Bean Bag Toss Research Paper

Bean Bag Toss Research Paper
Corn hole board sets and their different types available now
Description: Bean bag toss can be your best pastime, but only if you know how to find the perfect one for yourself. The following section will help
you do just that.
This article describes the different types of bean bag toss game sets that you will find available for purchase. It will help you choose the one that suits
your preferences, so that you can have a fun leisure time with friends and family.
Types of material generally used:
Corn hole board sets are primarily made with hard and soft wood. Plastic sets are also available in the market nowadays, but wooden ones are given
more preference.
Hard wood sets
Hard wood, mainly Poplar and Birch are used to make this variety of the ... Show more content on Helpwriting.net ...
Description: Making a bean bag toss set is all about precision and familiarity with woodwork processes. The following article will discuss the
necessary things to keep in mind while making one.
Bean bag toss is one of the fastest popularity–gaining leisure games. Due to its appeal to a wide age–group, there has been a recent surge in purchase
of these game sets. Cornhole now has its own associations with many online pages and a large number of online sellers are interested in doing
business related to this. Making a corn hole board is a relatively easy process; it only requires that you have an in–depth knowledge of woodworking,
and precision while working.
Dimensions and mandates of a Bean bag toss board:
The American Cornhole Association mandates that the game platform should be 48 inches by 12 inches board, with a 6inch diameter hole which is
centered 9 inches below the top edge. The platform should be made from ВЅ inch thick plywood. The front edge stands 2ВЅ inches to 4 inches above
the ground while the rear end has to be exactly 12 inches above. Your diagram and planning for building the board should adhere exactly to these
measurements. Regulation Cornhole also requires that the grain–bags should be made of duck canvas that is 6 inches square, and filled with 2 cups or
1 pound (US) of grain. However, plastic–filled grain–bags can also be used in place of grain ones, which will make the bags, weatherproof and durable.
Grain–filled bags may get damaged if left for long in rain or close to
... Get more on HelpWriting.net ...

Graco Pack N Play Quilting Research Paper
When you first start quilting, you should just learn how to make the top. Use a piece of fleece or flannel fabric for the back, then tie the quilt
together every 3 or 4 inches. Use 6 strands of embroidery floss that matches the color of the back and coordinates with the front, trim to about 1 inch.
Every quilter will sometimes need to rip out a seam. When this happens to you, be patient and know that as you gain experience, there will be less
ripping. You will need to purchasesewing supplies before you can sew. You will need a self healing cutting mat, cutting ruler, rotary cutter, fabric
scissors, straight pins, washable fabric marking pens, sewing needles for the fabric you are using, a #75/11 will work well, seam ripper and possibly
some ... Show more content on Helpwriting.net ...
I have never been a huge fan of play yards because my children never stayed in them. They usually became complacent and wanted to be taken out. So
I figured play yards were a waste of money. But for some reason, I decided to try the Graco Pack N Play Bugs Quilt because it actually had a few
extras that came along with it. The Graco Pack N Play Bugs Quilt was around $75, which was a bit steep for a play yard but ended up being worth the
buy. The Graco Pack N Play Bugs Quilt actually has fun and entertainment that your baby can really enjoy. It's around 9 square feet of mesh
contained space for my baby to crawl around and discover.Most play yards make your baby feel as if they are being caged in but I didn't get that with
the Graco Pack N Play Bugs Quilt. I'm going to assume neither did my baby because he stayed in the Graco Pack N Play Bugs Quilt for most of
the day, with no problems at all. The main reason why I liked the Graco Pack N Play Bugs Quilt was because it came along with 4 interactive toys
that my baby could play with and keep him entertained. Alot of the times I would put his toys in his play yard so he would have something to do.
And most of the time he wouldn't play with them.So I didn't expect for him to actually play with the toys that came with the Graco Pack N Play Bugs
Quilt but he did. In addition to the wonderful aspects of the Graco Pack N Play Bugs Quilt, I was capable of taking the Graco Pack N Play Bugs Quilt
along with me whenever I needed to. The Graco Pack N Play Bugs Quilt is more like a Stowe and go play pen which is so convenient. A lot of times
we are in a place where he needs to be isolated because there isn't any baby proofing . The Graco Pack N Play Bugs Quilt is a great play yard that any
parent should have. It's convenient and easy to put together. And you can pack it up and go. Plus your baby will enjoy the bright colors as well as the

sphere critique Essay
Sphere
Sphere is an interesting story about a group of scientists from different disciplines who are brought to a super–secret underwater site where the U. S.
Navy has discovered a mysterious, glowing sphere. Although the movie was very interesting, a lot of scientific facts, it was just too long and there
were parts of the film where I found myself yawning. I give the movie a thumb up for being the movie my teacher chose to show the class. Although
the movie was directed by Barry Levinson and starred Dustin Hoffman, Sharon Stone, and Samuel L. Jackson it would not be a movie I would pick
off the shelf and rent for my own interest.
Psychologist Norman Goodman is summoned to the ... Show more content on Helpwriting.net ...
The team consists of a psychologist (Norman Goodman), biochemist (Beth Halpren), mathematician (Harry Adams), and an astrophysicist (Ted).
According to the Goodman report a biochemist is needed to assess the physiology of the unknown life form. A mathematician is needed because math
would be the common language. An astrophysicist is needed to locate the place in the cosmos. This elite team will be staying in a habitat 1000 feet
beneath the ocean. The habitat is handled by two navy personal. The contact team finds a large sphere in the spacecraft that reflects everything but
humans. According to Ted if they were to put a micrometer around the sphere it would be perfect to the millionth of an inch. Then when the crew
loses contact with the surface because of a storm overhead the team is forced to stay in the habitat. When a few crew members are killed the crew is
forced to find out the mysteries of the sphere while dealing with distrust between each other.
The movie contained some good scientific information. It mentioned the concept of the black hole, a collapsed dead star that has so much gravity it
acts like a huge vacuum cleaner sucking everything (dust, light, and time). It also demonstrated that a liquid hydrogen bomb would send a shock wave
under water and after the shockwave passes everything would be pulled back in toward the source.

The world record small mouth weighed 11 pounds and 15...
The world record small mouth weighed 11 pounds and 15 ounces. Was 27 inches long and 21 2/3 inches in girth. Most smallmouth range from 10
inches up to 20. Bass over 20 inches are rare but a lot of fun to catch. A good healthy temperature for small mouth is between 68 and 80 degrees
Fahrenheit. Normally bass live between 6 to 14 years, but with perfect conditions a bass can live up to 20 years. Small mouth like to create nests with
their tails in 3 to 8 feet of water, with sand and small gravel for a bottom. The male will create and guard the nest. After mating the female is evicted and
goes on to possibly mate with other males. The male will watch after the nest and babies (minnows) for two weeks, then they all split up. Smallies ...
Show more content on Helpwriting.net ...
Smallmouths have both external fertilization and external development. Feeding for smallmouth tops when the temperature is around 78 degrees
and starts to slow down once the temperature goes below 40 degrees. The male always guards the eggs and the babies which are known as fry. The
spawning usually occurs in April or May unless the temperature stays cold than it can be delayed. The first person to describe a smallmouth bass was
Lacepede is 1802. The fry hatch out of their eggs in about a week and then continue to develop for another week. Young smallmouths are fed upon by
yellow perch, Northern pike or muskellunge. Bigger bass are only eaten by northern pike, musky but the main predators of smallmouth bass are
humans. The lifespan in the wild is normally about seven years, but some will live up to 20 years. In captivity the average age is ten years. When
the young hatch out of their eggs they are about 0.2 inches long, very easy prey for a variety of animals. Multiple females will spawn in the nest of
one male and an individual female will spawn in more than one. Smallmouth dance and bite each other, this is their mating ritual. In New York the
record smallmouth was 8 pounds, 4 ounces caught out of Lake Erie on 6/4/1995 by Andrew C Kartesz. Smallmouth bass are beginning to destroy
Brooke trout fisheries and Atlantic salmon fisheries. The meat of a smallmouth is very firm and good tasting so many people catch the fish not only
for the fun of the

