1. William J. Crowley
Construction Manager, Electrical Construction Engineer, Electrical Inspector, Electrical Construction Coordinator,
Electrical Field Engineer, Database Manager, Electrical Design Group Leader
33990011 SShhaaffffeerr RRooaadd,, EEllllwwoooodd CCiittyy PPAA,, 1166111177
Home: 724-924-2860 Cell: 724-822-4808
wwccrroowwlleeyy22442211@@yyaahhoooo..ccoomm
http://www.linkedin.com/in/crowley063
PROFESSIONALSUMMARY
Diversified experience in all phases of engineering, construction and project management for: light and heavy industrial projects, gas
turbine simple, combined cycle and super-criticalcoal fired power plants, steel, pulp and paper mills, nuclear, aluminum, IBM computer
chip and chemical plants. Also, supervised the electrical engineering, construction, and start-up on fast-track, turnkey projects. Held
leadpositionson numerousBrownfieldandGreenfieldprojectswithapproximatevaluesof $50million to $2.0billion(+)(-).
Practice and observe “Safety with high quality standards”. Astute expertise working with Access/excel Conduit and Cable
Schedule Databases. Proficient in: maintaining dailydetailedcontemporaneous notes, scribe role, project controls, tracking of installed
quantities, bid and proposal preparation/negotiation, change order and successful claims/risk litigation experience. Ability to: apply
effective problem-solving skills, project implementation and qualityimprovement processes andmanagemultiple projects concurrently,
implementstrongorganizational,planningandtime-managementskills.
Strengths include being energetic, self-starter, effectively managing all assignments for completion in a timely, and cost effective
fashion, within scope, schedule and budget. Offer a wealth of practical experience and astute technical expertise. “A people-
orientated leader” with good follow-through skills minus the finger pointing. A valuable asset to any contractor with the influx of
cost effective, minimal RFC engineering drawings issued to the field. Also equallyas valuable as a design lead on the engineering side
with ability to work through constructability issues and exactly what level of detail is actually needed by the electrical contractor.
Experience working with union and non-union crafts. Maintained a professional set of construction as built drawing modifications for
client. Ensuring installation was per as-sold specifications, applicablecontract drawings, NEC, and all state and local codes. “Boots on
theGround”providingonsiteperspective.
PROFESSIONALEXPERIENCE
06/2016 – 09/2016 DSC - Defined Source Cooperative, 2031 North Broad ST, Suite123, Lansdale, PA 19446, Telephone 215 -
487-7800,Fax215-412-4108, www.definedsource.com
Assigned to Enviva(ENVIVA), EnvivaWilmington StatePortfacility,Bio MassPelletPortfacilityWilmington NC, 28402.
TheElectricalConstructionCoordinatorisresponsibleforconductingconstructionactivitiesrelatedtoelectrical,Instrumentationand
controls.Responsiblyfor monitoringanddocumentingconstructionPersonnelsafetyandqualityof work performed. Responsibilities
werebut not limitedto:
 Coordinatewithengineersanddevelopersinthe constructabilityandexecutionofelectricalinstallation.
 Monitorcontractorperformances;insureadherencetodesignandtechnicalspecifications.
 Coordinateconstructioneffortsto insure4continuitywithother contractorsandavoid anydisruptionof Port Operations.
 Perform site inspections for quality control and document.
 Communicate with CM or designated supervisor regarding concerns aboutconstruction progress.
 Perform other duties as requested by supervisor.
 May analyze projectinformation to determine and/or forecasttrends utilizing detailed instruction received by CM.
 Generate quantity based reports on in-in-place work completed by the contractor.
 Create and maintain necessary files.
 May provide inputconcerning resolution ofRFI. Familiarity with specifications, shop drawings, and submittals.
 Maintain projects lists and close outdocumentation.
 Interface with general contractors and subs and be detailed oriented with follow up skills.
 Respond to inquiries from projectpersonnel regarding assigned projectstatus.
 Assistin organizing work relating to specific assigned projectdeadlines.
 Coordinate the unloading, verification and documentation ofEnviva purchased equipment.
 Take the lead field role in checkoutand commissioning.

2. 2
05/2015 – 02/2016 - CH2M Hill, Environmental and Engineering Consulting, 400 Industry Drive, Coraopolis PA, 15108 Electrical
ConstructionManagerAssigned to theVoestalpineTexasLLCDirectReduction –HotBriquettingIronFacility,PortlandTX.
