Engineering, technologist, technicians

1. Question Excerpt
Jonathan fabian salas
1. Always examine the tool for damages before use.A. True

2. 1. Always examine the tool for damages
before use.
A. True
B. False
• A:TRUE

3. 2. It is OK to wear loose clothing, dangling
objects and jewellery using hand tool.
A. True
B. False
• B:FALSE

4. 3. Keep cords and hoses away from heat, oil
and sharp edges.
A. True
B. False
• A:TRUE

5. 4. Use only tools and equipment in good
condition.
A. True
B. False
• A:TRUE

6. 5. It is OK to make adjustments or clear a
jam while the power tool is running.
A. True
B. False
• B:FALSE

7. 6. If any tool breaks or malfunctions, report
it to your supervisor immediately.
A. True
B. False
• A:TRUE

8. 7. Before connecting to a power source,
make sure the power is on.
A. True
B. False
• B:FALSE

9. 8. Safety glasses shall always be worn
whenever you are using power hand tool.
A. True
B. False
• A:TRUE

10. 9. There are several types of power tools,
including electric, pneumatic, hydraulic.
A. True
B. False
• A:TRUE

11. 10. Never use electric tools in wet conditions.
A. True
B. False
• A:TRUE

12. 11. When not in use, power tools should be
disconnected.
A. True
B. False
• A:TRUE

13. 12. Keep safe distance between your hands
and all moving parts of the power tool.
A. True
B. False
• A:TRUE

14. 13. Don’t leave a power tool unattended while
it is running.
A. True
B. False
• A:TRUE

15. 14. It is OK to startle someone who is using a
power tool.
A. True
B. False
• B:FALSE

16. 15. Use safety guards exactly as they are
supposed to be used.
A. True
B. False
• A:TRUE

17. 16. When tightening a nut with an adjustable
wrench, always pull the wrench toward you;
never push the wrench away from you.
A. True
B. False• B:FALSE

18. 17. Plastic covered handles on wire-cutting
pliers may be used to cut low-voltage live
electrical wire.
A. True
B. False
• B:FALSE

19. other than driving or removing screws, for
example as a chisel.
A. Ture
B. False
• B:FALSE

20. 19. When selecting a standard screwdriver
be certain that the tip is almost as thick and
as wide as the slot of the head of a screw.
A. True
B. False• A:TRUE

21. 20. When using a hacksaw, safety glasses must
be worn.
A. True
B. False
• A:TRUE

22. 21. When you are finished using a hacksaw,
tension should be eased.
A. True
B. False
• A:TRUE