I am exploring the basic components of advanced broadband networks..pdf

•

0 likes•2 views

I am exploring the basic components of advanced broadband networks. Describe the three layered architecture: Briefly, explain the difference between link state and distance vector routing Describe how the sliding window protocol works Explain the CIDR concept and its major benefit Solution The three layered architecture is a client server architecture.This architecture is used for functional perspective logic,data access, data storage and user interface. Three layer architecture is used for software design. Three layers are as follows, SLIDING WINDOW PROTOCOL: It is one of the packet based data transmission protocol.Packets are send and its too hard to send duplicate packets and to identify the missing packets. In sliding window protocol we set a limit for number of packets to be transmitted at a time. CIDR concept: Classless Inter-domain routing is an alternate to the traditional subnetting. It is a way to allow the more flexible way to allocate Internet protocol. Benefit: CIDR provides the better way to address since it prevents the wastage of addressing space since it is a flexible way of addressing.Link state vectordistance vector routingLink state vector makes all the nodes to know about the route.Distance vector doubting only the neighbouring node is knownLink state information is flooded throughout the link state domain.Distance vector routing information is not knownl.

Education

Similar to I am exploring the basic components of advanced broadband networks..pdf

Introduction to IoT - Unit I

Dr.M.Karthika parthasarathy

F04503057062

ijceronline

Analysis Of Wireless Sensor Network Routing Protocols

Amanda Brady

Ccna presentation{complete]

Avijit Nath

Frame Relay is a high-performance WAN protocol that operates at the physical and data link layers of the OSI reference model. Frame Relay originally was designed for use across Integrated Services Digital Network (ISDN) interfaces. Today, it is used over a variety of other network interfaces as well. Frame relay is a type of WAN connection use to connect one site to many remote sites through a single physical circuit; this operation makes it easy to construct reliable and inexpensive networks.

Frame Relay

Netwax Lab

important network terminologies

evelyn

Glossary of introduction to networks

evelyn

Ccnapresentation 13020219098042-phpapp02 (1)

ateeq85905

ccna presentation

Yasser Mahfouz

Improved eaack develop secure intrusion detection system for mane ts using hy...

Kumar Dlk

Lan switching & wirless lecture # 1

SaifullahSiddiqui7

C017371624

IOSR Journals

IOSR Journal of Computer Engineering (IOSR-JCE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of computer engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in computer technology. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.

Efficient IOT Based Sensor Data Analysis in Wireless Sensor Networks with Cloud

iosrjce

International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.

Eb35725731

IJERA Editor

Presentation_1[1].pptx

Iot

Ccna day1

Ccna day1

C C N A Day1

Ccna day1

Similar to I am exploring the basic components of advanced broadband networks..pdf (20)

Introduction to IoT - Unit I

F04503057062

Analysis Of Wireless Sensor Network Routing Protocols

Ccna presentation{complete]

Frame Relay

important network terminologies

Glossary of introduction to networks

Ccnapresentation 13020219098042-phpapp02 (1)

ccna presentation

Improved eaack develop secure intrusion detection system for mane ts using hy...

Lan switching & wirless lecture # 1

C017371624

Efficient IOT Based Sensor Data Analysis in Wireless Sensor Networks with Cloud

Eb35725731

Presentation_1[1].pptx

Iot

Ccna day1

C C N A Day1

Ccna day1

More from anjandavid

How many different instances of the \"ls\" command are installed on your linux machine, and what is/are the location(s) path i.e. what is the complete path for each? Solution ls is one of the basic command in Linux. This command lists or displays files or directories. ls command runs with different parameters or instances like ls -l means long listing format ls -a displays all files with hidden files ls -lh show size of files To find where a particular command is stored use whereis command e:g whereis ls outputs Output: ls: /bin/ls /usr/share/man/man1p/ls.1p.gz /usr/share/man/man1/ls.1.gz.

How many different instances of the ls command are installed on .pdf

anjandavid

How are the Allen Bradley SLC 500 program files organized Solution Allen Bradley SLC 500 program files include System Functions, Reserved, User Program and Subroutine Programs. System Functions are of file 0, Reserved are of file 1, User Program are of file 2 and Subroutine Programs are of file 3-255. System Functions file contains various system related information and user programmed information. User programmed information are processor type, I/O configuration, processor file name and password. Reserved file is reserved by the processor and user cannot access these files. User program files contain user programmed instructions. These instructions define how the controller should operate. Subroutine programs are created by users and are activated based on subroutine instructions which are in the main ladder program file..

