3. 3. Import HANDELSET. Mate the surfaces and Align the axis of both objects.
4. Import the CENTERAXLE and align the axis of both objects and ALIGN the surfaces.
4. 5. Import the FRONTGEAR and ALIGN the Axis and MATE the surfaces.
6. Import handlejunction and Align right planes and align axis.
5. 7. Import handle and ALIGN the AXIS and PLANE.
8. Import axle and ALIGN the axis and then ALIGN the top plane with right plane.
6. 9. Import Rimo and MATE the surfaces and Align the both objects axis.
7. 10. Import tyre and ALIGN the axis.
11. Import MUDGUARD and ALIGN the axis and Mate the surface mudguard and that of handleset.
8. 12. Import axel for back tyre and Align the axis.
13. Import the back rimo and ALIGN the axis.
9. 14. Align the back tyre axis with axel axis.
15. Align the back mudguard with frame axis and mate the planes.
10. 16. Align the axis and mate the surfaces.
17. Align the bolt axis and then MATE the two surfaces.
11. 18. Do the method to three other bolts.
19. Import the axel alarm and align the axis and mate the front plane axel alarm and gear.
12. 20. Import pedal axel and ALIGN the AXIS and the MATE the front plane with pedal alarm. Do the
procedure with other pedal axel.
21. Align the pedal axis with axel and mate the surfaces. Do same with other pedal.
13. 22. Join the parts to form the chainpart.
23. Tangent the chainpart.