1. CURRICULUM VITAE – KHAIRUL AMILIN BIN HAIRUDDIN
Nationality : Malaysian
Profession : Senior Field Engineer
Date / Place of Birth : 21st
April 1977/ Lumut Hospital
Passport Number : A28954306
Date of Issue : 19th
August 2014
Date of Expiry : 18th
February 2020
Marital Status : Married
Home Address : No 21 Jalan SP 6/5, Bandar Saujana Putra,
42610 Lebuhraya ELITE-SKVE,
Selangor, Malaysia
QUALIFICATIONS
• B.Eng in Electrical (Instrumentation & Control)
COURSE & TRAINING ATTENDED
• Well Test Introduction Theory
• Multi Trend- In House Training
• Hydraulic Retrieval Tool- In House Training
• Roxar Acoustic Sand Monitoring System- Theory and Application by
ROXAR
• Setting up and Run CP System- In House Training by STORK UK
• Five Days Combined Sea Survival, Fire Fighting & Helicopter
Underwater Escape Training Course at MSTS Asia Sdn. Bhd.
-
WORK EXPERIENCE
Years
July
2007 -
Present
Company
STORK Technical Services (M) Sdn Bhd (formerly known as iicorr ) - Field Engineer
Key areas of responsibility include:
Corrosion Field Engineer
 Routine Normal Operating Flow Retrieval and Installation of Corrosion Coupons and Probes using
Mechanical and Hydraulic Retriever Tools on PM3-NF, PM3-South & PM3-SAA for Talisman
Malaysia Limited (2007 to present)
 Installation & Commissioning of Corrosion data logger System for Talisman Malaysia Ltd (2007),
Sarawak Shell-F6 (2012) & Sabah Shell – FPS Gemusut Kakap(2014)
 Retrieval and Installation of Corrosion Coupons at Kikeh FPSO, Kikeh Field, for Malaysia
Deepwater Production Contractor (MDPC) Sabah, Malaysia during shutdown on (2014)
 Online Retrieval and Installation of Corrosion Coupons and Probes using Hydraulic Retriever Tools
at Helang Integrated Platform for Nippon Oil Exploration, Sarawak on (2011).
 Removal and Servicing of seized hydraulic access fitting caps at BO-B for Talisman Malaysia
Limited (TML) on (2009)
 Close Visual Inspection (CVI) and Installation of Chemical Injection Quills during Platform
shutdown at PM3S-CAA and PM305-SAA facilities for Talisman Malaysia Limited (TML), Malaysia
(2007 to 2012)
 Installations of Chemical Injection and Sampling on all CI & Sampling points on BO-A for Talisman
Page 1 of 4

