What are the phases of SDLC Please select one of the SDLC phases an.pdf

•

0 likes•3 views

What are the phases of SDLC? Please select one of the SDLC phases and describe it. What should be accomplished in that phase? Solution Phases of SLDC (Software Development Life Cycle): Let us describe “Requirement gathering and analysis” Phase of SLDC Basically this is the start phase to gather and understand the business requirement. The main focus to meet the client and focus of project managers is to engage the stakeholders. Meeting with Stakeholders will help to determine the requirements such as who is going to use the system? How will they use the system? What data should be input into the system? What data should be output by the system? These are general questions that get answered during a requirements gathering phase. Basically requirement is listed and scope of project is prepared. An Action plan is prepared to create timelines and process management..

Education

Similar to What are the phases of SDLC Please select one of the SDLC phases an.pdf

What is jad_session

madmoneydallas

SDLC Module 2 from IFSM 201 - Overview.docx From IFSM 201 - Module 2: Information System Development Module 2: Information System Development Overview Today's information systems consist of more than just hardware and software. They include enterprise environmental factors (people, company culture, and legacy systems) and organizational process assets (processes, procedures, and historical information). The foundation for designing, developing, and implementing these complex systems is a structured process known as the systems development life cycle (SDLC). SDLC is based on the concept that information systems must pass through a series of phases during their existence or life cycle. In this module, we will help you understand life-cycle methodology and the way SDLC is used to design, develop, and implement information systems. In this module, we examine the following topics: Purpose of System Development Life Cycle (SDLC) In this section, we discuss why the SDLC is used to design, develop, and implement information systems. The SDLC Phases In this section, we focus on the states or stages in an information system's life cycle. SDLC Models In this section, we examine several SDLC models and their uses. Relationship between SDLC and Project Management In this section, we close out the module by discussing how project management is used to plan, manage, and control the SDLC process. Report broken links or any other problems on this page. Copyright © by University of Maryland University College. SDLC Module 2 from IFSM 201 - Outcomes.docx From IFSM 201 - Module 2: Information System Development Module 2: Information System Development After completing this module, you should be able to:  define systems development life cycle (SDLC)  explain the purpose of using SDLC on information systems projects  describe the SDLC phases  identify and describe several SDLC models  describe how SDLC is used to design, develop, and implement information systems Report broken links or any other problems on this page. Copyright © by University of Maryland University College. From IFSM 201 - Module 2: Information System Development Commentary Topics  Purpose of the Systems Development Life Cycle (SDLC)  The SDLC Phases  SDLC Models  Relationship between SDLC and Project Management  Summary Purpose of the Systems Development Life Cycle (SDLC) What Is SDLC? The systems development life cycle (SDLC) is a structured methodology and process that guides the development of information systems. SDLC is based on a series of related activities that are combined into phases, sometimes called life-cycle phases. The phases represent a state or stage in the life of an information system. Generally speaking, an information system life cycle proceeds from requirements gathering to design and development to operations and maintenance to decommissioning. Each successive phase ...

SDLC Module 2 from IFSM 201 - Overview.docx From IFSM .docx

joyjonna282

ppt on sOFTWARE DEVELOPMENT LIFE CYCLE

Swarnima Tiwari

STLC & SDLC-ppt-1.pptx

ssusere4c6aa

System development life cycle

NITISH SADOTRA

Mcom Ba Training Module 1

mcom

4 sdlc and stlc

Chandra Maddigapu

Business Analyst Overview

Salil Vaidya

Software Developement Life Cycle ppt.pptx

AbcXyz141938

The System Development Life Cycle

Megan Espinoza

Testing material (1).docx

KVamshiKrishna5

Software developement life cycle ppt

OECLIB Odisha Electronics Control Library

Sdlc tutorial

Suresh Mca

Sdlc tutorial

Edress Oryakhail

system development life cycle

SuhleemAhmd

This document will guide you about the procedures that Konstant follow in the Requirement Gathering Phase once the project is awarded to Konstant. As Konstant understands that requirement gathering is a vital part of successful project management and application development. We don’t want to blame the customers for not being sufficiently clear about their business requirements. Sometime clients/users are guided through a process that elicits their business requirements and facilitates accurate application development, but our analysts are well versed in both understanding the concepts of business requirement gathering AND the process that will best document them.