Responsibilitieswerebutnot limitedtothe following;
 ManagedWorkPackage(WP-13)ElectricalProcessControlandInstrumentation
 Maintainedprojectfiles–CH2M HillandSiemens/MidrexEngineeringdrawings
 Distributedcorrespondence(i.e.,dailyupdates withsite photos, RFI’s andcriticalissues),Transmittals/Submittals
 Weekly meetingswiththe contractorsonsiteand alsomeetingswithall othercontractors
 Monitoredprojectschedulewithcurrentprogress
 Attended weeklysite projectmeetings,consistedofprogressupdatesandonce-a-weeklookaheadwithVoestalpine
 “Boots on the Ground” providing daily safety observations, managed electrical installation activity of Package E-13 work in
process,coordinatinganyandallpotentialinterferenceswithother contractorsbeforetheybecameanissue
 Assisted both E-13 Electrical and Instrumentation superintendents spotting the locations of the instrument and operator control
stations throughoutallareas inthe plant as they becameavailable
07/2014– 01/2015 – HKAENTERPRISES,INC.of Duncan,SC/CH2M Hill, Pittsburgh,PA
AAssssiiggnneedd ttoo AAlllleegghheennyy TTeecchhnnoollooggiieess,, IInncc.. ((AATT II)) FFllaatt RRoolllleedd MMeettaallss,, MMiiddllaanndd,, PPAA.. Functioned as a Construction Manager (on site) over
the contractors working on the new construction of SCR unit associated with the direct reduction anneal and pickle DRAP Line at the
MidlandFacility.(SelectiveCatalytic Reduction[SCR])System -CombustionSystem Design.
Responsibilitieswerebutnot limitedtothe following;
Maintainedprojectfiles
● Distributedcorrespondence(i.e.,dailyupdates withsite photos, RFIs andcriticalissues)
● Monitoredprojectschedulewithcurrentprogress
● Dailymeetingswiththe contractorsonsite
● DistributedATI Safety Observation Sheetsfrom allcontractorsforATI
● Attended weeklysite projectmeetingswhichconsistedofprogressupdatesanda one-week-lookahead
● Coordinatedwithengineeringthecontractorrequestsfor information(RFIs)andsubmittals. an
● Coordinated andworkedwith Andritz MetalsEngineering,Constructiononequipmentdeliveriesandstoragelocationin plant
● Provided projectmanagement,projectcontrols,anddocumentcontrolservicestosupport the constructionefforts
“Boots on the Ground”for ATI providingdailysafety observations, QA, andcoordinatingalloutsidedeliveriestojobsite
Leaving site with the plantonlinerunninganda punchlistof all workyet to completeafterplantwas online.
Worked up through Cold and Hot Commissioning, coordinating with Midland Borough Building inspector and contractors on 12/2012 –
04/2014 R.T.PATTERSONCOMPANY,INC. PITTSBURGH,PA.
Assigned to Horsehead Corporation Greenfield Zinc SX/EW Plant in Mooresboro, N.C. as an Electrical Engineer/Construction
Manager and coordinator over the electrical contractors and Aluminum buss bar installation in the Electrowhinning Facility. T his
includesaZinc CellHouse,MeltingandCastingand100KVHarmonic FilterandTransformerRectifierSubstation.
Coordinated with ABB with the installation of 100KV Transformers, Rectifiers and Harmonic Filter Yard up to start-up and
Commissioning. Construction Management over electrical contractors in the 400 Zinc Cell house, 500 Melting and Casting,
AjaxFurnace,Bag houseand Cooling Towers
8/2011 – 12/2012 SARGENT E LECTRIC COMPANY, Prime Contractor to IPR Global Contractor Management Company at
theV&M TWO LLC,7” FQM,New PipeMill in Youngstown,Ohio
Construction Field Engineer for Sargent Electric Company. We came on site in late July 2011 after the underground embedded
conduitductbankswereapproximately75%completedbyanotherelectrical contractor.
Another fast track project "engineering late, not complete with very aggressive construction milestone dates. "The cable schedules”
were broken down per area and other area’s not complete. There was no routing, no raceways designed or termination
information. The Engineering Company that issued the embedded RFC conduit drawings along with other electrical
installation drawings was no longer on the project when we started. Daniela, the Mill Builder is on site for assistance to

3. 3
answer questions through IPR. The Pipe Mill was assembled in Italy taken apart, crated up and shipped to this job site.