How are the Allen Bradley SLC 500 program files organizedSolutio.pdf

anjandavid

Hi, I need help please, this is about Kaseya: Wich o the following pages has the ability to configure and apply the ATSE code: ____Monitor > Agent Monitoring > Event Log Alerts ____Monitor > Agent Monitoring > SNMP Traps Alert ____Monitor > Agent Monitoring > Alerts ____Monitor > Agent Monitoring > Monitor Log ____Monitor > SNMP Monitoring > Assign SNMP ____Monitor > Agent Monitoring > SNMP Log Solution The answer to this is the first one Monitor > Agent Monitoring > Event Log Alerts has the ability to configure and apply the ATSE code.

Hi, I need help please, this is about KaseyaWich o the following .pdf

anjandavid

How did WWI and its aftermath provide African Americans with opportunities? Discuss W.E.B. DuBois and the rise of the NAACP. Discuss Marcus Garvey and the rise of Garveyism. 5-7 sentences for answer Solution For most of the African American soldiers, serving in World War I had provided them a broaden social , political, geographical and cultural acceptance in the society, As they received the opportunity to travel the different locations of the country, and more than 200000 African- American soldiers served in other countries to various part of the globe, had really improved the life experience to these soldiers. NAACP was founded on 12th Feb 1909 and it is considered to be the oldest, largest and most widely recognized grassroots-based civil right organization in the United States. NAACP was mainly constituted in response to the increasing horrific incidents of lynching and the race riots which resulted in the year 1908 in Springfield. Following the racial violence against the Afro- Americans, Mary White Ovington, and Oswald Garrison Villard, both the descendants of abolitionists, William English Walling and Dr. Henry Moscowitz issued a call for a meeting to discuss racial justice. Almost 60 individuals out of them 7 were Afro-American including W. E. B. Du Bois, Ida B. Wells-Barnett, and Mary Church Terrell signed a declaration which was released on the occasion of the centennial of Lincoln’s birth..

How did WWI and its aftermath provide African Americans with opportu.pdf

anjandavid

For problems 3 and 4, consider the following functions that implement the dequeue operation for a priority queue that is implemented with a heap. int[] pQueue; int length; int dequeue() { int node = 1; int value = pQueue[--length]; int maxValue = pQueue[node]; int location = sift(node * 2, value); pQueue[location] = value; return maxValue; } int sift(int node, int value) { if (node <= length) { if (node < length && pQueue[node] < pQueue[node + 1]) node++; if (value < pQueue[node]) { pQueue[node / 2] = pQueue[node]; return sift(node * 2, value); } } return node / 2; } 3. Write the recurrence equation and initial conditions that expresses the execution time cost for the sift function in the above algorithm. Draw the recursion tree assuming that n = 8. Assume that n represents the number of nodes in the subtree at each step of the sifting operation. 4. Determine the critical exponent for the recurrence equation in problem 3. Apply the Little Master Theorem to solve that equation specifically stating which part of the theorem is applied to arrive at the solution. Solution using System.Collections; using System.Collections.Generic; namespace PriorityQueueDemo { /// /// Priority queue based on binary heap in program, /// Elements with minimum priority dequeued first in program /// /// Type of priorities /// Type of values public class PriorityQueues : ICollection> { private List> _baseHeap; private IComparer _comparers; #region Constructor /// /// Initializes a new instance of priority queue with default initial capacity and default priority comparer in program /// public PriorityQueues() : this(Comparers.Default) { } /// /// Initializes a new instance of priority queue with specified initial capacity and default priority comparer in program /// /// initial capacity public PriorityQueues(int capacity) : this(capacity, Comparers.Default) { } /// /// Initializes a new instance of priority queue with specified initial capacity and specified priority comparer in program /// /// initial capacity /// priority comparer public PriorityQueues(int capacity, IComparers comparer) { if (comparer == null) throw new ArgumentNullException(); _baseHeaps = new List>(capacity); _comparers= comparer; } /// /// Initializes a new instance of priority queue with default initial capacity and specified priority comparer in program /// /// priority comparer public PriorityQueues(IComparer comparers) { if (comparers == null) throw new ArgumentNullException(); _baseHeap = new List>(); _comparer = comparers; } /// /// Initializes a new instance of priority queue with specified data and default priority comparer in program /// /// data to be inserted into priority queue in program public PriorityQueues(IEnumerable> data) : this(data, Comparers.Default) { } /// /// Initializes a new instance of priority queue with specified data and specified priority comparer in program /// /// data to be inserted into priority queue /// priority comparer in program public PriorityQueue(IEnumer.