Essay On The Prince
I was awoken and taken off the ship at dawn to meet my captor, but not before my uncle's guard bound my wrists together with gold chains. They
placed another gold band around my neck – as customary for a disobedient slave in Vere. The stocky man from before, as well as his subordinate,
guided me off the ship personally – the regent's guard not too far behind. The layers of grime and waste that had plagued my body were now gone.
My hair however, hadn't returned to its former glory. The once–coveted golden locks that used to lie at the base of my lower back now lie unkempt on
my shoulders. Thankfully, they hadn't cut it all off. Apparently, the crowned prince had a thing for blondes. I glanced down at my wrists and ankles as
we... Show more content on Helpwriting.net ...
The stocky man bowed and said something in what I could only assume was Akelion. My mind suddenly raced with all the possible words he could've
been saying. It was Auguste who was better off in that subject, as he was the one to eventually ascend to the throne. I cursed myself in my home
language – but only after the words escaped my mouth did I remember where I was.
"He's got a foul mouth," a voice commented in Veretian. It was commanding, and a bit gravelly on certain syllables. The voice said something again,
but I admit the true meaning was lost on me.
"Come forward," he commanded. I wasn't graced with the opportunity to choose to obey or not, because I was dragged by my arms to the foot of his
throne, inches from his feet. Firm hands on my shoulder pushed me to my knees. I tilted my head up, trying to maintain some regality from where I
knelt, eyes level with his stomach. I looked up and there he was.
The Crowned Prince of Akelios himself. My captor. His eyes scanned over me from top to bottom, slowly, to assess his new prize. His eyes finally
rested on my short, choppy blonde hair. His hand reached out to touch it and I immediately jerked away, my entire body going rigid. I had had enough
of people touching me without permission. His eyes suddenly flashed with a questioning look, but only for a

The Pros And Cons Of Sous Vive Immersion Cooking
Is this the best pod? There are a lot of reasons why sous vive immersion cooking is sweeping the country. It's the taste, the tenderness, the uniqueness
of the result from meats, sea foods, to garden vegetables and to fluffy eggs. It's no wonder people are immersing themselves in sous vive style cooking.
Actually the one thing keeping even more people from enjoying the full sous vive experience is the feeling that gourmet quality units are too
complicated and expensive. And you know something, they were right, until now. Introducing the Gourmia GSV140 Sous Vide Pod 2nd Generation.
It is the game changer for sous vive fans everywhere. The pod sous vive which can be described with just five words, serious sous vive made simple.
That's ... Show more content on Helpwriting.net ...
The packaging is attractive, impressive and long. The top comes off, which contains the clamp. The bottom tube contains the immersion cooker. The
sous vive stick is bigger than what it appears in the picture. It comes with an instruction manual. The stick is about 14 inches long. The clamps top
knob controls the tightness around the precision cooker and the lower knob controls the tightness of the container or pot. The container or pot can have
a thickness of 1 inch. The clamp can also easily fit a cooler. The safety levels are indicated on the cooker. If you do not have the minimum amount of
water, it's going to ring an alarm. You roughly need two and a half inches of water in the bottom of the precision cooker and not to go past 6 inches.
The stainless steel sleeve is removable. Underneath the sleeve are the heating element, the probes and the impeller. At the very bottom of the metal
sleeve is a directional port. You can adjust the port to move the water in a different direction. Just remove the bottom piece and reposition the nozzle.
The electrical cord is roughly 30 inches. Operating the precision cooker manually is actually pretty simple. The large number is the current temperature
and the small number is the set temperature. When you spin the wheel up located

Analysis Of The Topeka Public Library
Through the years 2000 and 2005, the Topeka Public Library had a staff member named Melissa Robertson. She worked downstairs mostly, where her
cubicle was filled with pictures of her and her daughter in various parks, laughing about various memories. There always seemed to be an empty
tupperware pan, too. This pan had held the cinnamon rolls she brought for everyone every Friday, they were gone within minutes. The secret ingredient
was instant mashed potato mix to make them fluffy, a fact that always confused her daughter.
Melissa also volunteered at the local toy store, reading stories for all the children visiting the store. As soon as the announcement was made over the
intercom, their eyes lit up and they stumbled up the stairs in ... Show more content on Helpwriting.net ...
When she smiled, everyone else did too; rooms lit up with pure joy in her presence.
One of the few people lucky enough to spend the majority of their life with Melissa was Kay Kuhlman, they became friends when they were toddlers
and maintained that friendship into adulthood. When they were in grade school, Kay's house caught fire, causing her to lose not only her home, but
many of her possessions too. Melissa was there, offering help in any way she could. When the incident repeated in high school, she provided
material and emotional help again. At just 17 years old, Kay learned she was pregnant, and Melissa was one of the first people she told even
though she was terrified of losing her best friend. She never said anything negative towards her, and instead assured her she had always been her
friend, and she would be there for her through that as well. A few years later, Melissa gave birth to her own kid and their children quickly became
friends; Melissa loved both children so wholly she wrote to the local newspaper about them and got an article published, which is still in Kay's house
to this day.
Many people looked up to Melissa, wanted to learn how to be so compassionate and cared for. It was a lesson that is not easily taught, but she did so
beautifully. She cared about people with all of her heart, in the way some people only care about their family members. She always helped in any way
she could, and excelled at pep talks. No one in her life ever

How The Material Properties Associated With Different...
OBJECTIVE:
To familiarize oneself of the processes associated with the deep drawing of thin sheet metals to analyse the factors that influence its behavior. Through
this experiment, the differences of the material properties associated with different rolling directions will be considered and applied to the deformation
of the cup when formed through deep drawing.
THEORY: Please refer to P5: Plastic Properties of SheetMetal lab manual for detailed Theory. [1]
PROCEDURE:
Sheet metal disks, one with a 3.5 inch diameter, two with 4.0 inches and another with 4.5 inches were first measured for thickness at different
distances away from the centre. One of the of 4.0'' disks had lines scribed through the centre at 22.5В° intervals and concentric circles drawn at a
distance of 0.25 inches apart. Lubricant oil was then applied to both sides of the specimens prior to the drawing process and placed in the Hille press
using the 3 centering arms to centre the sample in the correct position. The four specimens were then drawn using the 10–ton Hille Press with a
clamping pressure of 5 tons/in2 at different predetermined draw lengths. The 4.0'' non–marked specimen was only half drawn, with the remaining
samples fully drawn. Finally, the thicknesses of the cups were measured at the same locations as prior to forming and recorded.
RESULTS:
Table 1: Prior to Deformation
Blank Diameter
Middle (mm)
ВЅ Way (mm)
Edge (mm)
3.5''
0.7
0.7
0.7
4.0''
0.7
0.7
0.71
4.5''

