You have prepared the spread plates below using 0.1 mL from a liquid .pdf

•

0 likes•2 views

You have prepared the spread plates below using 0.1 mL from a liquid culture of E. coli at an unknown concentration. Count the colonies that have grown and use the information, together with the TDF for the corresponding plate, to calculate the average original concentration of your E. coli suspension. Solution to calculate the average original concentration of e.coli suspension, first we need to find out CFU/ML by formula- no. of colonies x dilution factor / volume of culture plate for plate first- TDF-2 x 105, so total number of colony is 12 x ( 2x105) / 0.1 ml = 24x106 second plate TDF is 1 x 106, so CFU/ml is = 6 x 107 so overall average CFU/ml is = 1.5 x 1014 by taking average of both plate sample add both value than divide by 2 so the final outcome is 1.5 x 1014, the final concentration of E.coli suspension is 1.5 x 1014 u/ml..

Education

More from info673628

Describe two traits that represent a sustainable society and two traits of a nonsustainable society. Solution The 2 traits that mainly represent a sustainable society is a meticulous emphasis on “egalitarianism”. This egalitarianism is mainly depicts that the implementation society of formal equality in distribution of wealth and resources as explained below so that another trait is attain a capitalism economic structure & utilitarianism for economic growth in the society. So that, moral equality can be attained with moral values, and ethical based decisions must be implemented within the communities to establish social justice with equality and responsibility. A non-sustainable society is represented by the traits such as use of high amount to non- renewable resources with unequal distribution of resources and possessing ever-cumulative productions of products.

Describe two traits that represent a sustainable societyand two tr.pdf

info673628

Compare Windows Assembly to that of a UNIX system. Solution There is no difference. The assembly code is the same if the processor is the same. x86 code compiled on Windows is binary compatible with x86 code on Linux. The compiler does not produce OS-dependent binary code, but it may package the code in a different format (e.g. PE vs. ELF). The difference is in which libraries are used. In order to use OS stuff (I/O for example) you must link against the operating system\'s libraries. Unsurprisingly, Windows system libraries are not available on a Linux machine (unless you have Wine of course) and vice-versa..

Compare Windows Assembly to that of a UNIX system.SolutionTher.pdf

info673628

Below is the assignment description and the file I have written. I would love to test this file to make sure that everything is satisfied (vector with all modes in ascending order). I\'m having a really hard time constructing a main method to test it. Help!! ------------------------------------------------------- The mode is the value that appears most often in a set of data. Write a function named findMode that takes as parameters an array of int and the size of the array, and returns a vector containing the mode(s). If there is just a single most frequent value, the vector will only contain that one value, but if multiple values tie for maximum frequency, the vector will need to contain all such values. This includes the case where every number in the array appears only once. Each mode should appear only once in the vector. The values in the vector that is returned must be in ascending order. If you need to sort a vector, it\'s similar to sorting an array, but specifying the beginning and end of the vector look a little bit different. If your vector is named result, then it would look like this: \"std::sort(result.begin(), result.end());\". ------------------------------------------------------- #include // needed for the sort() function #include // needed to use the vector type #include // needed for the main function using std::vector; using std::sort; vector findMode(int array[], int size) { int maxFreq = 1; // initalizing the largest frequency to be 1 vector result; // results is an empty vector //Initializing the loop through the integer array for (int i = 0; i < size; i++) { int count = 1; //started the counter at 1 //started the the loop after the 1st entry, looking for matches with the value at index i. for (int j = i + 1; j < size; j++) { //if an entry matches another, then add one to the counter if (array[i] == array[j]) { count++; } } //when the counter is equal to the max frequency, the integer is added to the result vector. if (count == maxFreq) { result.push_back(array[i]); } //when the counter for i is greater than the max frequency, updates the maxFreq, clear the values stored in the result vector, and push the value to the empty vector. if (count > maxFreq) { maxFreq = count; result.clear(); result.push_back(array[i]); } } //sort the modes in ascending order sort(result.begin(), result.end()); return result; Below is the assignment description and the file I have written. I would love to test this file to make sure that everything is satisfied (vector with all modes in ascending order). I\'m having a really hard time constructing a main method to test it. Help!! ------------------------------------------------------- The mode is the value that appears most often in a set of data. Write a function named findMode that takes as parameters an array of int and the size of the array, and returns a vector containing the mode(s). If there is just a single most frequent value, the vector will only contain that one value, but if mult.

