SlideShare a Scribd company logo
1 of 8
During my preliminary task I made quite a few
mistakes, for example no sticking to the 180
degree rule and having to re-film a bit of it.
Although, I learnt a lot from the preliminary
task such as camera angels and when and
how to use them, I also learnt the basics of
editing like cutting and grouping. Furthermore,
it gave me an insight into working as a group
and cooperating with other people, because
of this, I had teamwork skills which benefited
me and my group.
After the preliminary task I researched
adobe premiere, the software we used for
the Thriller. I learnt a lot about sound and
colour editing techniques and was able to
apply them to my thriller where needed
The 180 degree rule and shot reverse shot
were not needed for my thriller as there
were no conversations or interactions
between two people, therefore we did not
use them. However, we did use match on
action during the end scene when the girl
walks into the garage and sees the other
girls on the floor.
The story board was helpful to set out what we
were going to film and to make sure that
everyone in the group had the same mind set for
shooting. However, when it came to actually
filming, we felt we did not need a storyboard as
we discussed what we needed to do during
filming. In the same way, the schedules were
helpful for us to inform our actors about times, but
we found it hard to stick exactly to the schedule
and ended up in filming on another day.
Therefore, we should have tried harder to stick to
the schedules that we discussed
During filming we came across a few difficulties
with certain shots. Therefore, we had to make
decisions on how we would acclimatise to what
was needed. This happened with our first shot and
it is how we came across using the 360 degree
shot in the way that we did. When it came to the
last scene, we wanted to shock and excite the
audience. By doing so, the audience would be
more on edge and want to keep watching.
Because of this decision, we positioned in all
areas of the garage to portray the severity of the
situation.
During the day of filming, we did not stick
to our schedule and because of this we
had to film over 2 days, unlike our plan
suggested. This meant that we required our
actors to return the second day and this
took up a lot of their valuable time. We will
strive to prevent this happening again, and
organise our time in a more realistic way.
Our actors were extremely cooperative and
easy to manage so out shots went very
smoothly. We shot from all angels because we
wanted to experiment and see which would
look more appealing and effective. Luckily,
our location was at a house, so organisation
was easy and consent was not needed. The
forest scenes were a bit harder because
actors and equipment were needed at
different locations. Despite this, organisation
and time was done efficiently and well.

More Related Content

What's hot

What's hot (15)

As media studies evaluation
As media studies evaluation As media studies evaluation
As media studies evaluation
 
Prelim evaluation
Prelim evaluationPrelim evaluation
Prelim evaluation
 
Question 7
Question 7Question 7
Question 7
 
Evaluation (1 min)
Evaluation (1 min)Evaluation (1 min)
Evaluation (1 min)
 
Evaluation 7
Evaluation 7Evaluation 7
Evaluation 7
 
Question 7
Question 7Question 7
Question 7
 
Prelim evaluation
Prelim evaluationPrelim evaluation
Prelim evaluation
 
prepare for edit
prepare for editprepare for edit
prepare for edit
 
5. production reflection sf 2017
5. production reflection sf 20175. production reflection sf 2017
5. production reflection sf 2017
 
Q7) looking back at your preliminary task
Q7) looking back at your preliminary taskQ7) looking back at your preliminary task
Q7) looking back at your preliminary task
 
Evaluation 8
Evaluation 8Evaluation 8
Evaluation 8
 
Evaluation 8
Evaluation 8Evaluation 8
Evaluation 8
 
Evaluation 8
Evaluation 8Evaluation 8
Evaluation 8
 
Question 7
Question 7Question 7
Question 7
 
question 6 evaluation
question 6 evaluationquestion 6 evaluation
question 6 evaluation
 

Similar to Evaluation question 3

Media evaluation – question 7
Media evaluation – question 7Media evaluation – question 7
Media evaluation – question 7Alice Culham
 
Question 7
Question 7 Question 7
Question 7 chanisef
 
Question7
Question7Question7
Question7fin98
 
Media evaluation question 7
Media evaluation question 7Media evaluation question 7
Media evaluation question 7evans92378
 
Preliminary task evaluation
Preliminary task evaluationPreliminary task evaluation
Preliminary task evaluationhaverstockmedia
 
Question 7
Question 7 Question 7
Question 7 Elise95
 
Question 7 evaluation
Question 7 evaluation Question 7 evaluation
Question 7 evaluation willjacko99
 
Eval3 ppt
Eval3 pptEval3 ppt
Eval3 pptZackyt
 
Evaluation quesion 7
Evaluation quesion 7Evaluation quesion 7
Evaluation quesion 7laurengorman
 
Question 7 evaluation
Question 7 evaluationQuestion 7 evaluation
Question 7 evaluationabbie605
 
Evaluation of finished product
Evaluation of finished productEvaluation of finished product
Evaluation of finished productCissnei
 
Evaluation Q7
Evaluation Q7Evaluation Q7
Evaluation Q7Cissnei
 
Evaluation number 3
Evaluation number 3Evaluation number 3
Evaluation number 3mattdavis95
 