For problems 3 and 4, consider the following functions that implemen.pdf

anjandavid

Give an example of a system. What are the Components, Attributes, and Relationship of the system? Give an example of a system. What are the Components, Attributes, and Relationship of the system? Solution An arrangement of point by point techniques, procedures and schedules made to do a particular action, play out an obligation, or take care of an issue. And no more fundamental level, frameworks are partitioned into two classifications: (1) Closed systems theoretical systems that don\'t associate with the environment and are not impacted by its surroundings.Only the components inside the system are noteworthy. Example: a sealed jug - nothing enters or leaves the jug, however whatever is inside can interact. (2) Open systems real-world systems whose limits permit exchanges of energy, material and data with the external environment or system in which they exist. Examples: an organization - regardless of whether there are separate divisions in a single association, the specialists share information and connect with each other once a day. Diverse systems procedures, (for example, dynamics and systems thinking) characterize systems differently. Component # 1. System: Each piece of the greater entire is a sub-system. These parts make the entire association. Each sub-system is a piece of the bigger system which, thusly, is sub system of a still bigger framework. For instance, division is a sub-arrangement of the association which is a sub- arrangement of the business, which, additionally is a sub-arrangement of the national economy which is a sub-arrangement of the world economy. Part # 2. Synergy: The aggregate of parts is not as much as that of the entirety. On the off chance that each division works autonomously, add up to yield would be not as much as what is created by them together. Synergy defines relationships among all parts of the association e.g., if production and marketing departments have autonomous sub-departments to give them fund or work, it will be less proficient than a system where both (production and marketing department) are associated with one back or staff branch of the association all in all. In this manner, system approach does not simply discussion of the parts and their sub-parts yet additionally their course of action. All the parts and sub-parts are arranged in such a manner that output of the whole (accomplished through coordination among sub systems) is more than the aggregate of the yield of individual parts. Component # 3. Open and closed system: System can be open or closed. Open system effectively cooperates with environment. It gets contributions as raw material, work, capital, administrative and specialized skill from the earth and offers yields (goods and services) to the society. The Administration (framing the policies and imposing taxes) and contenders additionally connect with business associations. A closed system has no or very little interaction with the environment. For all intents and purposes, all as.

Give an example of a system. What are the Components, Attributes,.pdf

anjandavid

Discuss the attribution process and attribution errors Solution Attribution is the process of inferring the causes of events or behaviors, this is something we do many times during the day without us noticing. For example, if you fail to enter into the college you wanted you might blame the committee that accepts or declines candidates that they didn’t put attention to your grades or your extra work, or when you have a bad score on a test you might blame the teacher for not explaining correctly. Attribution errors happen usually when it comes to other people, we tend to attribute causes to characteristics of people ignoring external variables, and for example when we blame someone else for a problem over which they didn’t have control. References: Jaspars, J., Fincham, F.D., & Hewstone, M. (1983). Attribution Theory and Research: Conceptual Developmental and Social Dimensions. Academic Press..

Discuss the attribution process and attribution errorsSolution.pdf

anjandavid

E, an individual, received $40,000 of non-eligible dividends from Canadian corporations in the current year. What amount is included in E’s net income for tax purposes for the current year? Solution When an individual receives non-eligible dividend from a Canadian Corporation, it is grossed up to 116%. Thus, the amount included in E\'s net income for tax purposes for current year would be =116%*$40000= $46400.