Below is the assignment description and the file I have written..pdf

info673628

While bacteria exhibit \"simple cell division\" where the quantity of DNA remains constant following cell production, why would it be incorrect to say they undergo mitosis? Solution The mechanics and sequence of bacterial cell division and mitosis are fairly different.When cells divide by mitosis in an multicellular organism,it causes the organism to grow bigger and replace old cells with new ones.However in case of bacteria,cell division is not just a means of producing new cells instead it is a mechanism of bacerial reproduction.In case of binary fission,the prokaryotc chromosome repicates, then attaches each copy to a different part of the cell membrane. When the cell pulls apart,replicated and original chromosomes are seperated.Cytokinesis then produces two seperate cells. mitosis is a more complex process and takes place in 5 stages: prophase,anaphase,metaphase,telophase,cytokinesis. in binary fission no mitotic spindles are formed. DNA replication takes place at the same time as DNA seperation.Whereas in mitosis DNA is copied during S phase,whereas it is seperated in M phase. Therefore it would be incorrect to say binary fission and mitosis as same..

While bacteria exhibit simple cell division where the quantity o.pdf

info673628

Which of the following items appears on the income statement before income before income taxes? OOther comprehensive income O Discontinued operations. O Comprehensive income. O Other revenues and gains. Solution The following items appear on the income statement before income before income taxes. Other revenues and gains. Explanation:- If the company earns any income from activity other than the main or core operations it is called other revenues and gains. It will be shown in income statement before tax is deducted..

Which of the following items appears on the income statement before i.pdf

info673628

What part of the root is responsible for water and nutrient absorption. Apical meristem root hairs of the epidermis cortex and pith root cap zone of cellular elongation Solution Hi, Answer of your question is : 2.root hairs of the epidermis. Explanation:Because it is responsible for water and nutrients absorption from soil which are important for the plants. I hope my answer is satisfactory. Thanks!!.

What part of the root is responsible for water and nutrient absorptio.pdf

info673628

What is the purpose of the balance sheet? Be sure to discuss the three key elements that make up the balance sheet. URGENT: NEED ANSWER ASAP PLEASE RESPOND WITH COPY AND PASTE, NOT ATTACHMENT USE ORIGINAL CONTENT NOT USED BEFORE ON CHEGG PLEASE ANSWER THROUGHLY TO ALL ANSWER TO BEST ABILITES ORIGINAL SOURCE NEVER USED BEFORE!!! Solution A balance sheet is a financial statement which represents the worth of the company and its business at a given point in time. The Balance sheet details what it owns and to whom it owns to. The purpose of the Balance Sheet is to show the break up of the total assets between the outsider liabilities and owners\' equity at a point of time. The balance sheet of a company has three key elements, which are : (1) Assets, which includes all the current and long-term assets or fixed assets which the company owns, (2) Liabilities, which includes the current and long-term liabilities payable to the outsiders by the company, (3) Shareholders\' equity, it constitutes all that belongs to the Shareholders who are the legal owners of the company, which includes equity capital and retained earnings. The total of its assets is equal to the sum of the Shareholders\' equity alongwith the Liabilities..

