CAS No：203314-28-7 Molecular Formula ：C8H6Br2O2 Molecular Mass ：293.94004 Exact Mass ：291.873444 PSA ：37.3 A^2 LogP ：2.8 EINECS ：804-900-1 InChIKeys ：NKZKFWYEXDBOTP-UHFFFAOYSA-N H-bond Acceptor ：2 H-bond Donor ：1 SP3 ：0.13 RBN ：2

1. CAS No:203314-28-7
Formula:C8H6Br2O2
Synonyms:2,5-Dibromophenylacetic acid;2-(2,5-DibroMophenyl)acetic
acid;2,5-Dibromobenzeneacetic acid;Dibromophenylacetic acid
China Export:From 2018.11 to 2019.11, total export volume of 2,5-Dibromophenylacetic acid
from China was 50,754,743KG while total export value was $481,956,961. The biggest proportion
of exporting volume in the last 12 months was 11.87% in 2019.05.
Echemi Chemical Products 2,5-Dibromophenylacetic acid Basic Attributes
CAS No：203314-28-7
Molecular Formula ：C8H6Br2O2
Molecular Mass ：293.94004
Exact Mass ：291.873444
PSA ：37.3 A^2
LogP ：2.8
EINECS ：804-900-1
InChIKeys ：NKZKFWYEXDBOTP-UHFFFAOYSA-N
H-bond Acceptor ：2
H-bond Donor ：1
SP3 ：0.13
RBN ：2
Echemi Chemical Products 2,5-Dibromophenylacetic acid Characteristics
Density ：1.969±0.06 g/cm3
Flash Point ：181.5±23.7 °C
Refractive Index ：1.625
Solubility ：H2O: Very slightly soluble (0.35 g/L) (25 ºC)
Echemi Chemical Products 2,5-Dibromophenylacetic acid Safety Information
HS Code ：2916399090

2. P Code ： P261, P264, P270, P271, P280, P301+P312, P302+P352, P304+P312, P304+P340,
P305+P351+P338, P312, P321, P330, P332+P313, P337+P313, P362, P403+P233, P405, P501
Hazard Statements ：H302+H332
Echemi Chemical Products 2,5-Dibromophenylacetic acid Production Methods
In a 500 ml four-neck reaction flask, 82 g of Intermediate 3 was added, and 400 ml of a 2N
aqueous solution of sodium hydroxide was added and the mixture was heated to 100° C. and
refluxed.TLC monitored the reaction, cooled to room temperature, added dropwise with
36percent hydrochloric acid to pH=8, and the aqueous layer was extracted with ethyl acetate.The
aqueous layer was adjusted to pH=1 to 2 with 36percent hydrochloric acid, solids were
precipitated, and filtered to obtain an off-white solid 2, 5-dibromophenylacetic acid, dried 73 g,
yield 83percent.The 5-bromofluorenone 670.7 g obtained in the previous step, Add 1320ml of
water and cool to -5-0 ° C in an ice bath.Then add 1100g of hydrogen bromide (48percent)
aqueous solution and stir.Most of the raw materials are dissolved, and the temperature is
controlled within the range of -5-0 °C.Add 143 g of sodium nitrite to a solution of 286 ml of
water.During the period, the control temperature does not exceed 0 °C, about 15 minutes, The
incubation reaction was continued for 1 h, and a large amount of brown granular solid
(diazonium salt) was precipitated in the reaction solution for use.In another 10000ml four-necked
flask, 297g of cuprous bromide, 22g of copper bromide, 13200ml of water, hydrogen
bromide(48percent) 1100g of aqueous solution, stirred, the reaction solution was dark red,
heated to 20-25 ° C, the diazonium salt obtained in the previous step was added
dropwise.After the completion of the dropwise addition, the reaction was continued for 1 h, the
temperature was lowered to about 5 ° C, the temperature was kept for 0.5 h, and the filter
cake was washed with cold water until the washing liquid was colorless. drying, The solid 2,
5-dibromophenylacetic acid 746 g was obtained in a yield of 80.5percent, and the HPLC purity

3. was 98.8percent.300.0 g of bromoindolinone (Formula II) prepared in the previous step was put
into a reaction flask, 600 ml of water was added, and the temperature was lowered to -5 to 0 °
C in an ice bath, Then 493.5g of hydrogen bromide (48percent) aqueous solution was added and
stirred.