0.71
0.72
0.72
Table 2: After

BRAE 340 Problem set 1 Essay
1.
a. Power– kilowatt,
b. Area – acres,
c. Application Rate – in/hr,
d. Pressure – head,
e. Depth – inches,
f. Length – miles,
g. Velocity– ft/sec,
h. Volume– ac–in,
i. Flow Rate – cu–ft/sec
2. Statements (1) and (2) refer to water volumes. Are these Net or Gross volumes? (1) Crop water use (cu–ft) = Seasonal ET (ft) x Crop area (acres) x
43,560 sq–ft/acre (2) Volume applied by system (ac–in) = Application rate (in/hr) x Irrigation time (hr) x Area (acres)
a. (1) is Net; (2) is Gross
b. (1) is Gross; (2) is Gross
c. (1) is Gross; (2) is Net
d. (1) is Net; (2) is Net
3. Statements (1) and (2) refer to water amounts. Are these Net or Gross amounts? (1) Crop water ... Show more content on Helpwriting.net ...
A salt concentration of 1562 ppm is equivalent to an electrical conductivity of how many dS/m?
a. 1 dS/m в‰€ 700 ppm
b. ppm x (1 dS/m)/(700 ppm) = dS/m
c. The correct answer is: 2.2314285714286
13. If a soil has a moisture tension of 0.15 bars and the salinity of the soil water is 1.86 dS/m, what is the total tension experienced by the plant roots?
That is, what is the sum of the moisture tension and the osmotic (due to salinity) tension?
a. 57 cb
b. 34 cb
c. 71 cb
d. 67 cb

e. 206 cb
i. moisture tension = bars x 100 cb/bar = cb ii. osmotic tension = dS/m x 30 cb/(1 dS/m) = cb iii. total tension = moisture tension (cb) + osmotic tension
(cb)
14. What pumping rate (CFS) is required to deliver 47 acre–inches in 20 hours?
a. rate = amount Г· time
b. rate = ac–in/hr x 1 CFS/1 ac–in/hr = CFS
c. The correct answer is: 2.35
15. Crop ET is 0.22 in/day, and irrigations are every 7 days. What is the crop water use between irrigations (in)?
a. Amount = rate (in/day) x time (days) = inches
b. The correct answer is: 1.54
16. 30 acres of cotton uses water at the rate of 0.21 inches per day. How many cubic feet per day does the cotton use?
a. Volume = depth (in) x area (acres) = ac–in/day
b. ac–in/day x 1 ft/12 in x 43560 sq–ft/acre = cu–ft/day
c. The correct answer is: 22869
17. A rain gauge is constructed of a funnel with diameter D = 4 inches, fixed to the top of a tube with diameter d = 2 inches (see drawing). Rain water

Outline Of Proposed Proposal For A Proposal
Introduction The introduction of the proposal should be one complete page long and will most likely be divided into two paragraphs. Notice that the
section headings (Table of Contents, Abstract, Introduction, etc.) are still formatted in Times New Roman, 12 point font. Titles, cover pages, and
section headings do not need to be in oversized font, but these may be bolded or underlined to create a separation between the heading and the text.
Also, notice that the section heading appears on the first line and the text begins on the second line (extra space and/or skipped lines should not be
present). The introduction will give more details about the problem that the proposal solution will address. While the problem was identified in the
letter of transmittal and the abstract of the proposal, this section will allow for more details to be identified about the exact problem. The reader
should have a complete understanding of exactly what led the author to write this proposal. This will be the only place that the problem will be
discussed in detail and may include data or statistics related to the problem. Ideally, this portion of the proposal should not include any figures, tables,
or illustrations. Instead, those can be utilized in the body of the proposal to explain the solution plan and benefits. The second paragraph of the
introduction can discuss the purpose of the proposal (the solution and request). This should briefly introduce or outline what the proposal suggests as

Personal Narrative: From Home To Arkansas
I'm sick and tired of living in an apartment that is designed to fit 5 people comfortably, but only two people live there. Rent is through the roof; my
roommate never pays on time, and my neighbors party all night long every single night. I can't stand it any longer! I finally realized how bad it is
because I would rather go back home and live with my parents. I am leaving that colossal apartment to find something my size. Emma size. With my
budget of $15,000, I want something small, livable, and towable. My lifelong friend Jalyn is traveling with me to Arkansas to help me choose the tiny
house of my dreams.
The first house in Arkansas wasn't so tiny. It was priced at a whopping $18,500 with 160 square feet on the main level and 80 square feet... Show more
content on Helpwriting.net ...
It was the most adorable house I had ever seen! Thinking to myself, I thought that if the outside was perfect in everyway possible then how
flawless could the inside be. After seeing the outside of the gorgeous 128 square foot for $15,000, I knew it would be a perfect match. The
salesman led us inside, finishing any of my worry that I wouldn't find a house of my own. It was enormous! Whoever designed and built this house
did an excellent job on the kitchen layout. There was even a couch in the kitchen/dinning room/living area, all furniture and appliances included.
Everything in the kitchen was on a single wall, leaving the rest of the ground floor to do what I want with it other than the bathroom. Surprisingly,
the restroom was extensive for the amount of storage it had and the shower did not have a toilet in it and it had a door. The stairs were steep but not
steep enough for me to be scared of falling out. Reaching the top and seeing into the loft allowed me to picture myself settling down in this baby
house, maybe even getting a dog. The loft area wasn't very interesting except the high ceilings and the fact that I could fit my queen size bed in there,
but then I noticed a door. I opened it, thinking that it was just another closet. No, it was the deck! It was perfect in every way, shape, and form! I had
my heart set on it, but then I was

Gas Company : One Of The Nation's 440 Gas Companies
I.Major Facts:
Fauquier Gas Company is one of the nation 's 440 gas companies. Fauquier served an area where land use was changing from agricultural to
residential and commercial. The manager of supply management for the Fauquier Gas Company in the Carolinas is, Mr. Bill Murphy. Mr. Murphy
is responsible for purchasing material used in all of Fauquier's projects for gas distribution such as fitting, pipes and meters. Mr. Murphy found out in
January that Fauquier has a big project to meet the increased demand for gas that is scheduled to be complete by September. Mr. Murphy is
concerned about being able to find a supplier who could deliver the request of 3 ВЅ miles of large–diameter pipe for a new residential and commercial
development by construction time of June. Mr. Murphy needs the approved purchase request immediately so he can contact mills and get quotations
on prices and delivery dates. He needs to acquire 3.5 miles worth of large diameter pipe for the residential and commercial development. The mills
schedules for pipe production require a substantial lead–time. Mr. Murphy is also concerned that the mills would not be able to accommodate Fauquier
's schedule. Both the design and construction organizations are who develop and approve the purchase request; both sections are under the
management control of the vice president of operations. Mr. Wilson informed Mr. Murphy that the request would be for Вѕ inch wall thickness and 57
feet instead of the normal request of Вѕ

Taking a Look at Sedum or Stonecrop
Sedum (Sedum spp.), or stonecrop, is a resilient succulent that consists of about 400 species that can grow pink, white, red or yellow,
butterfly–attracting, star–shaped flowers. Although some varieties can thrive in warmer zones, most are hardy to U.S. Department of Agriculture plant
hardiness zones 3 through 9. Because these zones can experience sometimes unexpected cold temperatures and frost, knowing which type of stonecrop
to grow is essential to your success. (See References 1 and 2)
About Sedums
Sedums varieties can range in height; some low–growing varieties reach no more than 2 inches in height, while some tall varieties can reach up to 2
feet or more. The low–growing varieties work well in rock gardens and make good ground cover, while the tall varieties work well in borders or as
cut flowers. The origin of the variety you choose to grow greatly determines whether it will survive in your climate. Without proper protection, sedums
that originate from tropical or desert–like climates won't tolerate cool, frost–prone areas, while sedums that stem from cooler areas, won't tolerate heat.
(See References 1, p. 54 and References 3, p. 190)
Freeze–Hardy Sedum Varieties
Sedums with finer, smaller leaves are generally more cold hardy and less heat tolerant than those with large leaves. (See References 3) Some
frost–tolerant varieties that are hardy to USDA hardiness zones 4 through 9 include the 4–inch tall tasteless stonecrop (S. sexantulare), which grows
yellow flowers

