2. Making my contents page
This tool allowed me to fill the
boxes in red
Text box
tool
The pink boarder
allowed me to align
my work
This is the tool which allowed me to create the
swatch red colour
When designing my contents page the first thing I did was create Once I created my header I added the date and issue number,
my header. I did this by creating a text box using the text box tool the same information as I placed on the front cover. Once I
and then using dragging the box to where I wanted it. I have also added that I created the headers for the contents page, I also
used the same red which was used on the front cover and I did this did this by creating a text box and then filling the box with the
by creating a swatch of the red colour, which enabled me to use the red colour to make them stand out more. I also made sure
same red each time. that the boxes were all in line with the pink boarder.
3. Making my contents page
Clicking file and then place allowed
me to place the picture in the box
‘Auto fit’ allowed
me to place the
picture perfectly
into the box.
The box
needed to
insert the
picture
Once I inserted my sub-headings for the contents page it was much The final thing I added to my contents page was the images and the
easier to organise the actual features of the magazine. I created a captions to these. To do this was very simple as all you needed to
separate text box for each section which made it easier to organise do was draw a box and then place the picture inside of it, the tricky
the text. Again I made sure that the text kept inside the pink bit was trying to fit the box into the picture however, this made
boarder, this is so when the magazine is printed no text would be simpler by the ‘auto fit’ tool. Once I had positioned my pictures
cut off. where I wanted them my contents page was completed.
