The document contains 21 multiple choice questions about safe tool use. The questions cover topics such as inspecting tools for damage before use, wearing proper protective equipment like safety glasses, keeping cords and hoses away from heat sources, only using tools in good working condition, not making adjustments to powered tools while they are running, reporting any broken or malfunctioning tools to a supervisor, and disconnecting power tools when not in use. The questions also address keeping a safe distance from moving tool parts, not leaving powered tools unattended, using tool guards properly, and easing tension on hacksaws after use.
1. Question Excerpt
1. Always examine the tool for damages before use.
A. True
B. False
2. It is OK to wear loose clothing, dangling objects and jewellery using hand tool.
A. True
B. False
3. Keep cords and hoses away from heat, oil and sharp edges.
A. True
B. False
4. Use only tools and equipment in good condition.
A. True
B. False
5. It is OK to make adjustments or clear a jam while the power tool is running.
A. True
B. False
6. If any tool breaks or malfunctions, report it to your supervisor immediately.
A. True
B. False
7. Before connecting to a power source, make sure the power is on.
A. True
B. False
8. Safety glasses shall always be worn whenever you are using power hand tool.
A. True
B. False
9. There are several types of power tools, including electric, pneumatic, hydraulic.
A. True
B. False
10. Never use electric tools in wet conditions.
A. True
B. False
11. When not in use, power tools should be disconnected.
A. True
B. False
12. Keep safe distance between your hands and all moving parts of the power
tool.
A. True
B. False
13. Don’t leave a power tool unattended while it is running.
A. True
2. B. False
14. It is OK to startle someone who is using a power tool.
A. True
B. False
15. Use safety guards exactly as they are supposed to be used.
A. True
B. False
16. When tightening a nut with an adjustable wrench, always pull the wrench toward you;
never push the wrench away from you.
A. True
B. False
17. Plastic covered handles on wire-cutting pliers may be used to cut low-voltage live
electrical wire.
A. True
B. False
18. Screwdrivers may be used for purposes other than driving or removing screws, for
example as a chisel.
A. Ture
B. False
19. When selecting a standard screwdriver be certain that the tip is almost as thick and as
wide as the slot of the head of a screw.
A. True
B. False
20. When using a hacksaw, safety glasses must be worn.
A. True
B. False
21. When you are finished using a hacksaw, tension should be eased.
A. True
B. False