Murder Report Essay
On Sunday 10/22/17 at about 2025 hours while I was at the Auburn Police Department I heard dispatch advise, via the radio, of a possible stabbing
at the Big Foot Java located at 407 Auburn Way S in the City of Auburn, King Co, WA. Dispatch advised a male was stabbed in the abdomen, was
bleeding from the mouth, arm and leg, and there was a puddle of blood.
I arrived in the driveway off Auburn Way S to the southeast of Big Foot Java. I observed a black vehicle and a yellow vehicle about 50 feet into the
parking lot, to the west of Auburn Way S, and southwest of Big Foot Java. The black vehicle was facing westbound, and the yellow one was facing
eastbound.
I observed a white male, who was later identified as Bryce Pearson, who appeared ... Show more content on Helpwriting.net ...
I applied pressure to the wound while continuing to search his body or additional injuries.
I observed Pearson had blood on his face, and was possibly bleeding from his mouth. I was unable to determine where the blood on his face as coming
from.
I checked Pearson's pockets and located his WA state ID in his front left pants pocket. I removed the ID from his pocket, and gave the ID to Officer
M.R. McNabb.
Valley Regional Fire Authority (VFRA) and Medic One arrived and I stepped away from Pearson to allow them to treat his injuries. Either Medics or
VRFA placed Pearson in the back of a Medic One vehicle.
I assisted multiple Officers in placing crime scene tape around the perimeter of the scene.
After a while I asked either a VRFA employee or a Medic what Pearson's status was, and they told me they had called it, which based on my
experience I knew to mean they had pronounced him deceased.
I entered the Medic One Vehicle and took photographs of Pearson. I observed Pearson had a large puncture wound, about two inches in length and
unknown depth, on the upper right portion of his torso where his chest met his shoulder. I observed a puncture wound on the outside, left side, of his

upper left arm, which was about an inch and half in length.
Medics showed me three additional puncture wounds on Pearson. The first wound they

The Benefits Of Longboarding
Longboarding is becoming increasingly popular, with more and more people taking up the activity. It appeals to so many people because you can
pick up a longboard skateboard and learn to ride it in no time, regardless of your skating skills. Whether you are from class, commuting, or downhill
racing, there is a longboard for you. These boards are most commonly used for transportation, downhill racing, or slalom. Longboards are shaped and
made completely different than the standard street skateboards, and allow for a bigger, more stable stance when riding down hills or cruising around
town. The main advantage to riding a longboard as opposed to the standard skateboard relates to the size of the skateboard deck. Longboards decks are
something that ... Show more content on Helpwriting.net ...
It is fitted with 75 by 78 Road Rider wheels and has Road Rider 180 trucks. It is fitted with Santa Cruz bearings. They allow you to enjoy a smooth and
comfortable ride in almost all terrain. 9. Quest Native Spirit Kick Tail Longboard
https://goo.gl/ov54qz
This Quest Native Spirit Kick Tail Longboard is elegant with very attractive patterns. It features a 40inch complete longboard, which is sturdy and
made of durable all hardwood maple deck, and the aluminum truck is 6 inches long. It is fitted with black 70 by 51 mm PU wheels and precision
ABEC 7 bearings, which are high performance bearings. They allow you to enjoy a smooth and comfortable ride in almost all terrain.
8. SCSK8 Professional Speed Drop Down – Through Complete Longboard
https://goo.gl/LNH6Lg
The SCSK8 Professional Drop down, drop through is a high quality and professional grade drop through/ drop down complete longboard. It is
suitable for sporting, recreation, and regular commuting to work or school. This board is very stable, and has durable high performance premium
grade tires that are optimized for speed. It has a low center of gravity which makes it stable and prevents the board from tipping even when riding at
top speeds. It allows you to ride smoothly on most

Rocky Blboa Persuasive Speech
Summary– Despite having never seen this movie, I have seen this scene hundreds upon hundreds of times. I listen to this speech before every game I
play. This is an all–around great pre–game pump up speech. The coach talks to his team before a big game. He is telling them that the difference
between winning and losing (living and dying) is just inches. In football, they may literally be fighting for inches, but in reality, it's not about the
inches. It's about the effort. Having both played and coached sports, I appreciate the message the coach is sharing. Overall, I just really love this speech.
Credibility – The speaker established his credibility by showing his character. The speaker (coach) seemed to care about his players and their success. ...
The speaker sounded so strong and sincere which made him feel relatable. This ultimately made me want to support him and listen to what he had to
say.
Harry Potter: Deathly Hallows Part 2
Summary – I've never seen Harry Potter so I'm not entirely sure what happened to lead up to this speech being given. A guy named Neville
Longbottom is standing up to the bad guy without a nose. At first it appeared that Harry Potter was dead, and Neville was talking about death and how
great of a person Harry was, then Harry woke up and a fight broke out.
Credibility – I have no idea what type of person Neville Longbottom is, but based on the way he talked about Harry Potter he seemed like a nice and
sincere guy. I'm pretty sure Harry Potter was well liked, so it should have been pretty easy to get people to rally together to support something in
Harrys honor. I believe that Neville established his credibility by using his character.
Reasoning – Neville uses reasoning from principle. He states that people die every day. Therefore, Harry Potter's death should not be the end of the
world. He uses this reasoning to try and convince the audience that Harry's death will not stop

The Prices Of Nap Mats
Price::
The prices of nap mats will vary based on several factors like size, model, surface material, and much more.
Size – Most nap mats measure19 inches by 45 inches, and is folded to15 inches by 19 inches when being stored. Larger sizes will definitely cost more
that smaller sizes of the same brand. Just be sure to pick the right size based on your baby's body size and age.
Thickness – cheap nap mat brands available in discount department stores are usually just Вѕ–inches in thickness. This explains why most toddlers
prefer sleeping under it– it's not any comfortable than the floor. Go for a nap mat that's at least one inch in thickness, but if you adore your little one,
consider premium or heavy duty mats which are 2 inches thick, ... Show more content on Helpwriting.net ...
Construction and Design::
Nap mats are made from an assortment of materials types and the filling is done mainly with polyester batting. Just like you'll buy baby blankets and
pillows, size, color, surface materials are all design features you'll want to look at. Here is our analysis of nap mat construction and design features:
Color
The first thing you look at when shopping for a nap mat is its color. Look for a solid, neutral color ranging from soft hue to vogue. The idea is to
find a soothing, calming, and inviting color. Nowadays you can find an assortment of patterns like Spiderman, dinosaurs, monsters, as well as Sponge
Bob Square Pants. However, it will depend on the likes of your child. For some kids, such patterns may be distracting, if not scary.
Surface Material
Most cheap nap mats are made from vinyl which may cause your little one to sweat and wake up smelly and exhausted. Choose a mat with breathable
pure cotton cover that can be easily detached for washing. It may cost a little more, but it's worth the extra bucks.
Nap mat

Analysis Of The Kidkraft Amelia Dollhouse
The KidKraft Amelia Dollhouse is great for many ages from toddlers to pre–teens who like to play with their dolls. Wooden dollhouses are
environmentally friendly, built to last for a very long time, and are big enough for your child and her friends to all play together. They're a good
choice for kids who are older than 3 years old. A wooden dollhouse can be passed down from one generation to the next, too. It's special when your
little girl has a dollhouse that she can save for when she has her own daughter in the future.
Features of the KidKraft Amelia Dollhouse
Gliding elevator
Sturdy wood construction
Three stories almost 4 feet tall
Includes 15 pieces of furniture
Four rooms and a balcony
Accommodates 12 inch dolls
Staircase connects first and second floors
Specifications
Dimensions: 32.7 wide x 16.1 deep x 47.6 high inches
Weight: 38.8 pounds
Assembly required
Colorful Dollhouse
This KidKraft Amelia Dollhouse is a colorful house that kids will love. The colors are bright and vibrant. It's a light pink and white with accents of
black. There's detailed scrollwork on some of the pieces like the decorate corners and the gliding elevator. While it's a beautiful dollhouse that she'll
love, it has a bit of sophistication. Your little girl can pretend her doll is living in the city of Paris with this beautiful, sturdy wooden dollhouse.

