H0w to Secured Bluetooth DeviceSolutionAnswerBluetooth is be.pdf

•

0 likes•2 views

H0w to Secured Bluetooth Device Solution Answer Bluetooth is best known as the wireless technology that powers hands-free earpieces. Depending on your point of view, people who wear them either: a) Look ridiculous (especially if shining a bright blue LED from their ear); b) Appear mad (when apparently talking to themselves); or c) Are sensible, law-abiding, safety-conscious drivers. Bluetooth is intended to be a standard that works at two levels Risks with Bluetooth devices: Security Architecture: Using initialisation key, the devices then agree on a link key which they will use to establish a secure connection between each other when needed. There are 2 types of link key..

Education

More from feelingcomputors

describe two recent scientific research studies and it therapies involving stem cells. Explain what the researches did(how the study was performed).the result and conclusion Solution Therapies for wound healing: Wound healing is a dynamic process bleeding and coagulation, acute inflammation, cell migration, proliferation, differentiation, angiogenesis, re-epithelialization, and synthesis and remodeling of the extracellular matrix. Many local and systemic factors can impair wound healing process resulting in prolonged and non-healing chronic wounds which affects the quality of patients’life. Stem cell-based therapy represents a promising therapeutic approach for wound healing. Stem cells have been shown to mobilize and find home for ischemic and wounded tissues where they secrete chemokines and growth factors to promote angiogenesis and extracellular matrix remodeling. In wounds, It has been reported that Mesenchymal stem cells are recruited to wound skin at the time of wound healing and have the capacity to differentiate into multiple skin cell types including keratinocytes, endothelial cells and pericytes. Furthermore, circulating MSC recruitment was induced by a specific chemokine (SLC/CCL21)/chemokine receptor (CCR7) interaction both in vitro and in vivo. Intradermal injection of SLC/CCL21 significantly accelerated wound closure by increasing rates of MSC accumulation, especially the formation of endothelial transdifferentiated cells (Sasaki et al., 2008) . MSCs are good candidate which can be transdifferentiated into endothelial cells and epithelial- fibroblast cells for wound repair therapy and understanding there signaling mechanism can further help in regenerative medicine. Mesenchymal stem cells (MSC), referred as mesenchymal stromal cells , colony forming unit- fibroblasts and mesenchymal progenitor cells , were first identified by Friedenstein as subpopulation of bone marrow cells. Other than hemopoietic stem cells and differentiated lineages, bone marrow contains a subset of nonhemopoietic cells, mesenchymal stem cells (MSCs) that account for roughly 0.01–0.001% of the bone marrow derived cell population . These are a rare population of non-hematopoietic stromal cells, present in the bone marrow and most connective tissues of the body.They have capability to proliferate in vitro in uncommitted state and retain their multilineage differentiation potency which make them attractive candidates for biological cell-based tissue repair approaches. These cells have ability to differentiate into three mesenchymal lineages: adipogenic , osteogenic, chondrogenic and can be induced to commit to various other phenotypes like neurogenic, hepatocytes,myogenic, tenocytes, cardiomyocytes, fibroblast and endothelial cells. In vivo studies have also shown that MSCs can differentiate into tissue-specific cells in response to cues provided by different organs . In addition to pluripotency, MSCs are known to have immunosuppressive effects involving vari.

describe two recent scientific research studies and it therapies inv.pdf

feelingcomputors

Differentiating Events that Occur Before and After Ovulation In the Ovarian Cycle Drag each of the terms or statements into the proper category to identify whether it refers to an item or process that occurs prior to or after ovulation. Assume that fertilization is successful. Solution Second meiotic division begins. First polar body formation. Antrim formation. First meiotic division Creation of zonal pellucida Second meiotic division completes Second.polar body formation. Corpus luteum formation. Dramatic increase in progesterone level. Ova enter into infindibulum.Before ovulationAfter Ovulation. Second meiotic division begins. First polar body formation. Antrim formation. First meiotic division Creation of zonal pellucida Second meiotic division completes Second.polar body formation. Corpus luteum formation. Dramatic increase in progesterone level. Ova enter into infindibulum..

