor
- An electrical component that
limits or regulates the flow of
electrical current in an electronic
circuit.
It is a two terminal device have one
connection on each of its sides

5. Light
Dependent
Resistor (LDR)
A resistor whose resistance
decreases with increasing
incident light intensity; they are
used in many consumer
products to determine the
intensity of light.

6. Transistor
a semiconductor device
used to amplify and switch
electronic signals and
electrical power.
It has more than a cell and is
used for the same purpose. The
smaller terminal is negative and
the larger one is positive.
Abbreviated as ‘B’.
Battery

7. Breadboard
- Also called a proto-board, is a
reusable platform for
temporarily built electronic
circuits.

8. Criteria

9. Evaluation
I. Direction: Identify the best answer to the following statements.
5) Is a reusable platform for temporarily built electronic circuits.
1) A two-lead semiconductor light source. It is a p–n junction diode, which
emits light when activated.
2)A semiconductor device used to amplify and switch electronic signals and
electrical power.
3)Is a resistor whose resistance decreases with increasing incident light intensity.
4) Is an electronic component that oppose the flow of current.

10. II. Identification
Direction: Identify the ff. schematic symbols.D Write your
answer on the space provided.

11. Answer Key
I.
1. LED
2. Transistor
3. LDR
4. Resistor 5.Breadboard
II.
1. Resistor
2. NPN Transistor
3. LDR
4. LED
5. Battery

12. Assignment
What is a parallel circuit?
Give an example of circuit problem.
In ¼ sheet of paper answer the ff.
questions.
1.
2.
References: Book; Simple Electronics, Fully
Illustrated by; Enriquez, Gantalao and
Lasala., Copyright 2004
Internet (optional)

13. Do you have any
questions?

14. Thank you