Gliding Elevator
Kids want some realistic parts to the dollhouse, so they can play pretend. Her doll can walk down the stairs, or if

Narrative Essay About A Fishing Trip
Our family has rules set that say you have to be 10 years of age or older to go on our Canada family fishing trip. At our family gatherings I hear so
many stories of how many fish that they caught. I am filled with anticipation to go with them and catch some of those great big fish. I have dreamed
of the day now it is here I am ready to go, my bags were packed, the boat all clean and off we went. I sure enjoyed the boat ride out to the spectacular
fishing hole. Knowing that there are so many huge fish out in the water and hoping it is like all the stories I have heard. The ice cold water splashing
against the hull of the boat, sending a shiver through my entire body. The fishing poles ready for action sitting in the rod lockers bouncing with
anticipation much like I was. The boat is a brand new Lund with a 115 horse motor busting through the white caps. Cutting through the ... Show more
content on Helpwriting.net ...
We just arrived at one of the famous fishing holes. Waves rolling over the rocks. We call it the walleye chop. We drop our lines down as fast as we
could, like a rock vigorously skipping across the lake. When it finally hits bottom we give it two or three reels up. We turn the fish locator on and
it glows with action at all of the fish. My face lit up knowing that fish are down there. We then drop the trolling motor down and gave the remote a
few clicks. Slowly the boat glided into motion. As we troll along I gave my new pole a few jigs. My uncle says he has one on. Suddenly, there was
tapping at the end of my fishing rod. I let some line out and the fish takes it. I gave it a pull and set the hook. My fish started running. I jerk it back
into place; it was swimming my way. My heart began to race as it was inching closer to the boat. I pulled it out of the water and it was a nice 18
incher. Shining with beams of sunlight; I tossed him into the live well. I throw the branded line back down to get some

Myths And Facts About Waist Cinchers
Know the facts about waist cinchers
What are waist cinchers?
Waist Cinchers are a kind of corset, which are exclusively designed for women to support their waist. The main purpose of wearing a waist cincher
is to compress the waist as well as to create an even abdominal area. Some people call them as shapewear or compression underwear. The latest brands
of these types of corsets come with a rear zipper.
What is the use of a waist cincher?
Besides wearing as clothing, most women use this innerwear for waist training to reduce their waist size. Regularly wearing this shapewear will assist
a woman to have a reduced waist over time. Wearing a shorter waist cincher will allow a woman to have better movement during their waist training. It
will ... Show more content on Helpwriting.net ...
Make your workout routine stronger and safer.
3. Do your daily workouts consistently.
Myths and facts about waist cinchers
Myth: A waist cincher will agitate and relocate the internal organs.
Fact: This is not true, as waist cinchers are designed to reduce the size of the waist, but not to relocate the internal organs in a body.
Myth: Wearers will not be capable of breathing while wearing a waist cincher.
Fact: This is not true. Wearing the correct size of the compression underwear will offer you a comfortable fit and will allow you to breathe easily.
Myth: A waist cincher will not offer you the desired result.
Fact: This is again a myth because it will be capable of reducing the waist size of the women by 6 to 7 inches by wearing it regularly.
Myth: Waist training will be difficult with wearing a waist cincher.
Fact: False, as one of the purposes of designing a waist cincher is to make the training easy and comfortable.
Myth: Women cannot wear a waist cincher after their pregnancy or surgery.
Fact: No, it is not true. Women can wear the shapewear after having a detailed discussion with their surgeons.
Bottom line
Any product in the world has its own pros and cons, so waist cinchers are no poles apart. Wearing the correct size of the waist cincher regularly that is
made of a durable material, will offer you the desired

Essay about Nine Inch Nails versus Johnny Cash
Which Version Of "Hurt" Would You Prefer?
Nine Inch Nails versus Johnny Cash The song "Hurt" written by Trent Reznor and originally performed by his band Nine Inch Nails is a
melancholy, haunting song. Nine Inch Nails' version was recorded in 1994 and rerecorded and released by Johnny Cash in 2002. Each of the
performers has a style, which some people would argue is at opposite ends of the spectrum of popular music; one is what is referred to as "Industrial
Rock", the other is country. Indeed, the musical genres are diverse; however, the song "Hurt" transcends the boundaries between old and new, hard and
soft, and especially the differences and similarities between these men. Nine Inch Nails is known for their industrial rock ... Show more content on
Helpwriting.net ...
Reznor is not only a performer; he regularly produces records for other artists ("The Nine Inch Nails Wiki," 2012). The story goes that Cash's record
producer, called and asked Reznor for permission to "cover the song 'Hurt'." Sharples states, "It was as if Trent Reznor unconsciously wrote it for Mr.
Cash" (2011). Trent Reznor was flattered that someone with Johnny's musical talent and long–standing status in the music world would even be
interested in interpreting his song. When Trent first heard the final copy of Johnny's version, Trent stated, ". . .it felt like somebody kissed your
girlfriend" ("The Nine Inch Nails Wiki," 2012). According to Sharples, it would be some four months later that Trent and his music team would
see Johnny's video for the song. It was then that "Reznor was flattered, honored, and moved to tears by the results" (2011). Reznor says. "By the
end I was really on the verge of tears. There was, like, this moist clearing of our throats and then, 'Uh, OK, let's get some coffee.'' (Sharples, 2011).
After Hurricane Katrina hit New Orleans, Trent became angry at the lack of response of the government. He had interest in New Orleans because his
studio was a place he perfected his sound and made music that earned "Platinum" status in sales. Reznor played a benefit telethon concert to aid the
American Red Cross and sang the song "Hurt" with the lyrical changes made by Johnny

How Did The Us Convert To The Metric System
When the United States separated from Britain they kept the original Imperial measurement system despite disregarding the previous government. Ever
since America has used inches, feet, and yards as standard measurement. However, while the U.S. continued to use the imperial system other countries
progressed. In 1799, after the french revolution, France converted to the metric system. Invented by Gabriel Monton in France 1670, the metric system
uses common powers of ten to measure weight and lengths so that it could be conveniently used with decimals. Soon the metric system had spread
from France to Britain and most of the world. Countries now use the metric system to measure length, area, volume, mass, force, pressure, energy,
power, and temperature. ... Show more content on Helpwriting.net ...
By converting to the metric system our trade would increase because there would no longer be a need to change between systems and other countries
could view the modification as making amends. It could also save millions of dollars for the U.S. because large companies like NASA would all be
on the same page using the metric system. Smaller mistakes could also be prevented by swapping to the much simpler metric system. One last thing
the change would impact is education. If kids no longer had to learn two measurement systems they would have more time to learn other material. All
in all, If america wants to prosper economically and in education then the government must make the switch to go

Description Of Office Building
This structure, gateway towers, is an office building with ten floors including a lower level and a penthouse. The twelve story office building has a
total of 11.400 square feet in surface area. The parking for this structure is compensated by a parking garage. The basement garage has 14 spaces,
surface parking has 24 spaces, and future garage has 300 spaces. There is two elevators adjacent to each other and another elevator located by the fire
command center. Apart from the elevators, there is two sets of stairs with access to all floors. In the lowerfloor, there is a mechanical room, a fire
command center, and domestic/fire water service. In the first floor, there is a northeast and northwest tenantarea. The north west tenant area has ...
Perpendicular to the first row, are two rows that are 24 feet apart. The row closest to the entrance ramp has 9 spaces that are 9 feet wide and 18 feet
long. The other row closest to the parking garage has 10 spots. The perimeter of the parking lot is composed of a concrete median curb.
The second floor of this office building has most of the rooms located on the center area of the floor. There is a set of stairs, stair one, located next
to elevator one and elevator two. The walls that make up stair one and surround the elevators have two hour fire barrier. In this same area, there is
an electrical data and custodial room. There is a corridor that leads to restrooms and to an entrance to another elevator and stair two located
between column lines four and six. The women's restroom has three sinks, three small stalls, and one larger stall. The men's restroom has three
sinks, two urinals, one small stall, and one larger stall.Next to the elevator and stairs, are a mechanical, custodial, and data room. Inside this
custodial room is a janitor sink. On both sides of the cluster of rooms, is open office space. There is three concrete columns located in these areas.
These areas has a raised flooring system, which most likely signifies there will be electrical components distributed under the floor. The total
dimensions of the second floor are 166 by 92 feet.
The

