5. 4. Use only tools and equipment in good condition.
A. True
B. False
x
6. 5. It is OK to make adjustments or clear a jam while the power tool is
running.
A. True
B. Falsex
7. 6. If any tool breaks or malfunctions, report it to your supervisor immediately.
A. True
B. False
x
8. 7. Before connecting to a power source, make sure the power is on.
A. True
B. False X
9. 8. Safety glasses shall always be worn whenever you are using power
hand tool.
A. True
B. False
X
10. 9. There are several types of power tools, including electric, pneumatic,
hydraulic.
A. True
B. False
X
11. 10. Never use electric tools in wet conditions.
A. True
B. False
X
12. 11. When not in use, power tools should be
disconnected.
A. True
B. False
X
13. 12. Keep safe distance between your hands and all moving parts of the
power tool.
A. True
B. False
X
14. 13. Don’t leave a power tool unattended while it is
running.
A. True
B. False
X
15. 14. It is OK to startle someone who is using a power tool.
True
False x
16. 15. Use safety guards exactly as they are supposed to be
used.
A. True
B. False
X
17. 16. When tightening a nut with an adjustable wrench, always pull the
wrench toward you; never push the wrench away from you.
A. True
B. False
X
18. 17. Plastic covered handles on wire-cutting pliers may be used
to cut low-voltage live electrical wire.
A. True
B. False
X
19. 18. Screwdrivers may be used for purposes other than driving or removing
screws, for example as a chisel.
A. True
B. False X
20. 19. When selecting a standard screwdriver be certain that the
tip is almost as thick and as wide as the slot of the head of a
screw.
A. True
B. False
X
21. 20. When using a hacksaw, safety glasses must be
worn.
A. True
B. False
X
22. 21. When you are finished using a hacksaw, tension should be
eased.
A. True
B. False
X