Behaviour Of Different Section Under Stress, Mechanics Of Solids (2130003)

1. Mechanics Of Solids (2130003)
Active Learning Assignment
Topic Name:-“Behaviour Of Different Section Under
Stress”
Guided By:- Prof. Vrajesh Makwana
Name:- Jani Parth U. (150120119051)
Branch:- Mechanical
Div:- A-3

2.  Contet
1.Introduction
2.Type of Material
3.Type of Bars
4.Equation of Deformation For Different Bar By Axial Load
5.Thermal Stress
6.Equation of Deformation FOR Different Bar By Thermal
Load

3.  Introduction

4.  Elastic Limit:- Section There Is Limiting Value Of Force Up And
Within Which The Deformation Entirely Disappears On Removal
Of The Force. The Value Of Stress Corresponding To This
Limiting Force Is Called Elastic Limit.
 Axial Loads:- When Load Is Applied Along The Axis Of The
Member, It Is Called Axial Load. It May Be Tensile Or
Compressive

5. Type of Material

6.  Type of Bars
 Prismatic Bar : A Bar Having Constant Cross Section Throughout Its
Length Called Prismatic Bar
 Non-prismatic Bar :A Bar Which Does Not Have Constant Cross
Section Throughout The Length Is Called Non-prismatic Bar.

7.  Composite Bar : If Cross Section Of Bar Is Made Up Of
Two Or More Different Material, It Is Called Composite
Bar. The Bar May Be Prismatic

8. Equation Of Deformation For Prismatic Bar By Axial
Load

9.  Equation Of Deformation For Non-prismatic Bar (Stepped Bar)

10. Equation of deformation FOR composite BAR

11. Thermal Stress

12. Equation Of Deformation FOR Uniform Bar By Thermal
Stress

13. Equation Of Deformation FOR Stepped Bar By Thermal
Stress