Concrete Design Facade – Exposed Concrete Walls Give The Exterior An Edgy Modern Look.
Limitless Design possibility with Concrete Design Texture.
Expose Concrete Finish is composed of a mix of elements: Portland Cement, hardest earthen material, Special additives, Natural grains and special polymers to create eternal beauty, aesthetic value and heritage effects.
Concrete Finish is a self-drying, trowel applied finish for walls, floor and ceilings.
It requires 2 to 3 coats for better result depending on actual base of surface. The ultimate – reliable and 100% natural look always insist on Expose Concrete Finish. Expose Concrete is a 2 to 3 mm thick.
It has excellent adhesion over a wide variety of porous surfaces, including concrete, and all types of masonry surfaces. It can be used to produce a high-end and contemporary creative cement wall surface in areas such as commercial businesses, public spaces, retail stores, shops, hotels, cafés, vestibules, and residential applications.
The concrete finish look is very versatile, it is natural, industrial, sleek and modern. The Concrete is a feature in itself which creates that very multi-dimensional look.
8. What is Concrete Finish Texture ?
Concrete Finish Material is composed
of a mix of elements:
9. Portland Cement, hardest earthen material,
Special additives, Natural grains and Special
polymers,
to create eternal beauty,
aesthetic value and heritage effects.
10. Concrete Finish Texture thickness is
2mm to 3mm
It applied on double coat SMOOTH
plaster.
It can be used for Exterior and
Interior.
15. Concrete Design Finish with Groove and
Stud Effect
MID TONE WITH STUD
EFFECT
1 LIGHT TONE WITH
GROOVE & STUD EFFECT
2
16. Concrete Design Finish with Groove and
Different Pattern
LIGHT TONE WITH GROOVE
3 MID TONE TREVETINO
EFFECT WITH GROOVE
4
17. CONCRETE FINISH TEXTURE
Application Technique of Concrete Finish Texture
It's a 3 layer System
First Layer : Coarse Material ( Base Coat) applied by Steel
Trowel with the thickness of 1.5 mm to 2.0 mm
Second Layer : Fine Material ( Top Coat) applied by Steel
Trowel with the thickness of 1.0 mm.
Third Layer : Protective Top Coat (Matt or Glossy) applied by
Roller
( If it is interior application thickness will be 1 .0 mm )