This is a tool that some homeowners have and a tool that most plumbing services carry as part of their tool kit. It is made of metal that is wound into a spiral format, and is flexible. The body of the plumbing snake is normally very thin so it is possible that the body of the snake can be bent to fit into almost any type of drain.
1. Plumbing Snake—What is It?
This is a tool that some homeowners have and a tool that most plumbing services carry as part of
their tool kit. It is made of metal that is wound into a spiral format, and is flexible. The body of
the plumbing snake is normally very thin so it is possible that the body of the snake can be bent
to fit into almost any type of drain. This tool is used to remove clogs from the pipes so the water
can flow through the pipes easily. It is also referred to as a toilet jack or plumber’s snake. In
most cases the plumbing snake entire body is made of sturdy metal that is thin but there are some
manufactures that feature a crank or handle made of plastic that is durable. If it has a handle or
crank this makes it possible to control the progress of the plumbing snake as it makes its way
through the pipe to the clog. The handle or crank also makes it easier to dislodge the clog by
snaring the clog so it can be pulled out of the pip or pushing it through the pipe to dislodge it.
A common application is that the coiled wire of the body of the plumbing snake is also able to
imbed itself into the clog much in the same way that a corkscrew is worked into the cork. Once
it has a firm grasp on the clog you can slowly turn the snake so it is backing out of the pipe until
you have the clog extracted. If the plumbing snake has a handle or crank you would turn those.
It may take more than one time to clear the pipe or drain completely but it depends on what
material the clog is composed of and how big the clog is.
You can also use the plumbing snake body to punch holes in the clog. This will weaken the
structure of the clog and as it starts to break up, the natural flow of water coming through the
pipe will help to carry the smaller clog chunks out of the pie and into the septic tank or sewage
system. Always make sure that you are cleaning the snake before you put it away until you need
it next time. The plumbing snake is good to have around the house as it will often be able to
remove a stubborn clog that will not dislodge by just using a plunger. It will also save you
money on hiring plumbing services to get rid of the clog. You can find them in department and
home improvement stores.
Visit - http://www.middletnplumbing.com