2. FEC Benne wart flex testing is intended to determine the resistance
of a component of material to cut growth during repeated flexing. It
can also be used to assess the effect of surface patterns on crack
initiation and growth. The test can also be used for understanding
effect of surface patterns of crack and substance growth upon
repeated flexing. The test is specially preferred for out soles of
footwear.
Features
?Equipment made from M.S. Structure duly epoxy or automotive paint
?Tester drive with motorized with pully
?Equipments base also made from rigid plate finish with automated paint
and bright chrome plated
Number of specimen test : 2 for full sole, 6 for ut test specimen
Angle of flexing : 90
Diameter of bending mandrel : 30 mm
Frequency of operation : 125 to 150 cycles/minute.
Motor : ½ HP, Single- Phase 230 volts AC
Counter : Six digit pre set counter
Bennwart Flex Tester
Specification
Related Standards
DIN 53543-1979 Testing of rigid polyurethane (PUR) Integral cellular Material `
` for soles and parts of shoes
SATRA PM 161 Benne wart flex tester Resistance to cut on flexing
IS 15298 (part1)-2002 Safety Protective and Occupational footwear for professional
use
ISO 17707, ISO 8782 (PART1) Professional use part1: Requirement and test method
-1998
Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll
No. 816, New Delhi 110043 (INDIA).
Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara
Road, Mohan Garden, Uttam Nager, Delhi -110059.
Cell - 9811478874, 9811938703, 9212912990
E-mail - info@fecproduct.com/ inquiry_fec@yahoo.com
Website - www.fecproduct.com