Recommended
Recommended
More Related Content
What's hot
What's hot (20)
Recently uploaded
Recently uploaded (20)
Présentation1 (2)
- 2. Selection of preformed trays The Accudent System Herbert Frick ICDE
- 3. Try in of selected trays Herbert Frick ICDE
- 4. Application of Accu-Gel Herbert Frick ICDE
- 5. Placing of the maxilliary impression tray in the oral cavity of the patient Herbert Frick ICDE
- 6. Removing the maxillary impression Herbert Frick ICDE
- 7. Injecting the Accu-Gel into the gingivobuccal fold in the mandible Herbert Frick ICDE
- 8. Placing the mandibular tray in its final position Herbert Frick ICDE
- 9. Removing the mandibular impression Herbert Frick ICDE
- 10. Finished maxilliary and mandibular impressions Herbert Frick ICDE
- 11. The Centric Tray System Maintaining the maxillo-mandibualar relation Herbert Frick ICDE
- 12. Determining the vertical demension Herbert Frick ICDE
- 13. Placing the centric tray with the mixed alginate or putty material Herbert Frick ICDE
- 14. Centric tray with the maxillary and mandibular relation contacts Herbert Frick ICDE
- 15. Laboratory procedure Herbert Frick ICDE
- 16. Model transfer to the Stratos 200 using the Average Value Assortement Herbert Frick ICDE
- 18. Horizontal guide mounted on the mandibular model • Lateral view • Front view Herbert Frick ICDE
- 20. 2nd Impression including the Intraoral registration Herbert Frick ICDE
- 21. Mounting of Gnathometer M Herbert Frick ICDE
- 22. Schematic diagram of the occlusal plane of the dentulous and edentulous mandible Herbert Frick ICDE
- 23. Individualized funcional record bite base with complete registration assembly Herbert Frick ICDE
- 24. Positioning the mandibular funcional record bite base Herbert Frick ICDE
- 25. Positioning the maxillary functional record bite base Herbert Frick ICDE
- 26. Checking the record bite bases in the oral cavity Herbert Frick ICDE
- 27. The individual functional impression taking Designing the functional margins Herbert Frick ICDE
- 28. • Carrying functional movements while applying slight masticatory movements • Maxillary wash record Herbert Frick ICDE
- 29. Carrying out of functional movements Succing on a straw Herbert Frick ICDE
- 30. Carrying functional movements while applying slight masticatory pressure Herbert Frick ICDE
- 31. Maxillary wash impression record Herbert Frick ICDE
- 32. Designing the functional mandibular margin By carrying out tongue movements Herbert Frick ICDE
- 33. Designed functional mandibular margin Herbert Frick ICDE
- 34. Carrying out functional movements while applying slight masticatory pressure Herbert Frick ICDE
- 35. Upper and lower functional impressions with perfectly occluding bite blocks Herbert Frick ICDE
- 36. Funcional maxillary and mandibular records Herbert Frick ICDE
- 37. Extra-oral registration using the UTS transferbow Herbert Frick ICDE
- 38. Lateral view with UTS adapter Herbert Frick ICDE
- 39. Connecting the UTS registration joint with the Gnathometer M adapter Herbert Frick ICDE
- 40. UTS mounted on the patient Herbert Frick ICDE
- 41. UTS mounted on the patient Herbert Frick ICDE
- 42. Needle point tracing with the Gnathometer M Herbert Frick ICDE
- 43. • Mandibular record metal base with hight-adjustable registration pin • Applying the registration dye Herbert Frick ICDE
- 44. Preparation of the interoral registration Mounting the mandibular and maxillary record metal bases Herbert Frick ICDE
- 45. Preparation of the interoral registration Removing the mandibular and maxillary bite rims Herbert Frick ICDE
- 46. Maxillary and mandibular record bite bases in the oral cavity Herbert Frick ICDE
- 47. Needle point registration with Gnathometer M movement right side movement left side 1. Lateral movements right and left 2. Protrusion movements 3. Retrusion movements Herbert Frick ICDE
- 48. Checking the needle point record in the oral cavity Herbert Frick ICDE
- 49. Evaluation of the Gothic arch tracing (According to Prof. Gerber) • Classical pointe form – The symmetry indicates an undisturbed movement sequence in the joint and uniform muscle guidance Herbert Frick ICDE
- 50. • Classical flat shape – This figure indicates pronounced lateral motion of condyles in the joint Herbert Frick ICDE
- 51. • Asymmetrical shape – this figure indicates a pronounced impediment in the protrusive excursion of the left mandibular joint Herbert Frick ICDE
- 52. • Arrow point is non-existant – This figure indicates weak to slack movement, particularly of retrusive excursion components; registration must be repeated and more concise motion are requested Herbert Frick ICDE
- 53. • The vertical line extends over the arrow point – This tracing was created by either forcefully pulling or pushing back the mandible – The figure may also been traced with a protruding mandible Herbert Frick ICDE
- 54. • A miniature arrow – This figure indicates cramped movements, poorly placed and painful registration plates, longterm absence of teeth with obstructed movements in the joints, defective prosthesis, etc. Herbert Frick ICDE
- 56. Fixation of the centric occlusion • Aligning the funnel-shaped opening of the fixing plate with the needle point • Checking the centric with secured record bite basis Herbert Frick ICDE
- 57. • Fabricating the key with fast setting plaster or hard silicone • Marking the central line Herbert Frick ICDE
- 58. Checking the secured maxillomandibular functional records Herbert Frick ICDE
- 59. Alternative to the needle-point registration: Functional bite rims fabricated of wax Herbert Frick ICDE
- 60. Selecting the teeth • Living tooth mould chart • Shade guide • Pictures of the patient Herbert Frick ICDE
- 61. Colour selection with the Chromascop shade guide Herbert Frick ICDE
- 62. Fabricating the master models in the Dental laboratory Herbert Frick ICDE
- 63. Individualized model transfer using the UTS Transfer Bow Herbert Frick ICDE
- 64. Close-up view of the registration joint holder in the UTS Herbert Frick ICDE
- 65. Model transfer to the Statos 200 using the registration joint holder Herbert Frick ICDE
- 66. Mounting the mandibular model Herbert Frick ICDE
- 67. Maxillo- mandibular models mounted in the Stratos 200 Herbert Frick ICDE
- 71. Set-up of the posterior teeth in the mandible Selection criteria for posterior teeth A bite analysis indicates two the dentist and dental technician which type of posterior tooth is best for the respective patient Herbert Frick ICDE
- 72. Three different cusp angulations Dr. Strack Herbert Frick ICDE
- 78. Movements • Laterotrusion (right side) Herbert Frick ICDE • Mediotrusion (left side)
- 79. Movements • Laterotrusion (left side) Herbert Frick ICDE • Mediotrusion (right side)
- 81. Anterior tooth relations Herbert Frick ICDE
- 82. Front and lateral view of the complete Wax-up Herbert Frick ICDE
- 83. Wax try - in Checking the: •stability •centric •aesthetics •phonetics •smile line •buccal freeway space Herbert Frick ICDE
- 84. Wax try-in in the oral cavity of the patient Herbert Frick ICDE
- 85. Check by the patient with the help of a mirror Herbert Frick ICDE
- 86. Pictures of the patient before Herbert Frick ICDE after