Whitepaper - Project Analysis Process at Konstant

Konstant Infosolutions Pvt. Ltd.

Ooad lab manual(original)

dipenpatelpatel

Software Development Life Cycle (SDLC)

Subodh Kumar

Software Development Life Cycle.pptx

DhruvGaur24

The Requirements - An Initial Overview

Kumail Raza

Similar to What are the phases of SDLC Please select one of the SDLC phases an.pdf (20)

What is jad_session

SDLC Module 2 from IFSM 201 - Overview.docx From IFSM .docx

ppt on sOFTWARE DEVELOPMENT LIFE CYCLE

STLC & SDLC-ppt-1.pptx

System development life cycle

Mcom Ba Training Module 1

4 sdlc and stlc

Business Analyst Overview

Software Developement Life Cycle ppt.pptx

The System Development Life Cycle

Testing material (1).docx

Software developement life cycle ppt

Sdlc tutorial

system development life cycle

Whitepaper - Project Analysis Process at Konstant

Ooad lab manual(original)

Software Development Life Cycle (SDLC)

Software Development Life Cycle.pptx

The Requirements - An Initial Overview

More from anaxeetech

What are the similarities and differences between the major politica.pdf

anaxeetech

What are the properties of a normal distribution? Why there are an infinite number of normal distributions? Do you want to assume that your sample data represent a population distribution? Solution Properties: Function f(x) is unimodal and symmetric around the point x = µ, which is at the same time the mode, the median and the mean of the distribution.[8] The inflection points of the curve occur one standard deviation away from the mean (i.e., at x = µ - s and x = µ + s).[8] Function f(x) is log-concave.[8] The standard normal density ?(x) is an eigenfunction of the Fourier transform. The function is supersmooth of order 2, implying that it is infinitely differentiable.[9] The first derivative of ?(x) is ?\'(x) = -x·?(x); the second derivative is ?\'\'(x) = (x2 - 1)?(x). More generally, the n-th derivative is given by ?(n)(x) = (-1)nHn(x)?(x), where Hn is the Hermite polynomial of order n.[10] When s2 = 0, the density function doesn\'t exist. However a generalized function that defines a measure on the real line, and it can be used to calculate, for example, expected value is where d(x) is the Dirac delta function which is equal to infinity at x = 0 and is zero elsewhere. The normal distribution is a continuous distribution defined by two parameters, the mean and the variance. since the variance can be any positive value and the mean can be any real value there are infinitely many different values for the mean and for the variance..

What are the properties of a normal distribution Why there are an i.pdf

anaxeetech

What are the revenue classifications of the U.S. based for-hire air carriers? Define and describe at least two of these classifications with examples. Solution of Airline Certification U.S. scheduled airlines are classified by the government on the basis of the amount of revenue generated from operations. These classifications are major, national and regional. All airlines hold two certificates from the federal government: a fitness certificate and an operating certificate. The Department of Transportation (DOT) issues fitness certificates - called certificates of public convenience and necessity - under it\'s statutory authority. Basically, the certificate establishes that the carrier has the financing and the management in place to provide scheduled service. The certificate typically authorizes both passenger and cargo service. Some airlines, however, obtain only cargo-service authority. Commuter airlines that use aircraft with a seating capacity of 60 or fewer seats or a maximum payload capacity of no more than 18,000 pounds can operate under the alternative authority of Part 298 of DOT\'s economic regulations. Operating certificates, on the other hand, are issued by the Federal Aviation Administration (FAA) under Part 121 of the Federal Aviation Regulations (FARs), which spell out numerous requirements for operating aircraft with 10 or more seats. The requirements cover such things as the training of flight crews and aircraft maintenance programs. All majors, nationals and regional\'s operate with a Part 121 certificate. Majors Major airlines generate operating revenues of more than $1 billion annually. Previously called trunk carriers, they generally provide nationwide, and in some cases, worldwide service. There are many major U.S. passenger airlines such as: Alaska, American, American Eagle, Continental, Delta, Northwest, Southwest, United and US Airways. In addition, some cargo airlines are classified as majors like: FedEx and United Parcel Service. Nationals National carriers are scheduled airlines with annual operating revenues between $100 million and $1 billion. Many of the airlines in this category serve particular regions of the country, although some provide long-haul and even international service. Among the nationals are some of the former local service lines that, prior to deregulation, were licensed by the Civil Aeronautics Board (CAB) to operate between major cities and smaller communities surrounding them. Also in this category are some of the former supplemental carriers, previously licensed by the CAB to operate unscheduled charter service, which supplemented the capacity of the trunk carriers. Like the majors, nationals operate mostly medium- and large-sized jets. They are subject to DOT fitness requirements, as well as the FAA Part 121 operating requirements. Some of the nationals you may have heard of in the past include companies like Aloha, Atlas Air, Emery Worldwide, Evergreen, Hawaiian, Midwest Express and Polar .

