Many good reasons for the use of IO-Link in your production.

1. Many good reasons
for the use of IO-Link
in your production.
www.ifm.com/gb/io-link
Industrialcommunication
years
W
ARRANTY
on ifm produ
cts

2. Gesamtkatalog EN 2015_Stilvorlage LK FrutigerOT_2010 DE_GB.qxd 17.11.14 12:50 Seite 3

3. 2
IO-Link in production.
Point-to-point connection
without addressing.
Simplicity
Automatic parameter setting.
Automated machine adjustment.
Flexible remote parameter setting.
Automatic parameter management.
Cost savings due to offline parameter setting.
Parameter
setting
The benefits of IO-Link...

4. 3
Easy replacement of units: can be done
by anyone without special knowledge.
Adjustment to different media and recipes.
Shorter and trouble-free retro-fitting times
ensuring increased machine uptime.
No crawling or climbing required
to set the sensor.
“Plug and play” unit replacement: can be done
by anyone without special knowledge.
Manufacturer-independent tool
for all IO-Link units.
...and your advantage with ifm.

5. 4
IO-Link in production.
Observing and using sensor
and machine data.
Measurement
Cost savings in comparison to
units with analogue signal.
Reduction of sensor versions.
Backwards compatible.
Savings
Digital data transmission.
The benefits of IO-Link...

6. 5
Continuous monitoring of energy efficiency,
condition-based maintenance.
Transfer of measured values (EMC) is more
immune to interference in comparison to
analogue transfer. No conversion losses.
No pipe length calibration. More accurate
measured values allow energy savings due to
more accurate process regulation control.
Reduced spare-parts inventory.
In older installations, IO-Link sensors
can be used as usual via switching or
analogue signal.
...and your advantage with ifm.
Simply scan the QR code to find
out more about ifm and IO-Link.
www.ifm.com/gb/io-link

7. 6
IO-Link in production.
Standard connection cables
(e.g. M12, M8, unscreened).
Wiring
Diagnostics.
Plant transparency,
preparation for Industry 4.0.
Protection.
Production
The benefits of IO-Link...

8. 7
Existing wiring can still be used.
Sensor detects states outside the
normal operating behaviour.
This enables condition-based maintenance
for a higher machine uptime.
Continuous communication from the sensor
to ERP, e.g. SAP.
This allows long-term process optimisation.
Protection against tampering:
operating buttons can be disabled.
...and your advantage with ifm.
PLC
ERP

9. IO-Link –
the path towards industry 4.0
TCP/IP
Machine
infrastructure
IT infrastructure
IO-Link master
Modbus-TCP
Learn more?
Go to
www.ifm.com/gb/io-link
PLC

10. Visit our website:
www.ifm.com
ifm electronic gmbh
Friedrichstraße 1
45128 Essen
Tel. +49 / 201 / 24 22-0
Fax +49 / 201 / 24 22-1200
E-mail info@ifm.com
Over 70 locations worldwide –
at a glance at www.ifm.com
Position sensors
Sensors for
motion control
Industrial imaging
Safety technology
Process sensors
Condition monitoring
systems
Industrial
communication
Identification systems
Systems for
mobile machines
Connection
technology
Overview
ifm product range:
Accessories
ifmarticleno.78001663·Wereservetherighttomaketechnicalalterationswithoutpriornotice.·PrintedinGermanyonnon-chlorinebleachedpaper.08/15