Protection Relays Australia offers the new and best selling products ComAp Protection Relays and Generator Controller. Visit our website to know the different ComAp Relays with their different functions.

1. Protection Relays Australia
COMAP
PROTECTION RELAYS
AND GENERATOR
CONTROLLERS

2. COMAP INTELIGEN NT BASEBOX
▪ Comprehensive gen-set controller for both single
and multiple gensets operating in standby or
paralleling modes.
▪ To be used in conjunction with detachable colour
displays InteliVision 5 or InteliVision 8
Support of engines with ECU (Electronic Control
Unit).
▪ Complete integrated gen-set solution and signal
sharing via CAN bus – minimum external
components needed.
▪ Many communication options – easy remote
supervising and servicing.
▪ Gen-set performance log for easy problem tracing
Automatic synchronizing and power control (via
speed governor or ECU).
▪ AMF function, Base load, Import / Export, Peak
shaving, Voltage and PF control (AVR).

3. COMAP INTELIMAINS NT BASEBOX
▪ For multiple up to 31 gen-sets operating in
parallel to mains (or isolated parallel).
▪ To be used in conjunction with detachable
colour displays InteliVision 5, InteliVision 5 RD
or InteliVision 8.
▪ Import/export power control of the gen-set
group; many different power control modes
available.
▪ Reverse synchronization of the loaded gen-set
group to mains.
▪ Coupling of several synchronized mains to a
common bus. Allows to build complex
applications with more mains incomers, bus-tie
breakers etc.

4. COMAP INTELIMAINS NTC BASEBOX
▪ For multiple up to 31 gen-sets operating in parallel to mains (or
isolated parallel).
▪ To be used in conjunction with detachable colour displays
InteliVision 5, InteliVision 5 RD or InteliVision 8
▪
Many different power control modes available
System Baseload with limited export or minimal import
▪ Import/Export power control of gen-set group
▪ Temperature of the system by power control
▪ Dynamic changes of required system power via analog input
▪ Reverse synchronization of the loaded gen-set group to mains
▪ Forward synchronization of Mains to gen-set group
Coupling of several synchronized mains to a common bus
▪ Allows to build complex applications with more mains
incomers, bus-tie breakers, load management etc.

5. COMAP INTELIPRO
▪ The ComAp InteliPro is often used as a Zero-
Export Relay for solar applications.
▪ InteliPro is highly flexible mains decoupling
relay with extensive range of protective functions
to meet the strictest utility interconnection
requirements. It can be used in various
distributed generation applications,
cogeneration units, renewable energy sources or
as a redundant/back-up protection for gen-sets.

6. COMAP INTELISYS NTC BASEBOX
▪ Premium gen-set controller for both single and multiple
gensets operating in standby or parallel modes
▪ Support of cogeneration (CHP) and other complex
applications
▪ To be used in conjunction with detachable colour displays
InteliVision 8 or InteliVision 5
▪ Support of engines with ECU (Electronic Control Unit)
▪ Complete integrated gen-set solution and signal sharing via
CAN bus – minimum external components needed
▪ Many communication options – easy remote supervising
and servicing
▪ Gen-set performance log for easy problem tracing
Automatic synchronizing and power control (via speed
governor or ECU)
▪ Baseload, Import / Export, Temp By Power, Peak shaving,
Voltage and PF control (AVR)

7. COMAP INTELISYS NTC GAS GENSET
CONTROLLER
▪ The InteliSys Gas is an industrial grade controller
for gas generating sets mainly used in CHP
(Cogeneration) and power generation applications.
The InteliSys Gas controls, monitors and protects
the generator set according defined set points and
its configuration.
▪ Preconfigured functions, scalable and configurable
I/Os, large built-in PLC interpreter, broad
communication capabilities and an easy-to-change
software allows to adapt the controller to various
applications with minimum effort.
▪ The InteliSys Gas and its accessories gives you the
perfect solution for your Gas generating set
application. You will get the products and related
services out of one hand.

8. COMAP INTELISYS NTC GAS GENSET
CONTROLLER
▪ Complete control of the generating set, including
engine, alternator and related technology from one
device - saving costs and space in switchboard and
represents single point of data storage for easier
commissioning and troubleshooting.
▪ Predefined gas engine specific functions saves your
time during the system configuration. Interface to
both mechanical engines via sensors (resistive,
voltage, current) and electronic engines with ECU
type of control. One controller can handle various
types of engines.
▪ Interface to ECUs and other on-engine products
like Ignitions, Mixers, Speed Governors,
Detonation controllers significantly improves the
system diagnostics and helps to save the engine
down-time period.

9. COMAP INTELISYS NTC GAS GENSET
CONTROLLER
▪ Compliant to various Grid codes requirements,
including ENTSO-e without need for an extra
Protection relay. This saves your money, space in
the switchboard and keeps the system simple.
▪ Local and Remote monitoring of the complete
controlled technology over Plug & Play Displays,
PC tools and Web based Fleet monitoring tools
significantly reduce system commissioning time
and allows you to monitor your gen-set fleet
constantly.
▪ Large built-in PLC interpreter allows you to
configure the needed logic (e.g. CHP) on your own
without extra programing knowledge. This allows
you to react quickly to customer requirements and
keep your valuable know-how in your hands.

