Recommended
More Related Content
What's hot
What's hot (17)
Similar to Cement Australia plasterers grey cement
Similar to Cement Australia plasterers grey cement (20)
Recently uploaded
Recently uploaded (20)
Cement Australia plasterers grey cement
- 1. For more information call 1300 CEMENT (1300 236 368) or visit www.cementaustralia.com.au Cement Australia Plasterers Grey Cement is specifically used in making an internal base coat render to cover standard clay brick surfaces. Also used for ‘Cement Dado’ or glass faced cement renders and internal or external sand-finished work. APPLICATIONS Plasterers Grey Cement is used as a cementitious binder in Render applications. This product is specifically designed for plasterers to meet Western Australian site conditions, substrates, plastering sands and plastering practices. Where specific properties such as rapid early strength gain are required a more specialised type of cement should be considered and it is advisable to seek advice from Cement Australia. AVAILABILITY Product is available in 20kg bags. FEATURES AND BENEFITS • Specifically designed grey cement for internal base coat renders • Mix with plastering sand and water to produce a quality render • Contains pre-blended General Purpose Cement & Hydrated Lime and simplifies the mixing process • Premixed ingredients speed up the job and improve quality by reducing mix variation • Easy to trowel off and provides a level surface for the top coat RELEVANT AUSTRALIAN STANDARD Standards Australia – Guide to Plastering HB 161 - 2005 RENDER MIX PROPERTIES The following table provides a guide to the proportions (by volume) to be used for wall renders. (Note: This information is a guide only and specific advice for your project should be obtained for the particular materials that you are using.) Substrate Plasterers Grey Cement Plasterers Sand Bags per 100m2 at 10mm thickness Render Base Coat 1 3 18 External Walls • Sand Finish 1 4 15 Internal Walls • Floating • Sand Finish • Cement Dado Base Coat • Cement Dado Top Coat 1 1 1 1 5 5 3 1 13 13 18 27 PDS PGC Revision Issued 1.0 01/02/12
- 2. Cement Australia Pty Ltd ABN 75 104 053 474 12 Station Avenue Darra QLD 4076 1300 CEMENT (1300 236 368) www.cementaustralia.com.au Curing A minimum curing period of three days is recommended for all render applications. Water sprays or moisture retaining techniques such as covering with polythene or damp hessian are recommended. Curing should begin once the render application is completed. STORAGE, HANDLING & SAFETY • The ‘shelf life’ of Plasterers Grey Cement is dependent on the storage conditions. It is necessary for Plasterers Grey Cement to be stored in dry conditions and protected from rain, dew and any other moisture source. Bagged cement that has hardened or is lumpy as a result of exposure to moisture should not be used. • Full Safety, Storage, Handling and Disposal information is available in the specific product Material Safety Data Sheet (MSDS). PDS PGC Revision Issued 1.0 01/02/12 NOTE: The Plasterers Grey Cement Safety Data Sheet (MSDS) is available at www.cementaustralia.com.au PRODUCT DISCLAIMER Recommendations regarding the use of this product are to be taken as a guide only. If in doubt contact Cement Australia Pty Limited (“Cement Australia”) or seek professional advice. To the extent permitted by law, Cement Australia excludes all implied warranties, conditions and guarantees imposed by legislation. Cement Australia excludes all liability for loss, damage or injury arising from use of the product (i) otherwise than in accordance with the recommendations or (ii) for purposes other than those for which it is ordinarily acquired. For all other loss, damage or injury arising from the use of this product, to the extent permitted by law Cement Australia’s liability is limited, at its discretion, to refunding the cost of the product or resupplying the product or equivalent product.