What are the revenue classifications of the U.S. based for-hire air .pdf

anaxeetech

What are the requirements that must be met before the Kruskal-Wallis one-way analysis of variance by ranks test can be applied? Solution there are foolwing limitations and assumptions for this method Limitations: Only oneindependent variable Assumptions: Samples are randomly selected. Samples are representative of the populations. Samples are independent of one another. The original variable that was measured was a continuousrandom variable (this assumption is often violated – no idea if that’s OK or not, but Sheskin does not seem to think it is a big deal). The distributions of the populations are identical in shape. i hope it would help you.

What are the requirements that must be met before the Kruskal-Wallis.pdf

anaxeetech

What are the psychometric properties of The MBTI for bulimia and /or eating disorders? Solution The Myers-Briggs Type Indicator® (MBTI®) instrument is a questionnaire designed to make Jung’s ideas about psychological type useful in everyday life. It identifies a person’s four basic type preferences that combine into one of 16 different personality types. These results help you understand normal differences in the way people think, communicate, and interact—differences that can be the source of much misunderstanding. The MBTI instrument has been used for more than 50 years to establish greater understanding between individuals, and has been translated into more than 15 different languages for use around the world. Research conducted on the MBTI tool has shown that the results it provides are reliable and valid. The MBTI tool’s reliability statistics are excellent, and its validity has been firmly established in hundreds of separate studies. Reliability refers to whether the results are consistent: Do people tend to reply to the items in the same way when they take the test later, and do they tend to get the same type? Can you count on the results? Validity refers to the instrument’s ability to measure psychological type and apply Jung’s theory. Technical information on the research and psychometric properties underlying the instrument are published in the MBTI® Manual and in other scientific publications..

What are the psychometric properties of The MBTI for bulimia and or.pdf

anaxeetech

What are the pros and cons of an intranet-based performance management system compared to a paper based system? Solution Pros of an intranet based management system: 1. Information can be transmitted at a very fast rate. Almost instantly. 2. Mobility of data and information. A person sitting in the UK office can access files on the intranet from the US office. 3. Real-time updates can be sent to employees at various locations globally 4. Company can achieve the go-green initiative by using less paper so it is environmental friendly Cons of an intranet based management system: 1. Information can be misused as it is so easily available 2. Cyber crime can be a threat to the organization 3. Cost of implementing the intranet is high as compared to a paper based management system 4. Flexibility can be a concern if people cannot easily adapt to the intranet system.

What are the pros and cons of an intranet-based performance manageme.pdf

anaxeetech

what are the privacy and security issues of using CHINS-community health information network. how we can solve these issues. provide articles. Solution ?The application of CHINs in the implementation of disease management programmes has many benefits including shared data, internal communication, external communication, value-added applications, bonding and marketing presence. However, there are also problems and pitfalls of an architectural and `emotional\' nature. Source: Francois M.H.M. Dupuits(Maastricht University, Department of Family Medicine, Maastricht, The Netherlands) The Congress Office of Technology Assessment reported,.

