SlideShare a Scribd company logo
1 of 8
Download to read offline
http://www.iaeme.com/ijmet/index.asp 73 editor@iaeme.com
International Journal of Mechanical Engineering and Technology (IJMET)
Volume 6, Issue 12, Dec 2015, pp. 73-80, Article ID: IJMET_06_12_008
Available online at
http://www.iaeme.com/IJMET/issues.asp?JType=IJMET&VType=6&IType=12
ISSN Print: 0976-6340 and ISSN Online: 0976-6359
© IAEME Publication
METAL HYDRIDE BASED COOLING
SYSTEMS
Rahul K. Menon
Department of Mechanical Engineering, Maharashtra Institute of Technology,
Pune, Maharashtra, India
ABSTRACT
In recent years, a lot of attention has been directed towards metal
hydrides. The reason being their ability to store hydrogen. Many attempts
have been made to develop metal hydride based heating and cooling systems.
The possibility to utilize low temperature heat (waste heat) to drive these
systems has great potential, helping to reduce to pollution if implemented.
Major applications are seen in air conditioning and heat supply for buildings
and in air conditioning of automobiles. Although this technology offers the
possibility to increase the energy efficiency of a car (by utilizing waste heat)
and consequently reduces the CO2 emissions, its weight specific cooling
power has so far been the main obstacle for an automotive application .In this
paper, an overview of the operating principles and working of metal hydride
based cooling systems; together with the material characteristics relevant to
efficient operation of such devices are discussed.
Key words: Air-Conditioning, Metal Hydride, PCT, Sorption, Thermal
Cooling
Cite this Article: Rahul K. Menon. Metal Hydride Based Cooling Systems,
International Journal of Mechanical Engineering and Technology, 6(12),
2015, pp. 73-80.
http://www.iaeme.com/currentissue.asp?JType=IJMET&VType=6&IType=12
1. INTRODUCTION
Prices for energy supply have seen a steady increase over the years. This along with
the expected global warming are heavily discussed issues about our future energy
system and its economic and ecological price. The constant economic growth of
industrial and especially of developing countries combined with the fast increasing
population in these areas are crucial facts that increase the necessity for a rational use
of all available forms of energy. Increased energy efficiency could tackle national
emission or consumption targets without fearing the loss or reduction of living and
comfort standards.
Rahul K. Menon
http://www.iaeme.com/ijmet/index.asp 74 editor@iaeme.com
Also there were two main drawbacks with the existing system:
 The mobile air conditioning system is not completely leak tight and the refrigerant
emissions cause pollution and global warming on a large scale.
 The compression of refrigerant vapor demands mechanical energy from the engine
and consequently increases the overall fuel consumption along with the
corresponding CO2 emissions of the vehicle.
The general operation principle of metal hydride based sorption system is a closed
operation cycle that utilizes hydrogen as working fluid. The underlying principle is
the thermally driven compression of the working fluid (hydrogen) and its reaction
with the metal hydride at different pressure.
2. METAL HYDRIDES
Metal hydrides are metals which have been bonded to hydrogen to form a new
compound. Generally the bond is covalent in nature, but some hydrides are formed
from ionic bonds. It is the combination of a metal lattice with a hydrogen molecule.
Many kinds of metals or alloys can react reversibly with a large amount of hydrogen
under certain conditions. The products of the forward reaction are called metal
hydrides (MH), and the reaction can be written as;
Msolid + x/2 H2 gas ↔ MHxsolid + heat
The chemical reaction of hydrogen and metal powder to form a metal hydride is
given by the overall equation where M denotes any kind of metal or alloy able to
absorb hydrogen (H2), MHx the corresponding metal hydride and ΔH the enthalpy of
the reaction. It can be regarded as a reversible process and according to the principle
of Le Chatelier-Braun, a pressure increase shifts the equilibrium to the right
(hydrogen is absorbed), whereas a temperature increase shifts it to the left. A release
of hydrogen (desorption) from the metal hydride is therefore possible by either
reducing the hydrogen pressure or increasing the temperature. As the hydrogen
absorption is generally exothermic, the endothermic desorption tends to cool the metal
powder.
The MH materials have widely attracted attention since the successful
development of some members with great potential for hydrogen storage, such as
LaNi5, TiFe and Mg2Ni. Moreover, after years of study, the applications of MH have
been much extended.
e.g. separation/purification of gas mixtures with hydrogen isotopes , heat pumping
from low to high temperature , periodical heat storage and the thermal compression of
hydrogen . Generally the MH related applications share the common advantages of
being environmentally benign, compact and flexible for various operating conditions.
Metal hydrides (MH) possess several superiorities to other hydrogen storage
media in several aspects such as safety and compact storage. Metal hydrides display
very high volumetric storage densities, typically 100 to 120 grams of hydrogen per
liter. A lot of heat is released during hydrogen absorption process, whereas much heat
is absorbed during hydrogen desorption process. A continuous cycle of adsorption and
desorption is used to provide the required cooling.
The stability (dissociation pressure) of the metal hydride phase is one important
issue for its applicability. Technically relevant pressure and temperature conditions of
the metal-hydrogen reaction depend on the desired application but can be typically
assumed as p ≈ 1 – 100 bar and T ≈ 240 – 750 K, respectively.
Metal Hydride Based Cooling Systems
http://www.iaeme.com/ijmet/index.asp 75 editor@iaeme.com
2.1. Mechanism of H2 movement through the metal crystal lattice
The H2 molecule is first weakly physisorbed on the surface and the chemisorbed as
strongly bound, individual H-atoms. The size of the hydrogen atoms is lighter and
smaller than the metal atoms; therefore, they diffuse quickly from the surface into the
periodic sites in the metal crystal lattice
Figure 1 Movement of hydrogen molecules
2.2. Selection of Alloys
The performance of the MH systems largely depends on the properties of the metal
hydrides selected. They should have high COPs and high specific power outputs, i.e.
in case of refrigerator air-conditioner, specific cooling power (SCP). They should be
compact in design, i.e. low mass and/or low volume, have a long life and low
performance degradation, and they should be economic. Therefore, metal hydrides
used for MHHCS should respectively have suitable properties, e.g. high enthalpy of
formation, low specific heat, and high hydrogen absorption capacity, fast reaction
kinetics, favorable equilibrium pressures, low hysteresis, flat plateau, simple
activation process, minimum degradation after cyclic operation, low cost, etc. There
is a plethora of metal hydrides which are potentially suitable.
2.3. Preparation
Figure 2 Preparation of Metal Hydride alloys
Rahul K. Menon
http://www.iaeme.com/ijmet/index.asp 76 editor@iaeme.com
3. PRESSURE COMPOSITION TEMPERATURE (PCT)
PROFILES
PCT measurements of available alloys are necessarily the first steps of a sorption
system design as they reveal the metal hydride properties that consequently define the
working conditions of the system. Even though experimental data are available for a
variety of metal hydride alloys, a detailed examination of the respective metal hydride
characteristics is important. Especially hysteresis, plateau pressure and slope depend
on the compositions of the used misch metal (= Mm, mainly Cr and La) or the