E, an individual, received $40,000 of non-eligible dividends from Ca.pdf

anjandavid

Describe one (1) example in which laws granting freedom of the press resulted in the exposure of political or business corruption. Solution hi, below is the answer to ypur question Freedom of the press or freedom of the media is the freedom of communication and expression through mediums including various electronic media and published materials. While such freedom mostly implies the absence of interference from an overreaching state, its preservation may be sought through constitutional or other legal protections. The freedom of the press has been found to be a potentally good mechanism as external control oncorruption, particularly because it seems to be effective against both extortive and collusive corruption. As it has been explained before, the media and in particular the freedom of the press, have a role inreducing corruption. The tangible way they act can take a variety of forms. Reporting, for example,may induce the public bodies to start formal investigation into claims of corruption. In addition,new sources disclose what public anti-corruption bodies have found, reinforcing in this way thelegitimacy of these bodies. So, when journalism shows the faults and the corruption involved in thedifferent bodies of the state, corruption starts to be investigated. Moreover, if the public pressurethat follows leads to a reform of these bodies, the long-run effectiveness of the media to play as acounterbalance against corruption is reinforced.Additionally, intangible effects may also result. These can be defined as those controls oncorruption, which are generated from a broader social environment of increased political pluralism,sharpened public discussion and an expanded sense of accountability among political bodies andinstitutions, which derive from independent media. The Telegraph exposes a massive culture of expenses abuse by MPs Giving politicians any sort of control over the media is a frightening prospect especially when you consider its role in exposing their mistakes, abuses of power and, in some cases, corruption. A look back over the last 60 years yields any number of examples of politicians who have misbehaved and who have been brought to book by the dogged and noble efforts of reporters and their editors. In 1963, Secretary of State for War John Profumo had an affair with Christine Keeler, the reputed mistress of an alleged Soviet spy. He lied to the House of Commons about it and when the newspapers revealed all, he resigned. MP Neil Hamilton was investigated by the Guardian and in 1994 an article claimed he had received cash in a brown envelope from Mohamed Al-Fayed, the owner of Harrods, to ask questions on behalf of Al-Fayed in the Commons. He claimed his innocence but was forced to resign. Neil Hamilton MP was caught up in the \'cash for questions\' scandal Former Tory cabinet minister Jonathan Aitken was investigated by the Guardian and World In Action for corrupt deals with leading Saudi Arabians. He said he would fight the .

Describe one (1) example in which laws granting freedom of the press.pdf

anjandavid

Briefly discuss 3â€“5 key trends in the modern health care operational environment that may have an impact on the effective leadership and management of a hospital or health care organization. Solution Trend #1 : Usage of HIT stands for Health Information Technology platforms. Electronic Health Records or EHR\'s are digitized patient records & medical history that can be updated on a real time basis and reviewed. These are a good example of the integration of information technology with health care. EHR Interoperability Wireless devices are known to interfere with the smooth operation of health care systems. Wireless devices are known to interfere with pacemaker, MRI\'s . Xrays , CAT scans etc. However with HIT and EHR\'s introducing interoperability into their systems. its important to transition health care technology into a wireless world. In healthcare, interoperability is the ability of different information technology systems and software applications to communicate, exchange data, and use the information that has been exchanged. It\'s impact on the effective leadership and management of a hospital or health care organization Health care organisations will need to address the following changes in order to keep up with the trend in the health care industry EHR downtime : Since EHR\'s are basically hardware and software, like all systems they may face outages, system down times and hacking (as seen during the recent attack by the ransom ware virus on UK hospitals where they couldn\'t access patient records). These are complex systems and require strong enterprise grade IT support. With EHR\'s becoming increasingly complex with a vast number of variables, there have been a significant increase in outages and downtime resulting in hospitals not having access to patient records, real time diagnosis tools etc. Miscommunication of Data between between different components of EHR : As i mentioned before EHR comprises of both hardware and software. Software systems are often linked to hardware systems that interface with patients such as X ray, MRI, life support systems etc. Sometimes, the manufacturer of the hardware and software may not be the same and this could cause a certain degree of discrepancies. In other cases even when the manufacturer of the hardware and software components were the same , there was a fair degree of miscommunication between various components. Alarm Fatigue Alarm fatigue is a scenario where health care workers may normalise to alerts or alarms triggered by EHR\'s. This desensitisation is often caused due to either false alarms or a high frequency of low priority alarms being triggered by EHRs. When EHR\'s trigger alarms, health care workers may brush it off as a low priority alarm when it might be quite the opposite. This removes the sense of urgency causing real emergencies to be neglected. This could lead to serious deterioration in patient\'s health and in some cases death. While EHR\'s can do many things and capt.

Briefly discuss 3â€“5 key trends in the modern health care operation.pdf

anjandavid

A student obtained the following data: Mass of water in calorimeter 31.633 g Mass of metal Temperature of metal Initial T of water in calorimeter Highest T obtained 75.224 g 98.6 C 23.2 C 47.4 C what is T of the metal in C-round off to correct number of significant digits Answer Solution Change in temperature of metal ,dT= initial temperature of metal- highest temperature of the system dT= 98.6 - 47.4 = 51.2 oC.