What is the purpose of the balance sheet Be sure to discuss the thr.pdf

info673628

What is culture? Why should culture play a role in aiding our understanding of leadership? Solution Culture is the unique characteristics and knowledges or a particular group of people, defined by their lenguage, cuisine, social habits, art, relgion, music etc. Culture play an important role on helping us understand leardership because culture define us as people, depending where you are from will determinate the way you behaive and how you intereact with others. When you are the manager of a group that has huge diversity among its member it is important to understand what motivates each of your employees, you can not assume they all will be motivated the same, it will depend on their culture..

What is culture Why should culture play a role in aiding our unders.pdf

info673628

What are the Federal Reserve\'s major assets and liabilities? What are the relative amounts of each (currently...July 2018)? Solution Federal reserves assets are Gold reserves,Special drwing rights, reserves position in international monetary fund and foreign currencies. Federal reserves liabilities are Federal resrve nbotes, deposits made by depository institutions, the U.S. Treasury, and others hold in accounts at the Federal Reserve Banks. Couldn;t get the data on liabilities. Best of Luck. God BlessAsset in millions of dollars18-AprMay 2018/p1Total1245401228442Gold stock111041110413Special drawing rights2 352402516564Reserve position in International Monetary Fund2 517708175565Foreign Currencies44338942591.

What are the Federal Reserves major assets and liabilities What a.pdf

info673628

Use whichever properties (associative and/or communities) are necessary to simplify each expression. (2+n)+9 (5+x+3)+2 Use whichever properties (associative and/or communities) are necessary to simplify each expression. (2+n)+9 (5+x+3)+2 (2+n)+9 (5+x+3)+2 Solution (2+n) +9 =9+(2+n).... commutative property =(9+2)+n ......associative property =11+n Answer (5+x+3)+2 =2+(5+x+3) commutative property =(2+5) +(x+3) associative property =7+ (x+3) =(7+3)+x associative property =10+x Answer ***********.

Use whichever properties (associative andor communities) are nece.pdf

info673628

Use a 5 significance level unless specified otherwise.Please give.pdf

info673628

two children own two-way radios that have a maximum range of 2 miles.Once leaves a certain point at 1:00 pm. Walking due north at a rate of 4 mi/hr. The other leaves the same point at 1:15 pm. Travling due south at 6 mi/hr. When will they be unable to communicate with each other? Solution Time when the first child leaves (T1) =1:00 pm Speed of first child (S1) = 4 mi/hr Time when second child leaves (T2) = 1:15 pm Speed of second child (S2) = 6 mi/hr Time elapsed until second child leaves=T2-T1=15 minutes Distance travelled by first child in that time=s1*15 minutes =4 mi/hr * (1/4)hr =1 mile Range of radio=2 miles Distance between children at 1.15 pm = 1 mile Remaining range=1 mile first child and second child are moving in opposite directions hence both distances must be considered s=d/t => d=t*s (distanceNorth)+(distanceSouth)=1 mile t(S1)+t(S2)=1 mile t(S1+S2)=1 mile t(4+6)=1 t(10)=1 t=1/10 hour=60/10 minutes=6 minutes Thus,10 minutes later the remaining range of 1 mile would also be passed. Time at that moment = 1.15+6 minutes = 1:21 pm.

two children own two-way radios that have a maximum range of 2 miles.pdf

info673628

The place within an enzyme where a substrate binds is called the ATP site Active site Key hole Transition site If t for two different polypeptides some of their R groups come together to hold both polypeptides together in a certain 3-dimentional shape. Which level of protein structure would this describe? primary structure secondary structure tertiary structure quaternary structure In DNA what nitrogenous base complementanly pairs with T (thymine)? Solution 14. Active site the active site is the region of an enzyme where substrate molecules bind and undergo a chemical reaction. 15. Quaternary structure (quaternary structures arise when a protein is made up of two or more polypeptide chains).