respective production processes and are only to a certain extent predictable.
Basically, PCT is determined by keeping an alloy sample at constant temperature
and measuring the pressure change as hydrogen is absorbed. The hydride/dehydride
cycling causes a change of the inter-metallic compounds volume that cause cracking
for the particles. This cracking of the particles cause increasing of the surface area,
which leads to an increase of the hydrogen reactivity
Most metal have high attraction for hydrogen and there are also few have poor
attraction for hydrogen and the reaction between the metal and hydrogen can be
exothermic or endothermic respectively. The process of absorption and desorption is
best illustrated by the pressure composition-temperature profiles (PCT curves)
Figure 3 Sample PCT diagram of a metal hydride
There are three important parameters that can be obtained from a PCI measurement:-
 Effective storage capacity for storage systems.
 Hysteresis, which is an important characteristic. The hysteresis should be as low as
possible as it reduces the efficiency of the system.
 Plateau slope, which is the equilibrium pressure in the middle of the plateau.
Metal Hydride Based Cooling Systems
http://www.iaeme.com/ijmet/index.asp 77 editor@iaeme.com
Figure 4 PCT parameters depicted
Thermodynamic behavior of metal hydride formation is illustrated in the figure,
which is a PCT curve. The line of the upper pressure represents the absorption process
and the lower line represents the desorption process and the flat part of both lines is
called Plateau. And the difference in equilibrium pressures between the absorption
and desorption reactions is called Hysteresis.
4. SORPTION COOLING SYSTEM CONFIGURATION
Theoretically, it is possible to develop a large number of different schemes for
sorption cooling systems. However, practical considerations like pressure and
temperature levels, internal heat and mass exchange area, cost and properties of the
working fluids limit the number of practically feasible schemes. A typical
configuration is described here:
The system comprises of reactors with metal hydrides A and B. There are
particular properties of metal hydrides of A and B which are very important. Let us
consider A1, A2 to be HT (High temperature) reactors or regeneration alloys and B1,
B2 to be LT (Low temperature) reactors or refrigeration alloys. A1 and A2 are filled
with metal hydride A while B1 and B2 are filled with metal hydride B. The major
difference between the HT and LT reactors is that HT reactors absorb hydrogen at
room temperatures and desorbs at high temperatures while LT reactors absorb
hydrogen at room temperatures and desorbs at low temperatures.
In practice a heat recovery of about 40% is possible. Cooling temperatures of
10°C to -50°C can be obtained with the single stage system.
Rahul K. Menon
http://www.iaeme.com/ijmet/index.asp 78 editor@iaeme.com
5. WORKING
Figure 5 Process flow diagram of first half cycle
Figure 6 Process flow diagram of second half cycle
 There are two types of reactors: HT(High temperature) and LT (Low temperature)
 The reactors are made to undergo a process known as activation which involves
infusing hydrogen in the reactors.
 HT reactors absorb hydrogen at room temperatures and desorbs at high temperatures.
 LT reactors absorb at room temperatures and desorbs at low temperatures.
 Hot exhaust is passed to the HT reactor and the reactor desorbs hydrogen gas.
 The gas travels to the LT reactor and ambient air is passed.
 The LT reactor absorbs the hydrogen in an exothermic reaction.
 This process continues until there is a concentration difference between the HT and
LT reactor.
 In the next half cycle ambient air is passed to the LT reactor and the reactor desorbs
hydrogen gas in an endothermic reaction.
 During this process the temperature of the air is reduced and is passed on to the user.
 The hydrogen travels back to the HT reactor which absorbs the hydrogen in the
presence of ambient air.
Metal Hydride Based Cooling Systems
http://www.iaeme.com/ijmet/index.asp 79 editor@iaeme.com
 This process continues until there is a concentration difference between the HT and
LT reactor.
 In the next half cycle the reactors are interchanged. These two cycles are repeated
over and over to provide the necessary cooling
6. ADVANTAGES
 Improved fuel efficiency
 Proper utilization of a waste commodity and turning it into something useful.
 Traditional refrigerants can be avoided.
 Less pollution and hence reduced global warming.
 Decreases carbon footprint of vehicles.
 Hydrogen is a renewable source of energy; hence we don’t have to worry about its
depletion.
7. CONCLUSION
Metal hydrides are promising working materials for thermally driven solid sorption
cooling machines with hydrogen as working fluid. The systems can cover a wide
range of operating temperatures from cryogenic applications to comfort air
conditioning. A variety of heat sources from solar heat to automobile exhaust gases
can be used to drive the cooling systems. In recent years various designs of such
machines have been successfully demonstrated on a laboratory model or prototype
scales. In fact, these can be most appropriate for small capacity portable or mobile
cooling applications.
REFERENCES
[1] P.Muthukumar,M.Groll; Erratum to “Metal hydride based heating and cooling
systems: A review”;International Journal of Hydrogen Energy 35 (2010) 3817-
3831
[2] Feng Win,Jiangping Chen,Manqi Lu,Zhiju Chen, Yimin Zhou,Ke Yang
;”Development of a metal hydride refrigeration system as an exhaust gas-driven
automobile air conditioner”;Renewable Energy 32 (2007)
[3] Marc Linder;”Automotive Cooling Systems based on Metal Hydrides”; Institute
of Nuclear Technology and Energy Systems, University of Stuttgart,2010
[4] J.Paya,M.Linder,E.Laurien,J.M.Corberan;”Dynamic model and experimental
results of a thermally driven metal hydride cooling system”;International Journal
of Hydrogen Energy 34 (2009) 3173-3184
[5] Ch.Veeraju, M.Ram Gopal; “ Heat and mass transfer studies on plate fin-and-
elliptical tube metal hydride reactors”; Applied Thermal Engineering 30 (2010)
[6] Fusheng Yang, Zaoxiao Zhang;” Simulation Studies on the Coupling Process of
Heat/Mass Transfer in a Metal Hydride Reactor”; Xi’an Jiaotong
University,P.R.China M. Chandra Sekhar Reddy., Thermal Analysis of A Heat
Sink For Electronics Cooling, International Journal of Mechanical Engineering
and Technology, 6(11), 2015, pp. 145 - 153
[7] F.S. Yang,G.X.Wang,Z.X.Zhang,X.Y.Meng, V.Rudolph;” Design of the metal
hydride reactors- A review on the key technical issues”; International Journal of
Hydrogen Energy 35 (2010) 3832-3840
Rahul K. Menon
http://www.iaeme.com/ijmet/index.asp 80 editor@iaeme.com
[8] F.Laurencelle,J.Goyette; “ Simulation of heat transfer in a metal hydride reactor
with aluminium foam”; International Journal of Hydrogen Energy 32 (2007)
2957-2964
[9] Zewei Bao,Fusheng Yang,Zhen Wu,Serge Nyallang Nyamsi,Zaoxiao Zhang;”
Optimal design of metal hydride reactors based on CFD-Taguchi combined
method”; Energy Conversion and Management 65 (2013)
[10] Giridhara Babu Y., Ashok Babu T.P., Anbalagan M. and Meena R., Experimental
and Numerical Investigation of Adiabatic Film Cooling Effectiveness Over The
Compound Angled Gas Turbine Blade Leading Edge Model, International
Journal of Mechanical Engineering and Technology, 5(9), 2014, pp. 91-100.
[11] Groll,M., H.-P.Klein and S.Srinivasa Murthy;” Metal Hydride based Thermal
Systems: A Review”; World Renewable Energy Congress -VII; Cologne,
Germany, 29 June- 5 July, 2002.
[12] Kapil Chopra, Dinesh Jain, Tushar Chandana, Evaluation of Existing Cooling
Systems For Reducing Cooling Power Consumption, International Journal of
Mechanical Engineering and Technology, 3(2), 2012, pp. 210 - 216.

