1. Vincent Ivor Lee O’Dell
Profession : Professional Electrical Engineer
PRC ID No. : 2900 Reg. Date: 10/06/1994
Home Address : Lot 20 Road 28 Phase II Cogeo Village, Antipolo City
Office Address : P.O. Box 89426 Riyadh, Kingdom of Saudi Arabia
Telephone No./Home :
Globe : 09064790524 (Philippines)
Office : (+966-1) 479-0170 Ext. 654
Mobile : (+966)556197739 (Saudi Arabia)
E-mail : veodell@hotmail.com
phibeep@yahoo.com
Work Experience
Company : ABV Rock Group KB May, 1998 – Present
address : P.O. Box 89426 Riyadh, Kingdom of Saudi Arabia
Positions Held:
A) Technical Scrutinizer, Bid Tendering & Estimating Group
Project Start-ups for High Rise Buildings, Government Housing Projects,
Hospitals, Industrial/Petro chem. Plants and School Building:
1) Review Technical Requirements of Bid Invitations and prepare Bid
Tender Documents. Per Project Scope of work.
2) Prepare Bid Proposal Drawings for Turn key Projects Base on
Project Technical Requirements: a) Lighting Layout, b) Small Power
Layout, c) Electrical Equipment Layout, d) Single Line Diagram, e) Cable
Sizing Calculations, f) Illumination Calculations, g) Earthing Layout and
h) Lightning Protection ), I) Control and Safety Layout, j) 13.8 Kv Power
Distribution Layout.
3) Prepare Material Take Off for Bid Cost Estimates.
B) Technical Scrutinizer, Design Close Out Group
SSSP Site 6 Abha Site Close Out.
1) Prepare Design Advice Notes for outstanding Warranty Group Site
Queries, Repair Requests, Clarification Request and Non Conformity
reports.
2) Prepare as built drawings for on going warranty works.
3) Updated Technical data sheets, Spare parts list to show latest
equipment supplier part numbers and replacement parts of
discontinued spare parts.
1 of 6

2. 4) Updated Vendor Drawings for show drawing reference to Site
drawing.
5) Updated Booster Station Power Generation Drawings due to
warranty replacement of Generator Units.
C) Engineer (Electrical and Electronics), Technical Support,
Warranty Group (Site 5).
1) Review, revise and approve construction drawings for System /
upgrade and/or fitment of updated OEM Spare parts.
2) Prepare Technical Documents / Correspondence to equipment
vendors for equipment warranty claims, sourcing of spare parts,
replacement of defective / faulty equipment.
3) Prepare Design Advice Notes / Proposals for Additional / Deleted
Items as per request / comments from Client (ARAMCO).
4) Update construction drawings and archive documents as Final As-
built for handover to Client (ARAMCO).
5) Assist in equipment start up / Commissioning of new / replaced
equipment.
D) Technical Scrutinizer (Electrical and Electronics), Field Engineering
Site 5.
1) Troubleshoot, Prepare and Implement Solutions/Drawings for
Electrical, Instrumentation & Control and Safety System
Commissioning Problems/
Punchlists.
2) Evaluate Client warranty Claims as to Contract/Warranty Coverage.
3) Update Drawings for Final as Built.
4) Update reference Documents, e.g. Cable List, Instrument List, PLC
Software/Data Base List and Electrical Equipment List.
5) Assist in Preparation of Maintenance and Operating Procedures for
13 .8kV Switchgear.
6) Prepare Requests for Claims to Equipment Vendor/Supplier regarding
Equipment Documentation and Final hand-over.
E) Technical Scrutinizer Installation, E&E.
1) Evaluate Drawings/ Design for Compatibility with equipment Installation
Requirement and Site Conditions.
2) Evaluate Control/ Power supply interface compatibility between equipment
from separate vendors.
3) Review equipment Data Sheets Prior to Purchase, Propose Data Sheet
Changes for Equipment to Meet Existing Site Conditions and Project
Requirements.
2 of 6