2. Malaysia Limited (TML) (2009 to 2012).
UTWT Baseline Inspector
Perform piping wall thickness measurement by applying Ultrasonic technique at fabrication yard.
Report any spot that is having metal loss (compared to their nominal thickness) so that end user
can take necessary action eg. replace their pipe spool or equipment prior to commission platform.
 BO-B & BO-C Platforms Piping & Equipment Ultrasonic Thickness Baseline Inspection for
Talisman Malaysia Limited in Vietnam (2007).
 BO-A & BO-D Platforms Piping & Equipment Ultrasonic Thickness Baseline Inspection for
Talisman Malaysia Limited in Johore, Malaysia (2008).
Intrusive Erosion (Sand) Monitoring Engineer
Perform installation and setup of sand monitoring system (sand probe, logger, FBM and PC) on
board rigs and platform. Monitor sand rate captured in the software at all time and advice customer
for necessary action.
 Solids and erosion monitoring & analysis during well testing of Kumang A1H, A3 & A4H for
Petronas Carigali Sdn Bhd (2011 to 2012).
 Solids and erosion monitoring & analysis during well testing of Ledang Timur onboard ENSCO 105
for Petronas Carigali Sdn Bhd (2013).
 Solids and erosion monitoring & analysis during well testing of Bujang onboard MAERSK for
Petronas Carigali Sdn Bhd (2012).
 Solids and erosion monitoring & analysis during well testing of Resak for Petronas Carigali Sdn
Bhd (2011).
 Solids and erosion monitoring & analysis during well testing of Wakid onboard Naga-1 for
Petronas Carigali Sdn Bhd (2011).
 Solids and erosion monitoring & analysis during well testing of Well 1 & 2 onboard Great Bongkot
South for PTT Exploration & Production, Thailand (2013).
 Solids and erosion monitoring & analysis during well testing of Kinabalu onboard DD3 for Petronas
Carigali Sdn Bhd (2014).
 Solids and erosion monitoring & analysis during well testing of Zuhal East onboard Naga-4 for
Petronas Carigali Sdn Bhd (2014).
 Solids and erosion monitoring & analysis during well testing of F-14 onboard West Alliance for
Sabah Shell Petroleum Company(2014).
Non-Intrusive Erosion (Sand) Monitoring Engineer
Perform installation and setup of sand monitoring system (sand acoustic probe, CIU and PC) on
board rigs. Monitored sand quantity captured in the software at all time and advice customer for
necessary action.
 Roxar Sand Acoustic Monitoring & Analysis during well testing of well 101, 102, 103 & 104 on F28
for Sarawak Shell Berhad (2012).
Wireless Erosion (Sand) Monitoring Engineer
Carried out survey on the platform to identify best spot to install wireless sand logger in which it
capable to communicate with the wireless gateway at the best radio signal strength index.
Installation, commissioning & Monitoring of wireless sand monitoring system by on PCSB-SBO
Sumandak-A Platform. Carried out monitoring on the sand monitoring regularly.
 Carried out survey, installation and commissioning of wireless sand monitoring system by installed
and setting up the whole devices in the system (2012 to 2013). Provided monitoring & analysis
support after commissioned (2014)
Experience Gained
Page 2 of 4

3. Understanding piping integrity and working with end user towards maximizing pipe lifespan and
minimizing downtime. Mastering the application of wireless and ultrasonic system to be utilized on
corrosion and erosion protection purpose.
EMPLOYMENT HISTORY
Years
Dec 2005
–
July 2007
Company
Matco (M) Sdn. Bhd.
Working as a Technical Sales Engineer, attained experience in the following areas:
• Process the RFQ, ITB of Non Intrusive Sand Monitoring System into PO or SO.
• Propose system setup to fulfil customers’ expectation.
• Present system setup to customer in order to share the idea of having the system and to
comply with customer requirement at site,
• Manage procurement, delivery and logistic of materials and manpower for installation and
commissioning work. Prepare project schedule.
• Installed, commission and monitor sand production on end users’ platforms; Carigali Hess
(2005-2006), Petronas Carigali (2006-2007), ExxonMobil (2006)
• Present report to end user and recommend next action plan to optimize platform production
within the acceptable sand production rate.
• Follow up with customer for any technical and commercials matter.
ON-THE-JOB EXPERIENCE RECORD
• In charge of retrieval and installation of Corrosion Coupon and Probe on Monitoring station in a Process
System, without Shutdown and under full operating Pressure using Retrieval Tool Set
• In charge of weighing of Coupon and laboratory processing of Corroded/ weight loss of Corrosion Coupons
in accordance with NACE standard RP0775-87.
• Expertise in Monitoring and Reporting on erosion severity in the well testing program on rigs and platforms.
Provided recommendation on managing well production based on erosion severity.
• In charge of Installation, Commissioning & Data Management of Wireless Intrusive Sand Monitoring System.
SOFTWARE EXPERIENCE/SKILL
• Familiar with word processing and spreadsheet software.
Page 3 of 4
June
2000 –
Dec 2005
Sime Darby Offshore Engineering Sdn. Bhd. (formerly known as Mecomb Engineering Sdn
Bhd)
Working as Commissioning and Service Engineer, attained experience in the following areas:
• Prepare project schedule upon getting project or service order awarded.
• Prepare and conduct FAT in house.
• Installation, commissioning (SAT) and hand over training to end user.
• Service after sales. Follow up with manufacturer for any rectification or replacement work.
• Products that were carried were topside metering system (SCADA) such as PLC, Flow Computer,
Gas Chromatograph and Man Machine Interface.

4. • Familiar with MultiTrend Software for sand monitoring purposes, Access Database for Corrosion Record.
• Familiar with RP4 Cathodic Protection software
Page 4 of 4