Intratech SP3D DBX export Smart3D model to Navisworks together with Dimension Port (DIMPORT). It enables user to measure piping component just like CAD.

1. How to measure an exact
piping dimension in
Navisworks?
Smart3D DIMPORT Export utility for Navisworks.
Intratech Corp.

2. Why DIMPORT?
• DIMPORT is a reference line for
accurate measuring. They are generated
from Connection Points and Center
position of piping components.
• DIMPORT file can be attached/detached
at any time in Navisworks.
• The purpose of this document is to
demonstrate how to measure accurate
dimension in Naviswork using
Intratech's DIMPORT utility.

3. 90 deg
elbow to 45
deg elbow

4. 90 deg
elbow to 45
deg elbow

5. Elbow to
Elbow –
Lock axis-x

6. Elbow to
Elbow –
lock Z-axis

7. Pipe
centerline
elevation

8. Elbow to
Olet

9. Elbow to
Tee center

10. Tee to
Elbow -
vertical

11. Tee to
Elbow –
Horizontal

12. How to make DIMPORT
file?
1
SP3D
•Run Intratech SP3D DBX
to export NWC
2
Output
•Model.nwc
•Model-Dimport.nwc
3
Navisworks
•Open Model.nwc
•Append Model-
Dimport.nwc
DIMPORTS from Connec
tion Points etc

13. The benefits
• Easy and Accurate piping measuring in Navisworks
• Support Navisworks Freedom® too
• If you need Real Chained Dimensioning, then use Adobe
Reader.
• Intratech’s 3D Apps® 3D PDF Exporter for Navisworks enables
DIMPORT for Adobe reader to dimensioning
• This feature will be released in Q2, 2018
• For more detail,
• mail to info@intra.co.kr / www.intratech3d.com