3. 4) Review Project Documents e.g. Cable List, Bulk Material List for Consistency
with Drawings and Data Sheets Prior to Purchase.
5) Prepare and Propose design revisions to meet equipment installation and
operational requirements.
6) Update Drawings for Implementation of all approved changes/drawing
deviations.
7) Evaluate Client Claims and Request for Validity/Consistency with Scope of
Work.
8) Prepare Claims to Materials Supplier/ Vendor regarding Balance of
Deliveries per Purchase Orders.
F) Electrical Engineer, Installation E&E (Site 5).
1) Prepare Material Take Off for purchase.
2) Collect and review Drawings/Documents for Release /Implementation
to Jobsite.
3) Assist in field construction, regarding Quality Control/Material Control
Requirement.
4) Prepare Drawing Mark-ups for all implemented drawing revisions.
5) Prepare Shop / Fabrication drawings for Client approval. Shop drawings are
attached as to proposals for revisions / additions to Typical Installation Detail
drawings which are revised due to clashes in installation and other site
conditions.
Company : Ramcar Group of Companies May 1997-April 1998
address : Ramcar Center, 80-82 Roces Avenue, Diliman, Quezon City, MM.
Position Held:
Electrical Engineer, Corporate Planning.
For Construction of Main Corporate Office in Roces Ave., Quezon City and Agus
Industrial Estate in Sta. Maria, Bulacan.
1) Evaluate Material/Technical Services Quotations of bidders and various
Suppliers.
2) Review Plans/Drawings Prepared by Hired Architectural/Consultancy Firm
for various Company Expansion Projects.
3) Investigate/Evaluate frequent recurring breakdowns in various company
operated plants.
4) Assist Planner in updating construction activity schedule.
3 of 6

4. Company : Parson’s Engineering LTD. Jan. 1996-Aug. 1996
address : 10/F Rufino Pacific Tower, 6784 Ayala Avenue, 1226 Makati City,
Philippines
Position Held:
Senior Electrical Engineer Construction Management
1) Conduct Quantity inspection for Accomplishment Claims by Contractor.
2) Review Contractor shop drawings prior to final implementation.
3) Evaluate proposals for specification /drawing deviations from contractor.
4) Assists Planner in updating construction activity schedule.
Company : Semirara Coal Corporation Jan. 1991-Dec. 1996
address : Semirara Island, Caluya, Antique
7/F Quad Alpha Centrum, 125 Pioneer St., Mandaluyong
Metro-Manila
Positions Held:
Panian Design Group Manager (Electrical)
1) Prepare conceptual design for feasibility study of Panian Mine Development
Project.
2) Prepare budgetary cost estimate for electrical safety and control system
requirement for the propose continuous mining and fill Dewatering Equipment.
General Foreman (Electrical Operations).
1) Supervise overall mine pit electrical system.
2) Implement electrical and control system require for all mine development
projects.
3) Commission start-up and completed mine development projects.
4) Plans and implement all mine pit electrical maintenance programs.
Electrical Foreman (Electrical Operations)
1) Supervise shift operations: conduct equipment trouble shooting in case of
Breakdown.
2) Performed power change-over, emergency bus tie-ups in cases of powerplant
Power interruptions and mine development project connections.
3) Plans and implement excavation line no. 2 maintenance activity.
4) Supervise all line no. 2 mine development project.
4 of 6

5. Other personal information:
Citizenship : Filipino
Birth date : September 5, 1962
Status : Married
Passport No. : WW0138563
SSS No. : 0806751207
Phil. Health ID No. :190250426708
OFW ID No. :03 0449800
TIN No. :138 933 906
Driver’s License no. :F03-81-0086-41
Honors and Awards:
Third (3rd
) Place Associate Electrical Engineer-Board Examination
Seventh (7th
) Place Assistant Electrical Engineer –Board Examination
National State Scholarship Award
Computer Skills:
Auto Cad Release 14
Excel
Microsoft Word
Corel Word Perfect 8
Microstation
Other Particulars:
References:
Gösta Söderborg
Site Manager, Site 6, Abha
ABV Rock Group KB,
P.O. Box 89426 Riyadh, Kingdom of Saudi Arabia.
Tel. No. +966-7-482-6878
5 of 6

6. Peter Hausner
E&E Superintendent
Site 3 Installation Department
ABV Rock Group KB,
P.O. Box 1684, Burayda, Al-Qassim, Kingdom of Saudi Arabia
Tel. No. +966-4-847-6067
Filomeno Ecraela
General Manager
Four E Steel Builders
No. 35, Villa Angelica Subd. Camarin,
Caloocan City, Metro-Manila, Philippines
Tel. No. 0917-8031799
I hereby Certify that All Information above are True and Correct to the Best of my
Knowledge.
Vincent O’Dell
6 of 6

7. Peter Hausner
E&E Superintendent
Site 3 Installation Department
ABV Rock Group KB,
P.O. Box 1684, Burayda, Al-Qassim, Kingdom of Saudi Arabia
Tel. No. +966-4-847-6067
Filomeno Ecraela
General Manager
Four E Steel Builders
No. 35, Villa Angelica Subd. Camarin,
Caloocan City, Metro-Manila, Philippines
Tel. No. 0917-8031799
I hereby Certify that All Information above are True and Correct to the Best of my
Knowledge.
Vincent O’Dell
6 of 6