1. Anuraj T.A
Mobile # +919809421114
Email: anurajtacareer@gmail.com
Address: Thachampilli house, Kakkassery post, Thrissur, Kerala-680511
CARRIER OBJECTIVE
To secure a challenging position where I can effectively contribute my skills as a
professional and to have a challenging role that will develop my leadership and
organization skills.
EDUCATION & OTHER DETAILS
• B.Tech: Electronics and Communication Engineering from Govt. College of
Engineering Kannur, Kannur University, 2008-2011; result awaiting.
• Diploma: Maharajas Technological Institute Thrissur, with an aggregate of 62.71%
in Electronics engineering, 2005-2008.
• Plus two: St Joseph’s HSS Pavaratty, with an aggregate of 72.17% in Computer
Science, 2003-2005
• SSLC: St Joseph’s HSS Pavaratty, with an aggregate of 74.67%, 2003
• Certification Course: Pursuing PG Diploma in Embedded System Design at
National Institute Of Electronics and Information Technology
• Additional Qualification: NCC ‘ C ’ Certificate holder
SKILL SET
• Operating Systems: Windows 7/XP , Red Hat Linux , RT Linux , VxWorks
• Programming languages: C, C++,Embedded C, Matlab
• Softwares / IDE: Keil C, MPLab , Code Warrior , Code Composer Studio ,
VMWare , Micro C for PIC, Arduiono C
PROJECTS
• ADVANCED GSM ROBO WITH DUAL MODES OF OPERATION
This project particularly aims at overcoming the limitations of conventional robotic
control system with the help of GSM technology and Digital Image Processing.
The robot can be operated in manual and automated modes. We used
ATMEGA328 micro controller. Automated mode is based on Image processing
and is done by Matlab program.
2. • GSM CONTROLLED ROBO
This is a Pick and Place robot which can be controlled by a mobile using GSM
technology. ATMEGA8 Micro Controller is used in this project. CM8870 DTMF
decoder, L293D motor driver ICs and DC motors are essential part of this project.
• DEVICE CONTROL USING MOBILE PHONE
This project is based on GSM technology. The micro controller used for this
project was 89C51. The DTMF signals corresponding to different keys of mobile
will determine which device is to be operated. The devices are connected to Micro
Controller through relays on the other end.
• ACCIDENT ALARM SYSTEM
PIC 16F877A Micro Controller is used for this project. A GSM modem is
programmed to send an accident alarm according to the data available from three
sensors- temperature sensor, smoke detector and vibration sensor
• ROOM TEMPERATURE MEASUREMENT AND DISPLAY
This is a PIC16F877A Micro Controller based project with the help of a
temperature sensor. The out put voltage of temperature sensor is converted into its
corresponding Celsius value by the program and display the same in a LCD
display.
LINGUISTIC PROFICIENCY
English, Hindi, Malayalam, Sanskrit (Read and Write)
EXTRA CURRICULAR
• Had been the Company Senior Under Officer of 23[k] Bn, 4 th coy MTI NCC unit in
the academic year 2007-2008
• Had been the captain of college cricket team in the academic year 2010-2011
INTERESTS
• Reading, pencil drawing, playing cricket, trekking, watching movies, listening
music
PERSONAL DETAILS
Date of Birth: 20th may 1988
Permanent Address: Thachampilli House, Kakkassery (PO), Thrissur, kerala-680511
![• GSM CONTROLLED ROBO
This is a Pick and Place robot which can be controlled by a mobile using GSM
technology. ATMEGA8 Micro Controller is used in this project. CM8870 DTMF
decoder, L293D motor driver ICs and DC motors are essential part of this project.
• DEVICE CONTROL USING MOBILE PHONE
This project is based on GSM technology. The micro controller used for this
project was 89C51. The DTMF signals corresponding to different keys of mobile
will determine which device is to be operated. The devices are connected to Micro
Controller through relays on the other end.
• ACCIDENT ALARM SYSTEM
PIC 16F877A Micro Controller is used for this project. A GSM modem is
programmed to send an accident alarm according to the data available from three
sensors- temperature sensor, smoke detector and vibration sensor
• ROOM TEMPERATURE MEASUREMENT AND DISPLAY
This is a PIC16F877A Micro Controller based project with the help of a
temperature sensor. The out put voltage of temperature sensor is converted into its
corresponding Celsius value by the program and display the same in a LCD
display.
LINGUISTIC PROFICIENCY
English, Hindi, Malayalam, Sanskrit (Read and Write)
EXTRA CURRICULAR
• Had been the Company Senior Under Officer of 23[k] Bn, 4 th coy MTI NCC unit in
the academic year 2007-2008
• Had been the captain of college cricket team in the academic year 2010-2011
INTERESTS
• Reading, pencil drawing, playing cricket, trekking, watching movies, listening
music
PERSONAL DETAILS
Date of Birth: 20th may 1988
Permanent Address: Thachampilli House, Kakkassery (PO), Thrissur, kerala-680511](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)