APNIC Policy Roundup presented by Sunny Chendi at TWNOG 5.0
Room Energy Management.pdf
1. GATEWAY
Sends and receives signals
from nodes and sensors
SMART
THERMOSTAT
Monitors room
environmental changes
and automates the HVAC
DOOR SENSOR
Wirelessly detects if door
or windows are open for
HVAC automation
ENERGY METER
Measure energy
consumption of each
room in real-time
OCCUPANCY
SENSOR
Ultra-sensitive motion
sensor detects if the
room is occupied
HOW IT WORKS
2. Occupancy Sensor
Ultra-sensitive motion sensor
PIR sensors track room occupancy continuously
and reliably, ceiling-mounted for full-room
coverage using a single sensor.
Appendix 2
3. Smart Thermostat
Monitoring and automation for
all rooms with wall thermostats
Automate the temperature in unoccupied and
unrented rooms to save energy. Control
thermostats remotely from the dashboard.
Appendix 4
4. Daikin Node
Appendix 7
Monitoring and automation for all
rooms with Daikin VRV
Automate the temperature in unoccupied and
unrented rooms to save energy. Control
thermostats remotely from the dashboard.
5. Split Unit Smart
Thermostat
Monitoring and automation for all
rooms with remote controlled HVAC
Automate the HVAC temperature in unoccupied and
unrented rooms to save energy. Control HVACs remotely
from the dashboard.
Appendix 3
6. Energy Meter
Measure energy consumption
of a circuit in real time
Track energy consumption of your rooms and
appliances in real time.
Appendix 6
7. Gateway
The connector for all the hardware
The Gateway runs our automation engine and receives
data collected from our Sensors via our proprietary Lo-Ra
radio network. This data is stored on the SensorFlow’s
Cloud-based dashboard.
Appendix 1
8. Balcony Door Sensor
Wireless door open/close automation
Turn the HVAC off or switch to fan mode when balcony or
pool doors are left open, no wiring required
Appendix 5
9.
10. MONITORING & CONTROL ANYWHERE, ANYTIME
• Remote access to your guestroom
HVAC system
• Pre-cool rooms prior to guest check-in
• Access SensorFlow’s cloud-based dashboard
via any mobile device
• Help identify any potential faults in the HVAC
system before it completely malfunctions
11. WHAT IT MEANS FOR YOU
PERFORMANCE INSIGHTS
Monitor performance and get data-driven
insights to prevent faults, costly repairs,
and guest complaints.
RETROFIT SOLUTION
Zero disruption to hotel operations with
installation time taking as little as 5
minutes per room.
OPTIMIZE PRODUCTIVITY
Using real-time data on room occupancy,
energy use, and environmental changes.
REDUCE ENERGY COSTS
Your hotel can save up to 30% in total
energy cost. Increasing your profitability.
IMPROVE SUSTAINABILITY
Minimize resource consumption and
build a greener brand.
INCREASE GUEST
SATISFACTION
Optimize operations, service planning and
room comfort to improve guest
experience.
