1. Use the below mentioned parameters to setup the networks that will be needed. Please list the (i) networks used in each floor of each building that has an equal amount of hosts on each floor; (ii) the subnet mask that will be used; (HINT: There are a ton of IP addresses available and setting it up for documentation will work well.) Using 10.20.0.0 thru 10.30.255.255 There are 7 buildings that require IP addressing Building Floors Hosts A 10 200 B 30 600 C 5 500 D 43 1600 E 27 5400 F 32 1600 G 11 440 .

1. 1.
Use the below mentioned parameters to setup the networks that
will be needed. Please list the (i) networks used in each floor of
each building that has an equal amount of hosts on each floor;
(ii) the subnet mask that will be used;
(HINT: There are a ton of IP addresses available and setting it
up for documentation will work well.)
Using 10.20.0.0 thru 10.30.255.255
There are 7 buildings that require IP addressing
Building
Floors
Hosts
A
10
200
B
30
600
C
5
500
D
43

2. 1600
E
27
5400
F
32
1600
G
11
440