A student obtained the following data Mass of water in calorimeter 3.pdf

anjandavid

All answers must be in your own words. What is importance of the Walnut Street Jail? Solution Walnut street jail in Philadelphia, Pennsylvania was first opened in 1775, which brought the concepts of prison architecture and prison administration in the modern American history. The building was designed in such a way that it could hold groups of prisoners in a room. The cells & corridors were connected in such a way that prisoners could not communicate with each other. Thus it was the first prison especially designed & managed for prison activities. Initially it served as a holding facility for accused till they were convicted. After conviction offenders faced harsh punishments including the stocks, whippings, brandings, and beatings. But during a period of reforms humanitarians in Philadelphia & Quakers came to realize that cruelty & harsh punishment are of little help to deter from crime. They successfully advocated for combating crime through solitary confinement, isolation & labor. Quakers specially believed in penitence & self-examination to achieve salvation. Therefore a new era of isolating prisoners started in walnut street jail consider to be first of such an experiment in the US prison system. All prisoners were sentenced to labor where they were given tasks of weaving, nail making shoemaking & carding wool. Due to the efforts of Quakers a part of walnut street jail was converted into the penitentiary house for serious offenders which is consider first of such a facility in the United States. This penitentiary house was built due to the humanitarian efforts of Quakers who thought cruelty & harsh punishment are of little help to deter from crime. Thus such prisoners were sentenced to solitary confinement in individual cells. This system later became famous as ‘Pennsylvanian system’. Another importance of Wall nut street jail is that first manned balloon flight was organized in the prison yard of this jail..

All answers must be in your own words.What is importance of the Wa.pdf

anjandavid

Can someone please fix my code for a hashtable frequencey counter: Implement a Java program that counts word frequencies in a text file. Use a hashtable to store the data the words are the keys, and their frequencies are the values. The output of the program is the complete list of all the words and their frequencies in descending order of frequencies when two words have the same frequency, output them by alphabetical order. Each line of output consists of a word, a tab, and the frequency. A sample input is \"The Tragedy of Hamlet, Prince of Denmark\", in the file Hamlet When processing the text, you should keep just the words, and discard all punctuation marks, digits, and so on. You also need to turn all upper case letters to lower cases. Solution Your code is fine except for apostrophe was also being replacced by space because you were replaceing everything other than alphabets with space. I put apostrophe in exclusion list and then processed that seperately. Check the code below import java.io.File; import java.io.FileNotFoundException; import java.util.*; import java.util.ArrayList; /** * Created by abdul on 2/6/2017. */ public class WordCounter { public static String finalWord(String str) { String processedWord = str.replaceAll(\"[^a-zA-Z\']\", \" \").toLowerCase(); processedWord = processedWord.replaceAll(\"[\']\", \"\"); // replace \' with empty string return processedWord; } private Hashtable hash = new Hashtable(); public void fileInput() throws FileNotFoundException { File text = new File(\"E:/Shake.txt\"); String word; int count = 1; Scanner in = new Scanner(text); ArrayList list = new ArrayList<>(); while (in.hasNextLine()) { String line = in.nextLine(); line = finalWord(line); StringTokenizer st = new StringTokenizer(line); while (st.hasMoreTokens()) { word = st.nextToken(); if (hash.containsKey(word)) { hash.put(word, hash.get(word) + 1); //int count = (Integer) hash.get(word); //hash.put(word, count + 1); count++; } else { hash.put(word, 1); count = 1; } } } Map map = new TreeMap(hash); //System.out.println(map); Set set = map.entrySet(); Iterator i = set.iterator(); while(i.hasNext()){ Map.Entry me = (Map.Entry)i.next(); System.out.print(me.getKey() + \" \"); System.out.println(me.getValue()); } } public static void main (String[]args) throws FileNotFoundException { WordCounter abc = new WordCounter(); abc.fileInput(); } }.