More Related Content

What's hot

technology used for storage of liquid hydrogen
technology used for storage of liquid hydrogentechnology used for storage of liquid hydrogen
technology used for storage of liquid hydrogenbipin singh gariya
 
PERFORMANCE ANALYSIS OF HYDROGEN FUELED INTERNAL COMBUSTION ENGINE
PERFORMANCE ANALYSIS OF HYDROGEN FUELED INTERNAL COMBUSTION ENGINEPERFORMANCE ANALYSIS OF HYDROGEN FUELED INTERNAL COMBUSTION ENGINE
PERFORMANCE ANALYSIS OF HYDROGEN FUELED INTERNAL COMBUSTION ENGINEijsrd.com
 
PLANT DESIGN FOR MANUFACTURING OF HYDROGEN BY STEAM METHANE REFORMING (SMR)
PLANT DESIGN FOR MANUFACTURING OF HYDROGEN BY STEAM METHANE REFORMING (SMR)PLANT DESIGN FOR MANUFACTURING OF HYDROGEN BY STEAM METHANE REFORMING (SMR)
PLANT DESIGN FOR MANUFACTURING OF HYDROGEN BY STEAM METHANE REFORMING (SMR)Priyam Jyoti Borah
 
Applied Hydrogen Slide Presentation 3.12.08
Applied Hydrogen Slide Presentation  3.12.08Applied Hydrogen Slide Presentation  3.12.08
Applied Hydrogen Slide Presentation 3.12.08fredyornath
 
Hydrogen storage
Hydrogen storage Hydrogen storage
Hydrogen storage ajay singh
 
sufficient method of hydrogen production by water gas shift reactions
sufficient method of hydrogen production by water gas shift reactions sufficient method of hydrogen production by water gas shift reactions
sufficient method of hydrogen production by water gas shift reactions MUKULsethi5
 
Hydrogen Production
Hydrogen ProductionHydrogen Production
Hydrogen Productionchrisd
 
“Optimal performance and Analysis on 4-S Si and CI Engine Fueled with HHO Gas...
“Optimal performance and Analysis on 4-S Si and CI Engine Fueled with HHO Gas...“Optimal performance and Analysis on 4-S Si and CI Engine Fueled with HHO Gas...
“Optimal performance and Analysis on 4-S Si and CI Engine Fueled with HHO Gas...iosrjce
 
Hydrogen as a fuel in future
Hydrogen as a fuel in futureHydrogen as a fuel in future
Hydrogen as a fuel in futureGaurav sahay
 
Presentation (Hydrogen)
Presentation (Hydrogen)Presentation (Hydrogen)
Presentation (Hydrogen)student
 
Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)
Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)
Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)guesta70415
 
Mitacs hydrofuel-uoit comparative assessment of nh3 production and utilizatio...
Mitacs hydrofuel-uoit comparative assessment of nh3 production and utilizatio...Mitacs hydrofuel-uoit comparative assessment of nh3 production and utilizatio...
Mitacs hydrofuel-uoit comparative assessment of nh3 production and utilizatio...Steve Wittrig
 
Comparison Of Corrossion Resistance Of Copper For Samples
Comparison Of Corrossion Resistance Of Copper For SamplesComparison Of Corrossion Resistance Of Copper For Samples
Comparison Of Corrossion Resistance Of Copper For SamplesIRJESJOURNAL
 
Development of Aqueous Electrolytes and Corrosion Inhibitors in Aluminium-Air...
Development of Aqueous Electrolytes and Corrosion Inhibitors in Aluminium-Air...Development of Aqueous Electrolytes and Corrosion Inhibitors in Aluminium-Air...
Development of Aqueous Electrolytes and Corrosion Inhibitors in Aluminium-Air...Conferenceproceedings
 
Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...
Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...
Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...Pawan Kumar
 
An Assessment of Phase Change Materials for Domestic Applicatons
An Assessment of Phase Change Materials for Domestic ApplicatonsAn Assessment of Phase Change Materials for Domestic Applicatons
An Assessment of Phase Change Materials for Domestic ApplicatonsEditorIJAERD
 

What's hot (19)

technology used for storage of liquid hydrogen
technology used for storage of liquid hydrogentechnology used for storage of liquid hydrogen
technology used for storage of liquid hydrogen
 
PERFORMANCE ANALYSIS OF HYDROGEN FUELED INTERNAL COMBUSTION ENGINE
PERFORMANCE ANALYSIS OF HYDROGEN FUELED INTERNAL COMBUSTION ENGINEPERFORMANCE ANALYSIS OF HYDROGEN FUELED INTERNAL COMBUSTION ENGINE
PERFORMANCE ANALYSIS OF HYDROGEN FUELED INTERNAL COMBUSTION ENGINE
 
PLANT DESIGN FOR MANUFACTURING OF HYDROGEN BY STEAM METHANE REFORMING (SMR)
PLANT DESIGN FOR MANUFACTURING OF HYDROGEN BY STEAM METHANE REFORMING (SMR)PLANT DESIGN FOR MANUFACTURING OF HYDROGEN BY STEAM METHANE REFORMING (SMR)
PLANT DESIGN FOR MANUFACTURING OF HYDROGEN BY STEAM METHANE REFORMING (SMR)
 
