At Shivam Enterprises, we ensure 100% customer satisfaction to our customers with our expertise in delivering good quality products. We specializes in manufacturing tile Adhesive, tile mate products, Grouts, Epoxy, Wall putty, AAC BLOCK ADHESIVE, Floor hardener etc.
2. INTRODUCTION
THE COMPANY WAS ESTABLISHED IN 1992. The company
manufactures tile adhesive. Shivam Enterprises Inc. is
committed to strive customer delight by manufacturing
and supplying of products through continual
improvement. We sell our products all over India.
3. OUR PRODUCTS
o Tile Mate Diamond For Wall Only
Tilemate Floor and Wall Thin-Set Adhesive is a high
performance dry set adhesive use with water or latex for
installing ceramic tiles,marble and stone using the thin-set
installation method. For use in floor and wall installations, it has
high tack and will hang wall tile without slippage
o Advantages:-Dual use: For both floors &walls
-Excellent non-stag formula
-smooth, easy to use>
-improved impact resistance
-increased flexibility
o Packiging:20Kgs
o Coverage: Approximately 20-25 sq.ft per 20kg bag with 1/4
*1/4(6mm*6mm) square notch trowel for a bed of 3mm.
o Color:Grey & white
4. Ceramic Adhesive
Dual Use: For both Floors and Wall Excellent
non-Sag formula smooth, easy To use improved
impact resistance increased flexibility suitable
substrates: concrete cement mortar beds ceramic
tiles and stones concrete masonry cement plaster
brick monsry cement terrazzo (package in 20 Kg
bag for all products).
5. Vitrified Adhsive
Dual Use: for both floors and walls excellent non-
sag formula amooth, easy to use improved impact
resistance increased flexibility suitable substrates:
concrete cement mortar beds ceramic tiles and
stones concrete masonry cement plaster brick
monsry cement terrazzo
(package in 20Kg bag for all products).
6. AAC Block Adhesive
AAC BLOCK ADHESIVE is a factory prepared
blend of carefully selected raw materials, portland
cements and graded aggregates and polymers.
designed for use with water to produce high
strength thixotropic mortar, for laying aerated
light weight concrete, fly ash bricks, cement hollow
blocks,cellular concrete blocks or smoothing over
the block work surface in layer of upto 12mm
thickness, that meet and exceed the requirements
of National and International Standards.
7. Admix
White Polymer for use the cement base ADMIX grout.suitable for use
in interior an exterior locations. in both dry and wet surface conditions,
providing greater adhesive to the tile edges e.d.glass mosaic and fully
vitrified tiles and it provides greater abrasion resistance particularly
important in heavily trafficked area such as shopping malls etc.
precaution:keep out of reach of children, where suitable protective
closing, gloves and eyes/face protection.
Advantages:-increase flexural strength an flexibility
-imnprove grout performance
-increase life of grout
-reduce water permeability
Pack size:200ml