what are the privacy and security issues of using CHINS-community he.pdf

anaxeetech

What are the political and legal issues of South Africa. For instanc.pdf

anaxeetech

what are the primary differences between investor-owned and not for profit corporations? Solution Investor owned corporation Not for profit organisation Owner Owned by the shareholders Are not owned by shareholders Tax Corporations pay tax on the income Can be tax expempt if are qualified. Objective The main objective is to maximize the wealth of the shareholders The main objective is for the not maximize the wealth of the shareholders since it does not have the shareholders but is pulic welfare Wind up At the time of windup the left over assets are used to clear the debts and to pay the shareholders In the case of windup the assets are used for the charitable purpose.

what are the primary differences between investor-owned and not for .pdf

anaxeetech

What are the policies usually advocated by supply side economics? How do they justify these proposals? Solution Keynesian believes that consumers and their demand for goods and services are key economic drivers, while a supply-sider believes that producers and their willingness to create goods and services set the pace of economic growth. Supply-side claims that demand is largely irrelevant. It says that over-production and under- production are not sustainable phenomena. Supply-siders argue that when companies temporarily \"over-produce,\" excess inventory will be created, prices will subsequently fall and consumers will increase their purchases to offset the excess supply..

What are the policies usually advocated by supply side economics Ho.pdf

anaxeetech

What are the five conditions necessary for the binomial distribution.pdf

anaxeetech

What are the primary causes of job dissatisfactionSolutionThe.pdf

anaxeetech

What are the five pillars of faith Solution 1) Shahadah 2) Salah 3) Zakat 4) Sawm during Ramadan 5) Hajj In Sunni Islam, theFive Pillars of Islam is the term given tothe five duties incumbent on every Muslim. These duties areShahada (Profession ofFaith), Salat (Prayers), Zakat (Givingof Alms), Sawm (Fastingduring Ramadan) and Hajj (pilgrimage toMecca). These fivepractices are essential to Sunni Islam;Shi\'a Muslimssubscribe to eight ritual practices which substantially overlapwith the five Pillars.[1]Twelvers have fivefundamentalbeliefs which relates to Aqidah.[2].

What are the five pillars of faith Solution1) Shahadah2) .pdf

anaxeetech

What are the opportunities and threats facing Whole Foods Inc.? Solution In 1980 twenty-five year old college dropout John Mackey and twenty-one year old Rene Lawson Hardy created the Whole Food Company (WFC) in Austin, Texas. It was born with the idea to provide a grocery store featuring good, wholesome food; not a \"health food\" store filled with pills and potions. Sales doubled each year for the first four years. Opportunities.

What are the opportunities and threats facing Whole Foods Inc.S.pdf

anaxeetech

what are the disadvantages of joint ventures what are the disadvantages of joint ventures what are the disadvantages of joint ventures Solution A joint venture (JV) is a business arrangement by which, two or more entities make an arrangement by which they share assets, expertise & technology to execute a particular business venture. The parties to a JV share the liabilities and profits together. A JV can be a short-term arrangement, made to cater to a specific project only. However, there may be some disadvantages to a JV, as follows. 1) A cross-country JV has the main issue of cultural difference. It is often difficult for partner entities from different countries with different cultures, to operate efficiently enough as to create positive synergy. 2) The goals and objectives of the JV partners may not agree, which may create a friction & conflict of interest going ahead. 3) Efficient sharing of responsibilities is a pivotal aspect in a JV, in absence of which, the arrangement may collapse. 4) A JV works best in presence of perfect communication flow with no barriers, which is rarely achieved in real life. 5) Sharing of resource may be uneven, or perceived to be sub-optimal, by one or more of the partners. 6) A final disadvantage of a JV is the dispute resolution process. Due to shared responsibilities, authorities and functioning, a conflict is more difficult to get resolved, since its resolution depends on multiple levels and locations of the JV organization hierarchy..