Differentiating Events that Occur Before and After Ovulation In the O.pdf

feelingcomputors

Android Studio App that lets you upload pictures to the app. Hello, can someone who is familiar with Android Studio help me create a code (in Java) that is an app page that lets the user upload any picture from the gallery, etc. and saves it into the app after its uploaded? Please send all the code (.JAVA .XML etc.) as I need to test run it on my Android Studio as well to make sure it works. Solution Step 1: Create Basic Android Project in Eclipse Create a Hello World Android project in Eclipse. Go to New > Project > Android Project. Give the project name as ImageGalleryDemo. Step 2: Change the Layout: Step 3: Android Java Code to trigger Image Gallery Intent: import android.app.Activity; import android.content.Intent; import android.database.Cursor; import android.graphics.BitmapFactory; import android.net.Uri; import android.os.Bundle; import android.provider.MediaStore; import android.view.View; import android.widget.Button; import android.widget.ImageView; public class ImageGalleryDemoActivity extends Activity { private static int RESULT_LOAD_IMAGE = 1; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); Button buttonLoadImage = (Button) findViewById(R.id.buttonLoadPicture); buttonLoadImage.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View arg0) { Intent i = new Intent( Intent.ACTION_PICK, android.provider.MediaStore.Images.Media.EXTERNAL_CONTENT_URI); startActivityForResult(i, RESULT_LOAD_IMAGE); } }); } protected void onActivityResult(int requestCode, int resultCode, Intent data) { super.onActivityResult(requestCode, resultCode, data); if (requestCode == RESULT_LOAD_IMAGE && resultCode == RESULT_OK && null != data) { Uri selectedImage = data.getData(); String[] filePathColumn = { MediaStore.Images.Media.DATA }; Cursor cursor = getContentResolver().query(selectedImage, filePathColumn, null, null, null); cursor.moveToFirst(); int columnIndex = cursor.getColumnIndex(filePathColumn[0]); String picturePath = cursor.getString(columnIndex); cursor.close(); ImageView imageView = (ImageView) findViewById(R.id.imgView); imageView.setImageBitmap(BitmapFactory.decodeFile(picturePath)); } } }.

Android Studio App that lets you upload pictures to the app.Hello,.pdf

feelingcomputors

A man starts walking north at 3 fts from a point P. Five minutes la.pdf

feelingcomputors

11. Briefly describe the function of the following in protein synthesis: a. rRNA b.tRNA c.mRNA Solution The functions of the following in protein synthesis are - 1. rRNA : Ribosomal RNAs are mainly associated with ribosomes whose primary function is protein synthesis. rRNAs can be subdivided into large and small subunits of ribosome. These make up the complex structure of the ribosomes. 2. tRNA : Transfer RNAs mainly function as carriers which transfer an amino acid to its corresponding ribosome. This results in the formation of proteins. 3. mRNA - Messenger RNAs are translated by ribosomes to form proteins. It is formed by using DNA as its template. The genetic information present in DNA is copied into it in form of codons. These codons are specific for different types of amino acids..

11. Briefly describe the function of the following in protein synthe.pdf

feelingcomputors

You save exist1 the first day of the month, exist2 the second day, exist4 the third day, continuing to double your savings each day. What will your savings be for the first 11 days? Your savings will be exist for the first 11 days. Solution Savings = 1 + 2 + 4 + 8 + 16..... This is a geometric series with common ratio (r) = 2 The sum of n terms of a Gp (Sn) = Sn = a1 x (rn - 1)/(r - 1) where Sn= Sum till nth term a1 = 1st term r = Common Ratio Hence, Savings till 11th day = 1 x ( 211 - 1)/(2 - 1) => 2047.

You save exist1 the first day of the month, exist2 the second day, ex.pdf

feelingcomputors

Willy owns a small chocolate factory, located close to a river that occasionally floods in the spring, with disastrous consequences. Next summer, Willy plans to sell the factory and retire. The only wealth he will have is the proceeds of the sale of his factory. If there is no flood, the factory will be worth $500,000. If there is a flood, then what is left of the factory will be worth $50,000 Willy can buy flood insurance at a cost of $0.10 for each $1 worth of coverage. Willy thinks that the probability that there will be a flood this spring is 1/10. Let W denote Willy\'s contingent wealth if there is a flood and WNF his contingent wealth if there is no flood. Willy\'s von Neumann Morgenstern utiity function is F, VVNF 10 (d) To buy insurance that pays him $x in case of a flood, Willy must pay an insurance premium of 0.1x. (The insurance premium must be paid whether or not there is flood.) If Willy insures for $x, then if there is a flood, he gets $x insurance benefits. Suppose that Willy has contracted for insurance that pays him $x in the event of a flood. Then after paying his insurance premium, his wealth will be WF then his wealth will be WNr - If Willy has this amount of insurance and there is no flood, Solution Answer:- WF =(1-.1)x Reason:- Because when you have a flood the insurance company pays you pay ( (1-.1)x ) WNF=0.1x If there is no flood then you only pay the premium (.1).