IPR/Kvaerner was responsible for the location of the electrical equipment and components for installation. After Sargent
position changed fromasub to Kvaernerto PrimeElectricalContractoritthen becameourresponsibility.
My role as the Lead Field Engineer has been pretty much been to help the lesser experienced electrician’s with the drawings, field
problems and to provide the electricians with the information theyneed includingmaking field sketches, spreadsheets and coordination
with IPR and other crafts so theycan complete their specific scope of work. We have had to use the original Danieli vendor drawings a
map for finding equipment, equipment, device locations in lieu of not having the electrical installation drawings. Attend most meeting
and take the project contemporaneous notes as their scribe. Attend all daily/weekly IPR construction meetings and IPR/V&M TWO
commissioning turnover meeting with Sargent’s QA/QC Manager. Coordination came from IPR who turned to Danieli (on site) as
needed and were helping direct our field supervision in lieu of complete Electrical Installation Drawings. Often had to go into the cable
schedules and pick up the holes in the cable schedules. Our field team had to work with what information we had, using our expertise
andexperience.
3/2011– 8/2011 AEROTEKENERGYSERVICES, A DIVISIONOF AEROTEKINC.
Contractedto McGraw/Kokosing,Inc.Middletown OH45044
Electrical Construction Field Engineer at the Sun coke Energy project in Middletown OH. New construction of a state-of-the-
art, environmentally friendly; Heat-Recovery Coke Battery capable of producing about 550,000 tons of coke along with 50 MW
of ElectricPowerannually.Thisfacilityislocated adjacentto AKSteel’sMiddletown (OH)Works.
“Worked and reported directlyto SteveParr“Kokosing AVPand Construction SiteManager.”
Another fast track project "engineering late and not complete with aggressive construction completion dates. “Writing new
cable schedules” with the latest and final elementary, schematic and connection diagrams being received from Jacobs Engineering on
a continuous basis during installation of electrical scope. This included Electrical (low and medium voltage switchgear; motor controls;
transformers) and I &C. The Turbine and the FGD areas were my main focus of completing all circuits’ w/terminations along with the
FGD Hamon Remote I/O-PLC Panel. Ensuring that the new cable database incorporated all new, revised elementary and wiring
diagramsonRFCCableSchedulesforinstallation.
Coordinated and resolved required data from the updated data from the updated database spreadsheets, drawings, EWO’s and RFI’s
for the planning and layout of work to complete as directed by the electrical supervision in the field. This information was needed to
supporttheaggressivescheduled milestonesforcompletion ofcontractual assigned projectscopeofwork.
9/2009– 9/2010 DSC - Defined SourceCooperativePhiladelphia,PA.19128
Contracted to Nitro ElectricCompany9/2009 –9/2010
Database Electrical Field Engineer at the Longview Power Plant, new 695 MW Supercritical Coal Fired Power Plant in
Maidsville, WV. "Parent Company-Gen Power" Aker Kvaerner Solutions – General Contractor joint venture partner with Siemens
Power Generation. Aker Kvaerner BOP. Siemens’ AQCS and Auxiliary Boiler Engineering. Responsibilities included but were not
limitedto:
Coordinated, resolved required data from the updated database spreadsheets, drawings, EWO’S and RFI’S for planning of work to
completetothe electricalsupervisioninthefield.
Provided hands on terminating and labeling information, supporting System Turnover and Start-up activities to expedite electrical
completion.
Generated production installed quantities reports on both a dailyand weeklybasis. Provided the electrical supervision for the Nitro’ site
and project manager with pertinent information needed to support the scheduled milestones for completion of our contractually
assignedprojectscopeofwork.
Coordinated, resolved and implemented electrical design expertise to provide onsite engineering assistance to assigning
cable termination identification from the elementary and connection diagrams and was able to input into the label making
process.Therefore,wewere ableto solvethisproblemwith thecabletermination informationmissing in thedatabase.

4. 4
8/2008– 6/2009CH2M HILL,FivePenn CenterWest,Suite300Robinson Township,Pittsburgh,PA15276
Electrical TechSpecialiston thefollowingprojects:
Nucor Steel Louisiana, LLC. St. James Parish, Louisiana Provided PreliminaryEngineering and a Cost Appropriation Estimate for
the electricalInstallationofanew MiniMill.GeneratedInstallationofanew MiniMill.GeneratedAutoCAD drawingsforthis estimate.