Alane for hydrogen storage and delivery
Alane for hydrogen storage and deliveryAlane for hydrogen storage and delivery
Alane for hydrogen storage and delivery
 
Applied Hydrogen Slide Presentation 3.12.08
Applied Hydrogen Slide Presentation  3.12.08Applied Hydrogen Slide Presentation  3.12.08
Applied Hydrogen Slide Presentation 3.12.08
 
Hydrogen storage
Hydrogen storage Hydrogen storage
Hydrogen storage
 
sufficient method of hydrogen production by water gas shift reactions
sufficient method of hydrogen production by water gas shift reactions sufficient method of hydrogen production by water gas shift reactions
sufficient method of hydrogen production by water gas shift reactions
 
Hydrogen Production
Hydrogen ProductionHydrogen Production
Hydrogen Production
 
“Optimal performance and Analysis on 4-S Si and CI Engine Fueled with HHO Gas...
“Optimal performance and Analysis on 4-S Si and CI Engine Fueled with HHO Gas...“Optimal performance and Analysis on 4-S Si and CI Engine Fueled with HHO Gas...
“Optimal performance and Analysis on 4-S Si and CI Engine Fueled with HHO Gas...
 
Biohydrogen synthesis
Biohydrogen synthesisBiohydrogen synthesis
Biohydrogen synthesis
 
Hydrogen as a fuel in future
Hydrogen as a fuel in futureHydrogen as a fuel in future
Hydrogen as a fuel in future
 
Presentation (Hydrogen)
Presentation (Hydrogen)Presentation (Hydrogen)
Presentation (Hydrogen)
 
Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)
Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)
Tobi Fadiran's hydrogen energy Virtual Abstract (Independent Research)
 
Mitacs hydrofuel-uoit comparative assessment of nh3 production and utilizatio...
Mitacs hydrofuel-uoit comparative assessment of nh3 production and utilizatio...Mitacs hydrofuel-uoit comparative assessment of nh3 production and utilizatio...
Mitacs hydrofuel-uoit comparative assessment of nh3 production and utilizatio...
 
Comparison Of Corrossion Resistance Of Copper For Samples
Comparison Of Corrossion Resistance Of Copper For SamplesComparison Of Corrossion Resistance Of Copper For Samples
Comparison Of Corrossion Resistance Of Copper For Samples
 
Development of Aqueous Electrolytes and Corrosion Inhibitors in Aluminium-Air...
Development of Aqueous Electrolytes and Corrosion Inhibitors in Aluminium-Air...Development of Aqueous Electrolytes and Corrosion Inhibitors in Aluminium-Air...
Development of Aqueous Electrolytes and Corrosion Inhibitors in Aluminium-Air...
 
Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...
Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...
Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...
 
Ijmet 10 01_088
Ijmet 10 01_088Ijmet 10 01_088
Ijmet 10 01_088
 
An Assessment of Phase Change Materials for Domestic Applicatons
An Assessment of Phase Change Materials for Domestic ApplicatonsAn Assessment of Phase Change Materials for Domestic Applicatons
An Assessment of Phase Change Materials for Domestic Applicatons
 

Similar to METAL HYDRIDE BASED COOLING SYSTEMS

IRJET-Performance Simulation of Hydrogen Sorption in Metal Hydride based stor...
IRJET-Performance Simulation of Hydrogen Sorption in Metal Hydride based stor...IRJET-Performance Simulation of Hydrogen Sorption in Metal Hydride based stor...
IRJET-Performance Simulation of Hydrogen Sorption in Metal Hydride based stor...IRJET Journal
 
Corrosion assessment & recommendations
Corrosion assessment & recommendationsCorrosion assessment & recommendations
Corrosion assessment & recommendationsAbdul Hannan
 
SRNL Acceptability Envelope metal hydrides
SRNL Acceptability Envelope metal hydridesSRNL Acceptability Envelope metal hydrides
SRNL Acceptability Envelope metal hydrideschrisrobschu
 
EFFECT OF CONCENTRATION OF LITHIUM BROMIDE MIXTURE ON COP FOR SINGLE EFFECT L...
EFFECT OF CONCENTRATION OF LITHIUM BROMIDE MIXTURE ON COP FOR SINGLE EFFECT L...EFFECT OF CONCENTRATION OF LITHIUM BROMIDE MIXTURE ON COP FOR SINGLE EFFECT L...
EFFECT OF CONCENTRATION OF LITHIUM BROMIDE MIXTURE ON COP FOR SINGLE EFFECT L...Editor IJMTER
 
PERFORMANCE STUDY OF A PSEUDO SINGLE ROW RADIATOR OPERATED WITH DIFFERENT NAN...
PERFORMANCE STUDY OF A PSEUDO SINGLE ROW RADIATOR OPERATED WITH DIFFERENT NAN...PERFORMANCE STUDY OF A PSEUDO SINGLE ROW RADIATOR OPERATED WITH DIFFERENT NAN...
PERFORMANCE STUDY OF A PSEUDO SINGLE ROW RADIATOR OPERATED WITH DIFFERENT NAN...IAEME Publication
 
Study and CFD Analysis on Different Test Plate Specimens with Different Nozzl...
Study and CFD Analysis on Different Test Plate Specimens with Different Nozzl...Study and CFD Analysis on Different Test Plate Specimens with Different Nozzl...
Study and CFD Analysis on Different Test Plate Specimens with Different Nozzl...IRJET Journal
 
Report on cryogenic heat treatment
Report on cryogenic heat treatmentReport on cryogenic heat treatment
Report on cryogenic heat treatmentDeepak Singh
 
Comparison of the Performances of NH3-H20 and Libr-H2O Vapour Absorption Refr...
Comparison of the Performances of NH3-H20 and Libr-H2O Vapour Absorption Refr...Comparison of the Performances of NH3-H20 and Libr-H2O Vapour Absorption Refr...
Comparison of the Performances of NH3-H20 and Libr-H2O Vapour Absorption Refr...IJERA Editor
 
NETS_2015_Full_Paper_Maidana
NETS_2015_Full_Paper_MaidanaNETS_2015_Full_Paper_Maidana
NETS_2015_Full_Paper_MaidanaCarlos O. Maidana
 
THERMO-CHEMICAL PROCESSING.pptx
THERMO-CHEMICAL PROCESSING.pptxTHERMO-CHEMICAL PROCESSING.pptx
THERMO-CHEMICAL PROCESSING.pptxsudhakargeruganti
 
Metal Oxides as Catalyst/Supporter for CO2 Capture and Conversion
 Metal Oxides as Catalyst/Supporter for CO2 Capture and Conversion Metal Oxides as Catalyst/Supporter for CO2 Capture and Conversion
Metal Oxides as Catalyst/Supporter for CO2 Capture and Conversionssuser7bc3591
 