Willy owns a small chocolate factory, located close to a river that o.pdf

feelingcomputors

Which of the following are used as cloning vectors? Select all that apply. ribosomes plasmids cosmids schistosomes artificial chromosomes Solution Vectors used for multiplying the foreign DNA sequences are called cloning vectors. A small piece of DNA, taken from a virus, a plasmid, or the cell of a higher organism that can be stably maintained in an organism is isolated. Into that, a foreign DNA fragment can be inserted for cloning purposes. There are many types of cloning vectors. They are: Artificial chromosomes include Ribosomes and schistosomes are not used as cloning vectors. Therefore, the cloning vectors among the following are plasmids, Cosmids, and artificial chromosomes..

Which of the following are used as cloning vectors Select all that a.pdf

feelingcomputors

When are bank deposits created? When businesses pay wages and salaries to employees When the government printing office receives an order for new paper currency or coins from the Treasury When commercial banks make loans When consumers write checks to pay for purchases Solution Option C is correct When commercial banks make loans. A commercial Bank is a financial institution who accepts deposits, offers account services, make business etc. Commercial banks make money or bank deposits by providing loans and earning interest income from those loans..

When are bank deposits createdWhen businesses pay wages and salar.pdf

feelingcomputors

what historical trends have affected the social resposibilites of business? Solution Various types of historical trends have affected the social responsibilities of business in a positive way. The Principles of scientific management saw its first roots due to the historical industrial inefficiency in the business back in late 19th and 20th century. In terms of women’s role in the industry revolution, there was a marked change of attitude on the minds of the people over the years and more acceptance of the ‘Working class’ image of the women in general in the field of business. To throw more light upon this aspect, let’s go back to the days of the Industrial revolution to tap the historical trends of the same: There was a dire need to working opportunities for the women in working class families during the days of the Industrial revolution due to the economic crisis in their families. The scope of opportunities for the women revolved primarily in the area of domestic services, daily wages labor class workers or in the textile mills. However, the working environment was not very conducive for the women to work in due to unhygienic conditions prevailing at that time along with the exposure of them to the hazardous work surroundings. There was also no parity witnessed in the wages that were granted to the men and that to the women for similar jobs. Men assumed higher positions than women in the working class families. However, due to the cash crunch faced by the economically regressed families, the dependencies upon the women as well, to get into the working class families increased. Women also faced oppositions from the male fraternity from banning them from working in certain areas that the males believed women could not do justice with. However, with the advent of new and emerging technologies, women’s scope of work migrated from domestic maids or factory workers to now, clerical jobs too. Accordingly their independence in the field of work rose. The awareness among the women fraternity now started increasing with women fighting for their rights in the working system. With rapid industrialization, women stood up to voice their opinions and started demanding for equality with the status and facilities availed by the men. As a result, a healthy competition initiate in the labor class of the society with the men trying to keep pace with the women in every field which was earlier predominantly managed by men. However, due to the wages differentiation still posing as a challenge for the women who expected parity in terms of the wage structure as well, there grew a demand for the female workers in factories and other places owing to the concept of availing women laborers for cheaper wages. However, with women trying to strike balance between the household as well it was necessary for them to contribute to the earnings in the family by getting themselves employed outside the household, the lives of their children became more challenging since they had.

what historical trends have affected the social resposibilites of bu.pdf

feelingcomputors

What are some alternate perspectives that HRM professionals may pursue to reduce the problems of information overload? Solution Nowadays information overload becomes a big issue in many organization. It generally arises due to access use of website, sending e-mails, improper and unclear messages which take time to understand. HRM professionals by the following ways may pursue to reduce the problems of information overload-.