Mesabi Nugget Delaware, LLC. Generated on AutoCAD for the Medium and Low Voltage Equipment layouts, Single Line Diagrams
to support this fast trackengineeringandconstructionintegratedscheduleMilestones.
Republic SpecialMetals,Inc.RadialForgePlantNorth Jackson,Ohio GeneratedonAutoCAD drawingsfor the PowerDistribution
work withutilities.
Ellwood QualitySteels:NewCastleMeltShop,NewCastle,PA. Design Lead with upgradesin theexistingmeltshop
The Timken Company, Canton, Ohio, USA, Faircrest Steel Plant Design Lead on new Vertical Bloom Caster Engineered and
prepared a cost appropriation. Electrical Installation estimate along with preliminary engineering on AutoCAD.
Coordinated, resolved and implemented electrical field construction expertise to provide assistance with engineering to the
younger engineers and designers. Subsequently we were able to work constructability issues and come to agreement what
level ofdetail wasrequired on theinstallationdrawings.
3/2008– 8/2008 PritchardElectric CompanyInc.Huntington,WV 25703 Electrical DatabaseManager/Field Engineer
At the AEP John AMOS Coal Fired Power Plant in Winfield WV25213. DatabaseManager/ Electrical Field Engineer on the FGD
Retrofit Project on Unit 1, 2 and 3. Responsibilities included but were not limited to: keeping the Sargent and Lundy Access
Databaseupdatedwiththe latest revisionsby AEP andSargent andLundy.
2/2006– 3/2008DSC – DEFINED SOURCECOOPERATIVEPHILADELPHIA, PA
Electrical ConstructionEngineer(4/2007 -3/2008)
Contracted to Elm Road Services (A We Power, LLC Company) at the Oak Creek, WI Expansion Project – Elm Road Generating
Station Units 1 and 2, two 615 MW Supercritical Pulverized Coal Fired Units with a new Coal Handling System. We met our
scheduled completionin thefall of2007.
(EPC) Contractor was Bechtel Power Corporation, Frederick, MD. Supercritical Boilers – Babcock – Hitachi, Steam Turbine –
Hitachi LTDand AQCS–Alston.
Observing Bechtel and/or its Subcontractors during installation, Reviewing QA/QC Electrical installation to as sold specifications,
installation drawings, Set Route Database, NEC and all applicable codes, field verifying electrical completion to Bechtel’s latest P3
Schedule.Practiceand observe“safetywith high qualitystandards”
2/2006– 3/2008 DSC – DEFINEDSOURCECOOPERATIVEPHILADELPHIA,PA.19128
Electrical Construction/FieldEngineer(2/2006 -4/2007) Contractedto Nitro ElectricCompany
Electrical Field Engineer at the MidAmerican Energy new Unit No. 4, 890 MW First U.S. Supercritical Coal Fired PowerPlant in
CouncilBluffs,IA.BuilderHitachi –MitsuiandEnergyCompany,Kvaerner Singer,Inc. - GeneralContractor.
12/2005– 2/2006 Technical solutions,PITTSBURGH,PA. Electrical Field Engineer/SeniorElectricalCADDDesigner
Contractedto Lockwood Greene/IDC attheIBM HudsonValley ResearchParkComplexinFishkill,NY
3/2005– 11/2005AlltekStaffing and ResourceGroup,Inc. Pittsburgh,PA.
Contractedto R.T. Patterson Companyas ElectricalField Engineer/Inspector

5. 5
Electrical FieldEngineer/SeniorElectrical CADDDesigner
ForWheelingPittsburghSteel Corporationat the Follansbee,WVCoke Plant.
Contracted to CV Engineering as Electrical Project Manager on SeverCorr CSP Mill in Columbus, Mississippi. Responsibilities
included but were not limited to: prepared installation and Bid specifications, reviewed OEM and vendor electrical drawings anddesign
documents. Led engineering activities by priorities to support on site construction activities, checked drawings for constructability,
specificationsandrevieweddesigndocuments,makingrequiredchangespriortoissuingBid packages
01//2003 – 03/2005,12/2000 – 08/2001 AMEC-KAMTECH,Inc. ALPHARETTA,GA.
