2. Determine what a circuit is.
Identify components of the circuit.
Determine the different types of
switches.
Determine the connections or wiring
diagram for lamp controls
3.
4.
5.
6. the very common switch.
its function is simply for turning on
and off a certain load in a circuit.
7. used to control loads in two locations.
used to control loads in more than two
locations when combined with 4-way
switch.
8. it has a common terminal which supplies
the two traveler terminals alternately.
9. has four terminals in which having
contacts alternately.
10. a type of SPST which the actuator is
longer than the ordinary switch.
14. Automatically turns on the light when it
can sense darkness and turns it off when
it is daylight.
15. It has either normally-closed or normally-open
contact.
Automatically returns to its normal position
when the applied force is being released.
16. Allows the user to choose between
neutral or off, manual or forward, and
automatic or reverse.
17. automatically locks when pushed and
has to be twisted to release the lock.
used in machineries where an emergency
buttons has to be installed.
18. a switch having normally close and
open contact which will be triggered
when touched or pressed.
19. a set of two or more switches in as many
circuits operated simultaneously by a single
control.
a number of independent switches side by side
and having a common switch plate