IRJET- A Review on Thermal Analysis and Optimization of Heat Exchanger Design...
IRJET- A Review on Thermal Analysis and Optimization of Heat Exchanger Design...IRJET- A Review on Thermal Analysis and Optimization of Heat Exchanger Design...
IRJET- A Review on Thermal Analysis and Optimization of Heat Exchanger Design...IRJET Journal
 
IRJET- Multi Tube Heat Exchanger in Counter Flow by using CFD Analysis
IRJET-  	  Multi Tube Heat Exchanger in Counter Flow by using CFD AnalysisIRJET-  	  Multi Tube Heat Exchanger in Counter Flow by using CFD Analysis
IRJET- Multi Tube Heat Exchanger in Counter Flow by using CFD AnalysisIRJET Journal
 
Future towards renewable hydrogen storage and powered applications
Future towards renewable hydrogen storage and powered applicationsFuture towards renewable hydrogen storage and powered applications
Future towards renewable hydrogen storage and powered applicationsVijayalakshmi Ganesan
 
ICE CONFERENCE_Jaya
ICE CONFERENCE_JayaICE CONFERENCE_Jaya
ICE CONFERENCE_JayaSchlumberger
 

Similar to METAL HYDRIDE BASED COOLING SYSTEMS (20)

IRJET-Performance Simulation of Hydrogen Sorption in Metal Hydride based stor...
IRJET-Performance Simulation of Hydrogen Sorption in Metal Hydride based stor...IRJET-Performance Simulation of Hydrogen Sorption in Metal Hydride based stor...
IRJET-Performance Simulation of Hydrogen Sorption in Metal Hydride based stor...
 
Corrosion assessment & recommendations
Corrosion assessment & recommendationsCorrosion assessment & recommendations
Corrosion assessment & recommendations
 
SRNL Acceptability Envelope metal hydrides
SRNL Acceptability Envelope metal hydridesSRNL Acceptability Envelope metal hydrides
SRNL Acceptability Envelope metal hydrides
 
EFFECT OF CONCENTRATION OF LITHIUM BROMIDE MIXTURE ON COP FOR SINGLE EFFECT L...
EFFECT OF CONCENTRATION OF LITHIUM BROMIDE MIXTURE ON COP FOR SINGLE EFFECT L...EFFECT OF CONCENTRATION OF LITHIUM BROMIDE MIXTURE ON COP FOR SINGLE EFFECT L...
EFFECT OF CONCENTRATION OF LITHIUM BROMIDE MIXTURE ON COP FOR SINGLE EFFECT L...
 
PERFORMANCE STUDY OF A PSEUDO SINGLE ROW RADIATOR OPERATED WITH DIFFERENT NAN...
PERFORMANCE STUDY OF A PSEUDO SINGLE ROW RADIATOR OPERATED WITH DIFFERENT NAN...PERFORMANCE STUDY OF A PSEUDO SINGLE ROW RADIATOR OPERATED WITH DIFFERENT NAN...
PERFORMANCE STUDY OF A PSEUDO SINGLE ROW RADIATOR OPERATED WITH DIFFERENT NAN...
 
Study and CFD Analysis on Different Test Plate Specimens with Different Nozzl...
Study and CFD Analysis on Different Test Plate Specimens with Different Nozzl...Study and CFD Analysis on Different Test Plate Specimens with Different Nozzl...
Study and CFD Analysis on Different Test Plate Specimens with Different Nozzl...
 
Az34313320
Az34313320Az34313320
Az34313320
 
Report on cryogenic heat treatment
Report on cryogenic heat treatmentReport on cryogenic heat treatment
Report on cryogenic heat treatment
 
K1303027277
K1303027277K1303027277
K1303027277
 
silindir pcm
silindir pcmsilindir pcm
silindir pcm
 
Comparison of the Performances of NH3-H20 and Libr-H2O Vapour Absorption Refr...
Comparison of the Performances of NH3-H20 and Libr-H2O Vapour Absorption Refr...Comparison of the Performances of NH3-H20 and Libr-H2O Vapour Absorption Refr...
Comparison of the Performances of NH3-H20 and Libr-H2O Vapour Absorption Refr...
 
Majdi IREC
Majdi IRECMajdi IREC
Majdi IREC
 
NETS_2015_Full_Paper_Maidana
NETS_2015_Full_Paper_MaidanaNETS_2015_Full_Paper_Maidana
NETS_2015_Full_Paper_Maidana
 
F012234450
F012234450F012234450
F012234450
 
THERMO-CHEMICAL PROCESSING.pptx
THERMO-CHEMICAL PROCESSING.pptxTHERMO-CHEMICAL PROCESSING.pptx
THERMO-CHEMICAL PROCESSING.pptx
 
Metal Oxides as Catalyst/Supporter for CO2 Capture and Conversion
 Metal Oxides as Catalyst/Supporter for CO2 Capture and Conversion Metal Oxides as Catalyst/Supporter for CO2 Capture and Conversion
Metal Oxides as Catalyst/Supporter for CO2 Capture and Conversion
 
IRJET- A Review on Thermal Analysis and Optimization of Heat Exchanger Design...
IRJET- A Review on Thermal Analysis and Optimization of Heat Exchanger Design...IRJET- A Review on Thermal Analysis and Optimization of Heat Exchanger Design...
IRJET- A Review on Thermal Analysis and Optimization of Heat Exchanger Design...
 
IRJET- Multi Tube Heat Exchanger in Counter Flow by using CFD Analysis
IRJET-  	  Multi Tube Heat Exchanger in Counter Flow by using CFD AnalysisIRJET-  	  Multi Tube Heat Exchanger in Counter Flow by using CFD Analysis
IRJET- Multi Tube Heat Exchanger in Counter Flow by using CFD Analysis
 
Future towards renewable hydrogen storage and powered applications
Future towards renewable hydrogen storage and powered applicationsFuture towards renewable hydrogen storage and powered applications
Future towards renewable hydrogen storage and powered applications
 
ICE CONFERENCE_Jaya
ICE CONFERENCE_JayaICE CONFERENCE_Jaya
ICE CONFERENCE_Jaya
 

More from IAEME Publication

IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdfIAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdfIAEME Publication
 
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
 
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSA STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
 
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSBROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
 
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSDETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
 
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
 
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOVOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
 
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
 
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYVISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
 
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
 
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICEGANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICEIAEME Publication
 
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
 
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
 
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
 
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
 
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
 
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
 
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
 
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
 
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTA MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
 

More from IAEME Publication (20)

IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdfIAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdf
 