Electrical Field Engineer/CostEstimator
01/2003– 03/2005 AMEC-KAMTECH,(Ahlstrom –Dexter)WindsorLocks,CT
Electrical FieldEngineer/CostEngineerNo. 15PaperMachine.
01/200312/2003KAMTECHINC.(Bowater) Catawba,SC
Lead Electrical Field Engineer/Cost Engineer for a 1500 T/D Fiber line, a single vessel hydraulic digester with 4-stage
bleaching plant.
4/2002– 01/2003KAMTECHINC.(DOMINIONENERGY)POSSUM POINT,VA
Lead Electrical Field Engineer/Cost Engineer for a Combined –cycle electric generating facility. Project consisted of 2-GE 7FA
GasFired Turbines,1200MW SteamTurbine.
12/2000– 08/2001 KAMTECHINC.(SanteeCooper)ANDERSON,SC
Electrical Field Engineer oversaw the construction (electrical and instrumentation installation) of an 800 MW Combined
Cycle/Simple Cycle power generation facility consisting of a 500 MW Combined Cycle Gas Fired GE Turbine Generator
Systemand two GE Frame 7F 150.MW SimplecycleGEturbinegenerators.
.
8/2001 – 04/2002 PENPOWER INC. (Dominion Energy) Shelocta, PA. Lead G...E. Electrical Field Engineer –
Superintendent/Inspector for 4 - 7 FA'S simple cycle units. Responsible for the G. E. as-built access cable database, its
distribution to thefield andfinal as-builtdocumentationturnoverto thecustomer“ahead ofschedule.”
06/1999- 12/2000 R.T.Patterson Company, Inc.Pittsburgh PA
ElectricalDesignGroupLeader/FieldEngineer
Assigned to the followingprojects;
● AK Steel – 5-Stand coldmill/tandemmillpinionandmorgoilsystem upgrade.
● US Gypsum Plant – AliquippaPA – field assignmentwithSargentElectric asanassistant projectmanager/schedulerand
Systems turnover of over 80 systems, 8200circuitsand72,000terminations
● US Steel – ET Works, BraddockPA – BOF slagsplashingproject.
 NWS & Wire Co, Sterling,IL – workedwith FluorDaniel’s,NipponSteelCoandDanieli
01/1988– 06/1999EichleayEngineers,Inc.Pittsburgh,PA
ElectricalProjectleader/FieldEngineer/Inspector
Assigned to the followingprojects;
● AK Steel RockportWorks – SingleStand TemperMillandRollShop
 US Steel Fairfield,Alabama - TraveledtoBrazil for inspectionandtestingof GE Motorsfor Q-BOPProject
 ArmcoSteel Butler PA – No. 3 FumecollectionSystem,No. 3 EAF Pulpit andNo. 2 Caster Upgrade
 TuscaloosaSteel –SMSContinuousSlabCaster
 NationalSteelCorporation/GreatLakesDivisionCokeBattery – FieldAssignment,check-out,start-up
 Inspection offire damageand restorationsomesixmonthsaftercommissioning
 US Steel ET Works – Skip InclineUpgrade
 Contraves USA – Wampum MineOpticalFacility

6. 6
Weirton Steel – SMS 4 Strand Slab Caster and BOP ID fan upgrade required, rewinding existing motors (inspection and witness
testing) at the WestinghousePlant inJohnstownPA
 ArmcoMansfieldOH –Z – MillRevamps
 AlcoaDavenport – 103” ColdMill
1974– 01/1988PriorEngineeringand ConstructionExperienceAvailableUpon Request
EDUCATION
1978– 1980- AssociateDegree,BusinessAdministration,WheelerSchool,Pittsburgh,PA
1975– 1977- AssociateDegreein Drafting&Design Technology, ElectronicsInstitute,Pittsburgh, PA
Professional Training: ComputerSkills:
OSHA 10 Hour 2008 EngineeringDrawingManagementSystem
QualityAssurance/QualityControl MicrosoftWord MicrosoftPowerPoint
ClaimsManagementSeminar MicrosoftExcel MicrosoftAccess
NationalElectric CodeSeminar AutoCAD – CAD PLUS AutoCAD 2008
Cost/Risk ManagementSeminar
MILITARY
12/1968 – 01/1971 U.S. Marine Corps- Honorable Discharge, Communications Center Man/Operations Manager. This position
requiredholdingaFinalTopSecretCryptoSecurityClearance(notactive).