Question 7 evaluation
Question 7 evaluation Question 7 evaluation
Question 7 evaluation willjacko99
 
Evaluation question 7
Evaluation question 7Evaluation question 7
Evaluation question 7maxdellimayo
 

Similar to Evaluation question 3 (20)

Media evaluation – question 7
Media evaluation – question 7Media evaluation – question 7
Media evaluation – question 7
 
Question 7
Question 7 Question 7
Question 7
 
Evaluation powerpoint
Evaluation powerpointEvaluation powerpoint
Evaluation powerpoint
 
Q7
Q7Q7
Q7
 
Question7
Question7Question7
Question7
 
Q7
Q7Q7
Q7
 
Media evaluation question 7
Media evaluation question 7Media evaluation question 7
Media evaluation question 7
 
Preliminary task evaluation
Preliminary task evaluationPreliminary task evaluation
Preliminary task evaluation
 
Question 7
Question 7 Question 7
Question 7
 
Evaluation 7
Evaluation 7Evaluation 7
Evaluation 7
 
Question 7 evaluation
Question 7 evaluation Question 7 evaluation
Question 7 evaluation
 
Eval3 ppt
Eval3 pptEval3 ppt
Eval3 ppt
 
Evaluation quesion 7
Evaluation quesion 7Evaluation quesion 7
Evaluation quesion 7
 
Question 7 evaluation
Question 7 evaluationQuestion 7 evaluation
Question 7 evaluation
 
Evaluation of finished product
Evaluation of finished productEvaluation of finished product
Evaluation of finished product
 
Evaluation Q7
Evaluation Q7Evaluation Q7
Evaluation Q7
 
Evaluation number 3
Evaluation number 3Evaluation number 3
Evaluation number 3
 
Question 7 evaluation
Question 7 evaluation Question 7 evaluation
Question 7 evaluation
 
Q7 pp
Q7   ppQ7   pp
Q7 pp
 
Evaluation question 7
Evaluation question 7Evaluation question 7
Evaluation question 7
 

Recently uploaded

VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130Suhani Kapoor
 
Extrusion Processes and Their Limitations
Extrusion Processes and Their LimitationsExtrusion Processes and Their Limitations
Extrusion Processes and Their Limitations120cr0395
 
KubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghlyKubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghlysanyuktamishra911
 
result management system report for college project
result management system report for college projectresult management system report for college project
result management system report for college projectTonystark477637
 
Processing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptxProcessing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptxpranjaldaimarysona
 
247267395-1-Symmetric-and-distributed-shared-memory-architectures-ppt (1).ppt
247267395-1-Symmetric-and-distributed-shared-memory-architectures-ppt (1).ppt247267395-1-Symmetric-and-distributed-shared-memory-architectures-ppt (1).ppt
247267395-1-Symmetric-and-distributed-shared-memory-architectures-ppt (1).pptssuser5c9d4b1
 
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICSAPPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICSKurinjimalarL3
 
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur EscortsHigh Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escortsranjana rawat
 
Software Development Life Cycle By Team Orange (Dept. of Pharmacy)
Software Development Life Cycle By  Team Orange (Dept. of Pharmacy)Software Development Life Cycle By  Team Orange (Dept. of Pharmacy)
Software Development Life Cycle By Team Orange (Dept. of Pharmacy)Suman Mia
 
(PRIYA) Rajgurunagar Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(PRIYA) Rajgurunagar Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(PRIYA) Rajgurunagar Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(PRIYA) Rajgurunagar Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...ranjana rawat
 
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Christo Ananth
 
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLSMANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLSSIVASHANKAR N
 
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...Dr.Costas Sachpazis
 
IMPLICATIONS OF THE ABOVE HOLISTIC UNDERSTANDING OF HARMONY ON PROFESSIONAL E...
IMPLICATIONS OF THE ABOVE HOLISTIC UNDERSTANDING OF HARMONY ON PROFESSIONAL E...IMPLICATIONS OF THE ABOVE HOLISTIC UNDERSTANDING OF HARMONY ON PROFESSIONAL E...
IMPLICATIONS OF THE ABOVE HOLISTIC UNDERSTANDING OF HARMONY ON PROFESSIONAL E...RajaP95
 
Coefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptxCoefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptxAsutosh Ranjan
 
Introduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptxIntroduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptxupamatechverse
 
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...ranjana rawat
 
UNIT-III FMM. DIMENSIONAL ANALYSIS
UNIT-III FMM.        DIMENSIONAL ANALYSISUNIT-III FMM.        DIMENSIONAL ANALYSIS
UNIT-III FMM. DIMENSIONAL ANALYSISrknatarajan
 
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...ranjana rawat
 

Recently uploaded (20)

VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
 
Extrusion Processes and Their Limitations
Extrusion Processes and Their LimitationsExtrusion Processes and Their Limitations
Extrusion Processes and Their Limitations
 
KubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghlyKubeKraft presentation @CloudNativeHooghly
KubeKraft presentation @CloudNativeHooghly
 
result management system report for college project
result management system report for college projectresult management system report for college project
result management system report for college project
 
Processing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptxProcessing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptx
 
247267395-1-Symmetric-and-distributed-shared-memory-architectures-ppt (1).ppt
247267395-1-Symmetric-and-distributed-shared-memory-architectures-ppt (1).ppt247267395-1-Symmetric-and-distributed-shared-memory-architectures-ppt (1).ppt
247267395-1-Symmetric-and-distributed-shared-memory-architectures-ppt (1).ppt
 
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICSAPPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
 
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur EscortsHigh Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Isha Call 7001035870 Meet With Nagpur Escorts
 
Software Development Life Cycle By Team Orange (Dept. of Pharmacy)
Software Development Life Cycle By  Team Orange (Dept. of Pharmacy)Software Development Life Cycle By  Team Orange (Dept. of Pharmacy)
Software Development Life Cycle By Team Orange (Dept. of Pharmacy)
 
(PRIYA) Rajgurunagar Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(PRIYA) Rajgurunagar Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(PRIYA) Rajgurunagar Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(PRIYA) Rajgurunagar Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
 
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
Call for Papers - African Journal of Biological Sciences, E-ISSN: 2663-2187, ...
 
Roadmap to Membership of RICS - Pathways and Routes
Roadmap to Membership of RICS - Pathways and RoutesRoadmap to Membership of RICS - Pathways and Routes
Roadmap to Membership of RICS - Pathways and Routes
 
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLSMANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
 
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
 
IMPLICATIONS OF THE ABOVE HOLISTIC UNDERSTANDING OF HARMONY ON PROFESSIONAL E...
IMPLICATIONS OF THE ABOVE HOLISTIC UNDERSTANDING OF HARMONY ON PROFESSIONAL E...IMPLICATIONS OF THE ABOVE HOLISTIC UNDERSTANDING OF HARMONY ON PROFESSIONAL E...
IMPLICATIONS OF THE ABOVE HOLISTIC UNDERSTANDING OF HARMONY ON PROFESSIONAL E...
 
Coefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptxCoefficient of Thermal Expansion and their Importance.pptx
Coefficient of Thermal Expansion and their Importance.pptx
 
Introduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptxIntroduction to IEEE STANDARDS and its different types.pptx
Introduction to IEEE STANDARDS and its different types.pptx
 
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
 
UNIT-III FMM. DIMENSIONAL ANALYSIS
UNIT-III FMM.        DIMENSIONAL ANALYSISUNIT-III FMM.        DIMENSIONAL ANALYSIS
UNIT-III FMM. DIMENSIONAL ANALYSIS
 
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
 

Evaluation question 3

  • 1.
  • 2. During my preliminary task I made quite a few mistakes, for example no sticking to the 180 degree rule and having to re-film a bit of it. Although, I learnt a lot from the preliminary task such as camera angels and when and how to use them, I also learnt the basics of editing like cutting and grouping. Furthermore, it gave me an insight into working as a group and cooperating with other people, because of this, I had teamwork skills which benefited me and my group.
  • 3. After the preliminary task I researched adobe premiere, the software we used for the Thriller. I learnt a lot about sound and colour editing techniques and was able to apply them to my thriller where needed
  • 4. The 180 degree rule and shot reverse shot were not needed for my thriller as there were no conversations or interactions between two people, therefore we did not use them. However, we did use match on action during the end scene when the girl walks into the garage and sees the other girls on the floor.
  • 5. The story board was helpful to set out what we were going to film and to make sure that everyone in the group had the same mind set for shooting. However, when it came to actually filming, we felt we did not need a storyboard as we discussed what we needed to do during filming. In the same way, the schedules were helpful for us to inform our actors about times, but we found it hard to stick exactly to the schedule and ended up in filming on another day. Therefore, we should have tried harder to stick to the schedules that we discussed
  • 6. During filming we came across a few difficulties with certain shots. Therefore, we had to make decisions on how we would acclimatise to what was needed. This happened with our first shot and it is how we came across using the 360 degree shot in the way that we did. When it came to the last scene, we wanted to shock and excite the audience. By doing so, the audience would be more on edge and want to keep watching. Because of this decision, we positioned in all areas of the garage to portray the severity of the situation.
  • 7. During the day of filming, we did not stick to our schedule and because of this we had to film over 2 days, unlike our plan suggested. This meant that we required our actors to return the second day and this took up a lot of their valuable time. We will strive to prevent this happening again, and organise our time in a more realistic way.
  • 8. Our actors were extremely cooperative and easy to manage so out shots went very smoothly. We shot from all angels because we wanted to experiment and see which would look more appealing and effective. Luckily, our location was at a house, so organisation was easy and consent was not needed. The forest scenes were a bit harder because actors and equipment were needed at different locations. Despite this, organisation and time was done efficiently and well.