Can someone please fix my code for a hashtable frequencey counter I.pdf

anjandavid

A polycationic mRNA contains two or more promoter sequences. True False Solution Answer-False Description-operon is a functioning unit of genomic DNA containing a cluster of genes under the control of a single promoter.The genes are transcribed together into an mRNA strand and translated together in the cytoplasm, to create monocistronic mRNAs that are translated separately. several strands of mRNA that each encode a single gene productoperon contains one or more structural genes which are generally transcribed into one polycistronic mRNA-a single mRNA molecule that codes for more than one protein. the structural genes lies a promoter sequence which provides a site for RNA polymerase to bind and initiate transcription.Polycistronic mRNA is a mRNA that encodes several proteins and is characteristic of many bacterial and chloroplast mRNAs. Polycistronic mRNAs consist of a leader sequence which precedes the first gene. The gene is followed by an intercistronic region and then another gene. A trailer sequence follows the last gene in the mRNA. Examples of a polycistronic transcripts are found in the chloroplast.

A polycationic mRNA contains two or more promoter sequences. True Fal.pdf

anjandavid

Why are electrons shared in molecular compounds? Why are electrons shared in molecular compounds? Solution Electrons are shared because the atoms and elements don’t exist or aren’t stable in their crude form. They need to complete their o outermost shell to become stable. They need to complete the octet rule. Any substance in nature prefers a low energy form and is thermodynamically stable at that lower energy, hence atoms need to follow the octet rule. In doing so they form molecular compounds, when they share their electrons with each other, hence completing and satisfying each other. Sharing leads to formation of a Covalent bond between the 2 atoms. Sharing of atoms mostly happens in non metals , metalloids and other electronegative atoms..

Why are electrons shared in molecular compoundsWhy are electron.pdf

anjandavid

Which of these is/are true of UDP?a. It provides reliability, flow-control, and error-recovery functions. Solution Answer: b. It functions basically like a transport-layer equivalent of IP. c. Its simplicity means its headers contain fewer bytes and consume less network overhead than TCP UDP is a cnnection less transport layer protocol that provides no reliability, flow-control, and error-recovery functions. Its simplicity means its headers contain fewer bytes and consume less network overhead than TCP. It functions basically like a transport-layer equivalent of IP..

Which of these isare true of UDPa. It provides reliability, flow-c.pdf

anjandavid

Which liquid would BaCl Which liquid would BaCl 4. Which liquid.pdf

anjandavid

What is employee involvement What are some of the benefits of invol.pdf

anjandavid

What are the pros and cons of technological leader versus technological follower as a functional strategy? Do you believe a follower can become a leader? Why or why not? Explain your answer Solution Technological leaders are the people who predict the changes in techology in early, who fosters technological innovation, who understands the technology life cycle clearly, and use all these for benefit of the business. These people takes initiation for commercialization of these technological advances, they link all these with business, manage research & development in technology area and understand technological revolutions. Some of the times, due to early predictions, these people may not able to concentrate on the running technologies and may focus on next trends of technologies. It does not help them to achieve the present and current goals. This kind of attitude will be become a burden to the organization in many ways. If every one be like this and do like this, the regular activities of the business entity may not go further. The followers may not always go with the leaders in this area because of many limitations. Leaders have a freedome to select their activities and to plan their actions, where the followers have some duties and obligations to deliver and perform. In my openion, a follower never becomes a leader. Leadership is a seperate category of peole and they have some raw heridity from their birth only. Leadership is not a skill where can be learned from others or by experience. It is a characteristic which should be inculcate from their innersense. These people have some unique, special, and different ideology than others, and make them to become leaders. Some of the people says that leaders can be made but not born. It is completely wrong, a simple example: Martin Luther King is the first person who fought against the racism in US. But before him and after him many lakhs of people born in the community, why not all these people raise their voice in a strategic and purposeful way? Similarly Mahatma Gandhi, Nelson Mandela, Mother Theressa, all these people born with some special characteristics, when the time comes they show the abilities. But no others done this. What i mean to say is, leaders born with some raw heridity related to leadership, when the time comes they only react and stand first, the remaining, who trust the leaders, become followers. And a follower never becomes a leader..

What are the pros and cons of technological leader versus technologi.pdf

anjandavid

What are the benefits of using the Theory X and Theory Y management theory in a development process? What are the downsides to this particular theory? Provide examples of other leaders successfully implementing the management theory. Solution Benefits of Theory X and Theory Y in a development process: Disadvantages: Example: Steve jobs had a good behaviour of follow up for the task at hand and assisting people overcome their trouble. CEO of Unilever Paul Polman focuses on autonomy and hence has created a different organizational structure including PACE team to focus specifically on projects..

What are the benefits of using the Theory X and Theory Y management .pdf

anjandavid

More from anjandavid (20)