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
 
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSA STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
 
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSBROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
 
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSDETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
 
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
 
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOVOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
 
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
 
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYVISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
 
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
 
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICEGANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICE
 
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
 
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
 
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
 
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
 
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
 
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
 
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
 
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
 
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTA MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
 

Recently uploaded

Call Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile serviceCall Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile servicerehmti665
 
GDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentationGDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentationGDSCAESB
 
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...ranjana rawat
 
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...VICTOR MAESTRE RAMIREZ
 
Application of Residue Theorem to evaluate real integrations.pptx
Application of Residue Theorem to evaluate real integrations.pptxApplication of Residue Theorem to evaluate real integrations.pptx
Application of Residue Theorem to evaluate real integrations.pptx959SahilShah
 
Past, Present and Future of Generative AI
Past, Present and Future of Generative AIPast, Present and Future of Generative AI
Past, Present and Future of Generative AIabhishek36461
 
Gurgaon ✡️9711147426✨Call In girls Gurgaon Sector 51 escort service
Gurgaon ✡️9711147426✨Call In girls Gurgaon Sector 51 escort serviceGurgaon ✡️9711147426✨Call In girls Gurgaon Sector 51 escort service
Gurgaon ✡️9711147426✨Call In girls Gurgaon Sector 51 escort servicejennyeacort
 
Heart Disease Prediction using machine learning.pptx
Heart Disease Prediction using machine learning.pptxHeart Disease Prediction using machine learning.pptx
Heart Disease Prediction using machine learning.pptxPoojaBan
 
What are the advantages and disadvantages of membrane structures.pptx
What are the advantages and disadvantages of membrane structures.pptxWhat are the advantages and disadvantages of membrane structures.pptx
What are the advantages and disadvantages of membrane structures.pptxwendy cai
 
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130Suhani Kapoor
 
chaitra-1.pptx fake news detection using machine learning
chaitra-1.pptx  fake news detection using machine learningchaitra-1.pptx  fake news detection using machine learning
chaitra-1.pptx fake news detection using machine learningmisbanausheenparvam
 
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...Soham Mondal
 
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escortsranjana rawat
 
Sachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
Sachpazis Costas: Geotechnical Engineering: A student's Perspective IntroductionSachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
Sachpazis Costas: Geotechnical Engineering: A student's Perspective IntroductionDr.Costas Sachpazis
 
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝soniya singh
 
SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )Tsuyoshi Horigome
 
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxDecoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxJoão Esperancinha
 
CCS355 Neural Network & Deep Learning Unit II Notes with Question bank .pdf
CCS355 Neural Network & Deep Learning Unit II Notes with Question bank .pdfCCS355 Neural Network & Deep Learning Unit II Notes with Question bank .pdf
CCS355 Neural Network & Deep Learning Unit II Notes with Question bank .pdfAsst.prof M.Gokilavani
 
microprocessor 8085 and its interfacing
microprocessor 8085  and its interfacingmicroprocessor 8085  and its interfacing
microprocessor 8085 and its interfacingjaychoudhary37
 

Recently uploaded (20)

Call Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile serviceCall Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile service
 
GDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentationGDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentation
 
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
 
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
 
Application of Residue Theorem to evaluate real integrations.pptx
Application of Residue Theorem to evaluate real integrations.pptxApplication of Residue Theorem to evaluate real integrations.pptx
Application of Residue Theorem to evaluate real integrations.pptx
 
Past, Present and Future of Generative AI
Past, Present and Future of Generative AIPast, Present and Future of Generative AI
Past, Present and Future of Generative AI
 
Gurgaon ✡️9711147426✨Call In girls Gurgaon Sector 51 escort service
Gurgaon ✡️9711147426✨Call In girls Gurgaon Sector 51 escort serviceGurgaon ✡️9711147426✨Call In girls Gurgaon Sector 51 escort service
Gurgaon ✡️9711147426✨Call In girls Gurgaon Sector 51 escort service
 
Heart Disease Prediction using machine learning.pptx
Heart Disease Prediction using machine learning.pptxHeart Disease Prediction using machine learning.pptx
Heart Disease Prediction using machine learning.pptx
 
What are the advantages and disadvantages of membrane structures.pptx
What are the advantages and disadvantages of membrane structures.pptxWhat are the advantages and disadvantages of membrane structures.pptx
What are the advantages and disadvantages of membrane structures.pptx
 
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
 
chaitra-1.pptx fake news detection using machine learning
chaitra-1.pptx  fake news detection using machine learningchaitra-1.pptx  fake news detection using machine learning
chaitra-1.pptx fake news detection using machine learning
 
young call girls in Rajiv Chowk🔝 9953056974 🔝 Delhi escort Service
young call girls in Rajiv Chowk🔝 9953056974 🔝 Delhi escort Serviceyoung call girls in Rajiv Chowk🔝 9953056974 🔝 Delhi escort Service
young call girls in Rajiv Chowk🔝 9953056974 🔝 Delhi escort Service
 
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
 
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
 
Sachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
Sachpazis Costas: Geotechnical Engineering: A student's Perspective IntroductionSachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
Sachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
 
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
 
SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )
 
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxDecoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
 
CCS355 Neural Network & Deep Learning Unit II Notes with Question bank .pdf
CCS355 Neural Network & Deep Learning Unit II Notes with Question bank .pdfCCS355 Neural Network & Deep Learning Unit II Notes with Question bank .pdf
CCS355 Neural Network & Deep Learning Unit II Notes with Question bank .pdf
 
microprocessor 8085 and its interfacing
microprocessor 8085  and its interfacingmicroprocessor 8085  and its interfacing
microprocessor 8085 and its interfacing
 

