This position is for an Electronic Warfare Technician located in Yuma, Arizona who will perform systems maintenance and operations such as replacing components, wiring circuits, and repairing electronic equipment. The technician should have two years of experience in electronic maintenance areas like signal processing, radar theory, and test equipment and must be able to obtain a Secret Clearance. Qualified applicants should obtain a referral card from YPIC to apply for this full-time position paying $14.63 per hour.
Call Girls In Prashant Vihar꧁❤ 🔝 9953056974🔝❤꧂ Escort ServiCe
ELECTRONIC WARFARE TECHNICIAN
1. ELECTRONIC WARFARE TECHNICIAN
Electronic Warfare Technician I 98944
This position is located in Yuma, Arizona. No relocation assistance is available. Hourly rate is set by the
department of Labor as an SCA position ($14.63) and is scheduled as full time work.
Performs systems maintenance and operations. Applies technical knowledge to perform simple or routine tasks
following detailed instructions. Performs such tasks as replacing components and wiring circuits; repairing
simple electronic equipment; and taking test readings using common instruments such as digital millimeters,
signal generators, semiconductor testers, curve tracers, and oscilloscopes. Operates system under
supervision. Receives technical guidance, as required, from supervisor or higher-level technician. Work is
checked for accuracy. Performs organization and intermediate-level repair when supervised. Performs corrosion
control on equipment/towers.
Documents maintenance actions in IEMS.
Cross-trained and qualified to operate at least one additional EW system.
Two years experience involved in the following electronic maintenance:
Digital/analog signal processing
Synchro-servo circuits
Radar and radar theory
Electromechanical devices
Video signal processing and recording
Communications (multiplexer equipment)
Digital/analog computer systems
High voltage power supplies
Test equipment
Optical equipment
RF signal processing
Antenna systems
Low-voltage AC equipment
Auto-transfer (UPS) equipment
Ability to speak, read, and write English.
Must be able to obtain a Secret Clearance
Formal classroom education equivalent to Navy “C” School or vocational school with formal training in the field
of electronic equipment maintenance and equipment manufacturer training,
Possess a valid state Driver’s License.
How to Apply: Please obtain a referral card from YPIC at the CRC Center and information on how to apply will then be
provided. Contact YPIC at the address and numbers below:
3826 W. 16th Street • 928-329-0990 • Fax: 928-782-9558TTY (928) 329-6466 • www.ypic.com