2. Every Switch is a Green Opportunity
Switches need to be
AUTOMATICALLY controlled in
order to reduce Energy Bills
Switches
control
almost every
electrical
device
3. Control the Switch for Savings
People forget to turn switches OFF
resulting in energy wastage
This results in higher
energy bills
4. The Everyday Energy Challenge
HOMES INSTITUTIONS BANKS OFFICES HEALTH CARE FACTORIES
How can you stop energy
wastage and save money on
energy bills ?
6. Practical Challenge 1:
Wiring
Sensors need to
be wired to each
device
Wiring ruins the
aesthetics of
finished spaces
and add costs
Very Impractical
7. Practical Challenge 2:
Sensor Failure
If sensors fail, then
wired installation does
not allow the switch to
operate!
Sensor needs to be
removed from loop for
switch to work!
Very Impractical
8. Practical Challenge 3:
Multiple Devices
Multiple devices are
usually in a room!
One sensor needs to
control them all!
Not possible without
a wiring MESS !
Long room requires multiple sensors
Multiple lights and fans and Air
Conditioning requires multiple sensors
Very Impractical
10. The Solution for all situations
Wireless sensors
addresses all these
practical challenges
• No Wiring
• Switch works even
on sensor failure
• Multiple devices can
be controlled !
12. Wireless Sensor: Benefits
No Wiring NEEDED
Sensor can be freely placed
where required
Rapid deployment, often in
under an hour
Aesthetics of the room is
maintained intact
Single sensor can control
multiple switches located in
a single switch panel or
even in multiple switch
panels
Switches will work, even if
sensors fail or run out of
battery !
Users can still turn off
individual devices with switches
Variable delay timings for
different devices
GOOD PAYBACK
CONVENIENCE to users