What are some alternate perspectives that HRM professionals may purs.pdf

feelingcomputors

view the media release by Phillip Lowe, the Governor of the RBA and answer the questions below. tp:/www.rba.gov.au/media-releases/2017mr-17-09 html 1.3. In the new equilibrium, it is the new money demand and the new money supply that determines the nominal interest rate. O True OFalse Solution The statement is true Nominal interest rate is the rate of interest before adjustment for inflation. It is quoted on bonds and loans. It doesn\'t take inflation in to account ..

view the media release by Phillip Lowe, the Governor of the RBA and a.pdf

feelingcomputors

Tomas is a 4-year-old male who is an only child of two professional parents. They often leave him with a babysitter or in day care when he finishes preschool. In the last few months, he has developed some motor tics, especially in his right eye. He seems to blink continuously and is often not aware of it. Further, his preschool teacher reported that he has been making noises during quiet and playtime. When asked to control the noises, Tomas seems confused. He is unaware of the noises that he makes. His parents have also noticed that he has become very clingy during the drive to preschool each morning and that he is developing fears of water and heights. They are worried about him as he was not like this as a baby. Their doctor referred them to a child neurologist for an evaluation. Discussion Topic 1 of 1 What disorder does Tomas likely have (according to your reading)? How will the child neurologist test Tomas to make a diagnosis? Explain which parts of the brain are involved in his involuntary actions and describe how this disorder can be treated. Solution Tomas has Tourette syndrome. Symptoms Tics which are sudden, brief, intermittent movements or sounds are the distinguished symptoms of Tourette syndrome. Simple tics include - eye blinking, head jerking, eye darting, nose twitching, etc Vocal tics include - grunting, coughing, barking,etc. Tomas seems to have both simple and vocal tics. Vocal and simple tics can sometime be not the reason for Tourette Syndrome. Hence, to rule out the possibility, it is necessary to do blood tests and especially MRI scans. There\'s no specific treatment for Tourette syndrome. Treatment controls tics that interfere with functioning. edications to help control tics or reduce symptoms of related conditions include: Therapy Causes- Tics result from dysfunction in the central nervous system especially in the cortical and subcortical regions, the thalamus, basal ganglia, and frontal cortex of the brain. Failures in circuits connecting the brain\'s cortex and sub-cortex is an implicated reason for Neuroanatomic models. Studies show that abnormal activity of the brain chemical, or neurotransmitter, dopamine, is involved. Dopamine excess or super-sensitivity of the dopamine receptors is also an underlying mechanism of Tourette syndrome..

Tomas is a 4-year-old male who is an only child of two professional .pdf

feelingcomputors

This is a homework assignment that has to be done in JAVA. Objective: Write a class Called GenDoubleLinkedList which is a generic double linked list. This link list is similar to the single linked list that was shown in class except that each node in addition to having data and nextLink (which was originally called link) now has prevLink. The class GenDoubleLinkedList needs to have the following: -Internal class ListNode which has: - Instance Variables: - data of type T - nextLink of type ListNode - prevLink of type ListNode - Constructors: - Default - Parameterized Instance Variables: - head of type ListNode which always points to the beginning of the linked list - current of type ListNode which moves around pointing to one of the nodes Constructor: - A default constructor that initializes head to an empty ListNode and sets current to point at the head. Methods: - goToNext – This moves the current node forward in the list by one node. It doesn’t move forward if that node is null - goToPrev – This moves the current node backwards in the list by one node. It doesn’t move backwards if that node is null. - getDataAtCurrent – returns the data at the current node as long as the current isn’t null - setDataAtCurrent – takes in a parameter and sets the data at the current node to that value as long as current is not null - insertNodeAfterCurrent – creates a new node based on data that is passed in by a parameter and puts that node after the current position - deleteCurrentNode – removes the current node from the list by resetting the links - showList – prints out the contents of the list line-by-line - inList – returns a true or false value based on whether or not the data passed in via a parameter is in the list Insert Node After Current Delete Current Node Head Current Solution Hi, Please find my implementation. Please let me know in case of any issue. public class GenDoubleLinkedList> { private class ListNode{ T data; ListNode nextLink; ListNode prevLink; public ListNode(T data) { this.data = data; nextLink = null; prevLink = null; } } // instance variables private ListNode head; private ListNode current; public GenDoubleLinkedList() { head = new ListNode(null); current = head; } public void goToNext(){ if(current != null && (current == head && head.nextLink != null)) current = current.nextLink; else if(current != null && current != head) current = current.nextLink; } public void goToPrev(){ if(current != null && current != head) current = current.prevLink; } public T getDataAtCurrent(){ if(current == null || current == head) return null; return current.data; } public void setDataAtCurrent(T data){ if(current != null && current != head){ current.data = data; } } public void insertNodeAfterCurrent(T data){ if(current == null) return; ListNode newNode = new ListNode(data); newNode.nextLink = current.nextLink; if(current.nextLink != null) current.nextLink.prevLink = newNode; current.nextLink = newNode; newNode.prevLink = current; } public void delet.