The place within an enzyme where a substrate binds is called the ATP.pdf

info673628

// READ BEFORE YOU START: // Please read the given Word document for the project description with an illustrartive diagram. // You are given a partially completed program that creates a list of dogs for an adoption shelter. // Each dog has the corresponding information: name, breed, and a linked list of checkups. // Please read the instructions above each required function and follow the directions carefully. // If you modify any of the given code, return types, or parameters, you risk failing test cases. // // Note, Textbook Section 2.10 gives a case study on complex linked list operations. // This project is based on that case study. Make sure you read the code in section 2.10. // The following will be accepted as input in the following format: \"name:breed\" // Example Input: \"Spot:Terrier\" or \"Daisy:Poodle\" // Valid name: String containing alphabetical letters beginning with a capital letter // Valid breed: String containing alphabetical letters beginning with a capital letter // Valid date: String in the following format: \"MM/DD/YYYY\" ex: \"01/01/2010\" // All input will be a valid length and no more than the allowed number of dogs will be added to the linked list. #include #include #include #include // included to check for memory leaks #define CRTDBG_MAP_ALLOC #include #pragma warning(disable: 4996) // used to create a linked list of containers, each contaning a \"dog\" struct container { struct dog *dog; struct container *next; } *list = NULL; // used to hold dog information and linked list of \"checkups\" struct dog { char name[30]; char breed[30]; struct checkup *checkups; }; // used to create a linked list of checkups containing \"dates\" struct checkup { char date[30]; struct checkup *next; }; // forward declaration of functions that have already been implemented void flush(); void branching(char); void helper(char); void remove_all(struct container*); void display(struct container*); // the following forward declarations are for functions that require implementation // return type // name and parameters // points void add_dog(char*, char*); // 5 struct dog* search_dog(char*); // 5 void add_checkup(char*, char*); // 10 char* last_checkup(char*); // 15 void remove_one(char*); // 15 // Total: 50 points for hw07 struct container* list_of_breed(char*); // 25 struct container* list_by_name(); // 25 // Total: 50 points for hw08 int main() { char ch = \'i\'; printf(\"Dog Adoption Center\ \ \"); do { printf(\"Please enter your selection:\ \"); printf(\"\\ta: add a new dog to the list\ \"); printf(\"\\ts: search for a dog on the list\ \"); printf(\"\\tr: remove a dog from the list\ \"); printf(\"\\tc: add a checkup date for dog\ \"); printf(\"\\tl: display last checkup for a dog\ \"); printf(\"\\tn: display list of dogs by name\ \"); printf(\"\\tb: display list of dogs of breed\ \"); printf(\"\\tq: quit\ \"); ch = tolower(getchar()); flush(); branching(ch); } while (ch != \'q\'); remove_all(list); list = NULL; _CrtDumpMemoryLeaks(); .

READ BEFORE YOU START Please read the given Word document fo.pdf

info673628

Refer to the table below. A student creates the table above as a study guide. Evaluate the accuracy of the information shown. The information is not accurate because the anterior air sacs push air when they expand and pull air when then contract. The information is not accurate because air sacs expand during exhalation and contract during inhalation. The information shown is accurate. The information is not accurate because air does not flow through the lungs during exhalation. Solution The information shown is accurate. During inhalation, the posterior air sacs expand and the air is filled in posterior air sac and lungs and air fills in the anterior sac. Both the sacs expand during inhalation. During exhalation, both the sacs contracts and pushes air from posterior sac through lungs and from anterior sacs to outside the body..

Refer to the table below. A student creates the table above as a stu.pdf

info673628

prove the followings: 1- every subset of a finite set is finite 2- if s is denumerable, then s is equinumerous with a proper subset of itself Solution Post one more question to get the answer to the second problem. Thanks Proof using induction: 1) Base Case (n=1) There is only one element in the finite set, then we can write it as X \\ a = Phi, since there won\'t be any element in the set if we removing phi, hence the phi is a finite set since it contains only one element and this is an empty element 2) Let us assume that the solution is true for (n=k), i.e. for an finite set with k elements, every subset of that set will be finite 3) Now we need to prove our hypothesis for the set containing (k+1) elements Let us assume that X has (k+1) elements if Y is a subset of X, then it will have atmost k+1 elements, which is equal to X Since X is finite, therefore Y will also be finite Otherwise, there exists an element that belong to X but not to Y a belongs to X\\Y => it implies that Y is a subset of X\\ a This set contain max n elements, hence the Y will be finite.