what are the disadvantages of joint ventureswhat are the dis.pdf

anaxeetech

What are the methods of conducting trade ? Solution A business may conduct international trade using following channels and methods: (1) Direct Trade The company directly exposts its goods and services to other countries, and imports products & services from other countries. (2) Licensing. A company (X) grants another company (Y) in another country, to produce and sell X\'s products, a license to Y against a fee/royalty that Y should pay to X. Such licensing agreement may cover not only goods and services, but other intangibles like technology, copyright or patents. (3) Management Contracts These are contracts between two companies in different countries through which one company provides technical expertise or management expertise to another company. (4) Turnkey Projects One company (X) lends its resources and expertise to another company from other country (Y), in helping Y start and build new projects, from the basic planning & design stage, to the final execution stage. In exchange for this, Y pays a fee to X. (5) Joint Ventures (JV) This involves joint collaboration between 2 companies in different countries. It includes mutual sharing of all resources, including technical, financial and managerial expertise sharing. This form of trade includes sharing of both risks and rewards. (6) Wholly Owned Subsidiary This is the final form of trade where, a company sets up a fully-owned unit in another country. The parent company owns the subsidiary and controls it. This ensures maximum profit to the parent company, however, country-specific laws and political scenarios pose certain risks in such multy-country operations..

What are the methods of conducting trade SolutionA business m.pdf

anaxeetech

What are the main changes in this current global market? How do you define a global manager? What are the main responsibilities of a global manager? Solution Answer1 Economics differentiates four major market structures: perfect competition, monopoly,oligopoly and monopolistic competition. If we evaluate the changeswhich occurred in the last part of the twentieth century, we can clearly see a drasticmetamorphosis in the globalised markets: two of the above mentioned market structuresare losing ground while one of them is definitely coming into the forefront. First let ushave a look at the losers! - Perfect competition is in the process of fading out. The decrease of its importance can be traced back to two reasons: firstly sectors traditionally characterized by perfectcompetition are losing their share in the economy; secondly companies operating inthese industries to gain competitive advantage are trying to differentiate their offerings,even if they seemed to be rather homogenous in the past, from those of their competitors. If the majority of them succeed the competition is gradually transforminginto a form of imperfect competition. It is worthwhile to mention that it was Levitt whofirst drew attention to the importance of differentiation. - The share and importance of monopolies is also decreasing. In democratic societiesthere is a great pressure on government regulation to abolish monopolies, to deregulate,and liberalise these industries. The banking system, most of the mass transportation, and basic utilities have already been deregulated, and monopolies still functioning are setunder strong societal control Parallel with the decreasing importance of perfect competition and monopolies, the twoother forms of market structures are gaining ground, especially and most importantly:oligopoly. The study would like to prove that the world is moving towards the dominance of a market structure which could be called.

What are the main changes in this current global marketHow do you.pdf

anaxeetech

What are the main causes of and contributing factors to international financial crises? How can they be resolved? How can they be prevented? Answer this question in the context of the Asian Crisis of 1997. Solution Causes of Asian financial crisis-. Firstly, huge amounts of foreign capital became readily available at relatively low interest rates, as investors in search of fresh opportunities shifted huge amounts of capital into Asia. As under all boom cycles, stock and real estate prices in Asia increased initially, thus attracting further funds. But, domestic allocation of borrowed foreign capital was inefficient due to weak banking systems, inefficient corporate governance, and inadequate transparency of financial sector. Insufficient absorptive capacity also added to the inefficient allocation of foreign capital. Secondly, the economies\' exchange rate regime was fixed hence giving borrowers an illusionary sense of security, encouraging them to go for dollar- denominated borrowings. The huge capital inflows plus weakening exports were reflected in increasing current account deficits. Also, a substantial part of the capital inflows was in the form of short-term borrowing, making these economies prey to external shocks. Once the trigger started in Thailand , other markets overreacted and the crisis spread. Remedies.

What are the main causes of and contributing factors to internationa.pdf

anaxeetech

What are the main characteristics of a research study that uses inde.pdf

anaxeetech

What are the main factors that determine exchange rates? Why are exchange rates so volatile? Solution Exchange rate is the rate of currency of a country in terms of other. Factors determining exchange rate are: Exchange rate are very sensitive to the factors mentioned above. A small change in any of the above factor in any country will result in change in currency value of a country in terms of other country. Hence exchange rate keeps fluctuationg accordingto the performance of an economy on daily basis..

What are the main factors that determine exchange rates Why are exc.pdf

anaxeetech

More from anaxeetech (20)