This document is a project report submitted by five mechanical engineering students to fulfill the requirements for their Bachelor of Technology degree. The project aims to design a power skateboard that uses a chain drive system. The report includes a certificate signed by the head of the mechanical engineering department and their project guide, declaring that the report is the students' original work. It also includes declarations signed by the students and acknowledgements thanking those who provided guidance and support during the project.

1. 1 | P a g e
POWER SKATE BOARD BY USING CHAIN DRIVE
A Project report submitted to Jawaharlal Nehru Technological University Kakinada, in the
partial fulfillment of the requirement for the award of the Degree of
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
Submitted by
Under esteemed guidance of the
U.HARI BABU
Professor
(Mechanical Engineering.)
DEPARTMENT OF MECHANICAL ENGINEERING
QIS COLLEGE OF ENGINEERING & TECHNOLOGY
(An ISO 9001:2008 Certified institution, Approved by AICTE & Accredited by NBA)
(Affiliated to Jawaharlal Nehru Technological University, Kakinada)
VENGAMUKKAPALEM, PONDUR ROAD, ONGOLE-523272,ANDRAPRADESH 2017
G.RAMPRASAD (15495A0304)
R.MOHAN CHANDRA BRAMHAM (14491A0340)
Y.SAI KUMAR (14491A0357)
E.SRIKANTH (14491A0312)
Y.VIJAY KUMAR (14491A0356)

2. 2 | P a g e
QIS COLLEGE OF ENGINEERING & TECHNOLOGY
(An ISO 9001:2008 Certified institution, Approved by AICTE & Accredited by NBA)
(Affiliated to Jawaharlal Nehru Technological University, Kakinada)
VENGAMUKKAPALEM, PONDUR ROAD, ONGOLE-523272, ANDRAPRADESH.
DEPARTMENT OF MECHANICAL ENGINEERING
CERTIFICATE
This is to certify that the project report entitled “POWER SKATE
BOARD BY USING CHAIN DRIVE”is a bonafied work of the following final
B.Tech., students in the partial fulfillment of the requirement for the award of the Degree of
Bachelor of Technology in MECHANICAL ENGINEERING for the academic year 2017-
2018
Submitted by
G.RAMPRASAD (15495A0304)
R.MOHAN CHANDRA BRAMHAM (14491A0340)
Y.SAI KUMAR (14491A0357)
E.SRIKANTH (14491A0312)
Y.VIJAY KUMAR (14491A0356)
Signature of Head of department
Dr.Y. Sesharao Ph.D, MIST
Professor
Signature of the Guide
U.HARI BABU M.TECH
Professor

3. 3 | P a g e
DECLARATION
We do here by declare that the project entitled “POWER SKATE BOARD BY USING
CHAIN DRIVE” is an original work done and submitted by us as a partial fulfillment for the
award of Degree of Bachelor of Technology.
G.RAMPRASAD (15495A0304)
R.MOHAN CHANDRA BRAMHAM (14491A0340)
Y.SAI KUMAR (14491A0357)
E.SRIKANTH (14491A0312)
Y.VIJAY KUMAR (14491A0356)

4. 4 | P a g e
ACKNOWLEDGEMENTS
We wish to express our deep sense of gratitude and indebtedness to U.HARI BABU,
Professor, Department of Mechanical Engineering, QIS college of Engineering and Technology,
Ongole for his valuable guidance, best suggestions and constant encouragement at every step
right from inspection to the end of this report.
We express our sincere thanks to our Head of department, Dr.Y. Sesharao Professor, for
providing facilities to carry out this project work.
Finally, we thank all those who helped us directly or indirectly in successful completion of
this project work.
G.RAMPRASAD (15495A0304)
R.MOHAN CHANDRA BRAMHAM (14491A0340)
Y.SAI KUMAR (14491A0357)
E.SRIKANTH (14491A0312)
Y.VIJAY KUMAR (14491A0356)