This document summarizes a study on permeable concrete pavement conducted by Yamuna Evanjaline.V and Devadharshini.S at Muthayammal Polytechnic. It introduces permeable pavement as a structure that easily drains water compared to normal pavement. It then describes the types of permeable pavement, required materials which include PPC, coarse aggregate, fly ash and fine aggregates. It also discusses tests conducted on permeable concrete materials and the three systems of pavement - total infiltration, partial infiltration and full attenuation. Finally, it outlines the steps for installation and maintenance of permeable concrete pavement.

1. MUTHAYAMMAL POLYTECHNIC
INSTITUTION
TOPIC: STUDY OF PERMEABLE
PAVEMENT.
DONE BY: YAMUNA EVANJALINE.V
DEVADHARSHINI.S
YEAR: THIRD YEAR – CIVIL.

2. STUDY OF PERMEABLE
CONCRETE PAVEMENT

3. INTRODUCTION:
India has one of the largest road networks
in the world, aggregating to about 71 lakh
kilometer at present.
Permeable pavement is a structure that
easily drain water.

4. NORMAL PAVEMENT PERMEABLE PAVEMENT

5. PERMEABLE PAVEMENT
Allows rainwater drain trough it.
Made up of pervious concrete.
It is also know as “THIRSTY CONCRETE”.
Environmental friendly.

6. TYPES OF PERMEABLE PAVEMENT
• Permeable concrete pavement
• Permeable asphalt concrete
• Porous Paver block

7. MATERIALS REQUIRED FOR PERMEABLE
PAVEMENT:
 PPC
Coarse aggregate
Fly ash
Fine aggregates (sand)
Potable water

8. PORTLAND POZZOLANA CEMENT
(PPC)

9. COARSE AGGREGATE

10. FLY ASH

11. FINE AGGREGATE
Fine
Aggregate
Pit Sand
(Coarse sand)
River Sand
Manufactured
Sand

12. TESTS ON PERMEABLE
CONCRETE MATERIALS
Compression test on concrete.
Water absorption test.

13. COMPRESSION TEST ON
CONCRETE

14. WATER ABSORPTION TEST ON
PERMEABLE CONCRETE

15. THREE SYSTEM OF PAVEMENT
 TOTAL INFILTRATION.
 PARTIAL INFILTRATION.
 FULLATTENUATION.

16. TOTAL INFILTRATION

17. PARTIAL INFILTRATION

18. FULLATTENUATION

19. INSTALLATION OF PERMEABLE
CONCRETE PAVEMENT ARE AS
FOLLOWS:

20. 1. Preparation of sub-grade &
Sub-base

21. 2.Batching and mixing

22. 3.Transportation

23. 4.Placement.

24. 5.Joint placement

25. 6.Finishing.

26. 7.Curing

27. 8.Open to traffic

28. MAINTENANCE
 Routine maintenance.
 Periodic maintenance.
Annual maintenance.
Other maintenance.