METAL HYDRIDE BASED COOLING SYSTEMS

  • 1. http://www.iaeme.com/ijmet/index.asp 73 editor@iaeme.com International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 12, Dec 2015, pp. 73-80, Article ID: IJMET_06_12_008 Available online at http://www.iaeme.com/IJMET/issues.asp?JType=IJMET&VType=6&IType=12 ISSN Print: 0976-6340 and ISSN Online: 0976-6359 © IAEME Publication METAL HYDRIDE BASED COOLING SYSTEMS Rahul K. Menon Department of Mechanical Engineering, Maharashtra Institute of Technology, Pune, Maharashtra, India ABSTRACT In recent years, a lot of attention has been directed towards metal hydrides. The reason being their ability to store hydrogen. Many attempts have been made to develop metal hydride based heating and cooling systems. The possibility to utilize low temperature heat (waste heat) to drive these systems has great potential, helping to reduce to pollution if implemented. Major applications are seen in air conditioning and heat supply for buildings and in air conditioning of automobiles. Although this technology offers the possibility to increase the energy efficiency of a car (by utilizing waste heat) and consequently reduces the CO2 emissions, its weight specific cooling power has so far been the main obstacle for an automotive application .In this paper, an overview of the operating principles and working of metal hydride based cooling systems; together with the material characteristics relevant to efficient operation of such devices are discussed. Key words: Air-Conditioning, Metal Hydride, PCT, Sorption, Thermal Cooling Cite this Article: Rahul K. Menon. Metal Hydride Based Cooling Systems, International Journal of Mechanical Engineering and Technology, 6(12), 2015, pp. 73-80. http://www.iaeme.com/currentissue.asp?JType=IJMET&VType=6&IType=12 1. INTRODUCTION Prices for energy supply have seen a steady increase over the years. This along with the expected global warming are heavily discussed issues about our future energy system and its economic and ecological price. The constant economic growth of industrial and especially of developing countries combined with the fast increasing population in these areas are crucial facts that increase the necessity for a rational use of all available forms of energy. Increased energy efficiency could tackle national emission or consumption targets without fearing the loss or reduction of living and comfort standards.
  • 2. Rahul K. Menon http://www.iaeme.com/ijmet/index.asp 74 editor@iaeme.com Also there were two main drawbacks with the existing system:  The mobile air conditioning system is not completely leak tight and the refrigerant emissions cause pollution and global warming on a large scale.  The compression of refrigerant vapor demands mechanical energy from the engine and consequently increases the overall fuel consumption along with the corresponding CO2 emissions of the vehicle. The general operation principle of metal hydride based sorption system is a closed operation cycle that utilizes hydrogen as working fluid. The underlying principle is the thermally driven compression of the working fluid (hydrogen) and its reaction with the metal hydride at different pressure. 2. METAL HYDRIDES Metal hydrides are metals which have been bonded to hydrogen to form a new compound. Generally the bond is covalent in nature, but some hydrides are formed from ionic bonds. It is the combination of a metal lattice with a hydrogen molecule. Many kinds of metals or alloys can react reversibly with a large amount of hydrogen under certain conditions. The products of the forward reaction are called metal hydrides (MH), and the reaction can be written as; Msolid + x/2 H2 gas ↔ MHxsolid + heat The chemical reaction of hydrogen and metal powder to form a metal hydride is given by the overall equation where M denotes any kind of metal or alloy able to absorb hydrogen (H2), MHx the corresponding metal hydride and ΔH the enthalpy of the reaction. It can be regarded as a reversible process and according to the principle of Le Chatelier-Braun, a pressure increase shifts the equilibrium to the right (hydrogen is absorbed), whereas a temperature increase shifts it to the left. A release of hydrogen (desorption) from the metal hydride is therefore possible by either reducing the hydrogen pressure or increasing the temperature. As the hydrogen absorption is generally exothermic, the endothermic desorption tends to cool the metal powder. The MH materials have widely attracted attention since the successful development of some members with great potential for hydrogen storage, such as LaNi5, TiFe and Mg2Ni. Moreover, after years of study, the applications of MH have been much extended. e.g. separation/purification of gas mixtures with hydrogen isotopes , heat pumping from low to high temperature , periodical heat storage and the thermal compression of hydrogen . Generally the MH related applications share the common advantages of being environmentally benign, compact and flexible for various operating conditions. Metal hydrides (MH) possess several superiorities to other hydrogen storage media in several aspects such as safety and compact storage. Metal hydrides display very high volumetric storage densities, typically 100 to 120 grams of hydrogen per liter. A lot of heat is released during hydrogen absorption process, whereas much heat is absorbed during hydrogen desorption process. A continuous cycle of adsorption and desorption is used to provide the required cooling. The stability (dissociation pressure) of the metal hydride phase is one important issue for its applicability. Technically relevant pressure and temperature conditions of the metal-hydrogen reaction depend on the desired application but can be typically assumed as p ≈ 1 – 100 bar and T ≈ 240 – 750 K, respectively.
  • 3. Metal Hydride Based Cooling Systems http://www.iaeme.com/ijmet/index.asp 75 editor@iaeme.com 2.1. Mechanism of H2 movement through the metal crystal lattice The H2 molecule is first weakly physisorbed on the surface and the chemisorbed as strongly bound, individual H-atoms. The size of the hydrogen atoms is lighter and smaller than the metal atoms; therefore, they diffuse quickly from the surface into the periodic sites in the metal crystal lattice Figure 1 Movement of hydrogen molecules 2.2. Selection of Alloys The performance of the MH systems largely depends on the properties of the metal hydrides selected. They should have high COPs and high specific power outputs, i.e. in case of refrigerator air-conditioner, specific cooling power (SCP). They should be compact in design, i.e. low mass and/or low volume, have a long life and low performance degradation, and they should be economic. Therefore, metal hydrides used for MHHCS should respectively have suitable properties, e.g. high enthalpy of formation, low specific heat, and high hydrogen absorption capacity, fast reaction kinetics, favorable equilibrium pressures, low hysteresis, flat plateau, simple activation process, minimum degradation after cyclic operation, low cost, etc. There is a plethora of metal hydrides which are potentially suitable. 2.3. Preparation Figure 2 Preparation of Metal Hydride alloys
