auto cad assignment

1. 6/15/15 Lesson 1-2 Commands
www.mycadsite.com/tutorials/level_1/links/l1_comm.htm 1/2
The following is a list of all the commands required to complete Assignment 1. If your
results are different than the sample drawing file, check your input against these. Press
the F2 key to see your input. (Press F2 to close the text screen).
Command: line <enter>
Specify first point: 1,2 <enter>
Specify next point or [Undo]: 3,2 <enter>
Specify next point or [Undo]: 3,4 <enter>
Specify next point or [Close/Undo]: 1,4 <enter>
Specify next point or [Close/Undo]: c <enter>
(Completes the first box)
Command: l <enter>
LINE Specify first point: 4.5,2 <enter>
Specify next point or [Undo]: @2,0 <enter>
Specify next point or [Undo]: @0,2 <enter>
Specify next point or [Close/Undo]: @-2,0 <enter>
Specify next point or [Close/Undo]: @0,-2 <enter>
Specify next point or [Close/Undo]: <enter>
Completes the second box
Command: l
LINE Specify first point: 8,2
Specify next point or [Undo]: @1<45
Specify next point or [Undo]: @1<135
Specify next point or [Close/Undo]: @1<225
Specify next point or [Close/Undo]: @1<315
Specify next point or [Close/Undo]:
Completes the 3rd, angled box
Command: c
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: 7,6
Specify radius of circle or [Diameter]: .75
Completes the circle
Command: l
LINE Specify first point: 0,0
Specify next point or [Undo]: @10,0
Specify next point or [Undo]: @0,7

2. 6/15/15 Lesson 1-2 Commands
www.mycadsite.com/tutorials/level_1/links/l1_comm.htm 2/2
Specify next point or [Close/Undo]: @-10,0
Specify next point or [Close/Undo]: c
Completes the border
Command: save
Command: plot