Analysis Of The Movie ' Hurt, Nine Inch Nails '
Hurt is a song that was written by Trent Reznor of the industrial rock band Nine Inch Nails in 1994 from the album The Downward Spiral. It received
positive reviews, even receiving a Grammy award nomination for best rock song in 1996 ("Hurt, Nine Inch Nails Song"). Reznor in Cleveland, Ohio
founded the Nine Inch Nails in 1988. Reznor is the main producer, singer, songwriter, and instrumentalist of the band as well as the only official
member of the group ("Nine Inch Nails"). Country music artist Johnny Cash received critical acclaim when he covered Hurt with reviews saying that
Cash's version was much better than the original done by Reznor. Johnny Cash is considered to be one of the most influential and best–selling artists of
the 20th century. Most of Cash's music contained themes of sadness, sorrow, and moral tribulations, which made Reznor's Hurt a perfect cover for
Cash ("Johnny Cash"). Hurt is the type song someone listens to when they have the kind of day that makes them feel alone. Everything you thought
you knew was wrong, people stab you in the back, and everything you used to believe in has vanished. You're left with nothing at the end of the day,
feeling depressed and miserable, that is what Hurt is about. Hurt makes you realize you're not the only one in the world that suffers these pains because
everyone goes through them. It then leaves the listeners feeling as if they are not alone anymore; they can start to relate to the loneliness and misery
that the song

The United States Should Go From The Metric System
The debate on whether or not the United States should go to the metric system has been ongoing for years and still to this day the United States uses
the English System of Measurements. It includes the inch, foot, yard and mile, along with many other units of measurement. The United States is one
of three countries that still use other systems of measurement instead of going metric. The other two countries that have not adopted to using the metric
system are Liberia and Burma, also known as Myanmar.
The metric system is simply a unit of measure. It is used in medicine, science and engineering. This system makes it easier to make conversions by
moving the decimal either to the left or right. It also has stability by using prefixes and each unit has only one value, regardless of what is being
measured or who is measuring. There are fewer measures to learn in the metric system than in the English Customary System. Instead of having to
remember that there are 12 inches in a foot, 3 feet in a yard and 1760 yards in a mile, it would be much easier to multiply or divide a number by a
certain power of 10.
It would be much easier for the United States to communicate to the rest of the world by switching to the metric system. Everything that is important to
the future of our country and economy, such as industry, science business and exports, is already using the metric system. Units in the English system
of measurements such as the foot and gallon are all based on the

Rhetorical Analysis Of Inch By Inch
"Inch by Inch" In a fitting model of a persuasive speech, the movie Any Given Sunday includes a key speech, "Inch by Inch", given by Al Pacino's
character. The speech is given to a team of football players in need of encouragement to face an intimidating game. The structure of his speech, his
confidence in delivering it, and inspirational references to his own life makes the speech motivational and inspiring to the directed audience. This
persuasion is a perfect example of ethos, pathos, and logos. The coach starts his speech by expressing how he is overwhelmed with their given
situation. He reflects to his players the feelings they have. Through this, he is seemingly an experienced model for his players and displays his
many flaws and mistakes. With a change of confidence though, he shifts focus on himself to appear more wise than flawed. He begins displaying
strong spirit and experience. He started off his motivational speech by using ethos so his players would think of him as a credible person. The first
thing Pacino says that makes him sound credible is "Now I can't do it for you. I'm too old." By talking about his age, he reassures his players that he
has been through a lot in his life and has gain much knowledge from his experiences. Then he talks about how he, "Made every wrong choice a
middle–aged man could make," and how he, "pissed away all his money." He concludes his sob story with a quote saying he has "chased off anyone
who has ever loved him." Pacino is

Persuasive Essay On Butterflies
You have decided to release butterflies at your wedding. Do not wait too long to look for a farmer to purchase your butterflies. It takes
approximately 4 to 5 weeks to raise the butterflies. You want to make sure that you are able to purchase the type and quantity of butterflies that you
would like. So it is a good idea to start looking at least 3 months or more in advance and reserve your butterflies, preferably 4 to 6 weeks in advance.
Most farmers ask that ВЅ be paid to reserve the butterflies and the remainder is due approximately 2 weeks before the event.
When you are looking for butterflies, you will find that there are up to 9 different types that the government allows to be shipped across state lines.
Check "Which Butterflies can Be ... Show more content on Helpwriting.net ...
Its colors are an orange–brown, with black markings along with some white markings on its upper wings. They are not as expensive as the Monarch.
They also are a smaller butterfly, with a wing span of 2 – 2 7/8 inches. They do work well in displays because of their size and they seem to be happy
in smaller areas.
Black Swallowtails – Black Swallowtails are a beautiful butterfly. They have a wing span of about 3 Вј" – 4 Вј". They are mostly black with males
having a yellow band near the edge of their wings. Females have a row of yellow spots and a iridescent blue band. They have tails that can be easily
broken. Also, if handled too much, their color does come off. These are raised by more butterfly farmers, but still not by a majority of them. You may
be able to use these in a mixed release.
American Painted Lady – The American Painted Lady looks very similar to the Painted Lady. It has less white markings on its upper wings. Not as
many farmers raise this type though, and you may have a harder time finding

Clip Ins : Find Your Favorite Clip
Faux Hair, Don't Care: Find Your Favorite Clip–in Extensions For Curly Hair Now
If you've yearned for just a few more inches, are looking to sport a pastel hue on the weekend or want some more va va voom in your locks, clip–in
extensions are your answer. They are the quickest way to add length, volume and color to your hair any day of the week, all you have to do is snap
them in to your natural hair and bam! You have an unbe–weave–able new look in a matter of minutes. But, before you go out and buy a set, be sure to
check out our guide that'll give you everything you need to know before you go faux.вЂЁвЂЁWhy choose clip–ins over other types of
extensions?вЂЁClip–ins are a great alternative to permanent extensions; they can last a long time, you can put them in yourself, and they're much more
affordable. While permanent extensions can cost you well over $1,000, clip–ins are easier on the wallet ranging from $12 a strand to $400 for a full set.
They're easy to maintain and you can style them as you please. They are great for going glam at parties or stepping things up a notch at weddings.
They are low maintenance and can be in one day and out the next.
How do I know which length to buy?
Shorties: We're talking chin length or shorter you'll want to grab the 10–14 inch length.
Mid–Lengths: Anything between chin length and collarbone length shoot for 14–18 inch extensions.
Long Locks: Basically anything past your collarbone is game for 18 inches or longer.
Should I buy a 1–piece or

Pvc Fence
Wild and domestic animals can be a huge problem for your backyard garden. They dig up the earth, eat the plants, and destroy crops. Fortunately, you
can keep out pests by building a simple fence around your garden.
If you're on a budget, a simple PVC fence is an affordable and effective solution for keeping garden pests at bay. So how do you build one?
Gather Your Materials
Like any DIY project, it important to first gather your materials. For this project, you will need:
PVC Pipe (2–inch pipe should suffice)
Hacksaw
Vise
Gloves
Sandpaper
Elbow Joints
PVC Glue
Chicken Wire
Wire Cutters
Thick Rope
Zip Ties
Paper Towels
Once you have all of your materials, take them to your work area and organize them. Finally, begin the project. ... Show more content on
Helpwriting.net ...
Determine the height. Start by determining how tall your fence will need to be. If you need to keep out rabbits and small animals, 2–feet should
suffice. If you need to keep out larger animals, 4–feet should suffice. Whatever height you choose, this will be how tall your PVC pipes will be.
2.Clamp and saw. Using the vise, clamp your PVC pipe into place and cut it with the hacksaw. Remember to use the measurements above as a reference.
3.Sand the ends. When all PVC pipes are cut to desired length, sand them with sandpaper until smooth.
4.Apply the glue. Brush the ends of the PVC pipe with a thin layer of glue. Also apply the glue to the PVC elbow joints.
5.Connect the pipes. Carefully insert the sanded and glued pipes into the elbow joints.
6.Remove excess glue. If any glue oozes out of the joints, wipe it away with a clean paper towel.
7.Let dry. Let the glue dry completely. This may take anywhere from 1–hour to 12–hours, depending on how much glue was