This is a homework assignment that has to be done in JAVA.Objectiv.pdf

feelingcomputors

The process by which the bureaucracy produces what is effectively le.pdf

feelingcomputors

5. Mickey borrowed $11,300 from Donald on Dec, 4, 2012 and agreed to pay Donald in 150 days at 6.45% interest. On Feb. 28, 2013, Donald sold the note to Minnie at a discount of 5%. How much did Minnie pay to Donald? How much does Mickey pay to Minnie? Solution minnie pays to donald : 11,300 -(11, 300 *5/100) = 10,735 (prinipal - 5 percent discount on the prinicipal ) mickey pays to minnie = Prinipal * rate *time /100 =>11,300 *6.45 *365/86 *365 *100 (converting rate into days) => 8.475 dollars.

5. Mickey borrowed $11,300 from Donald on Dec, 4, 2012 and agreed to.pdf

feelingcomputors

The can counting program of Figure 8-9 is described in the text. Prepare an I/O connection diagram and ladder logic program for this process. Use addresses that apply to your PLC. Enter the program into the PLC and prove its operation. Solution I/O connection There three counter instructions CTU-Count Up Counter CTD-Count Down Counter CTUD-Count Up/Down Counter All three count rung transitions Two possible Visualizations : 1st method requires extra programming if timer done status needs to be referenced On other rungs. 2nd method sets a bit with Q which can be referenced by other logic. implementation: cpuchecks I/o module checks scan inputs Execute program Update outputs.

The can counting program of Figure 8-9 is described in the text. Prep.pdf

feelingcomputors

The following methods are commonly used in a dictionary implementatio.pdf

feelingcomputors

The first table that follows shows government expenditures as a percentage of GDP for selected years. For the same years, the first table also shows different categories of federal expenditures as percentages of total federal government expenditures. The second table shows government tax revenue as a percentage of GDP for the selected years. The second table also shows different categories of federal tax receipts as percentages of total federal tax receipts. (Source: \"U.S. Government Printing Office. Government Expenditures (GDP %) Expenditures as a Share of the Federal Government Budget Education Net Interest on Year 1950 1970 2011 Federal 16% 19% 24% State and Local 7% 10% 14% Income Security National Defense and Health Federal Debt Others 42% 1896 11% 13% 22% 50% 32% 40% 20% 2% 11% 13% 11% 9% 6% Including transportation, agriculture, veterans\' benefits, international affairs, housing, and so on. Federal Government Receipts Government Tax Receipts (GDP %) Individua Social Insurance Corporate State and Local Income Taxes Excise Taxes Others Year 1950 1970 2011 Federal 14% 1996 15% Income Taxes 40% 4796 47% Taxes 11% 2 3% 36% 26% 1796 896 19% 8% 3% 4% 5% 6% 10% 14% Solution The correct answer is option because because the individual income tax and social insurance tax reciepts constitute about 83% ..

The first table that follows shows government expenditures as a perce.pdf

feelingcomputors

Submit a paragraph on a particular culture of people which have made significant contributions in the field of mathematics or applied mathematics. Solution We can take Chinese culture :In china indeginous development of mathematics began very early then tapered off in 14th century and then revived in 20th century.China has made lot pf progress in computers and became a forement because of queing theory of maths.Moe focus is now on engineering mathematics and applications. In factories use of elementary statistics and operations research along with classical mathematics physics. It is also known that work in other field is being carried out extensively but mathematical work is hampered due to isolation of chinese mathematicians..

Submit a paragraph on a particular culture of people which have made.pdf

feelingcomputors

More from feelingcomputors (20)