10. COMAP INTELISYS NTC HYBRID
SYSTEM CONTROLLER
▪ InteliSys NTC Hybrid is a controller for applications that
combine gen-sets with a renewable source of power. It
continuously monitors data from all sources of energy
including solar, wind, gen-sets and batteries.
▪ The Dynamic Spinning Reserve function allows the
controller to adjust the output from the gen-sets according
to the output of the renewable source. So, if the power
output from the renewable source begins to drop, the
controller automatically starts the gen-sets to ensure no drop
in energy production from the system.
▪ InteliSys NTC Hybrid communicates over CAN bus with
ComAp gen-set controllers which manage outputs from gen-
sets of different installed capacity and various
manufacturers. Smart power management automatically
select the most efficient combination of gen-sets based on
their sizes to maximize fuel savings.
▪ InteliSys NTC Hybrid provides interface to phovoltaic
inverters with respect to the gen-sets minimum loading
level. If the gen-set output approaches the allowed
minimum, the InteliSys NTC Hybrid regulates the inverter
output to prevent the engine from running underloaded.

11. COMAP INTELIVISION HMI 12.1IN
DETACHABLE COLOUR DISPLAY
▪ InteliVision 12Touch, industrial operator panel
equipped with 12,1” colour, multi-touch screen, is
dedicated together with the main ComAp
controller to visualise and control single gen-set in
various applications.
▪ 12,1" colour, multi-touch screen, TFT display unit
with resolution of 1280 x 800 pixels
▪ Touch based Graphical User Interface, support for
multi-touch gestures
▪ Plug and Play operation (auto configuration based
on controller application)

12. COMAP INTELIVISION HMI 12.1IN
DETACHABLE COLOUR DISPLAY
 Supported controllers :
 InteliSys GAS
 InteliGen NT BaseBox
 InteliGen NTC BaseBox
 InteliSys NTC BaseBox
 InteliMains NTC BaseBox
 InteliSys NTC Hybrid
 Complete access to all control and monitoring
functions. Fast and intuitive navigation

13. COMAP INTELIVISION HMI 17IN
COLOUR TOUCH DISPLAY
▪ The new InteliVision 17Touch is 17“ Touchscreen
display unit designed for complete monitoring and
control of multiple controllers or cogeneration
installation.
▪ HARDWARE FEATURES:
 17" touch SXGA (1280x1024) TFT LCD Display with
LED backlight
 Intel Celeron 827E Processor, Fanless Cooling System
 IP-65 NEMA 4 Aluminum Die Cast Front Bezel
 Two easy access front USB ports
 Over and under voltage protection
 Polarity protection
 Extended temperature range from -20 up to 60°
 UL certified

14. COMAP INTELIVISION HMI 17IN
COLOUR TOUCH DISPLAY
 SOFTWARE FEATURES
 InteliMonitor / IGS-LOG (included for free)
 Multiple controllers monitoring
 Mode change feature for any connected
controller
 Start/Stop any connected gen-set manually
 Control/Monitor of all GCBs / MCBs
controlled by ComAp units
 Set points configurable from one device
 History logs of all controllers
 Full screen mode with lock protection / PIN
 Onscreen keyboard

15. COMAP INTELIVISION HMI 5.7IN TFT
COLOUR DISPLAY
▪ InteliVision 5, industrial operator panel equipped
with 5,7” colour screen, is dedicated together with
the main ComAp controller to visualize and
control single gen-set in various applications.
▪ 5,7” Colour TFT Display with resolution 320 × 240
pixels
Local and Remote display for single controller
monitoring
Plug and play operation (auto configuration based
on controller application)

16. COMAP INTELIVISION HMI 5.7IN TFT
COLOUR DISPLAY
▪ Supported controllers :
 InteliSys GAS
 InteliGen NT BaseBox
 InteliGen NTC BaseBox
 InteliSys NTC BaseBox
 InteliMains NTC BaseBox
 InteliSys NTC Hybrid

17. COMAP INTELIVISION HMI 8IN TFT
COLOUR DISPLAY
▪ InteliVision 8, industrial operator panel equipped
with 8” colour screen, is dedicated together with
the main ComAp controller to visualize and control
single gen-set in various applications.
▪ 8" colour TFT display with resolution of
800 x 600 px
▪ PLUG and PLAY operation (auto configuration
based on controller application)

18. COMAP INTELIVISION HMI 8IN TFT
COLOUR DISPLAY
▪ Supported controllers :
 InteliGen NT BaseBox
 InteliGen NTC BaseBox
 InteliSys NTC BaseBox
 InteliMains NTC BaseBox
 InteliSys NTC Hybrid
 InteliDrive DCU
 InteliDrive DCU Marine
 InteliDrive Mobile
 InteliDrive Mobile Logger

19. COMAP MAINSPRO
▪ The ComAp MainsPro is a solar protection relays
suitable for anti-islanding protection for
installations over 30kW.
▪ The ComAp MainsPro is a protection relay for
mains-to-parallel applications, including generator
sets, cogeneration, micro turbines or renewable
energy sources such as photovoltaic plants or wind
turbines.
▪ It provides adjustable voltage, frequency and loss
of mains protections to safeguard both the
distribution network and the generators.

20. For More Info About
Our Products
Visit us here:
www.protectionrelays.com.au