prove the followings1- every subset of a finite set is finite2-.pdf

info673628

Problem 9-4 Nonconstant growth valuation Hart Enterprises recently paid a dividend, DO of $1.00. It expects to have nonconstant growth of 14% for 2 years followed by a constant rate of 4% thereafter. The m s required return is 16% a. How far away is the horizon date? I. The terminal, or horizon, date is infinity since common stocks do not have a maturity date. II. The terminal, or horizon, date is Year 0 since the value of a common stock is the present value of all future expected dividends at time zero III. The terminal, or horizon, date is the date when the growth rate becomes nonconstant. This occurs at time zero. IV. The terminal, or horizon, date is the date when the growth rate becomes constant. This occurs at the beginning of Year 2. V. The terminal, or horizon, date is the date when the growth rate becomes constant. This occurs at the end of Year 2. Select- b. What is the firm\'s horizon, or continuing, value? Round your answer to two decimal places c. What is the firm\'s intrinsic value today, Po? Round your answer to two decimal places. Solution Answer a. The terminal, or horizon, date is the date when the growth rate becomes constant. This occurs at the end of Year 2. Answer b. D0 = $1.00 Growth rate for next 2 years is 14%, followed by an constant growth rate (g) of 4% D1 = $1.00 * 1.14 = $1.14 D2 = $1.14 * 1.14 = $1.2996 D3 = $1.2996 * 1.04 = $1.3516 Required return, r = 16% Horizon Value of Firm = D3 / (r - g) Horizon Value of Firm = $1.3516 / (0.16 - 0.04) Horizon Value of Firm = $11.26 Answer c. Intrinsic Value of Firm = $1.14/1.16 + $1.2996/1.16^2 + $11.26/1.16^2 Intrinsic Value of Firm = $10.32.

Problem 9-4 Nonconstant growth valuation Hart Enterprises recently pa.pdf

info673628

Please type the answer 4. What government entity is primarily in charge of regulating banks? What government entity regulates mutual funds? (2 points) Solution Bank Regulator (i) Board of Governors of the Federal Reserve System- It regulates state chartered banks and trust companies that belong to the Federal Reserve System. (ii) Federal Deposit Insurance Corporation- It regulates state chartered banks that do not belong to the Federal Reserve System. (iii) Office of the Comptroller of Currency- It regulates banks that have the word \"National\" in or the letters \"N.A.\" after their names Mutual Fund Regulator = U.S. Securities and Exchange Commission.

Please type the answer 4. What government entity is primarily in.pdf

info673628

On the basis of the presence of the appendix, what might you infer about dietary habits of our evolutionary antecedents? Solution The main function of the appendix is to hydrolyze cellulose and indigestible plant material but it is present in mammals that includes rodents and primates which are not eating cellulose as food souce but may be in past they used to eat that so still it is there, Although there is no main function of this organ and known as vestigial organ but there is some report that it having some role in immune system. Some herbivorous animals, such as rabbits, have a terminal vermiform appendix..

On the basis of the presence of the appendix, what might you infer ab.pdf

info673628

Name 4 functions of matrix in composite materials Name 4 functions of matrix in composite materials Name 4 functions of matrix in composite materials Name 4 functions of matrix in composite materials Solution Matrix is binding in nature and homegenoeus material. In compostie materials, it gives the medium for holding, joining different strucutre in composite material. It is continuous. It gives the protection for inner parts from the natural forces..

Name 4 functions of matrix in composite materials .pdf

info673628

More from info673628 (20)