1. MOLYKOTE 321R
AIR DRYING ANTI-FRICTION
COATING SPRAY
VIZAG STEEL CATALOG NO. 2790600110718
Bolt lubrication with Anti-friction Coating
MOLYKOTE®
For high-tensile bolted connections, the most important criterion for effectiveness is the preload. Using
torque controlled tightening, friction in the thread and under the bearing face directly influences the
attained preload. Bolt lubrication aims to reduce and stabilize friction and minimize the scatter between
fastened joints. Additionally, it will improve the ability to loosen the bolts even after long term operation.
Advantages of Molykote 321R AF Coating Spray on Nuts and
Bolts
Low coefficient of friction
Low variation of friction
Protection from cold welding (galling) of austenitic stainless
fasteners during assembly
Protection from seizure of hot dip galvanized bolted connections
Corrosion protection
Easy loosening
High load carrying capacity
Prevents seizure in higher temperatures
Assured loosening even after years of operation
Dry fasteners, clean handling
Other Steel Mill Application Areas:
1. Valve stems for easy twisting of valves – no contamination
2. Lathe Machine Beds and Lead Screws in Area Repair Workshops
3. Gears and other close fitting components after machining to avoid running-in wear
4. Wire ropes and chains in dusty environments where grease or oil lubrication can attract
contaminants
5. Wear plates and liners in rolling mills to prevent premature wear
6. Cutting tools like broaches, reamers, drills and gear cutters, etc
7. Dry lubrication of all sliding surfaces, oscillating surfaces or areas inaccessible for lubrication
8. Lubrication of circuit breaker components
For assistance in product application, please call Anil Tiwari +91-9886-46-7276
After application, please turn the can upside down and spray for the solvent to clean the nozzle and prevent nozzle blockage
Marketed in this region by Project Sales Corp, Authorised Distributors for Dow Corning India P Limited
Call Anil +91-9866-46-7276; Office +91-891-2564393 sales@projectsalescorp.com