Aluminum Easel Essay
Alvin –Heritage Classic Aluminum Easel
Pondering about which easel to buy? Maybe you're a professional painter who needs a lightweight and sturdy companion. Perhaps you're a frugal art
student looking for a smart buy. Or possibly you just want a solid canvas–holder that's easy–to–assemble.
There's one up–to–date aluminum easel that will satisfy all these needs and more. That easel is the Alvin–Heritage Classic Aluminum Easel.
Alvin's durable and lightweight design is ideal in the field, studio, or classroom. Here's why this is the perfect easel for artwork. It's stable, flexible,
convenient, and durable.
Alvin Heritage Classic Aluminum Easel Product Specifications
Secures canvases from 6 to 48 inches high.
Secures canvases up to 1.25 inches thick.
Features 17.5 inch shelf ledge with panel groove.
Retractable legs extend easel to 76 inches
Easily transforms into ... Show more content on Helpwriting.net ...
Alvin's metal easel gives you peace of mind while you're working. It lets you add meticulous details to your painting. It allows you to work peacefully
without unintentional wobble. Have you ever struggled with a shoddy easel? We have! When it's a little breezy, light winds topple your paintings.
Mid–size and large canvases won't stay put, and you're forced to angle them against the wall. When you're trying to finish your masterpiece, you have
to hold the easel with one hand and paint with the other. These are the burdens a substandard telescoping easel afflicts you with.
Alvin's laboratory–tested aluminum easel is different. The finely crafted pivoting feet stabilize this telescoping easel on uneven ground. Their
spring–loaded, locking canvas support seals your artwork in position. Your canvases are safer with their robust rectangular profile frame. They have
not one, but two sets of shelf brackets that fit more canvases and pad sizes. Moreover, their reinforced 17.5 inch canvas shelf includes a panel groove
that grips all types of canvases.

Al Pacino's By Inch
Ellen Cannon Dr. Bailey Eng 102 "Inch by Inch" "On this team, we tear ourselves, and everyone else around us to pieces for that inch. We claw
with our fingernails for that inch." This is a line taken from Any Given Sunday, a movie If the coach would have given an overly emotional speech
that the players could not relate to and make sense of, his speech would not have been as effective.about a professional football team struggling when
their quarterback is hurt. In the movie, Coach Tony D'Amoto, played by Al Pacino, is forced to reconsider the strategies that he has always used to
lead the team, and, in return, gives one of the most famous speeches in movie history when encouraging the team before their final game of the season.
Pacino's "Inch... Show more content on Helpwriting.net ...
The team has grown apart, and they have been playing as individuals rather than as a team. Their lack of togetherness on and off the field has caused
them to lose quite a bit. However, facing their final game of the season, the team's desire to win is at an all–time high. The coach knows that just
thinking about the final game can stir up the team's emotions, and there were many times in the movie where the owner of the football team made
it clear that Coach D'Amoto would not come back to coach the team the following year. This also stirs up many emotions because it is possible
that this will be the last game they ever play with their coach. The coach uses the team's vulnerability as a way to encourage them. He says things
like "You got to look at the guy the guy next to you... You're gonna see a guy who will go that inch with you. You're gonna see a guy who will
sacrifice himself for this team," to bring the team to a passionate uproar. As D'Amato delivers his speech, another way he is able to evoke emotions
through his tone of voice and mannerisms. For example, at the beginning of the speech when he is talking about how the team is down his voice is
solemn and weak, and as his speeches continues his voice becomes excited and hopeful. By the end of the speech he is yelling with authority. From
nervous, to sympathetic, and finally to the wrath essential to be football title holders, Coach D'Amoto takes his team on a roller coaster ride of
emotions. When watching the movie, even the audience is drawn in by Pacino's incredible deliverance of the speech, and one cannot resist becoming
entwined in the enthusiastic encouragement the coach gives his

Pros And Cons Of Pole Chainsaw
Sun Joe SWJ800E 8 Inch 6.5 Amp Telescoping Electric Pole Chain Saw with Automatic Chain Lubrication System: Product Review
If you are looking for a chainsaw that is specifically meant for hard to reach branches that are hanging from your trees, it is best to purchase a pole
chainsaw. However, what should you look for in a pole saw?
Basically, one consideration that you should always consider with a pole chainsaw is your capacity to balance and carry it while using it.
Sun Joe SWJ800E 8 Inch 6.5 Amp Telescoping Electric Pole Chain Saw with Automatic Chain Lubrication System: The Best, Cheapest, and Lightest
Pole Chainsaw in the Market
Snow Joe + Sun Joe, the company behind Sun Joe SWJ800E, is a relatively small player in the chainsaw production ... Show more content on
Helpwriting.net ...
It is a genuinely great product and if there is any problem with this unit, it is nothing that can't be easily fixed on your own. The two year full
warranty also guarantees value for your money, since not every chainsaw manufacturer will be giving you the same benefit. The confidence of Sun
Joe in their unit is enough reason for me to also be confident in their product. Moreover, there are not a lot of choices in the market for pole chain
saw, so if you find yourself needing one, I hope you consider this model and I hope that the experience of owning this unit will be as good for you as it
was as great for me and our entire household.
If you would like to get your hand on this pole chainsaw, you can check out more details, reviews, and comments of the users of Sun Joe SWJ800E 8
Inch 6.5 Amp Telescoping Electric Pole Chain Saw with Automatic Chain Lubrication System by clicking this link:

Autoclaved Aerated Concrete: Advantages And Disadvantages...
Introduction: Autoclaved aerated concrete ("AAC") is currently one of the many building products being touted as "green" or "environmentally
friendly." AAC is not a new building material. is a lightweight manufactured building stone. Comprised of all natural raw materials, AAC is used in a
wide range of commercial, industrial, and residential applications and has been in use in Europe for over 70 years, the Middle East for the past 40
years, and South America and Australia for approximately 20 years.1 According to one manufacturer, AAC now accounts for over 40% of all
construction in the United Kingdom and more than 60% of construction in Germany. The Manufacturing Process : Autoclaved aerated concrete is a
product which is ready, it is factored by the mixing of silica, cement, lime,... Show more content on Helpwriting.net ...
AAC Reduces Additional Material Use and Minimizes Waste and Pollution: The ability of a product to reduce material use, utilize recycled
products, and avoid toxic emissions are key criteria in determining whether a product qualifies as "green" or can be used in a sustainable manner.3
Autoclaved aerated concrete performs extremely well in these regards. 2.AAC Has High Thermal Efficiency: Autoclaved aerated concrete is further
considered a sustainable building product because of its excellent isolating qualities resulting in increased energy efficiency. 3.AAC Reduces Noise
and Improves Internal Air Quality: AAC is also has the ability to reduce and absorb noise or to improve or maintain internal air quality.10 Due to its
millions of independent air cells, which dabble sound transmission, AAC has excellent sound isolation and absorption qualities. 4.AAC Structures Are
against fire, Earthquakes, and Other Natural Disasters: AAC is inorganic, noncombustible, and virtually fireproof. It receives a 4 hour UL fire rating
and has a melting point of over 2900 degrees Fahrenheit. AAC buildings can be resisted to earthquake.

