2. 2. It is OK to wear loose clothing, dangling objects and jewellery using hand tool.
A. True
B. False X
3. 3. Keep cords and hoses away from heat, oil and sharp edges.
A. True X
B. False
4. 4. Use only tools and equipment in good condition.
A. True X
B. False
5. 5. It is OK to make adjustments or clear a jam while the power tool is running.
A. True
B. False x
6. 6. If any tool breaks or malfunctions, report it to your supervisor immediately.
A. True x
B. False
7. 7. Before connecting to a power source, make sure the power is on.
A. True
B. False x
8. 8. Safety glasses shall always be worn whenever you are using power hand tool.
A. True x
B. False
9. 9. There are several types of power tools, including electric, pneumatic, hydraulic.
A. True x
B. False
10. 10. Never use electric tools in wet conditions.
A. True x
B. False
11. 11. When not in use, power tools should be disconnected.
A. True x
B. False
12. 12. Keep safe distance between your hands and all moving parts of the power tool.
A. True x
B. False
13. 13. Don’t leave a power tool unattended while it is running.
A. True x
B. False
14. 14. It is OK to startle someone who is using a power tool.
A. True
B. False x
15. 15. Use safety guards exactly as they are supposed to be used.
A. True x
B. False
16. 16.When tightening a nut with an adjustable wrench, always pull the wrench toward you; never
push the wrench away from you.
A. True x
B. False
17. 17.Plastic covered handles on wire-cutting pliers may be used to cut low-voltage live
electrical wire.
A. True x
B. False
18. 18.Screwdrivers may be used for purposes other than driving or removing screws, for
example as a chisel.
A. True
B. False x
19. 19. When selecting a standard screwdriver be certain that the tip is almost as thick and
as wide as the slot of the head of a screw.
A. True x
B. False
20. 20. When using a hacksaw, safety glasses must be worn.
A. True x
B. False
21. 21. When you are finished using a hacksaw, tension should be eased.
A. True
B. False x