  • 4. Rahul K. Menon http://www.iaeme.com/ijmet/index.asp 76 editor@iaeme.com 3. PRESSURE COMPOSITION TEMPERATURE (PCT) PROFILES PCT measurements of available alloys are necessarily the first steps of a sorption system design as they reveal the metal hydride properties that consequently define the working conditions of the system. Even though experimental data are available for a variety of metal hydride alloys, a detailed examination of the respective metal hydride characteristics is important. Especially hysteresis, plateau pressure and slope depend on the compositions of the used misch metal (= Mm, mainly Cr and La) or the respective production processes and are only to a certain extent predictable. Basically, PCT is determined by keeping an alloy sample at constant temperature and measuring the pressure change as hydrogen is absorbed. The hydride/dehydride cycling causes a change of the inter-metallic compounds volume that cause cracking for the particles. This cracking of the particles cause increasing of the surface area, which leads to an increase of the hydrogen reactivity Most metal have high attraction for hydrogen and there are also few have poor attraction for hydrogen and the reaction between the metal and hydrogen can be exothermic or endothermic respectively. The process of absorption and desorption is best illustrated by the pressure composition-temperature profiles (PCT curves) Figure 3 Sample PCT diagram of a metal hydride There are three important parameters that can be obtained from a PCI measurement:-  Effective storage capacity for storage systems.  Hysteresis, which is an important characteristic. The hysteresis should be as low as possible as it reduces the efficiency of the system.  Plateau slope, which is the equilibrium pressure in the middle of the plateau.
  • 5. Metal Hydride Based Cooling Systems http://www.iaeme.com/ijmet/index.asp 77 editor@iaeme.com Figure 4 PCT parameters depicted Thermodynamic behavior of metal hydride formation is illustrated in the figure, which is a PCT curve. The line of the upper pressure represents the absorption process and the lower line represents the desorption process and the flat part of both lines is called Plateau. And the difference in equilibrium pressures between the absorption and desorption reactions is called Hysteresis. 4. SORPTION COOLING SYSTEM CONFIGURATION Theoretically, it is possible to develop a large number of different schemes for sorption cooling systems. However, practical considerations like pressure and temperature levels, internal heat and mass exchange area, cost and properties of the working fluids limit the number of practically feasible schemes. A typical configuration is described here: The system comprises of reactors with metal hydrides A and B. There are particular properties of metal hydrides of A and B which are very important. Let us consider A1, A2 to be HT (High temperature) reactors or regeneration alloys and B1, B2 to be LT (Low temperature) reactors or refrigeration alloys. A1 and A2 are filled with metal hydride A while B1 and B2 are filled with metal hydride B. The major difference between the HT and LT reactors is that HT reactors absorb hydrogen at room temperatures and desorbs at high temperatures while LT reactors absorb hydrogen at room temperatures and desorbs at low temperatures. In practice a heat recovery of about 40% is possible. Cooling temperatures of 10°C to -50°C can be obtained with the single stage system.
  • 6. Rahul K. Menon http://www.iaeme.com/ijmet/index.asp 78 editor@iaeme.com 5. WORKING Figure 5 Process flow diagram of first half cycle Figure 6 Process flow diagram of second half cycle  There are two types of reactors: HT(High temperature) and LT (Low temperature)  The reactors are made to undergo a process known as activation which involves infusing hydrogen in the reactors.  HT reactors absorb hydrogen at room temperatures and desorbs at high temperatures.  LT reactors absorb at room temperatures and desorbs at low temperatures.  Hot exhaust is passed to the HT reactor and the reactor desorbs hydrogen gas.  The gas travels to the LT reactor and ambient air is passed.  The LT reactor absorbs the hydrogen in an exothermic reaction.  This process continues until there is a concentration difference between the HT and LT reactor.  In the next half cycle ambient air is passed to the LT reactor and the reactor desorbs hydrogen gas in an endothermic reaction.  During this process the temperature of the air is reduced and is passed on to the user.  The hydrogen travels back to the HT reactor which absorbs the hydrogen in the presence of ambient air.
  • 7. Metal Hydride Based Cooling Systems http://www.iaeme.com/ijmet/index.asp 79 editor@iaeme.com  This process continues until there is a concentration difference between the HT and LT reactor.  In the next half cycle the reactors are interchanged. These two cycles are repeated over and over to provide the necessary cooling 6. ADVANTAGES  Improved fuel efficiency  Proper utilization of a waste commodity and turning it into something useful.  Traditional refrigerants can be avoided.  Less pollution and hence reduced global warming.  Decreases carbon footprint of vehicles.  Hydrogen is a renewable source of energy; hence we don’t have to worry about its depletion. 7. CONCLUSION Metal hydrides are promising working materials for thermally driven solid sorption cooling machines with hydrogen as working fluid. The systems can cover a wide range of operating temperatures from cryogenic applications to comfort air conditioning. A variety of heat sources from solar heat to automobile exhaust gases can be used to drive the cooling systems. In recent years various designs of such machines have been successfully demonstrated on a laboratory model or prototype scales. In fact, these can be most appropriate for small capacity portable or mobile cooling applications. REFERENCES [1] P.Muthukumar,M.Groll; Erratum to “Metal hydride based heating and cooling systems: A review”;International Journal of Hydrogen Energy 35 (2010) 3817- 3831 [2] Feng Win,Jiangping Chen,Manqi Lu,Zhiju Chen, Yimin Zhou,Ke Yang ;”Development of a metal hydride refrigeration system as an exhaust gas-driven automobile air conditioner”;Renewable Energy 32 (2007) [3] Marc Linder;”Automotive Cooling Systems based on Metal Hydrides”; Institute of Nuclear Technology and Energy Systems, University of Stuttgart,2010 [4] J.Paya,M.Linder,E.Laurien,J.M.Corberan;”Dynamic model and experimental results of a thermally driven metal hydride cooling system”;International Journal of Hydrogen Energy 34 (2009) 3173-3184 [5] Ch.Veeraju, M.Ram Gopal; “ Heat and mass transfer studies on plate fin-and- elliptical tube metal hydride reactors”; Applied Thermal Engineering 30 (2010) [6] Fusheng Yang, Zaoxiao Zhang;” Simulation Studies on the Coupling Process of Heat/Mass Transfer in a Metal Hydride Reactor”; Xi’an Jiaotong University,P.R.China M. Chandra Sekhar Reddy., Thermal Analysis of A Heat Sink For Electronics Cooling, International Journal of Mechanical Engineering and Technology, 6(11), 2015, pp. 145 - 153 [7] F.S. Yang,G.X.Wang,Z.X.Zhang,X.Y.Meng, V.Rudolph;” Design of the metal hydride reactors- A review on the key technical issues”; International Journal of Hydrogen Energy 35 (2010) 3832-3840
  • 8. Rahul K. Menon http://www.iaeme.com/ijmet/index.asp 80 editor@iaeme.com [8] F.Laurencelle,J.Goyette; “ Simulation of heat transfer in a metal hydride reactor with aluminium foam”; International Journal of Hydrogen Energy 32 (2007) 2957-2964 [9] Zewei Bao,Fusheng Yang,Zhen Wu,Serge Nyallang Nyamsi,Zaoxiao Zhang;” Optimal design of metal hydride reactors based on CFD-Taguchi combined method”; Energy Conversion and Management 65 (2013) [10] Giridhara Babu Y., Ashok Babu T.P., Anbalagan M. and Meena R., Experimental and Numerical Investigation of Adiabatic Film Cooling Effectiveness Over The Compound Angled Gas Turbine Blade Leading Edge Model, International Journal of Mechanical Engineering and Technology, 5(9), 2014, pp. 91-100. [11] Groll,M., H.-P.Klein and S.Srinivasa Murthy;” Metal Hydride based Thermal Systems: A Review”; World Renewable Energy Congress -VII; Cologne, Germany, 29 June- 5 July, 2002. [12] Kapil Chopra, Dinesh Jain, Tushar Chandana, Evaluation of Existing Cooling Systems For Reducing Cooling Power Consumption, International Journal of Mechanical Engineering and Technology, 3(2), 2012, pp. 210 - 216.