Comp 122 Week 1 Ilab Essay
COMP122
Week 1 iLab – Part 2
Complete the following two programs:
Programming Problem 1
John wants to know the values of the area and perimeter of a rectangle. John can take measurements of the length and width of the rectangle in inches.
John's measurements are expected to be accurate to within 0.1 inch.
1. Identify the inputs and outputs of the problem.
Inputs
Double Length
Double Width
Output:
Double Area
Double Perimeter
2. Identify the processing needed to convert the inputs to the outputs.
Area= length*width
Perimeter= 2*(length+width)
3. Design an algorithm in pseudocode to solve the problem. Make sure to include steps to get each input and to report each output.
A. Declare input and output variable
B. ... Show more content on Helpwriting.net ...
Design an algorithm in pseudocode to solve the problem. Make sure to include steps to get each input and to report each output.
A declare input and output variable

B. read reports measurements in centimeters
C. converted into yards, feet, and inches
D. output variable.
4. Identify two test cases other than the example given above. For each of the two test cases show what inputs you will use and calculate what your
expected outputs should be.
5. Write the program to implement your algorithm. Test your program using your test cases. Did your program produce the values predicted in your
test cases? Explain.
Yes,
For each of the two programming problems, create a program using Visual C++.Net. Make sure to capture a sample of your program's output. The
best way to do this is to click on the console window you want to capture and then press the Alt and PrintScreen keys at the same time. Then paste
your captured screen image into a Word document. For each of the two programs, put the screen capture followed by a copy of your source code into
your Word document.
Your final programming document should contain in the following order: 1. Answers to all of the questions listed above.
2. Screen capture of the first program followed by source code.
3. Screen capture of the second program followed

Bed Room Descriptive Writing
Terrified beyond belief as I fall, i hit the carpet with a soft thud, and turn enough to see you stand to your mesmerizing full height, laughing. You turn
away, and I can practically hear your footsteps boom as you step to the counter, grab my wallet, and leave, closing the seemingly mile–tall door shut.
Alone, in carpet fibers up to my knees, I stay still. You'll come back, right? I wonder.* PRINCESS!!!! *I shout out, and I wait, as the light slowly
fades from the room, and all that is left to illuminate your bedroom is the light flooding in from a crack in the door to the bathroom that you absent
mindedly left on getting ready to go out. That, and the soft glow of your laptop, up on your computer desk. You were serious. I was alone.*
*Wading ... Show more content on Helpwriting.net ...
The finish is too smooth to attempt a climb up the leg, and I ponder in the darkness for a while. The chair would also be too difficult, not to mention
once i reach the seat being at the mercy of your ass. But there, in the back, barely visible. Apower cord, plugged in a power strip. I race toward it, and
gently climb up the cord, straddling it, and stand up on it, delicately balancing my way to the towering plug. Luckily, its contour allows many
places to grip, and soon I am to the top, where the cord begins. I shudder as I look at the thing cord disappear overhead into the darkness, between the
wall and the desktop, but I grasp the cord and begin to shimmy up. The cord is thicker aorund than I am tall, but the rubbery surface allows for ease
while climbing. Slowly and slowy I inch higher, as the floor and power strip disappear into the darkness. Higher and higher I go for what seems like
nearly an hour before, in the darkness, the cord begins to slip. I'm in free fall, my pathetic life flashing before my eyes, dying on the cord of a laptop
before I'm jolted back to reality. I slide a few inches down the cord as it stops, and sweaty and panting, I race to the top. I discover the connector, twice
as long as I, had become lodged in the crack behind the desk, and could not fall to the ground. My meager weight and tugging must have dislodged it. I
climb onto the smooth surface, the room aglow in a soft blue light from the disturbed

Atlatl Research Paper
The atlatl is an ancient paleolithic tool used as a lever to lengthen the distance that a dart can be thrown, compared to using just an arm. But does an
atlatl really lengthen how far a dart travels compared to throwing the dart by hand? Based on accumulated information, the hypothesis was: If an atlatl
is used to throw a dart, then it will lengthen the distance that the dart will travel compared to throwing it by hand. This is because the atlatl is a lever
that acts as another joint of the arm, increasing both the leverage, force, and energy of a throw. To test this, I created an atlatl using a wooden branch
with a spur sticking out of it, paracord, a rock, tape, a bamboo stick, duct tape, knife, and a saw. I carved the wooden branch to ... Show more content on
Helpwriting.net ...
The Aztecs used the atlatl in war in the fight with the Spanish conquistadors, as well as to fish. The name atlatl is actually coined from the Aztec word
atlatl, meaning water thrower. Though there are many variations of the atlatl, the basis of it stays the same. It was generally made with 3 major parts:
the handle, the shaft, and the spur. The handle is what was held in the hand, the shaft is between the handle and spur, and the spur is a slightly inclined
point that fits into a small hole at the end of a dart.
The atlatl is known to have other additions to it. For example, a stone weight was sometimes added which acts as a counterbalance between the atlatl
and the dart. It also resists acceleration, which allows for the dart to store more energy in itself before it pushes off. Some say use of a weight also
lessens the whistling sound that an atlatl can make as it speeds through the air, enabling for a silent and deadly weapon. Another addition to the atlatl
is a wrist loop which prevents the atlatl from flying off of the hand as the dart

The Call Of The Wild
Charles Darwin, an evolutionary scientist, who once said, "it is not the most intellectual of the species that survives; it is not the strongest that
survives; but the species that survives is the one that is able best to adapt and adjust to the changing environment in which it finds itself". In Jack
London 's book The Call of The Wild, out of many themes the most important is adaptation for many reasons. Buck has adapted mentally and
physically, Buck 's original character was changed very quickly after arriving in the cold Alaskan wilderness. Buck adapted in many ways throughout
the book and this helped him greatly in surviving and becoming the lead sled dog and eventually a giant "ghost dog".
Buck started as a pampered large house dog was stolen and he was forced to adapt to the cold Alaskan conditions. Bucks environment has changed
from the beginning of the book he has lived in warm Santa Clara valley California but he must adapt to these cool harsh icy conditions of
Alaska"Buck lived at a big house in the sun–kissed Santa Clara Valley" (London 21). Judge Miller 's place, it was called" (London 21) Buck used to
live in sunny California and lived with a rich family and occasionally went hunting with his owner... But now he has gone to Alaska where it 's a cold
barren and unforgiving landscape where he must adapt to survive "This first theft marked Buck as fit to survive in the hostile Northland environment. It
marked his adaptability, his capacity to adjust himself to

Advantages Of Four Point System For Fabric Inspection
Why Four Point System preferable for Fabric Inspection?
The word of Inspection in garments engineering mainly identifies to the visual examination or review/scrutinize of raw materials (like fabric,
accessories, trims etc). It is an imperative process in any apparel industry to keep away from rejects due to low fabric or accessories quality and
precautions to remove unexpected loss/defects of finished goods.
The quality of a finished item in apparel industry is mostly controlled on the quality of fabric when it is collected as a roll from mills. Even it
occupies 60/70 percent of total garments cost. Apparel industry should take some defensive actions to ensure quality full fabric is being used in their
items and set up fabric inspection ... Show more content on Helpwriting.net ...
Even the most exceptional/excellence manufacturing methods cannot compensate for defective materials.
* Garments producer: Have to inspect minimum 10% per color or more of any consignment when they got and assess them based on a four–point
system. By this process, they can minimize fabric related quality troubles before it moved to production.
* Fabric mill: Have to inspect 100% of finished goods; defects must be recorded for each roll.
Usually four methods may be followed for fabric inspection process.
1) Graniteville "78" system.
2) Dallas system.
3) 4 point system
4) 10 point system
But, above all 4 point system is most popular and broadly used as it is very simple to applicable, educate and learn. Let's find a tiny description of 4
point inspection system below.
Fabric Inspection Process
To use this system someone has to know following procedure:
1) Vast idea on nature of fabric defects (how a defect looks and its appearance)
2) Fabric inspection method or preparation
3) Criteria of giving penalty points based on defects and defect length.

4) Calculation method of total penalty points for total defects found in a fabric roll or consignment.
5) A Check sheet or format for keeping data
Four Point

Bean Bag Toss Research Paper

Recommended

Recommended

More Related Content

More from Maritza Tyson

More from Maritza Tyson (14)

Recently uploaded

Recently uploaded (20)

Bean Bag Toss Research Paper